Please guys, can anyone help me with a solution here ? I installed a theme which was unknown to me, not meant for the custom rom i was using, it did make the device unstable, then later, i got it back working, but now, each time i switch it on, on the welcome screen that displays " Samsung Galaxy Tab 10.1" there is a yellow triangle with the sign " ! " inside of the yellow triangle, below the " Samsung Galaxy Tab 10.1" welcome message, anyone got an idea what it is and how to get rid of it ? Please i really need your help here guy. I couldn't take screen shots but i will use a phone later. Ok i managed to attach the icon i see the " Samsung Galaxy Tab 10.1" welcome message when loading the OS.
If you have access to download mode, then use Odin and revert back to stock. Your title of your thread should be changed to , you bricked your tab not the theme.
If your not sure how to use Odin or where to get a stock file then read through this thread.
http://forum.xda-developers.com/showthread.php?t=1445142
Samdroid_G_S said:
If you have access to download mode, then use Odin and revert back to stock. Your title of your thread should be changed to , you bricked your tab not the theme.
If your not sure how to use Odin or where to get a stock file then read through this thread.
http://forum.xda-developers.com/showthread.php?t=1445142
Click to expand...
Click to collapse
I used Odin to flash stock but it wouldn't go out, i have flashed stock recovery several times, any more idea what to do please ?
yes. the theme didnt soft brick your tab. you did. and you do need to flash to stock with odin to get rid of that triangle. you said you did that and it didn't "go out"??? what is that supposed to mean dude? you need to flash to stock.
Hi
My S3 is stuck on the initial screen that says Samsung Galaxy S3 GT-19300. It has been like that since I got up. If I press the on/off button nothing happens. If I press it for a long time it the screen goes of for about a second then the same screen appears. I tried taking the a battery out put it back in switched on and the same screen appears. When I connect the phone to my laptop my laptop does not recognise the phone.
Please help
Ally
anm1966 said:
Hi
My S3 is stuck on the initial screen that says Samsung Galaxy S3 GT-19300. It has been like that since I got up. If I press the on/off button nothing happens. If I press it for a long time it the screen goes of for about a second then the same screen appears. I tried taking the a battery out put it back in switched on and the same screen appears. When I connect the phone to my laptop my laptop does not recognise the phone.
Please help
Ally
Click to expand...
Click to collapse
Did you flash a rom from this forum? If so, your bricked.. This is the US version on Sprint (SPH-L710) Yours is the international version which can be found on this section here... http://forum.xda-developers.com/forumdisplay.php?f=1563.
We get a few I9300 people in here and seems to be more often then not. Anything in here that is flashed my render your phone nothing more then a paperweight. Check the forums before flashing anything. (incase you did) Thank you and have a nice day.
Moved to I9300
Now that you have already flashed the wrong firmware.. Try the following..
If you have CWM... Flash any intended for your device.. Wipe data factory reset.. Try booting
If that is not working then..
Download the stock firmware.. Flash it using Odin.. Boot into recovery and do a factory reset... Then see if your device boots..
sent from here, there, somewhere!!
Stock ROM location?
zoot1 said:
Now that you have already flashed the wrong firmware.. Try the following..
If you have CWM... Flash any intended for your device.. Wipe data factory reset.. Try booting
If that is not working then..
Download the stock firmware.. Flash it using Odin.. Boot into recovery and do a factory reset... Then see if your device boots..
sent from here, there, somewhere!!
Click to expand...
Click to collapse
Where can i find the stock rom for international GS-III? Honestly I have no idea where to find it. People say "download stock firmware" but they never put where it can be located. We need a firmware bible of some sort. Thanks if someone can help me out!
TheEnd94 said:
Where can i find the stock rom for international GS-III? Honestly I have no idea where to find it. People say "download stock firmware" but they never put where it can be located. We need a firmware bible of some sort. Thanks if someone can help me out!
Click to expand...
