Related
hi all,
i've used flahtool and use the flash mode. my phone is in .62 firmware EU
i've used this flashtool package from a modded ICS firmware >> http://forum.xda-developers.com/showthread.php?t=1518563
- Flashtool package: Flashtool package This includes baseband .70 and userdata etc from official ICS
after using this flashtool package my phone do a boot loop
my phone is root and i've installed CWM
how to unbrick my phone ?
ps : my english is bad i'm french.
It must be because of the kernel you are using. I had the same problem with that ROM, I tried several kernels and only bootloops.
Try flashing this kernel via fastboot mode:
http://forum.xda-developers.com/showthread.php?t=1566871
Then flash ROM KA18 or any other ROM, I am using ICS from team xperia and works great:
http://forum.xda-developers.com/showthread.php?t=1395192
You need to have an unlocked bootloader to boot custom ROMs. If your bootloader is not unlocked then you can look in the forum for an original ROM and flash it via flashtool.
http://forum.xda-developers.com/show....php?t=1258723.
tanks but my bootloader is locked for the moment i can unlock it...
i want to find a kernel for Android 2.3 for the firmware .62
i don' want to go in ICS for the moment
Try this:
http://forum.xda-developers.com/showthread.php?t=1258723
If you want to have your phone rooted, flash .42 then root and then use over the air update to go to .62
i get the MT15i_4.0.2.A.0.62_1246-9107.ftf
how to flash ?
Did you confirmed if your bootloader can be unlocked?
Type *#*#7378423#*#* to enter the service menu, then Service info > Configuration > Rooting Status, it should say "Bootloader unlock allowed Yes" if bootloader unlock is not allowed you cannot use fastboot method to unlock it.
sorry but i can't boot my phone
i'm remember is possible to unlock the bootloader
unlock bootloader allowed : yes
johnstinks said:
i get the MT15i_4.0.2.A.0.62_1246-9107.ftf
how to flash ?
Click to expand...
Click to collapse
To flash, just install FlashTool.
Then open flashTool and click on the flash icon, select flashmode. Then in the select folder section selet where you have the ftf file, click OK and follow the instructions on the screen.
sdato001 said:
To flash, just install FlashTool.
Then open flashTool and click on the flash icon, select flashmode. Then in the select folder section selet where you have the ftf file, click OK and follow the instructions on the screen.
Click to expand...
Click to collapse
no risk to brick the phone ? ( i mean no boot )
johnstinks said:
no risk to brick the phone ? ( i mean no boot )
Click to expand...
Click to collapse
man this is almost a chat, ask in Q/A and go to general chat and this is already posted !!
try to search and open your mind, and we dont know for sure of you brick your phone, give it a try and see
ok now my phone is unbricked
i've used sony erricon update service to restore the firmware
i've lost all data in my phone but is not important ...
tanks =)
i wanted to install the DooMKernel but in the process i screwed up and now my phone cannot on. what to do???
And what do you mean by screwed up?
Flash kernel again.
help!
Madfysh said:
And what do you mean by screwed up?
Flash kernel again.
Click to expand...
Click to collapse
cannot on the phone. black screen. does installing the official ics rom helps?
Try starting it in Flashmode and re-lock the bootloader (http://forum.xda-developers.com/showthread.php?t=1134335) so you can restore your phone with SUS or PC Companion
but i just realised i didn't set the debugging mode on
That's not incompatible with connecting the phone in flash mode (I think). Try and tell us the result (extract the battery, put it back, press Back button while you connect the phone to the computer and you have Flashtool opened)
Red Lap said:
Try starting it in Flashmode and re-lock the bootloader (http://forum.xda-developers.com/showthread.php?t=1134335) so you can restore your phone with SUS or PC Companion
Click to expand...
Click to collapse
That is only for officially unlocked BL's.
D4rkBlade99 said:
but i just realised i didn't set the debugging mode on
Click to expand...
Click to collapse
What does debug mode have to do with kernel?
Anw, just flash stock kernel, whether with fastboot.exe or with flashtool.
No need to flash entire firmware.
Now after that, say which kernel are you trying and how are you flashing it on your phone.
Madfysh said:
That is only for officially unlocked BL's.
