Accidentally flashed wrong ROM - AT&T Samsung Galaxy Note I717

I just realized that I flashed a I747 Galaxy S3 ROM to an I717 (argh) Galaxy Note. I now can't seem to get into download mode or recovery by holding the VolUp and VolDown while starting the phone with the power button.
How can I get it back into Download mode so that I can flash the right ROM?
(I also inadventently wiped EFS, but that's for a different thread)

rfkrocktk said:
I just realized that I flashed a I747 Galaxy S3 ROM to an I717 (argh) Galaxy Note. I now can't seem to get into download mode or recovery by holding the VolUp and VolDown while starting the phone with the power button.
How can I get it back into Download mode so that I can flash the right ROM?
(I also inadventently wiped EFS, but that's for a different thread)
Click to expand...
Click to collapse
So did you edit the ROM to remove the asserts or something? How could you possibly flash the wrong ROM?
It's possible you've bricked it, as different ROMs have different partition tables and possible that you over-wrote the bootloader with random other stuff.
Hold Volume Down and Power, when your see the phone turn on, let go of Power. If you don't see any screens there, try again. If it still doesn't..... You can try one of the dongle things you can get online.
If you see absolutely nothing, ever, powered, plugged in USB, etc... I suspect you bricked it.

downloded clockworkmod rom manger, then TWRP Manager, rebooted into recovery mode and install PhilZ CWM Recovery which was for GT-N7000 immediate after installing PhilZ CWM Recovery screen gone blank, VolUpDn power center all buttons are disabled, not able able to boot into recovery/usb download mode phone is dead. :crying:
Please suggest how can i get back my Samsung Galaxy Note SGH-I717 to the Life :crying:

You're bricked. You can send it away for repair.
You can order a usb jig to force download mode so you can reflash firmware.
Or you can use it as a paperweight!
Check this site out for your options.
http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-note/

tried UBS jig, still not phone is unresponsive
want to know if i change the mother board from GT-N7000 to SGH-i717 will it work?

Related

Bricked S2?

recently soft bricked my new AT&T S2.I have clockwork recovery installed (4.0.0.2), and the only buttons that work are home (goes back to the first menu), volume up/down, and power to hide the menus. I can't select anything at all, it seems like I have the international version of the recovery, not one for the S2.Anyways, I can't get into download mode by holding down the home + Vol up+ power, and Odin can't seem to connect to my phone if it's in clockwork recovery and not download mode.Would the jig work? Or is having no ability to boot into download mode pretty much a killer? I can access my phone through ADB, I just don't know my way around adb as well as I would like.Is there any way to flash a different recovery via ADB? Any other solutions to get my phone up and running again? Because right now it's not booting at all.
EDIT: Managed to get back into the system. It's running the International ROM instead of mine though, so the buttons are wonky. Does anyone know where I can find the ODIN files to flash back to stock AT&T S2?
CadellG said:
recently soft bricked my new AT&T S2.I have clockwork recovery installed (4.0.0.2), and the only buttons that work are home (goes back to the first menu), volume up/down, and power to hide the menus. I can't select anything at all, it seems like I have the international version of the recovery, not one for the S2.Anyways, I can't get into download mode by holding down the home + Vol up+ power, and Odin can't seem to connect to my phone if it's in clockwork recovery and not download mode.Would the jig work? Or is having no ability to boot into download mode pretty much a killer? I can access my phone through ADB, I just don't know my way around adb as well as I would like.Is there any way to flash a different recovery via ADB? Any other solutions to get my phone up and running again? Because right now it's not booting at all.
EDIT: Managed to get back into the system. It's running the International ROM instead of mine though, so the buttons are wonky. Does anyone know where I can find the ODIN files to flash back to stock AT&T S2?
Click to expand...
Click to collapse
:facepalm:
First off, that's not how you get into download mode. Turn the phone off, hold both VOLUME BUTTONS ONLY, and plug in the USB cable.
With my phone, If I hold down both volume buttons and power on, it goes to clockwork recovery. If I turn the phone on holding the volume up and the home button, it goes to download (now).
I fixed that issue already though, the problem at hand is that I have the i9100 boot and firmware on here, and need the stock Odin files to fix. Can't find the files though. : /
CadellG said:
With my phone, If I hold down both volume buttons and power on, it goes to clockwork recovery. If I turn the phone on holding the volume up and the home button, it goes to download (now).
I fixed that issue already though, the problem at hand is that I have the i9100 boot and firmware on here, and need the stock Odin files to fix. Can't find the files though. : /
Click to expand...
Click to collapse
http://hotfile.com/dl/145854922/8415983/I777UCKH7_I777ATTKH7_ATT.zip.html
CadellG said:
With my phone, If I hold down both volume buttons and power on, it goes to clockwork recovery. If I turn the phone on holding the volume up and the home button, it goes to download (now).
I fixed that issue already though, the problem at hand is that I have the i9100 boot and firmware on here, and need the stock Odin files to fix. Can't find the files though. : /
Click to expand...
Click to collapse
Also available in the Download Repository linked in my signature.
...me too....
WOW DISREGARD - too stupid to realize soft buttons work with CWM recovery. They didn't before...very premature post, my apologies
For the bootloop, I selected Advanced in CWM recovery, and then selected "Fix permissions" then I installed update from SD card. Now it works! Back to being a noob and hating my life.
-----------
I seem to have bricked my phone too...I was using ROM manager to install cm9 update (yeah, I NOW know I should not have used ROM manager). I used ODIN to re-flash cwm recovery enabled kernel. I can go to recovery, but it does not let me select any of the menu options. And when I boot the phone, it still sends me into a bootloop.
One time it did say "signature verification failed" but it doesn't say that anymore, it just doesn't move. I've read around about signature verification issues, but I haven't found anything that gets me anywhere.
I know this is pretty noobish, but I really appreciate any help!

