[q] mk2 -> nc5 - Verizon Samsung Galaxy S 4

I'm having an issue taking the VZ OTA to NC5. I had previously rooted my phone and disabled knox.
I've factory reset and wiped the cache, to no avail. (A fresh install should wake knox back up, right?)
When I try to update from a local copy of the file, I get an error that E:Signature verification failed.
Any help would be appreciated. Since my last post, I've obtained a PC to upgrade my phone, so any OSX issues are no longer present.
Thanks!

bkscreamer said:
I'm having an issue taking the VZ OTA to NC5. I had previously rooted my phone and disabled knox.
I've factory reset and wiped the cache, to no avail. (A fresh install should wake knox back up, right?)
When I try to update from a local copy of the file, I get an error that E:Signature verification failed.
Any help would be appreciated. Since my last post, I've obtained a PC to upgrade my phone, so any OSX issues are no longer present.
Thanks!
Click to expand...
Click to collapse
Have you tried just using the No Wipe NC5 Odin file? You wouldn't lose any of your stuff and as far as I know you can just root it with Towel Root again and most likely freeze all your Knox stuff again.... I'm on MDK so I'm not 100%, on how you guys go about the Knox stuff these days. I know SuperSu and obviously TiBu...
Sent from my SCH-I545 using Tapatalk

bkscreamer said:
I'm having an issue taking the VZ OTA to NC5. I had previously rooted my phone and disabled knox.
I've factory reset and wiped the cache, to no avail. (A fresh install should wake knox back up, right?)
When I try to update from a local copy of the file, I get an error that E:Signature verification failed.
Any help would be appreciated. Since my last post, I've obtained a PC to upgrade my phone, so any OSX issues are no longer present.
Thanks!
Click to expand...
Click to collapse
OTA will not work unless your phone is 100% stock and that means 100%. No root, no programs frozen, no programs missing. The best way for you to proceed is odin the full-wipe NC5 image and towel root.
many threads around as well as youtube videos available

Using the no-wipe upgrade won't re-enable the Knox enforcement it was disabled prior to the upgrade.

Related

[Q] Help: S3 Dilemma

Hello,
I require some help as my phone has been acting really weird recently. I first bought a Samsung Galaxy S3 GT-I9300 earlier in September that was loaded with ICS. I am currently in Singapore and I got the phone from Starhub.
I attempted to root the phone in ICS, and succeeded in doing so. There were no problems at that point in time.
Recently, there was an update notification that kept prompting me to update to Jelly Bean. There were a few options if I wanted to postpone it: Update now, Remind in 30 minutes, 1 hour, and 3 hours. I found it really irritating, so I eventually just clicked to update it now.
The update went as planned, but when I restarted my phone, my SuperSU refuses to work. When I go into it, it tells me "The SU binary needs to be updated. Continue?" But when I click "Continue", it says Installation Failed! I have tried going to settings, disabling Superuser, and then attempting to use superuser to update the binary. It did not work. When I attempted to disable superuser under settings>SuperSU, it says "Uninstallation failed!"
I attempted to de-root using a guide from GalaxyS3Root website, which told me to download Odin Lite, Odin Kernel and Triangle Away.
However, Triangle Away refuses to work with an error message "Unfortunately, Triangle Away has stopped".
The Odin Lite also refuses to work by saying "Could not detect device model".
Am at a loss as to what to do now...
Tried using Titanium Backup as well, but it seems to be unable to back up my files without using Root.
Please help!!
You have several options. Easiest ones: just backup your stuff and either flash the lastest leak (ELK4) which is already rooted and has extra goodies or simply wipe your phone (get into recovery and factory reset it). Your rom (JB) wasn't rooted to begin with so you won't have root anymore. There's probably a way to do it without wiping but i usually don't bother. It's generally less of a hassle to backup and wipe.
Edit: oh sorry, missed the part where you couldn't backup without root. To be honest, i never use titanium, it always causes problems when i restore stuff. I just backup what i need by hand (sms's with a sms backup app, find my save's files, etc)
Thanks
kaynpayn said:
You have several options. Easiest ones: just backup your stuff and either flash the lastest leak (ELK4) which is already rooted and has extra goodies or simply wipe your phone (get into recovery and factory reset it). Your rom (JB) wasn't rooted to begin with so you won't have root anymore. There's probably a way to do it without wiping but i usually don't bother. It's generally less of a hassle to backup and wipe.
Click to expand...
Click to collapse
Thanks for the speedy reply!
To backup my stuff, I just have to plug my phone to my computer and drag &drop everything, yes?
Sorry I'm very new to the whole android thing, and I'm not very tech-savvy to begin with. When you say Flash the latest leak, how do I do this?
If I factory reset my phone now will I brick it?
That's such an overkill. Just boot into recovery mode and root your phone again with Odin. There are plenty of guides around.
michelleyabc said:
The update went as planned, but when I restarted my phone, my SuperSU refuses to work. When I go into it, it tells me "The SU binary needs to be updated. Continue?" But when I click "Continue", it says Installation Failed! I have tried going to settings, disabling Superuser, and then attempting to use superuser to update the binary. It did not work. When I attempted to disable superuser under settings>SuperSU, it says "Uninstallation failed!"
Click to expand...
Click to collapse
this is because after the update, your phone is no longer rooted.
michelleyabc said:
However, Triangle Away refuses to work with an error message "Unfortunately, Triangle Away has stopped".
Click to expand...
Click to collapse
Triangle Away is not required for rooted, it just resets a counter to 0. nothing very much to it.
michelleyabc said:
The Odin Lite also refuses to work
Click to expand...
Click to collapse
I think the best thing u can do right now is.
1. titanium backup to SD.
2. load a new rom via odin 3.04
3. install cf root to root the phone via odin 3.04
4. install titanium backup and restore your phone.
i know it can be very annoying because all the singaporean ah beng hp shops has no idea now to repair the phone.