What does debug mode have to do with kernel?
Anw, just flash stock kernel, whether with fastboot.exe or with flashtool.
No need to flash entire firmware.
Now after that, say which kernel are you trying and how are you flashing it on your phone.
Click to expand...
Click to collapse
sry, but do u have the link for stock kernels??
thanks
thanks people, i managed to unbrick my phone and install alliance kernel. wat's the best rom for alliance kernel??
Hello xda community
I've a big problem.
I've root my xperia and then install CWM recovery.
But now, the phone is block in boot. I have Sony logo and then it restart.
Is there anyone who can help me ?
Thank you to anyone who can help me
Flash a ROM
Sent from my LT26i using xda premium
You have to reflash your rom. if you want the stock , go for here : http://forum.xda-developers.com/showthread.php?t=1838457
Download the ftf file, and flash it with FlashTool , and its gone.
You probably have to root again your phone...
CaioA2 said:
You have to reflash your rom. if you want the stock , go for here : http://forum.xda-developers.com/showthread.php?t=1838457
Download the ftf file, and flash it with FlashTool , and its gone.
You probably have to root again your phone...
Click to expand...
Click to collapse
Thank you both, but I can't access fastboot mode as it reboot immediatly.
So my phone can(t be detected correctly
How did you manage to get your phone started again?
s4tch said:
How did you manage to get your phone started again?
Click to expand...
Click to collapse
Hello,
Well, First, to root I've used this http://www.techclap.com/9936/root-sony-xperia-p-lt22i-phone-tutorial/
Then after crashing my xperia with CWM, I've reflash my phone with the previous kernel.elf and it's ok.
Do this
Install flashtool and flash stock firmware.
wait till flashtool tells you to connect your phone in flash mode.
In flashtool download drivers manually and it will do the job.
Hello. I need help. Im on stock GB 4.0.2.a.0.62, stock kernel and rooted. I installed cwm using the playstore cwm(xpack?). It says the cwm is not permanent though.
I was trying to install the "HASA GB v6 beta all" using the cwm(i total wipe first), but forgot to flash the kernel first(rage kernel?), and now it wont boot.
I cant enter the cwm i guess because the cwm is not permanent.
I tried flashing official firmware back using flashtool but hang at "Reading device information"
I tried flashing the unbrickingxperia2011 ftf and flashing the firmware again but it still hang at the reading device.
Btw, my device can enter flashmode(green led) n fastboot(blue led).
Help please! Thanks a lot
Sent from somewhere
Is your bootloader unlocked? If yes, just flash the kernel in fastboot mode and then you should be able to boot in cwm
You don't need to install cwm using xparts, all kernels have cwm included, so just flash a kernel you like and you have cwm :good:
mihahn said:
Is your bootloader unlocked? If yes, just flash the kernel in fastboot mode and then you should be able to boot in cwm
You don't need to install cwm using xparts, all kernels have cwm included, so just flash a kernel you like and you have cwm :good:
Click to expand...
Click to collapse
My bootloader is locked
I have my nandroid backup though. Can i flash my nandroid using the flashtool somehow?
Sent from my Nexus 4
kruzae said:
My bootloader is locked
I have my nandroid backup though. Can i flash my nandroid using the flashtool somehow?
Sent from my Nexus 4
Click to expand...
Click to collapse
No, you need to do try it again like that:
1. Go to flashtool installation folder -> drivers: install all drivers for all devices/modes
2. Launch flashtool
3. Click the flash -> flashmode
4. Select the .ftf, don't exclude anything, but tick "no final verification"
5. When the poup appears, take your phone, and take out the battery
6. After 10 seconds, reinsert the battery and hold volume down. While holding volume down connect the phone to your pc
7. Now the flashing should start and we can hope it'll work!
8. Boot up the phone, root it, install cwm, restore the backup!
On a locked bootloader, you can't flash a kernel. You need to choose a rom for locked bootloader and follow all instructions like given there :good:
mihahn said:
No, you need to do try it again like that:
1. Go to flashtool installation folder -> drivers: install all drivers for all devices/modes
2. Launch flashtool
3. Click the flash -> flashmode
4. Select the .ftf, don't exclude anything, but tick "no final verification"
5. When the poup appears, take your phone, and take out the battery
6. After 10 seconds, reinsert the battery and hold volume down. While holding volume down connect the phone to your pc
7. Now the flashing should start and we can hope it'll work!
8. Boot up the phone, root it, install cwm, restore the backup!
On a locked bootloader, you can't flash a kernel. You need to choose a rom for locked bootloader and follow all instructions like given there :good:
Click to expand...