Bricked S3

I flashed a kernel on my S3 via recovery and then reboot my phone. It goes to a black screen now. When I pull the battery and power on holding volume down to go into recovery the Samsung Galaxy S3 logo keeps appearing and disappearing until I let go of the volume down key. Then it's stuck at the same black screen. When I try to put the phone in download mode to re-flash via odin it does the same thing. I'm pretty sure I'm fu*ked, but I just want to make sure there's not a way to fix this. Any ideas?
Chaos Residue said:
I flashed a kernel on my S3 via recovery and then reboot my phone. It goes to a black screen now. When I pull the battery and power on holding volume down to go into recovery the Samsung Galaxy S3 logo keeps appearing and disappearing until I let go of the volume down key. Then it's stuck at the same black screen. When I try to put the phone in download mode to re-flash via odin it does the same thing. I'm pretty sure I'm fu*ked, but I just want to make sure there's not a way to fix this. Any ideas?
Click to expand...
Click to collapse
Don't worry..i have done worse things with my phone and yet to brick it..
Fist thing to go into recovery you hold vol up + power + home and not vol down..
Second thing what you will have to do is after the Odin flash..press and hold vol up+power+home..you will boot into the stock recovery..from here do a factory reset but mind you all the data on your internal sdcard will be lost when you do this..now reboot your phone..your phone will boot up properly now..assuming that you have flashed the firmware properly in Odin..
Chaos Residue said:
I flashed a kernel on my S3 via recovery and then reboot my phone. It goes to a black screen now. When I pull the battery and power on holding volume down to go into recovery the Samsung Galaxy S3 logo keeps appearing and disappearing until I let go of the volume down key. Then it's stuck at the same black screen. When I try to put the phone in download mode to re-flash via odin it does the same thing. I'm pretty sure I'm fu*ked, but I just want to make sure there's not a way to fix this. Any ideas?
Click to expand...
Click to collapse
As zoot1 replied to you for download mode press vol down+home+power for a few seconds......for recovery vol up+home+power.........
And make very sure the kernel you flash is compatible with your phone and firmware!!!!!!!!!!!! The rest zoot1 explained in his reply
Good luck
Sorta Bricked
Anyone have an idea what I've done.... Black screen with blue light. I can get to the recovery menu, clockwork is installed, but I can't flash a rom. The only way to get the phone to stay off is by removing the battery.
This is a Cspire L710. I've attempted to flash a Cspire_nandroid_stock zip, the phone will find it but can't open it. I missed a step somewhere I guess. I had it in download mode but made the mistake of trying the factory reset-which changed that.
I've also tried a couple of other roms with the same results.
db1117 said:
Anyone have an idea what I've done.... Black screen with blue light. I can get to the recovery menu, clockwork is installed, but I can't flash a rom. The only way to get the phone to stay off is by removing the battery.
This is a Cspire L710. I've attempted to flash a Cspire_nandroid_stock zip, the phone will find it but can't open it. I missed a step somewhere I guess. I had it in download mode but made the mistake of trying the factory reset-which changed that.
I've also tried a couple of other roms with the same results.
Click to expand...
Click to collapse
go to download mode and flash a stock rom via odin
Cant's get to Download mode
Unless there is a way to get to download mode through the recovery menu, download mode is not an option.
db1117 said:
Unless there is a way to get to download mode through the recovery menu, download mode is not an option.
Click to expand...
Click to collapse
Well i suggest u send it with its warranty or u could check out my sig and build ur own usb jig
Sent from my GT-I9300 using xda premium
You might be able to get to download mode via a usb jig.

