I'm looking to collect the following:
ZARA_UL KitKat OTAs - NEEDED MOST
ZARA_UL OTAs following the KitKat update
Any ZARA_CL variant other than Virgin Mobile US (if that even exists) They do exist!!
In the hopes of gaining hboot files to add to the collection of "no red text" modified hboots, which can be found here. If you have a ZARA_UL and haven't updated to KitKat yet, please copy your OTA zip before you run the update. These are most important because they actually have the new hboot in them. Any future OTAs might still include it, but I don't think they'll be guaranteed to.
Saving the OTA zip.
After your phone downloads the OTA you will get a popup asking to install now or later, select later.
The file will be located in a folder on your EXTERNAL SDCARD
Plug the phone into your PC and open the external storage of the phone
Find the file and copy it to your PC
Unplug your phone and tap the update notification to resume the update.
It's that simple to save it.
Sharing the OTA zip
Open the OTA zip that you copied to your PC
Extract the file "firmware.zip"
Upload the file firmware.zip to a storage provider such as Google Drive or DropBox
Alternately, you can simply upload the whole OTA zip if you like (It will take ~15 minutes to upload the KK OTA at 5Mbps)
Send me the link via PM or in a reply to this thread.
Collected so far
The following link to full OTAs if available, firmwares will be made into their own post.
KitKat OTA for Virgin Mobile US [SPRINT] (CID SPCS_002)
KitKat OTA for hTC Asia thanks to @Akishima (CID HTC__044)
KitKat OTA for Koodo CA [TELUS] thanks to @mrplowdan (CID TELUS001)
KitKat OTA for Wind Mobile CA [GLOBALIVE] thanks to @bunyan69 (CID GLOBA001)
KitKat OTA for HTC Europe thanks to @iCreck (CIDs HTC__001, HTC__E11, HTC__203, HTC__304, HTC__Y13, HTC__A07, HTC__032, HTC__A48, HTC__M27, HTC__405)
KitKat OTA for nTelos [UTStarcom] thanks to @nullity (CID UTSI_005)
KitKat OTA for Vodafone Hutchison Australia (VHA) thanks to @blue74lion (CID VODAP021)
PM'd you the info for Wind mobile ZARA_UL KitKat OTAs
Are these files going to be hosted anywhere?
Makertronic said:
Are these files going to be hosted anywhere?
Click to expand...
Click to collapse
I can add links to the ones shared so far.
PM'd you Zara_UL Europe KitKat OTA
PS: Sorry, i'm sent you full ota.zip. I can share firmware.zip in a few hours
iCreck said:
PM'd you Zara_UL Europe KitKat OTA
PS: Sorry, i'm sent you full ota.zip. I can share firmware.zip in a few hours
Click to expand...
Click to collapse
Thanks.
Full ones are fine. It doesn't have to be just the firmware.zip, it just makes it easier for people since they'll only have to upload a ~35MB file vs a 600+MB file.
Is there a way to flash an KK OTA zip yet? Only curious in case I mess something up and there is no KK RUU yet. Thanks
Sent from my Virgin Mobile CDMA HTC Desire 601 zara_cl
Just PM'd you a link for the full OTA for Wind Mobile CA [GLOBALIVE]
i need this OTA please help!
0P4EIMG_ZARA_UL_K44_SENSE55_MR_Yoigo_ES_2.14.1510.6_Radio_1.26.40e.00.14_10.z18.40.1304L_release_359042_signed_2_4.zip
Related
Hi Guys,
You are now my final hope!!!
I am trying for 3 days now to upgrade the radio version of my Desire V to 1.10 (Currently I'm running on1.06)
I have installed several ROM's an tried to run OTA updates, but none of them actually updated my radio to 1.10
Can someone provide me the zip file or a clear instructiuon on how to update my radio to 1.10?
I'm now running on the HTC_T328W_Asia-WWE_1.73.707.1_Stock ROM (found here : http://forum.xda-developers.com/showthread.php?t=2343623 )
Radio is on 1.06.34D.05_20.22.30.23U
I'm looking for radio version 1.10.34D.17_20.26.30.27U
My girlfriends Desire V is actually running on this radio and exact the same kernel (1.73.707.1)
Using "getprop ro.cid" I get back HTCCN703 (China Version)
bobbes1974 said:
Hi Guys,
You are now my final hope!!!
I am trying for 3 days now to upgrade the radio version of my Desire V to 1.10 (Currently I'm running on1.06)
I have installed several ROM's an tried to run OTA updates, but none of them actually updated my radio to 1.10
Can someone provide me the zip file or a clear instructiuon on how to update my radio to 1.10?
I'm now running on the HTC_T328W_Asia-WWE_1.73.707.1_Stock ROM (found here : http://forum.xda-developers.com/showthread.php?t=2343623 )
Radio is on 1.06.34D.05_20.22.30.23U
I'm looking for radio version 1.10.34D.17_20.26.30.27U
My girlfriends Desire V is actually running on this radio and exact the same kernel (1.73.707.1)
Using "getprop ro.cid" I get back HTCCN703 (China Version)
Click to expand...