Click to collapse
Lol it worked! Thanks a lot ! This is actually my friend's phone im flashing. I come from s3 and nexus 4, and usually their roms already come with their kernel. Never thought i have to flash it separately. Thanks again!
Sent from my Nexus 4
kruzae said:
Hello. I need help. Im on stock GB 4.0.2.a.0.62, stock kernel and rooted. I installed cwm using the playstore cwm(xpack?). It says the cwm is not permanent though.
I was trying to install the "HASA GB v6 beta all" using the cwm(i total wipe first), but forgot to flash the kernel first(rage kernel?), and now it wont boot.
I cant enter the cwm i guess because the cwm is not permanent.
I tried flashing official firmware back using flashtool but hang at "Reading device information"
I tried flashing the unbrickingxperia2011 ftf and flashing the firmware again but it still hang at the reading device.
Btw, my device can enter flashmode(green led) n fastboot(blue led).
Help please! Thanks a lot
Sent from somewhere
Click to expand...
Click to collapse
try flashing the official ftf by flastool it should work. hit thanks if i helped
Not Able to Flash Stock FTF
Hello,
My LWW got bricked while flashing a custom kernel nAs's 3.4. I was in 4.1 JB custom rom. After flashing the kernel my phone wont start. When I pressed the power button it just vibrate and nothing happened after that. I tried to flash the stock ICS and also GB firmware from sony's website however when I tried to flash those firmwares via flashtool. I am getting error that "flashtool cannot read after opening the phone" and flashing is aborted.
I have unlocked bootloader.
Please help.......:crying:
j_a_y_82 said:
Hello,
My LWW got bricked while flashing a custom kernel nAs's 3.4. I was in 4.1 JB custom rom. After flashing the kernel my phone wont start. When I pressed the power button it just vibrate and nothing happened after that. I tried to flash the stock ICS and also GB firmware from sony's website however when I tried to flash those firmwares via flashtool. I am getting error that "flashtool cannot read after opening the phone" and flashing is aborted.
I have unlocked bootloader.
Please help.......:crying:
Click to expand...
Click to collapse
Repair with Sony Companion does not work?
I'll Try
kirev said:
Repair with Sony Companion does not work?
Click to expand...
Click to collapse
I'll try to do that and post the result here....
Thanx
Relock boot loader if needed
j_a_y_82 said:
Hello,
My LWW got bricked while flashing a custom kernel nAs's 3.4. I was in 4.1 JB custom rom. After flashing the kernel my phone wont start. When I pressed the power button it just vibrate and nothing happened after that. I tried to flash the stock ICS and also GB firmware from sony's website however when I tried to flash those firmwares via flashtool. I am getting error that "flashtool cannot read after opening the phone" and flashing is aborted.
I have unlocked bootloader.
Please help.......:crying:
Click to expand...
Click to collapse
First of all you don't need to try PC Companion as it won't work on an unlocked bootloader!
Have you tried flashing another kernel in fastboot mode?
kirev said:
Relock boot loader if needed
Click to expand...
Click to collapse
No, better don't advise to lock the phone again when it's bricked. That isn't a good idea!
Sent from my Nexus 4 running Android 4.4
It Worked
mihahn said:
First of all you don't need to try PC Companion as it won't work on an unlocked bootloader!
Have you tried flashing another kernel in fastboot mode?
No, better don't advise to lock the phone again when it's bricked. That isn't a good idea!
Sent from my Nexus 4 running Android 4.4
Click to expand...