Click to collapse
Sam mobile .
http://www.sammobile.com/firmware/?page=3
I have a big problem with my Samsung Galaxy Tab 10.1
After completely flashing the Rom - Cyanogenmod 10 and reboot my tablet it says unfortunately set up has stop. Meaning my tablet cannot be used at all..... There are no home, applications etc.... to my dismay I went back to CWM BASED RECOVERY and I went back to RESTORE options because I remembered I made a backup but saddened to find out that there is nothing in it. so I went to WIPE DATA / FACTORY RESET and it just went back to the error message that 'unfortunately set up has stop. As I don't know what to do and to my dumbest idea I hit FORMAT SYSTEM and confirm it. now the biggest problem is my tablet just show. the SAMSUNG GALAXY TAB 10.1 and doesn't go anywhere at all. Please please please any Tech experts you valuable knowledge is really my New Year's wish on how to bring back to use my Tablet.
drahcir101 said:
I have a big problem with my Samsung Galaxy Tab 10.1
After completely flashing the Rom - Cyanogenmod 10 and reboot my tablet it says unfortunately set up has stop. Meaning my tablet cannot be used at all..... There are no home, applications etc.... to my dismay I went back to CWM BASED RECOVERY and I went back to RESTORE options because I remembered I made a backup but saddened to find out that there is nothing in it. so I went to WIPE DATA / FACTORY RESET and it just went back to the error message that 'unfortunately set up has stop. As I don't know what to do and to my dumbest idea I hit FORMAT SYSTEM and confirm it. now the biggest problem is my tablet just show. the SAMSUNG GALAXY TAB 10.1 and doesn't go anywhere at all. Please please please any Tech experts you valuable knowledge is really my New Year's wish on how to bring back to use my Tablet.
Click to expand...
Click to collapse
You need to grab a copy of the Stock ROM, boot into downloader mode, and install it using ODIN.
I have the same problem and my tablet is new and they tell me it cannot be fixed I need to get a new one - Really come on what is the pount of buying these items when they are so expensive e=and then they bomb out on you
hOW DO YOU GET a copy of the Stock ROM, boot into downloader mode, and install it using ODIN.
Please help me
i have a samsung galaxy s3 (gt-i9300) it was running a custom ROM when i got it but i wanted it back to the original samsung software, so i wiped the phone through recovery mode from the rom as the volume buttons are broke on my phone, after wiping it my phone will now only come up with the boot screen saying 'Samsung galaxy Slll GT-I9300' with a red exclamtion mark at the top left corner, is there anyway i can fix this my self as i need my phone working
You did more than just a factory reset, if you used format then you may have bricked it.
Try flashing the stock firmware for your country from sammobile.com, using Odin. Follow the guide in general forum sticky thread.
This happened to me too. Flashing the stock firmware solved it.
Better be careful with those format next time :laugh:
Well,
If your volume buttons are broken there is only one way to go to recovery to flash stock.
Buy an USB jtag from ebay.
Hi, all,
I used the ODIN Root for my T-Mobile Galaxy S6 Edge (model 925). I did everything, downloaded the proper zips and exe's and all, and began to root. Everything was going fine, my ODIN exe told me everything was fine, and my phone boots up...
...and stays stuck on the "Samsung Galaxy S6 Edge: Powered by Android" splash screen.
I CAN'T EVEN TURN IT OFF!
Any help would be greatly appreciated
HOW TO SOLVE:
Even though the phone is on, Volume Down + Home + Power will still boot into Download Mode. So do that.
Use the Samsung Galaxy S6 (NOT edge! Yes, the 920 file) zip instead of the Edge zip. And don't use the included .exe - use the official, latest ODIN EXE.
I have the same issue !
So i need to flash the 920's root file ? It won't really brick my phone ?? Or It will boot my phone ?
Thanks !
tusing said:
Hi, all,
I used the ODIN Root for my T-Mobile Galaxy S6 Edge (model 925). I did everything, downloaded the proper zips and exe's and all, and began to root. Everything was going fine, my ODIN exe told me everything was fine, and my phone boots up...