S3 stuck in safe mode

My galaxy s3 has been stuck in safe mode for two days now which is frustrating as only the stock apps can be used. I have tried different solutions, which I list below.
How it happened.
I was initially on 4.1.1 and when I woke up I saw a notification to upgrade to 4.1.2, after that it did its thing and rebooted into safe mode.
solutions tried
1. Reboot - didnt work
2. take out battery for few minutes and reboot - didnt work
3. boot into stock recovery to try to factory reset phone, Volume button not working so cant select other option apart from reboot. - didnt work
4. Download stock rom from samfirmware and flash using odin - didnt work
5. Flash CWM using odin, didnt factory reset and flashed custom rom (omega). It boots into safe mode as well
6. Downloaded stock ics firmware, flashed using odin . it boots but stuck on samsung logo.
I dont know what else to do. Although am thinking downgrade the bootloader to one meant for ICS the try to flash to ICS stock rom again, would try this later in the day.
p.s Ignore more signature I own a galaxy s3 as well.
Switch off your phone..
Press the power button..
Once you see the logo screen press and hold the left capacitive button..
Sent from my GT-I9300 using Tapatalk 2
zoot1 said:
Switch off your phone..
Press the power button..
Once you see the logo screen press and hold the left capacitive button..
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
I already did that....still stuck in safe boot.
alphaola said:
I already did that....still stuck in safe boot.
Click to expand...
Click to collapse
I think its:
Switch off your phone..
Press the back or cancel(left) button..
Once you see the logo screen press and hold the left capacitive button..
Hey,
I'm having the exact same issue with my note 2. Wondering if you found a solution.
Anybody can help with this? I am having the same issue
use search, asked and answered too many times
I did search..
I tried everything.
full wipe, cache, dalvik, factory reset and it keeps saying safe mode.
so please help
EDIT:
i just installed slim rom, and it keeps saying safe mode...
s3 safe mode
one way work for me..
1-turn off the phone
2- remove battery
3- short + and - in battery connector for few minute
4-insert battery and turn it on
alphaola said:
My galaxy s3 has been stuck in safe mode for two days now which is frustrating as only the stock apps can be used. I have tried different solutions, which I list below.
How it happened.
I was initially on 4.1.1 and when I woke up I saw a notification to upgrade to 4.1.2, after that it did its thing and rebooted into safe mode.
solutions tried
1. Reboot - didnt work
2. take out battery for few minutes and reboot - didnt work
3. boot into stock recovery to try to factory reset phone, Volume button not working so cant select other option apart from reboot. - didnt work
4. Download stock rom from samfirmware and flash using odin - didnt work
5. Flash CWM using odin, didnt factory reset and flashed custom rom (omega). It boots into safe mode as well
6. Downloaded stock ics firmware, flashed using odin . it boots but stuck on samsung logo.
I dont know what else to do. Although am thinking downgrade the bootloader to one meant for ICS the try to flash to ICS stock rom again, would try this later in the day.
p.s Ignore more signature I own a galaxy s3 as well.
Click to expand...
Click to collapse
It's Volume button work fine??
The problem has nothing to do with reboot. As you can see have already mentioned reboot as part of the solutions I tried.
My device is fine with ICS firmwares but has issues with Jellybean (stock and modded rom including CM10.1). Currently am running ICS on it as thats the only way the phone works properly.
I installed 4.0.4 (XAALF2) via Odin, but it got stuck on samsung logo. Then turned it off and flashed CWM to do factory reset as the volume key doesnt work on stock recovery. After that everything worked fine. I was able to update to the latest 4.0.4 via OTA.
The problem is hardware, so you might want to contact Samsung.
I found some information about "Safe Mode".
It seems that every Android phone has a safemode.
"On Samsung’s devices, almost all users will be able to access Safe Mode with by pressing and holding the menu button during start up. If it’s a capacitive menu key, make sure to release and press again each time the LED under the key comes back on. You don’t want to miss the catch for Safe Mode because the button released itself."
Here is the link where i get the information: http://www.tested.com/tech/android/...ds-safe-mode-to-save-a-phone-from-boot-loops/
You can try it this way, maybe it will work.
Good luck.
Ic3y83 said:
I found some information about "Safe Mode".
It seems that every Android phone has a safemode.