Click to collapse
The Sony PC Companion trick worked. My phone is working fine now. Only thing is it is now in GB 2.3.4 and bootloader is also locked. I have to start again from scratch and root my device to update it to JB
Thanks everyone for solutions.....:victory::laugh::laugh:
j_a_y_82 said:
The Sony PC Companion trick worked. My phone is working fine now. Only thing is it is now in GB 2.3.4 and bootloader is also locked. I have to start again from scratch and root my device to update it to JB
Thanks everyone for solutions.....:victory::laugh::laugh:
Click to expand...
Click to collapse
That's strange as PC Companion doesn't work on an unlocked bootloader normally. Did you lock it again or did it just work like that?
Sent from my Nexus 4 running Android 4.4
Just Worked
mihahn said:
That's strange as PC Companion doesn't work on an unlocked bootloader normally. Did you lock it again or did it just work like that?
Sent from my Nexus 4 running Android 4.4
Click to expand...
Click to collapse
No I did not do any thing, it just worked like that.
j_a_y_82 said:
No I did not do any thing, it just worked like that.
Click to expand...
Click to collapse
Same with me once on testpoint unlocked bootloader.
kirev said:
Same with me once on testpoint unlocked bootloader.
Click to expand...
Click to collapse
j_a_y_82 said:
No I did not do any thing, it just worked like that.
Click to expand...
Click to collapse
Maybe that's possible because you used the testpoint method! Really interesting
Sent from my Nexus 4 running Android 4.4
hello guys.. i need your help..i did a terrible and stupid thing..i flashed the ROM before the kernel so my phone won't work..whenever I turn on my phone it only displays blue screen and nothing else..then my led lights in different colors..my computer don't recognize my phone..i cannot reflash since i can't see anything on the screen..i cannot use flashtool since my phone don't show on my computer..everytime i plug the usb cord i can hear my computer with "error thing" sound..please help...thanks.
wnztn said:
hello guys.. i need your help..i did a terrible and stupid thing..i flashed the ROM before the kernel so my phone won't work..whenever I turn on my phone it only displays blue screen and nothing else..then my led lights in different colors..my computer don't recognize my phone..i cannot reflash since i can't see anything on the screen..i cannot use flashtool since my phone don't show on my computer..everytime i plug the usb cord i can hear my computer with "error thing" sound..please help...thanks.
Click to expand...
Click to collapse
And "the ROM" would be?
ChikeD said:
And "the ROM" would be?
Click to expand...
Click to collapse
Unoficial Cyanogenmod CM 11 (Android 4.4.2 KitKat) by mujeni.. I installed the peppermint which is supposedly for sola then I interchanged the steps of flashing..
wnztn said:
Unoficial Cyanogenmod CM 11 (Android 4.4.2 KitKat) by mujeni.. I installed the peppermint which is supposedly for sola then I interchanged the steps of flashing..
Click to expand...
Click to collapse
So you installed the one for sola?
ChikeD said:
So you installed the one for sola?
Click to expand...
Click to collapse
Yes..I installed the peppermint ROM..Moreover, I installed first the ROM then flashed the boot.img...
wnztn said:
Yes..I installed the peppermint ROM..Moreover, I installed first the ROM then flashed the boot.img...
Click to expand...
Click to collapse
Don't really matters, the img is flashed with ROM anyway, problem you installed ROM for different phone.
Turn the phone off and flash stock with flashtool, then start over, with ROM for your phone this time.
ChikeD said:
Don't really matters, the img is flashed with ROM anyway, problem you installed ROM for different phone.
Turn the phone off and flash stock with flashtool, then start over, with ROM for your phone this time.
Click to expand...
Click to collapse
How can I use my flashtool if it says No Device?
wnztn said:
How can I use my flashtool if it says No Device?
Click to expand...
Click to collapse
Flash mode, have you flashed with flashtool before?
ChikeD said:
Flash mode, have you flashed with flashtool before?
Click to expand...
Click to collapse
I'm not quite sure..coz my first flashing was through CWM..I only used flashtool when I unlocked the boatloader...
wnztn said:
I'm not quite sure..coz my first flashing was through CWM..I only used flashtool when I unlocked the boatloader...
Click to expand...
Click to collapse
Okay, flash mode and fastboot mode drivers installed I assume.