...and stays stuck on the "Samsung Galaxy S6 Edge: Powered by Android" splash screen.
I CAN'T EVEN TURN IT OFF!
Any help would be greatly appreciated
HOW TO SOLVE:
Even though the phone is on, Volume Down + Home + Power will still boot into Download Mode. So do that.
Use the Samsung Galaxy S6 (NOT edge! Yes, the 920 file) zip instead of the Edge zip. And don't use the included .exe - use the official, latest ODIN EXE.
Click to expand...
Click to collapse
Hi,
I'm still getting it hanging on the Galaxy S6 screen no matter what i do?!
Seriously need help!
perryd84 said:
Hi,
I'm still getting it hanging on the Galaxy S6 screen no matter what i do?!
Seriously need help!
Click to expand...
Click to collapse
Even though the phone is on, Volume Down + Home + Power will still boot into Download Mode, do not release any button until you see the download mode.
moises1204 said:
Even though the phone is on, Volume Down + Home + Power will still boot into Download Mode, do not release any button until you see the download mode.
Click to expand...
Click to collapse
this did not work for me, all that does is flash the bootscreen and i am still stuck on the bootscreen with the galaxy s6 powered by android there .
Galaxy S6 Demo Unit Bricked sm-g920x
hi i need help unbricking my demo unit galaxy s6
help
Galaxy s6 925x bricked Need help
hey i have galaxy s6 925x bricked need help unbricking it
unbricked
onetechdontknoweverything said:
hey i have galaxy s6 925x bricked need help unbricking it
Click to expand...
Click to collapse
hello
look here : forum.xda-developers.com/galaxy-s6-edge/help/help-required-bricked-s6-edge-t3095329/page5
i explain how i unbricked mine
lnuy said:
this did not work for me, all that does is flash the bootscreen and i am still stuck on the bootscreen with the galaxy s6 powered by android there .
Click to expand...
Click to collapse
try before with power button and volume down. Than press the sequence to go into download mode in the while the dislay turn off before rebooing.
liam04 said:
hello
look here : forum.xda-developers.com/galaxy-s6-edge/help/help-required-bricked-s6-edge-t3095329/page5
i explain how i unbricked mine
Click to expand...
Click to collapse
Hi mate
Have you done this with live demo unit?!?
Whenever I try this on Smart Switch I face force close from my PC!!!
First I enter model G925X then S/N but after that force close...
Hateftotti said:
Hi mate
Have you done this with live demo unit?!?
Whenever I try this on Smart Switch I face force close from my PC!!!
First I enter model G925X then S/N but after that force close...
Click to expand...
Click to collapse
it's a pb with your computer, for me no fc on my pc, did you try to uninstall samrt switch, erase all samsung folder, reboot, disable anti virus, re install the app on your pc ( downloaded from samsung here : http://www.samsung.com/ca/support/smartswitch/ )
i'm using windows 7 64bit
hope it will help you
Unbricked & root success.
http://forum.xda-developers.com/gal...it-model-sm-g920x-t3096172/page3#post61471520
Tried 920I!!!!!
Guyz can anyone please help me out...... I have a samsung galaxy s6 edge : SM-G925I.....
I did root with the odin 3.10.6, also used the 920I zip but i cannot get it right
Shows the "GALAXY S6 EDGE" and doesnt go any further
Please help!!!!!!!!!!!!!!!!!!!
---------- Post added at 07:51 AM ---------- Previous post was at 07:47 AM ----------
tusing said:
Hi, all,
I used the ODIN Root for my T-Mobile Galaxy S6 Edge (model 925). I did everything, downloaded the proper zips and exe's and all, and began to root. Everything was going fine, my ODIN exe told me everything was fine, and my phone boots up...
...and stays stuck on the "Samsung Galaxy S6 Edge: Powered by Android" splash screen.
I CAN'T EVEN TURN IT OFF!
