please help
my device t6ul international versin .after flash vipermax rom in device when booting brick and stop on viper logo
i tried becuse i have this problem in other custom rom and stock rom flashed
my device rooted and unlocking bootloader and s-on
hboot 2.46.0000
radio-4t.21.321804b
reza.farokhian said:
please help
my device t6ul international versin .after flash vipermax rom in device when booting brick and stop on viper logo
i tried becuse i have this problem in other custom rom and stock rom flashed
my device rooted and unlocking bootloader and s-on
hboot 2.46.0000
radio-4t.21.321804b
Click to expand...
Click to collapse
Since your s-on. After wiping then flashing Viper. Did you flash the boot.img in HBOOT? Since you are s-on. You must flash the boot.img of each rom in HBOOT everytime after flashing rom in recovery.
Related
Guys, please help me.
I recently rooted it but haven't done nandroid backup yet, and i install chainfire 3d but then my phone won't pass the splash screen, after the htc logo it turns black. please tell me what should i do. i have H-BOOT 1.19, RADIO 1.12.11.0809, bootloader unlock, twrp installed.
Regards,
Deny A
den_piero said:
Guys, please help me.
I recently rooted it but haven't done nandroid backup yet, and i install chainfire 3d but then my phone won't pass the splash screen, after the htc logo it turns black. please tell me what should i do. i have H-BOOT 1.19, RADIO 1.12.11.0809, bootloader unlock, twrp installed.
Regards,
Deny A
Click to expand...
Click to collapse
flash a new Rom.
Sent from my EVO using Tapatalk 2
flex360 said:
flash a new Rom.
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
Thank you for the quick reply, but i don't really understand which ROM should i flash. Can i just factory reset? and do the OTA?
Chainfire is not supported on our evos, you will soft brick every time. You have to flash a new Rom. Either flash a Rom and kernel separately or flash a Rom with kernel installer like meanrom
om4 said:
Chainfire is not supported on our evos, you will soft brick every time. You have to flash a new Rom. Either flash a Rom and kernel separately or flash a Rom with kernel installer like meanrom
Click to expand...
Click to collapse
om4, thank you for the reply. I've read your Dont' Panic thread, would it be possible to flash the boot.img alone? can i flash with the latest RUU ? or is there a latest stock ROM available, because i only get from search is the previous stock ROM
2.13 stock deodexed with root
om4 said:
2.13 stock deodexed with root
Click to expand...
Click to collapse
Thank you very much om4, the link in OP thread is dead but i can manage to find Captain_Throwback link.Do i need to relock the bootloader? and I still need to flash the kernel after i flash it with the deodex stock right?
If i decide to go with the mean rom, should i re-lock the bootlader or just straight flashing the rom after clean wipe and factory reset?
If you flash meanrom you don't need to relock bootloader. Only relock the bootloader if you are getting ready to flash ruu or if you are trying to accept an ota. To accept an ota you would need a stock Rom and recovery before relocking bootloader
om4 said:
If you flash meanrom you don't need to relock bootloader. Only relock the bootloader if you are getting ready to flash ruu or if you are trying to accept an ota. To accept an ota you would need a stock Rom and recovery before relocking bootloader
Click to expand...
Click to collapse
Thank you very much sir, you've been very helpfull. Thank you
I have flashed Revolution HD 6.2 on my HTC One X+.
Now I want to go back to Stock but I don't know how. According to this Post I downloaded a file called "RUU_ENRC2B_U_JB_45_HTC_Europe_1.17.401.1_Radio_3.1204.168.32_release_299688_signed" and tried to install it, but it tells me it cannot flash my device. What else can I do?
Please help!
htconexplus said:
I have flashed Revolution HD 6.2 on my HTC One X+.
Now I want to go back to Stock but I don't know how. According to this Post I downloaded a file called "RUU_ENRC2B_U_JB_45_HTC_Europe_1.17.401.1_Radio_3.1204.168.32_release_299688_signed" and tried to install it, but it tells me it cannot flash my device. What else can I do?
Please help!
Click to expand...