Download stco rom FTF, put it in flashtool firmware directory, start flash in flash mode, choose the file you have dowanloaded, wait till flashtool ask you to connect in flash mode, turn the phone off (press power + volume up untill you feel (1+) 3 vibrations,) connect the USB cable while holding volume down key.
ChikeD said:
Okay, flash mode and fastboot mode drivers installed I assume.
Download stco rom FTF, put it in flashtool firmware directory, start flash in flash mode, choose the file you have dowanloaded, wait till flashtool ask you to connect in flash mode, turn the phone off (press power + volume up untill you feel (1+) 3 vibrations,) connect the USB cable while holding volume down key.
Click to expand...
Click to collapse
Sorry if I'm so noob about this one but I want to clarify things..Do you mean stock rom ftf?
My flashtool is Sony Mobile flasher by Androxyde..I found the firmware folder in the folder of the flasher where I can see an FTF file in it..Is this where I should paste the ftf? and lastly, I'm confused with flash mode..what is it?sorry..
wnztn said:
Sorry if I'm so noob about this one but I want to clarify things..Do you mean stock rom ftf?
My flashtool is Sony Mobile flasher by Androxyde..I found the firmware folder in the folder of the flasher where I can see an FTF file in it..Is this where I should paste the ftf? and lastly, I'm confused with flash mode..what is it?sorry..
Click to expand...
Click to collapse
Yest that flashtool.
There only stock rom FTFs no others, you will have to search your phone android development forum for one.
Open flash tool, turn off your phone, connect to the PC while pressing volume down key, flashtool should display "device connected in flash mode", and it should stay connected for about 45 seconds if no flash is being made.
ChikeD said:
Yest that flashtool.
There only stock rom FTFs no others, you will have to search your phone android development forum for one.
Open flash tool, turn off your phone, connect to the PC while pressing volume down key, flashtool should display "device connected in flash mode", and it should stay connected for about 45 seconds if no flash is being made.
Click to expand...
Click to collapse
How can I flash the ftf file if the flash tool can't read my device?It says No device on the tab...
wnztn said:
How can I flash the ftf file if the flash tool can't read my device?It says No device on the tab...
Click to expand...
Click to collapse
Did you try what I last wrote in that post?
ChikeD said:
Did you try what I last wrote in that post?
Click to expand...
Click to collapse
Currently downloading..hehe..I hope this one will work.. In the meantime, thanks for the concerns and helps.. hehe..I appreciate it really..
wnztn said:
Currently downloading..hehe..I hope this one will work.. In the meantime, thanks for the concerns and helps.. hehe..I appreciate it really..
Click to expand...
Click to collapse
Just try if you can get flash mode to work without flashing anything as I explained. This is the key for recovery.
You can also create your own FTF.
Start update with PC Companion until it asks you tp connect in flash mode, then quit and build the FTF with flashtool.
http://forum.xda-developers.com/showthread.php?t=2188129
http://mytechencounters.wordpress.c...eate-an-ftf-file-of-your-xperia-ics-firmware/
ChikeD said:
Just try if you can get flash mode to work without flashing anything as I explained. This is the key for recovery.
You can also create your own FTF.
Start update with PC Companion until it asks you tp connect in flash mode, then quit and build the FTF with flashtool.
http://forum.xda-developers.com/showthread.php?t=2188129
http://mytechencounters.wordpress.c...eate-an-ftf-file-of-your-xperia-ics-firmware/
Click to expand...
Click to collapse
I tried flashing and somehow I think Im on my way to fully recover my phone but now my flasher says C:\flashtool\.\frimwares\cached.sin (The system cannot find the file specified)
wnztn said:
I tried flashing and somehow I think Im on my way to fully recover my phone but now my flasher says C:\flashtool\.\frimwares\cached.sin (The system cannot find the file specified)
Click to expand...
Click to collapse
That I never had.
This happen while flashing FTF?
wnztn said:
I tried flashing and somehow I think Im on my way to fully recover my phone but now my flasher says C:\flashtool\.\frimwares\cached.sin (The system cannot find the file specified)
Click to expand...
Click to collapse
Never mind my last post.. I unchecked the flash cache before flashing and yes! my phone my beloved phone is alive..haha..thank u soooooo much..may we see each other here and looking forward for the betterment of my android with your help.. Thank you..