Why, hello there!
First of all i would like to apologize for two things:
(1) My English is awful so bear with me please!
(2) I couldn't find an answer for this question and i tried really hard. So if there does exist an answer please point me to it nicely
Now, concerning my problem.
I have bought Elephone P8 from Banggood . com
(link could not be uploaded cause i am a new user)
(if you want to view the phone go to Banggood and searh for Elephone P8 :angel: )
From Day 1 I have had a problem with my screen. It touches itself!!
I didn't do anything for that problem as i didn't believe it could be possible for a phone to touch the screen itself.
Now into details:
When i unlock my phone and use it after a couple of minutes (i have enabled the option to view the clicks on the screen) i see thousand clicks on my touchscreen in a vertical line. From the speaker (where you talk) to the home button. It is always in the same line!!
And when i close the display of my phone and unlock it again, the thousand clicks stop and the phone works normally again.. :/
I know that it is hardware problem because i have changed roms, i have rooted and i did all i could to fix it softwarely! :fingers-crossed: SO i am convinsed it is Hardwared reallated issue! :victory:
MY QUESTION IS:
How can i fix this problem if i want to open my phone?? If i change the glue between the glass and the LCD will it fix it??
Please , please , please! Don't tell me to send it back and ask for a new one OR take it to an expert to fix it!
THANKS A BUNCH GUYS!!!
It could (!) be just some stress on the Screen. Maybe you could do something if you just disassemble it, look where the stress could come from, and put it together again after that.
I had that a few years before, and for me was the Solution to bend the Case a bit, in which the Screen was pressed.
Hopefully that works for you
Thanks for your reply man! I really appreciate it!
Now that you mention it, when i dissasembled my phone i couldnt unscrew the last screw that is attaching the motherboard to the screen. It was so hardly screwed!
Maybe that little screw does the job, so i will try and unscrew it!
ONE MORE THING
If for some reason i can't find the pressure point from inside the phone, what other options do i have?? Since i have scratched the front glass a bit, i am in the temptation to change the front glass and clean the Screen a bit.
What do you think?
P.S.: Further advice is very much appreciated!
Related
hi to all,
i have this O2 XDA2 when i powered on the phone it begun to hang up then i can't press or use the PDA...even i removed the the battery and put it back always hangs...so i tried hard resseting it but after that always ALIGN SCREEN now apprears on the screen...
hope that anyone here has a solution to this problem...thanks and merry christmas
this problem is same as the problem i posted is the WALLABY section...
o2 xda2 always start with screen align
please pleasE help me
my o2 xda¡¡ always start with align screen
Happened to mine too. The touchpad was busted, you can't get past the align screen as the touchpad isn't accepting any input.
same problem here,are there some one can help?
make sure you press the + sign perfectly in middle
omg try to understant the ques.
the same prob happens to me..... the align screen appears many times to me and it wil reinstall new OS. so then it looks new ans lost all old settings & mess, contacts.
how to stop this bug?
yeap i now have the same problem, dont know what happen to my touch screen.. i can press the upper section windows bar, signal and all kind that is on top
can anyone help please?
Like it was said before, your touchscreen is busted ... in my case, i've change my lcd and touchscreen with one bought on ebay. But before to change your lcd, you can try to align your screen with your finger, not with your stylus.
Just put an empty welcome.not file in your SD card.
It should bypass the alignment screen.
If it doesn't, then do one alignment run,hit the power button, and turn it back on. It should work then.
Beware, though, that the screen will be unaligned. Manage to get to the alignment again, and repeat the process (hitting power button thing). Then it'll be aligned correctly (at least in my case it does...)
As Huefu posted the touchpad is dead my friend. There is another topic about the touchscreen being dead that I have posted on. You can buy one on ebay but beware there are two different screen types. So dismantle first to check the connectors on the back of your screen to make sure you get the right replacement.
Your looking around £30 and some patience. It's tricky to take the phone apart and reassemble. You can google for the XDA/MDA service manual, this will show you how to take it apart
Good luck
2 Years Ago i´ve got the Same Problem....I opened my Himalaya
and there was a bigger Piece of Tobacco (I´m Rolling my Cicarettes by myself)between the Screen and the Housing- you couldn´t see it from Outside.
...for my case this was the solution !
and this Year my Himalaya is getting 5 Years old
I would try this first before Buying a new Screen
...but ...as honosuseri mentionened before
There different Models with different Connectors
(i think 2 or 3 different Connectors)
watch out ! DOOD!
Hi guys, some months ago my htc is fall by my jeans and it break down. So i've buyed an lcd by brando hk (the same that sell screen protector) an lcd with digitalizer. Ok the pack arrive, i replace the lcd and is perfect. Work every etc. I had used for 1 day and some hours.. The next day i tidy up, start the htc and ok. I put in standby by pressing the button on the top.. After some minutes i re-press that button for use it because i've received a sms and don't work. So i reboot the phone, and nothing. It is only the lcd that don't work, because the feedback vibration work, if i call my phone ring and etc etc. But i don't see nothing. So very very angry i shutdown the htc. The next day again i try to use it and make the same play. So i contact the brando hk and ask to send me another lcd + digitalizer. They ship to me. Arrive, i replace it again. I use that for 30minutes and after make the same problem -.-" again, and again, and again. Guys please help me, i want re-use my fabolous phone
I don't think that is a software problem, because i've changed different rom and make a lot of full reset.
Thanks anyway
Nobody guys? |:
No one? ._.
Rules
Lilith_v2 said:
No one? ._.
Click to expand...