Click to collapse
as always, run the RUU while the boot loader is locked. Make sure the device ID matches. If it is locked already unlock, flash your stock recovery RELOCK and try again.
This would be my 1st reply...
Can some one help me for this.
I do unlocked, flash boot, flash recovery (Failed alot of time due to not for ONE X+ version), now using TWRP to 2.3.3.0 (AT&T/Telus and INTL)
After that I want to flash custom ROM ( http://forum.xda-developers.com/showthread.php?t=1987885 ( Android Revolution HD 6.2 ), and flash the Boot.img for 6.x.
Then I not start flash custom ROM yet, and do NANDROID from TWRP.
So is that my boot.img is stock boot? Because I want keep NANDROID Backup.
And now I using HCT__044 1.17.707.1, found that RUU not available yet, so cannot get back from STOCK ROM.
Can someone upload this version for me for the boot.img if mine one is custom boot.img...
Thanks & Regards
xdacalvien said:
This would be my 1st reply...
Can some one help me for this.
I do unlocked, flash boot, flash recovery (Failed alot of time due to not for ONE X+ version), now using TWRP to 2.3.3.0 (AT&T/Telus and INTL)
After that I want to flash custom ROM ( http://forum.xda-developers.com/showthread.php?t=1987885 ( Android Revolution HD 6.2 ), and flash the Boot.img for 6.x.
Then I not start flash custom ROM yet, and do NANDROID from TWRP.
So is that my boot.img is stock boot? Because I want keep NANDROID Backup.
And now I using HCT__044 1.17.707.1, found that RUU not available yet, so cannot get back from STOCK ROM.
Can someone upload this version for me for the boot.img if mine one is custom boot.img...
Thanks & Regards
Click to expand...
Click to collapse
If you do a stock Backup you need to do it prior any rom or boot.img been flashed and keep it safe...
are you sure you are 1.17.707.1? can you post your hboot version etc
---------- Post added at 08:21 AM ---------- Previous post was at 08:12 AM ----------
htconexplus said:
I have flashed Revolution HD 6.2 on my HTC One X+.
Now I want to go back to Stock but I don't know how. According to this Post I downloaded a file called "RUU_ENRC2B_U_JB_45_HTC_Europe_1.17.401.1_Radio_3.1204.168.32_release_299688_signed" and tried to install it, but it tells me it cannot flash my device. What else can I do?
Please help!
Click to expand...
Click to collapse
What is your CID? more info is always handy
kotag82 said:
If you do a stock Backup you need to do it prior any rom or boot.img been flashed and keep it safe...
are you sure you are 1.17.707.1? can you post your hboot version etc
Yes, I use CID Getter and fasboot getvar all
ENRC2B_U_JB_45
romver" 1.17.707.1
BootLOdder: 1.35.0000
Cid: HTC__044
Carrier: HTC-Asia-SEA-WWE
Baseband: 3.1204.168.32
I updated OTA till now without update Camera for today.
And few hours ago, I already root to ARHD 6.2.
Click to expand...
Click to collapse
kotag82 said:
If you do a stock Backup you need to do it prior any rom or boot.img been flashed and keep it safe...
are you sure you are 1.17.707.1? can you post your hboot version etc
Yes, I use CID Getter and fasboot getvar all
ENRC2B_U_JB_45
romver" 1.17.707.1
BootLOdder: 1.35.0000
Cid: HTC__044
Carrier: HTC-Asia-SEA-WWE
Baseband: 3.1204.168.32
I updated OTA till now without update Camera for today.
And few hours ago, I already root to ARHD 6.2.
Click to expand...
Click to collapse
To go completely to stock you need to flash backup you made prior flashing (if you did any) and flash boot.img from backup via fastboot... Only you need stock recovery more but... I can give you only from our WWE CID HTC__001
If you have no backup you need to wait for RUU
kotag82 said:
To go completely to stock you need to flash backup you made prior flashing (if you did any) and flash boot.img from backup via fastboot... Only you need stock recovery more but... I can give you only from our WWE CID HTC__001
If you have no backup you need to wait for RUU
Click to expand...
Click to collapse
Well, thanks for your help, but it still need stock recovery, without RUU, all is impossible right now..