"On Samsung’s devices, almost all users will be able to access Safe Mode with by pressing and holding the menu button during start up. If it’s a capacitive menu key, make sure to release and press again each time the LED under the key comes back on. You don’t want to miss the catch for Safe Mode because the button released itself."
Here is the link where i get the information: http://www.tested.com/tech/android/...ds-safe-mode-to-save-a-phone-from-boot-loops/
You can try it this way, maybe it will work.
Good luck.
Click to expand...
Click to collapse
I think u missing the point, the phone works fine with 4.0.4 firrmwares, it only get stuck in safe mode when updated to Jellybean 4.1.1 and above. No amount of key combination, factory reset or even custom rom was able to fix the safe boot.
The best option is to send it back to samsung, its definitely hardware issue.
alphaola said:
I think u missing the point, the phone works fine with 4.0.4 firrmwares, it only get stuck in safe mode when updated to Jellybean 4.1.1 and above. No amount of key combination, factory reset or even custom rom was able to fix the safe boot.
The best option is to send it back to samsung, its definitely hardware issue.
Click to expand...
Click to collapse
I'am sorry for misunderstanding u. I think you could be right. Maybe it is a hardware issue.
Don't forget to "unroot" and reset the "flash counters".
Greetz.
alphaola said:
My galaxy s3 has been stuck in safe mode for two days now which is frustrating as only the stock apps can be used. I have tried different solutions, which I list below.
How it happened.
I was initially on 4.1.1 and when I woke up I saw a notification to upgrade to 4.1.2, after that it did its thing and rebooted into safe mode.
solutions tried
1. Reboot - didnt work
2. take out battery for few minutes and reboot - didnt work
3. boot into stock recovery to try to factory reset phone, Volume button not working so cant select other option apart from reboot. - didnt work
4. Download stock rom from samfirmware and flash using odin - didnt work
5. Flash CWM using odin, didnt factory reset and flashed custom rom (omega). It boots into safe mode as well
6. Downloaded stock ics firmware, flashed using odin . it boots but stuck on samsung logo.
I dont know what else to do. Although am thinking downgrade the bootloader to one meant for ICS the try to flash to ICS stock rom again, would try this later in the day.
p.s Ignore more signature I own a galaxy s3 as well.
Click to expand...
Click to collapse
i did a reboot and it removed the safe mode :good:
My personal experience, i overclocked my SGS3 with Boeffla kernel on ARHD then i got freeze screen and phone reebot into safe mode, I entered into recovery and reebot then everithing was fine again.
Safe mode occurs when something in the phone is not working properly , could be hardware or software, however, stuck on it is not a good signal.
my advice is to send the device to service.
Do not forget to reset flash counter via Triangle Away and flash stock factory firmware.
Good Luck! :good:
note 3 stuck in save mode window
This problem occurs after changing to a new simcard not already installed before in the device.
1. Power off the galaxy note 3.
2. Remove the micro simcard from the slot by sliding.
3. Power on the device without the simcard.
4. It will run in a normal mode, if so, this will actually diagnosed that there is a simcard defined by the administrator as default. In the security setting in setting menu and for protection against theft, the original simcard must be insert to unlock this choice of detection of any change in new simcard. New simcard is defined as strange and theft suspected.
I hope this make you reach some solution for your trouble.
S3 SAFE MODE issue
Plz help....
On my s3 i9300, its always on safe mode. Tried FACTORY DATA RESET. Still on safe mode. Other issue is that on power on and off, back LED turns on for few seconds. Also volume down not working. These issues started after s3 went on safe mode. Any sloution??
shoeb_v said:
Plz help....
On my s3 i9300, its always on safe mode. Tried FACTORY DATA RESET. Still on safe mode. Other issue is that on power on and off, back LED turns on for few seconds. Also volume down not working. These issues started after s3 went on safe mode. Any sloution??
Click to expand...
Click to collapse
Same issue here, it is hardware
I went through a lot of threads and not one had a solution. So I will post here what worked for me.
Customer came to my store with Galaxy S3 (SPH-L710T) that was stuck in safe mode. I tried everything on this thread, nothing worked. Luckily I had a older Galaxy S3 (SPH-L710) with a broken screen, so I switched over the motherboard from the customer's phone to the old one - I did connect the customer's original LCD to the motherboard since my old phone had its LCD broken. Powered it on, no safe mode.
So at this point I just transferred the volume buttons flex cable to the customer's phone. Powered it on, no safe mode again.
Hope it helps someone!