Click to collapse
Whilst I do appreciate that you are experiencing a problem on your phone, and you would like some help from the good people on this forum, please follow the rues, and do not post the same threads on different sub-forums.
You have posted the exact same link on TOUCH HD ACCESSORIES and the TOUCH HD GENERAL.
As for your problem, the only thing I would suggest is that your LCD may be working fine, but your motherboard maybe faulty, causing the display to fail from time to time. How old is the phone?? If less than a year, just send it back to your supplier for a repair under warranty. (Obviously reflash the original stock ROM before you do!!).
so, i just got this phone about a week ago, and its already seen several near death experiences with all the flashing ive been doing. but this one takes the cake. all i did was put the phone in my back pocket, with the screen facing in, sat down for half a second, and when i took it out, the screen had been pressed so hard that the top layer of the resistive screen was stuck to the bottm, and not registering anything. i knew the first step to fixing it was getting it unstuck. but it still wounldnt work. did a hard reset. and now im stuck at my initial tap screen to set up phone screen, and i cant do anything. this is clearly a hardware problem. can anyone help me out?
lemme be the first to say it man, ouch lol
sorry about your screen, i fear the only way to fix would be to find another screen assembly, if you search the threads for the cdma raphael(herman) i beleive there is a detailed teardown of the phone that may or may not help you resolve your problem. here is a quick link to something along the lines of what your looking for but not really too detailed : http://www.ifixit.com/Teardown/HTC-Touch-Pro/787/1
ive done that, but usually break the screen completely. i have an extra us cellular tp that has a bad keyboard and front panel buttons but screen and touch works. i just use it as a extra battery charger. has some scratches, but works. ill send it to you if you send me your old one. the screen has a double-stick tape that holds it to the frame around the edges. let me know if your able to tear it down and think you can put it back together again. its a pretty straight forward process though.
Apply packing tape to the screen and pull as hard as you can.
Hello Guys,
I have just received my G-Tab and I only even start it two times, first time before applying the screen protector and the second time after applying it, I left the protector to dry all night long as per instructions and left the charger attached to the tab, in the morning it reached 98% and the protector was good to go (it is a wet screen protector).
After navigating on the stock ROM, and playing angry bird (I have the woot version), I left it a while and then next time I checked it, screen was showing very disturbing colors, I feel like there are missing colors on the screen.
I hadn't installed anything yet, didn't even used any custom ROM it is still with its original ROM.
I have tried to reset the device but the problem persist.
Navigation on the Recovery console showing correct colors but as soon as I exit it, back to its current state, showing very anoying colors even from the first screen of Viewsonic logo!!!!
Need help guys, I paid double its actual price to get it here to me in Egypt (
Even replacement is a very bad choice to me...
Very disappointing!!!!!!!!
Still waiting an answer guys?
Should I jump and open the tab and check the video cable or is it a software problem?!!
OHHHH My God!!
I was trying the “Love Tab” method described in this Post:
http://forum.xda-developers.com/showthread.php?t=878624&page=2
Look into post #20.
And YES, it appears that is the solution…
Oh My God, how would that be true what a QA they have at VS….
It gets back to where it was now, the faulty colors, the same time I’m writing this post, I think I will need to open it and check the cable directly (WTF, I have just received it, out of the box)..
Bye Bye ViewSonic, you have just lost a loyal customer!!
Will appreciate if someone helps me to decide to open it myself or ship it from Egypt to US and let them do it…
Fixed..
I have attached a photo of the cable as soon as I managed to remove the board a little bit, as you can see from the image the cable wasn't that loose but I see it was some kinda twisted so I straighten it a little bit and pressed hard on both side of the cable and made sure that they are correctly aligned and connected and voila, screen now is BACK..
I would say that I doubt that my tablet wasn't that new, as I felt when I was unscrewing the board, it was already open I think it was returned fixed in quick and put it back as new, Thanks VS that would be the last time I buy anything from them.....
For Reference I have used these 2 videos as a guides:
http://www.youtube.com/watch?v=PswxJ96gXbs
http://www.youtube.com/watch?v=9M7lxllGOyc&feature=related
As well as the previous post:
http://forum.xda-developers.com/showthread.php?t=878624&page=2
Post #20
Thanks guys...
Thx XDA..
Hi everyone,
I'm new posting here but i folow some tips and tricks from this forum along ago.
First sorry if my English is not always correct i now it... I am Portuguese.
I need some help with my xperia Z2, i wil describe step by step:
The touch of Z2 broken and after that booth LCD and Touch doesnt do anything, no image no light and no response from touch but the phone turns on and off, so I change booth lcd and touch from a official seller but it still almost the same no light and no image, it still turns on and now i ear the touch working but i do know what i am touching i can see nothing in the lcd... Then i replace the main flex thinking it could be a problem with the cable but it still the same... I tried to flash some roms and update with pc companion and all worked fine except the lcd stills the same... no image and no light... Someone can help me i dont know what to do now i about to selling it for pieces its all new in this phone except the mainboard... could be a problem in the board???
I almost forgot, it receives calls and sms but i dont see anything... i think all the function are ok just the image not.
I searched for hours in this forum something like this but i didnt found anything, i tried some tricks like the rubber and power + vol up but didnt worked. Help please before i sell it for peaces.
Greetings to all.
Sounds like the board to me, you've changed everything else so it doesn't leave anything else really
I think this can be closed if there is no more solutions... i tried everything... if anyone needs pieces for a xperia Z2 just tell me i have a new touch and lcd mounted on it i think someone could use the case of it... the board just for pieces its damaged.