[Q] Rooted & Getting Erro when trying to upgrade to Mi1

Really new to this. I did the verizon root methed for ME7. It says can't complete upgrade. Do I need to unroot in order to upgrade to MI1? If so, how do I do that?
bbroydri said:
Really new to this. I did the verizon root methed for ME7. It says can't complete upgrade. Do I need to unroot in order to upgrade to MI1? If so, how do I do that?
Click to expand...
Click to collapse
You don't need to unroot, but you do need to have the device in a stock condition. If you've debloated and removed stuff, or frozen apps, then the upgrade will likely fail.
I wouldn't be in any rush to install MI1.
Had same problem, now soft bricke my phone and need help
k1mu said:
You don't need to unroot, but you do need to have the device in a stock condition. If you've debloated and removed stuff, or frozen apps, then the upgrade will likely fail.
I wouldn't be in any rush to install MI1.
Click to expand...
Click to collapse
I was in the same position trying to accept the update from ME7. I had re-downloaded the stock apps and was in the process of converting them to system apps when my phone froze. When I tried to reboot I could not get passed the Verizon screen. I have been trying to read about how to fix this but I am unable to get odin to recognize my phone. I have downloaded the Samsung drivers and tried every version of odin but nothing happens when I put my phone into download (odin) mode and connect it with odin open. The rest of the steps seem easy if I could just get it to see my phone. Any thoughts, going on 3 days with no phone.

Help OTA keeps failing

Im on MI1 and it won't allow me to install the new OTA. Keeps failing. Ive reset my phone, odined to the original stock and still the OTA fails. Help please
@kiilajoe are you still rooted? I had to unroot before it would take. I also had to completely remove SS. Not sure if you have recovery installed or not. There are a few people saying that OTA service is unavailable at this time as well. Update has not shown up in Kies yet so that is not an option. Not sure if a emergency recovery would work for you or not but could give it a try also. When you went back to stock did all the native apps reinstall. I had to go through MyApps in play store and manually install everything prior to upgrade.
Sent from my SCH-I545 using Tapatalk
You can ODIN back to stock 4.2.2 with http://forum.xda-developers.com/showthread.php?t=2484726 its non destructive so it will not wipe your device. However you will lose root. Then you can take the OTA with out issue.

[Q] Failing to update, reset

Hi all, I originally rooted my phone using this post several months ag http://forum.xda-developers.com/showthread.php?t=2380325
I'm still fairly new to the dealings of root, and have found that I only used it to have access to a couple of cool apps that required root and at that rate I don't even use any more. That being said, I finally accepted the most recent update being okay that I would likely loose my root access. The update kept failing, I assumed because of the root. I backed up my personal data, and performed a factory reset from the phone. The phone still has superuser from the reset and still fails to update. Could someone help me return my phone to fully stock configuration? Thanks!
zomsoc said:
Hi all, I originally rooted my phone using this post several months ag http://forum.xda-developers.com/showthread.php?t=2380325
I'm still fairly new to the dealings of root, and have found that I only used it to have access to a couple of cool apps that required root and at that rate I don't even use any more. That being said, I finally accepted the most recent update being okay that I would likely loose my root access. The update kept failing, I assumed because of the root. I backed up my personal data, and performed a factory reset from the phone. The phone still has superuser from the reset and still fails to update. Could someone help me return my phone to fully stock configuration? Thanks!
Click to expand...
Click to collapse
Find out what odin is. Then..
Google "odin emergency tar (your build number here)" or something to that effect.
If you don't know your build number then you have some more research to do. Good luck.
I'd recommend using the Verizon update assistant. Much easier, but takes about half an hour to do:
1) Connect phone to PC using USB cord
2) When prompted for what action to take when this device is connected, select Verizon update assistant. Installation will take a few minutes.
3) Start the update assistant and confirm that you want to update the phone. The update will take a few minutes.
When the update is complete, you should have the most current update (MK2), and no root access. Should you need root again, try Saferoot - it's quick and easy:
http://forum.xda-developers.com/showthread.php?t=2565758
Thanks for pointing me in the right direction guys, I'll do some more research into both and report back soon.
Help! I've researched odin, downloaded and attempted to flash the stock image. Odin failed. My phone as of now is stuck in the downloading screen.
zomsoc said:
Help! I've researched odin, downloaded and attempted to flash the stock image. Odin failed. My phone as of now is stuck in the downloading screen.
Click to expand...
Click to collapse
You need to flash the same stock image as what was previously on your phone.
If you don't know what version you were on previously, flash MJ7 or MK2.