Any help would be greatly appreciated
HOW TO SOLVE:
Even though the phone is on, Volume Down + Home + Power will still boot into Download Mode. So do that.
Use the Samsung Galaxy S6 (NOT edge! Yes, the 920 file) zip instead of the Edge zip. And don't use the included .exe - use the official, latest ODIN EXE.
Click to expand...
Click to collapse
still doesnt work on my edge 925I.................... what should i do
tusing said:
Hi, all,
I used the ODIN Root for my international Galaxy S6 Edge (modelsm-g 925i). I did everything, downloaded the proper zips and exe's and all, and began to root. Everything was going fine, my ODIN exe told me everything was fine, and my phone boots up...
...and stays stuck on the "Samsung Galaxy S6 Edge: Powered by Android" splash screen.
Click to expand...
Click to collapse
yaboib said:
tusing said:
Hi, all,
I used the ODIN Root for my international Galaxy S6 Edge (modelsm-g 925i). I did everything, downloaded the proper zips and exe's and all, and began to root. Everything was going fine, my ODIN exe told me everything was fine, and my phone boots up...
...and stays stuck on the "Samsung Galaxy S6 Edge: Powered by Android" splash screen.
Click to expand...
Click to collapse
Refer to this thread for a solution mate.
http://forum.xda-developers.com/gal...nual-update-stuck-g925f-t3173112#post62207108
Click to expand...
Click to collapse
How to solve
Use another root file,Use diffirent model for example:SM-G920F instead of SM-G920I or other model <-- these are international versions
Please help tmobile s6 edge soft brick
I initially used odin to flash OI1 update, after a rom I was using caused problems and I got bootloop. It changed bootloader value to b:3 and I'm unable to downgrade now so I used smart switch which didn't recognize device so used emergency recovery and still bootloop. I have factory reset and wipe cache multiple times along with adb side load and individual flashes of bootloader, modem, kernel, flashed custom kernel and twrp to access fix permissions and to mount partitions with advanced wipe etc and still wont boot past logo. Also during one fix attempt phone said can't mount system.. Idk I'm not understanding where the problem is .everything says successful but I'm still in bootloop. Please help. I've spent hours everyday for the past week searching & trying different things that seem might help so open to any suggestions.
Hello ,
if phone stuck on logo it means you played with EFS .
If phone Stuck on Logo After Flash Stock it Means Phone has Bad Root Key it know as DRK (DEV Root Key)
It Takes very long to find me perfect solution.
You will need to root phone. ( to turn on )
You will need an UART Interface and Uart Cable.
Than You need to Authenticate MSL
After that Write the Cert With DRK Data.
Now Phone is Good .
Flash with Stock Rom.
Enjoy Your Phone Working Fine.
tusing said:
HOW TO SOLVE:
Even though the phone is on, Volume Down + Home + Power will still boot into Download Mode. So do that.
Use the Samsung Galaxy S6 (NOT edge! Yes, the 920 file) zip instead of the Edge zip. And don't use the included .exe - use the official, latest ODIN EXE.
Click to expand...
Click to collapse
Hi, can someone please elaborate on this?
I have the exact same issue with the T-Mobile Galaxy S6 Edge SM-G925T
I've tried flashing G920FXXU2BOFJ with Odin but it just fails
I also flashed G925TUVS3DOJC perfectly with Odin but it's still stuck at the GS6 Splash Screen
Samsung Smart Switch does not work.
Can someone please send me the exact link to the file they used to fix this. Thank you
parter28 said:
Hi, can someone please elaborate on this?
I have the exact same issue with the T-Mobile Galaxy S6 Edge SM-G925T
I've tried flashing G920FXXU2BOFJ with Odin but it just fails
I also flashed G925TUVS3DOJC perfectly with Odin but it's still stuck at the GS6 Splash Screen
Samsung Smart Switch does not work.
Can someone please send me the exact link to the file they used to fix this. Thank you
Click to expand...
Click to collapse
boot into the recovery mode and wipe data/factory reset and cache and reboot system. it will boot properly.