Click to collapse
the problem is that your phone was born in china and you will flash a TW Radio image.. and before you're not have a TW CID or SUPER CID you are NOT PERMITTED to do an update of your Radio
maybe an update to latest chinese Radio is possible
if i could get a chinese rom... I should solve your issue..
Sent from my HTC Desire V using xda premium
tomcatz666 said:
the problem is that your phone was born in china and you will flash a TW Radio image.. and before you're not have a TW CID or SUPER CID you are NOT PERMITTED to do an update of your Radio
maybe an update to latest chinese Radio is possible
if i could get a chinese rom... I should solve your issue..
Sent from my HTC Desire V using xda premium
Click to expand...
Click to collapse
Maybe you can use ROM found here : http://forum.xda-developers.com/showthread.php?t=2343623
bobbes1974 said:
Maybe you can use ROM found here : http://forum.xda-developers.com/showthread.php?t=2343623
Click to expand...
Click to collapse
I need the full RUU (or the ROM.Zip outta there).. boot,img and recovery.img are not enough. sorry
but I found a source for the last Chinese RUU
http://pan.baidu.com/share/link?shareid=53606&uk=2301607189
after I extracted this, I can prepare a file, maybe it works for this issue
bobbes1974 said:
Hi Guys,
You are now my final hope!!!
.....
Using "getprop ro.cid" I get back HTCCN703 (China Version)
Click to expand...
Click to collapse
Ok, I have the same version. I was in same condition as you and it was needed of two OTA to get radio 1.10. It will be and a third update but that is for some chinese apps (11 of them) - don't bother.
Good luck!
Here is a thread with all official versions, RUU and ROM for this version of Desire V. It's chinese but numbers are readable.
carliv said:
Ok, I have the same version. Here is a ROM clean stock from tha last RUU 1.71.1402.4 with radio version 1.08. Here are stock signed boot and recovery. Download these, follow the steps from that page you mentioned before, and you will return to stock, then you can do OTA updates. I was in same condition as you and it was needed of two OTA to get radio 1.10. It will be and a third update but that is for some chinese apps (11 of them) - don't bother.
Good luck!
PS. Here is a thread with all official versions, RUU and ROM for this version of Desire V. It's chinese but numbers are readable.
Click to expand...
Click to collapse
Pfffffffff
This took some time and effort.
First I had to reload the Original China ROM
OTA updates were loaded, however, they did not install
Several other ROM's were loaded, but no succes at all
Then I locked the bootloader again en downloaded the correct RUU
Installed the RUU using the PC over the Original China ROM I installed myself
After this, the Phone installed several OTA updates
Finally my radio was updated to version 1.10
Then unlocked the bootloader again
installed the European ROM and all is runnig fine now
Thank you for the information!!!
bobbes1974 said:
Pfffffffff
This took some time and effort.
First I had to reload the Original China ROM
OTA updates were loaded, however, they did not install
Several other ROM's were loaded, but no succes at all
Then I locked the bootloader again en downloaded the correct RUU
Installed the RUU using the PC over the Original China ROM I installed myself
After this, the Phone installed several OTA updates
Finally my radio was updated to version 1.10
Then unlocked the bootloader again
installed the European ROM and all is runnig fine now
Thank you for the information!!!
Click to expand...
Click to collapse
If after installation of the original China ROM, you did flash stock recovery and boot, and lock the bootloader, than I can assure you the OTA will install. But if you have custom recovery and bootloader unlocked, OTA will be downloaded but not installed.
I know you solved this, but for the other readers who wants to do that I have to say it.
Gents,
I desperately need a help to get an untouched build.prop for my International One max running 4.4.2, preferably under region HTC_044, Asia WWE.
I've installed a Custom ROM which seemed to make changes to my build.prop and I had not thought about backing it up prior to installing the Custom ROM. Sorry for my noobness in this regard.
Hence, would appreciate it if someone from region HTC_044 or other International t6ul owner could upload his original build.prop running 4.4.2, CID: HTC_044, Asia WWE, MID: OP3PIMG preferably so I could take my region's Sense 6.0 OTA successfully.
Otherwise, is there a way to extract or pull build.prop from the previous OTA.zip?
Or, what are required to be deleted or changed from my current build.prop so I could make it original again?
Thanks.
Anybody?
Also, will re-flash the HBOOT (which comes with previous OTA 4.4.2 update) repair the inconsistent BUILD.PROP?
After resetting my max and restore TWRP backup (after previous installation of Dev. version of t6ul Sense 6), I found that the BUILD.PROP contained two CIDs inside, HTC__044 and HTC_039, where usually only HTC__044 before I installed the said custom rom.
I am not sure which part of current BUILD.PROP having this msg: "BUILD.PROP has unexpected contents" resulting in failure of updating to my region's Sense 6.
Anyway here I uploaded the said BUILD.PROP.
thematrix777 said:
Gents,
I desperately need a help to get an untouched build.prop for my International One max running 4.4.2, preferably under region HTC_044, Asia WWE.
I've installed a Custom ROM which seemed to make changes to my build.prop and I had not thought about backing it up prior to installing the Custom ROM. Sorry for my noobness in this regard.