Can't get Lollipop any way..was rooted at one point.

Okay here's my tale of woe..
I rooted my phone last year - but at some point - took an update and lost root.
Though the phone still displays the "custom" boot screen with the padlock.
I tried to take the Lollipop update through the OTA but it fails and I get the "laying on his back" failed Android dude...
The phone DID take the first update.
I have: wiped cache in recovery, wiped data and cache in download manager.
No luck.
I have tried loading the NC5 kernel back on (via Odin 3.09) - but that makes the phone 100% unstable...reboots every 3 minutes..no access to apps - they lock and reboot etc etc.
Loaded the NG6 kernel back on to re-stabilize the phone and tried to Kies the update.
Kies downloads the update then when it tries to apply it the phone boots into "download mode"
I have been advised to:
I had the same custom boot screen--even after unrooting. Tried using Triangle Away to reset the binary count, but the count was already at 0. So ultimately I had to re-flash the NC5 kernel via Odin to get things truly back to being recognized as stock.
Then updates started rolling in for NG6, then NK1. Finally the two-part update for Lollipop.
Click to expand...
Click to collapse
and - of course that doesn't work. NC5 won't let the phone run long enough to take an update..
It has been said:
Try to flash the OC1 with the pit file
Click to expand...
Click to collapse
But I haven't found the stock OC1 file anywhere to even try and begin to get it loaded.
Honestly - I'm not even really concerned about rooting right now. I'd really just like to get the phone back to a stock configuration and kernel and lollipop.
Developer mode is enabled. Obviously both Kies and Odin talk to the phone with no problems.
Any ideas ?
Thanks, Dan
Get your phone to 4.4.2, use the verizon software upgrade assistant program preloaded on your phone to update. I had this exact same problem and that's how I got to 5.0.1
You WILL lose root. And there's no method to root 5.0 right now, and people have been saying that there might never be. You also won't be able to downgrade, or at least there's no method to do so at the moment, so you will be stuck with lollipop for a while, maybe forever.
Yes.
Maybe I need to clarify.
I do not care about root at this point. I just want to get the phone back to a stock state and take the Lollipop update.
I'm curious as to why I will never be able to update beyond Lollipop.
Doesn't matter I guess - the phone will have been replaced by then - but still...why ?
Thanks, Dan
CyrusKhane said:
Get your phone to 4.4.2, use the verizon software upgrade assistant program preloaded on your phone to update. I had this exact same problem and that's how I got to 5.0.1
You WILL lose root. And there's no method to root 5.0 right now, and people have been saying that there might never be. You also won't be able to downgrade, or at least there's no method to do so at the moment, so you will be stuck with lollipop for a while, maybe forever.
Click to expand...
Click to collapse
I've downloaded (3) different 4.4.2 Firmwares.
FNK1
FNC5 (No Wipe)
FNG6 (No Wipe)
Any opinion on which one is best ?
Did you download these manually or OTA? When I re-flashed the NC5 kernel, I received NG6 then NK1 then the 2-part Lollipop updates all OTA back-to-back.
Sent from my SCH-I545 using XDA Free mobile app
I would use the ng6. That's what I was running.
Rip Syntaxx said:
Did you download these manually or OTA? When I re-flashed the NC5 kernel, I received NG6 then NK1 then the 2-part Lollipop updates all OTA back-to-back.
Sent from my SCH-I545 using XDA Free mobile app
Click to expand...
Click to collapse
Manually - from these (XDA) forums.
danielzink said:
Manually - from these (XDA) forums.
Click to expand...
Click to collapse
Hmm... I'm not sure if it makes a difference to download OTA instead of manually. I would think it's worth a shot flashing NC5 (if it will let you downgrade) and using the software update feature to update OTA the rest of the way.
Sent from my SCH-I545 using XDA Free mobile app
Got it finally !
started out by flashing (FNG6 (No Wipe)) in Odin 3.09
That got me to regular boots with no "custom" screen showing the lock symbol.
Then I had to take OTA updates to FNK1 then the OTA preliminary Lollipop update then (OTA) finally Lollipop itself.
No root - but that's OK.
It took about an hour and a couple shutdowns to get things running smoothly but it's all good now.
Thanks everyone for their help.

Categories

Resources