Turning on phone stays on Galaxy Ace logo forever

Im turning on a Galaxy Ace and it says on the Galaxy Ace startup logo forever.
Is there any way to hard reset it? Trying to put it into Download Mode and/or Safe Mode the same exact thing happens.
When I turn the phone off and charge it thru AC, the battery icon comes on stating it is charging. Does Odin see it in tha moment so maybe I can flash it then? Like I said i cannot get into safe or download mode.
Im leaving the phone on and see if it will completely drain the battery and charge it up again from there.
riahc3 said:
Im turning on a Galaxy Ace and it says on the Galaxy Ace startup logo forever.
Is there any way to hard reset it? Trying to put it into Download Mode and/or Safe Mode the same exact thing happens.
Click to expand...
Click to collapse
Can you tell us what exactly happened that caused this problem? Like did you install a new rom, kernel, etc. Try taking out the battery and then put it on and press the Download Mode key combo. See if you can enter the Download Mode. Do post the result.
mahithm said:
Can you tell us what exactly happened that caused this problem? Like did you install a new rom, kernel, etc. Try taking out the battery and then put it on and press the Download Mode key combo. See if you can enter the Download Mode. Do post the result.
Click to expand...
Click to collapse
Well, WhatsApp "self uninstalled" itself as when I tried to see it in the Applications list all that appeared is "com.whatsapp" so I went ahead and redownloaded from the Play Store. It complained about there being low disk space but it told me that it installed it successful. I tried to open it and it said that it had stopped working. So I went ahead and turned it off. And ever since that, I try turning it on and it stays like that.
Like I mentioned, I try entering Download Mode and it stays the same way with the logo.
riahc3 said:
Well, WhatsApp "self uninstalled" itself as when I tried to see it in the Applications list all that appeared is "com.whatsapp" so I went ahead and redownloaded from the Play Store. It complained about there being low disk space but it told me that it installed it successful. I tried to open it and it said that it had stopped working. So I went ahead and turned it off. And ever since that, I try turning it on and it stays like that.
Like I mentioned, I try entering Download Mode and it stays the same way with the logo.
Click to expand...
Click to collapse
Can you enter Recovery Mode? If yes, try doing Wipe data/ factory reset and Wipe cache partitions. See if it works. If not, then try using the following guide to force open Download Mode from odin. The guide is meant for Samsung Galaxy Ace S5830 and thus the key combination mentioned in the guide is different. Since you are using Galaxy Ace S5830i, make sure to hold Vol Up+ Vol Down+ Power to enter the Download Mode. Here is the link,
How to unbrick Samsung Galaxy Ace
If your PC can't detect your phone, then its most probably the drivers that giving you that problem. Use the following guide to download all the necessary files including drivers,
Know your Device:Galaxy Ace GT-S5830i ~Root~Odin~CWM~ROM LIST
Do post the result. Hope I Helped
mahithm said:
Can you enter Recovery Mode? If yes, try doing Wipe data/ factory reset and Wipe cache partitions. See if it works. If not, then try using the following guide to force open Download Mode from odin. The guide is meant for Samsung Galaxy Ace S5830 and thus the key combination mentioned in the guide is different. Since you are using Galaxy Ace S5830i, make sure to hold Vol Up+ Vol Down+ Power to enter the Download Mode. Here is the link,
How to unbrick Samsung Galaxy Ace
If your PC can't detect your phone, then its most probably the drivers that giving you that problem. Use the following guide to download all the necessary files including drivers,
Know your Device:Galaxy Ace GT-S5830i ~Root~Odin~CWM~ROM LIST
Do post the result. Hope I Helped
Click to expand...
Click to collapse
This is stock. I dont have any recovery installed on this phone.
Like i mentioned, i tried entering both safe mode and download mode and it just stays stuck there on that same screen.
is there a way to do it when the phone is off or thru a microsd card???
riahc3 said:
This is stock. I dont have any recovery installed on this phone.
Like i mentioned, i tried entering both safe mode and download mode and it just stays stuck there on that same screen.
is there a way to do it when the phone is off or thru a microsd card???
Click to expand...
Click to collapse
First of all, there is always a Recovery Mode in your phone. If you haven't installed any separate one's, then you will have the stock Recovery Mode. To enter it, hold on Vol Up + Home + Power button while switching on your phone. Pressing the Download Mode combo normally and pressing the Download Mode combo while your phone is connected to odin is an entirely different thing. Now you can also try the USB Jig but let me tell you its not always guaranteed to work. If USB Jig did work, then it will force open the Download Mode and you install the stock rom back using odin. If none of the above works, then its better to consult the Service Center as it could be a hardware problem.
riahc3 said:
This is stock. I dont have any recovery installed on this phone.
Like i mentioned, i tried entering both safe mode and download mode and it just stays stuck there on that same screen.
is there a way to do it when the phone is off or thru a microsd card???
Click to expand...
Click to collapse
Switch off your phone and Press volume up + home button + power on button together then u will be in recovery mod..there wipe data/cache and then press reboot system now..see if it works or not..
Sent from my GT-S5830i using Tapatalk 2