Hence, would appreciate it if someone from region HTC_044 or other International t6ul owner could upload his original build.prop running 4.4.2, CID: HTC_044, Asia WWE, MID: OP3PIMG preferably so I could take my region's Sense 6.0 OTA successfully.
Otherwise, is there a way to extract or pull build.prop from the previous OTA.zip?
Or, what are required to be deleted or changed from my current build.prop so I could make it original again?
Thanks.
Click to expand...
Click to collapse
You can download stock t6ul build.prop file from this link
https://www.dropbox.com/s/6ou6wpehdozrsct/build.prop
Sent from my HTC One max using XDA Premium 4 mobile app
farazhassankhan said:
You can download stock t6ul build.prop file from this link
https://www.dropbox.com/s/6ou6wpehdozrsct/build.prop
Sent from my HTC One max using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hi farazhassankhan,
Thanks. When I restore my TWRP backup and paste this build.prop over the current one (and set the permission accordingly), will it adjust to my CID and related language automatically or should I manually add HTC__044 and change language code in there? Sorry as this might be a stupid question.
Modifying build.prop without sufficient knowledge is very prone to bricking device... which I am fully aware of. Hence, seeking advice from more experience user in this regard.
Why its so hard to find OTA file for 4.3 Update for At&t on internet, only RRU is present? I read its a 567mb file.
I have searched everywhere for OTA dump, but its not there even on htc1guru.com, other regional variants 4.3 OTA files are present.
Also surprisingly the next OTA (4.4 Sense 5.5 and sense6 ) are there for At&t but not (3.17.502.3) .
I don't wanna do a RUU flash as i will loose all my data and currently i am on Stock 4.1 with S-on.
Please let me know if anybody can find a OTA file for the above so that i can update via recovery mode in device only.
Thanks.
anirudhgargi said:
Why its so hard to find OTA file for 4.3 Update for At&t on internet, only RRU is present? I read its a 567mb file.
I have searched everywhere for OTA dump, but its not there even on htc1guru.com, other regional variants 4.3 OTA files are present.
Also surprisingly the next OTA (4.4 Sense 5.5 and sense6 ) are there for At&t but not (3.17.502.3) .
I don't wanna do a RUU flash as i will loose all my data and currently i am on Stock 4.1 with S-on.
Please let me know if anybody can find a OTA file for the above so that i can update via recovery mode in device only.
Thanks.
Click to expand...
Click to collapse
Their was actually a 3.10.502.2 Leak / RUU before the 3.17.502.3
I have nearly every RUU / Reset / OTA for the AT&T One but none for those 2 OTA releases. Sorry
no ota but there is an decrypted ruu
So this is probably a stupid question, and I apologize in advance, but I was wondering if it's normal that my firmware is still 1.12.502.18 and Android Version is 4.4.2? When I click software update it says that my current software is up to date. Thanks
erklings said:
So this is probably a stupid question, and I apologize in advance, but I was wondering if it's normal that my firmware is still 1.12.502.18 and Android Version is 4.4.2? When I click software update it says that my current software is up to date. Thanks
Click to expand...
Click to collapse
Not a stupid question by any means.
That is a really old software number. Are you connected to AT&T, or another network?
You can RUU up to 1.58, see the instructions on the following webpage under "manual system update instructions": http://www.htc.com/us/support/htc-one-m8-att/news/
You can also RUU up to 2.23 (Android 4.4.3). Although this OTA was pulled due to battery drain issues, the RUU does not suffer the same issue. While the RUU is no longer listed on the HTC support website (linked above), the official download link is still active:
http://forum.xda-developers.com/att-htc-one-m8/general/htc-one-m8-ruu-m8ul-4-4-3-t2860423
If connected to the AT&T network, either being updated to 1.58 or 2.23 should allow you to receive the 3.x (Android 4.4.4) software once it rolls out (rumored mid-December). But being on 1.12, you will likely not receive the update.
Hello
My build number is 4.14.709.10
I want ruu for this build number.
I find this link but a can't download it.
http://www.ai-development.org/forum.php?mod=viewthread&tid=19000
Please help me
Thanks
Hello
I find and download this rom :
https://www.androidfilehost.com/?fid=24349802275799281
but,It is not ruu .
this is a zip rom.
how i can flash this rom?
I am unlocked and s-on.
Thanks
pourya78 said:
Hello
My build number is 4.14.709.10
I want ruu for this build number.
I find this link but a can't download it.
http://www.ai-development.org/forum.php?mod=viewthread&tid=19000
Please help me
Thanks
Click to expand...
Click to collapse
get ruu from here http://www.htc.com/us/support/htc-one-max/news/
Hello I stock on my google drive account RUU_T6_UL_K44_SENSE60_MR_HTC_Europe_3.23.401.1_Radio_4T.27.3218.14_10.33C.1718.01_release_386195_signed.exe
It is for the telephone with the bootloader locked for return in factory config kitkat with an OTA update possibility after installation
It is a file without virus, it is an original of HTC I used several times. I do not share links from unknown or uncertain source
This is for the gsm version