Any time after updates to new firmware 1.14.xxx.x to 1.17.xxx.x, so the old stock 1.14.xxx.x RUU were unusable, am I right?
I search google also cannot extract from ROM.zip (RUU) yet too...
xdacalvien said:
Well, thanks for your help, but it still need stock recovery, without RUU, all is impossible right now..
Any time after updates to new firmware 1.14.xxx.x to 1.17.xxx.x, so the old stock 1.14.xxx.x RUU were unusable, am I right?
I search google also cannot extract from ROM.zip (RUU) yet too...
Click to expand...
Click to collapse
If you have that OTA which updated your hboot there is a stock recovery, why do you need to go to stock?
kotag82 said:
If you have that OTA which updated your hboot there is a stock recovery, why do you need to go to stock?
Click to expand...
Click to collapse
Just incase when it need to send warranty, keep the STOCK ROM for safe..
Still noob, alot of things need study...
if you need 1.17.707.1 http://forum.xda-developers.com/showthread.php?p=35958152#post35958152
Hello all.
So, I have HTC Rhyme and i installed custom rom on it and now when i want to go to stock rom i can't because i haven't done backup.
When i try to install with RUU it fails.
Any help for geting to stock rom or installing custom rom that is okay?
Snorlax031 said:
Hello all.
So, I have HTC Rhyme and i installed custom rom on it and now when i want to go to stock rom i can't because i haven't done backup.
When i try to install with RUU it fails.
Any help for geting to stock rom or installing custom rom that is okay?
Click to expand...
Click to collapse
You have First Relock your boot loader ..And try installing by ruu its works..
htc one max boot unlock and s-off İMEİ NULL
MODEL T6UL
HTC 0P3P510
S-OFF
alper34 said:
htc one max boot unlock and s-off İMEİ NULL
MODEL T6UL
HTC 0P3P510
S-OFF
Click to expand...
Click to collapse
You seem to have flashed a custom ROM using CWM.. CWM has problems, flash TWRP recovery to your phone and flash the same ROM via TWRP
pradeepvizz said:
You seem to have flashed a custom ROM using CWM.. CWM has problems, flash TWRP recovery to your phone and flash the same ROM via TWRP
Click to expand...
Click to collapse
I've installed many ROM
Is it safe/OK to flash/update my radio and firmware?
My ATT HTC One get bootloader unlocked and customized recovery to CWM and then rooted. flashed with CM11 and I believe it is still S-on.
Radio4.4.2 ATT OTA/4.18.502.7) Radio_4T.24.3218.09_10.26.1718.01L
Firmwarelatest) ATT 4.4.2 OTA/4.18.502.7 Custom Firmware (Stock Boot.img and Stock Recovery removed)
from this post, http://forum.xda-developers.com/showthread.php?t=2419699
leo_cheng said:
Is it safe/OK to flash/update my radio and firmware?
My ATT HTC One get bootloader unlocked and customized recovery to CWM and then rooted. flashed with CM11 and I believe it is still S-on.
Radio4.4.2 ATT OTA/4.18.502.7) Radio_4T.24.3218.09_10.26.1718.01L
Firmwarelatest) ATT 4.4.2 OTA/4.18.502.7 Custom Firmware (Stock Boot.img and Stock Recovery removed)
from this post, http://forum.xda-developers.com/showthread.php?t=2419699
Click to expand...
Click to collapse
From your link
FIRMWARE FAQ:
Q: Do I need S-OFF for firmware flashing?
A: YES!
Q: Do I NEED to update my firmware?
A: NO! But doing so ensures optimal phone performance.
Click to expand...
Click to collapse
With s-on you can only flash original signed firmware, such as the firmware.zip extracted from the OTA package.
After flashing signed firmware you will need to reflash the custom recovery and rom zip to restore the kernel.
cschmitt said:
With s-on you can only flash original signed firmware, such as the firmware.zip extracted from the OTA package.
After flashing signed firmware you will need to reflash the custom recovery and rom zip to restore the kernel.
Click to expand...
Click to collapse
Thanks!