HELP! Deleted OS by accident and cant access Recovery Mode TWRP and now bootloop

Hello there, I own a galaxy s3 for quite a while and I remember I rooted the device and flashed the Revolutionary S5 ROM via odin long time ago (I did all this with the help of several youtube videos because I am an ignorant in this matter).
But well the problem started when I was going to make a factory reset to the phone because I lent it to a friend and when I got it back I just wanted to clean it and wipe all the info. I entered to recovery mode (twrp) and by accident I wiped all the phone had including te OS. I noticed it because when I was going to power off the phone in recovery mode it told me that there was no OS.
So now the phone is in a bootloop, because when I try to turn it on I only see the samsung galaxy logo and thats it, the same when I plug the phone to the power it only shows the battery screen.
I also have the problem with the volume up key that doesnt work so I cant access the recovery mode. Only the download mode using the volume down+home+lock button combination but still i cant do anything because of the volume up buttom that doesnt work.
If someone can help me with this problem I would really appreciatte it. Explaining me like a 5 yo.
Do you have access to a USB jig that will force the phone into download mode?
audit13 said:
Do you have access to a USB jig that will force the phone into download mode?
Click to expand...
Click to collapse
No I dont, I can enter download mode by pressing the volume down + home+ lock button. But after that I cant do anything else because in download mode it tells me to press volume up to continue and volumen down to cancel. And unfortunately my volume up button doesnt work.
Any ideas?
The jig will put the phone into download mode, no buttons required.
To use the jig, remove battery, insert jig, insert battery.
audit13 said:
The jig will put the phone into download mode, no buttons required.
To use the jig, remove battery, insert jig, insert battery.
Click to expand...
Click to collapse
Thanks, I will try to find a usb jig and do that.
Any other way I can get into download mode without the jig?
I don't know of any other way to get into download mode.
The jig works with many models of Samsung phones.
Op states he can access download mode but not recovery. Flash the latest stock firmware twice via odin and factory reset in between flashes. Make sure the firmware matches your phone region etc and must android 4.3.
Beamed in by telepathy.
shivadow said:
Op states he can access download mode but not recovery. Flash a stock rom twice via odin and factory reset in between flashes.
Beamed in by telepathy.
Click to expand...
Click to collapse
Sorry to bother you but can you tell in depth how to do that without using the volume up key, because I cant fully access the download mode. I just get stuck in the screen that says press volume up to continue or volume down to cancel.
Solved.
Maybe its not the best way to fix it but I inserted a little blade into the volume buttons and took the button out, I clean it a little bit and inserted it so that the volume up key could function (not fully). So that way I accessed recovery mode and flashed the rom I had using an extsd card where I previously copied the zip of the rom. Now I will flash the stock rom twice and who know from there.
Thanks all for your answers
gera092 said:
Sorry to bother you but can you tell in depth how to do that without using the volume up key, because I cant fully access the download mode. I just get stuck in the screen that says press volume up to continue or volume down to cancel.
Click to expand...
Click to collapse
Ah, ok then that isn't download mode at all.
Looks like you'd be best sending it to a repair shop because at this point you need the buttons working. You could dismantle the phone and short the button pad with a small metallic object but if your skills don't range to that i would advise against it as it is very easy to damage the component when shorting it out manually.
Beamed in by telepathy.

Categories

Resources