Ok so Iv manged to finally get the screen to say "waiting for device" But thats when the phone is on..
If i restart with VOL DOWN and power into FAST BOOT USB AND I GO type in the cmd " fastboot oem get_identifier_token."
It says >>>>>> <Bootloader> [ERR] COMMAND ERROR wTF is the issue? I downloaded a ADB tool that installed in my CMD, I tried the SDK and it never would take always threw up error etc, so I ran across something else and its the Furthest iv gotton so far..
Only issue now is This ERROR when im in FASTBOOT USB.. Ive got a Virgin Mobil.. HBOOT 1.58.0000
Also on the HTC DEV site when i would go to DL the Zip for windows, At one point it kept saying ADB etc is missing.. So i found a program with the main tools that makes it do what it needs to without all the extra stuff SDK installs, Which again BTW would never fully extract and work..
So i go to the zip file i download for windows and now i go to run it, and it throws up the CMD window for half a sec and i can see allot is filled out but it goes rite away... So as i said this is the furthest ive gotton to unlocken it.. What could be causing this???
I can walk you through it, I don't know what is in the zip you down loaded
Cant view code sent in email from htc dev
jcfunk said:
I can walk you through it, I don't know what is in the zip you down loaded
Click to expand...
Click to collapse
So ive manage to get my Phn to work for me and the program i DL/// . I got my token from HTC DEV, But now my only issue is The email they sent me with the code in it, I cant view it??
Does it take some kinda special view? It says its a UDF code or something? like that.. IM SOO CLOSE to unlocking it but so far at same time..
I never could get sdk tools to DL i found a ADB program that managed to make everything work just fine. It went from Pulling up NOTHING IN CMD for my phone, then with that simple download of the ADB program, It was a program someone just put the main things needed together and left out all the XTRA BS that SDK tools come with, SDK tools never once downloaded or open rite..
But as i said Ive pasted the TOKEN!! GOT SENT THE EMAIL, But the code attachment sent is not viewable, I have never run across something like this.... Ive also posted in EVO 3D about this issue, But anyone have a idea what i need to view the code?
BTW THIS IS THE SITE I DL THE PROGRAM FROM THAT FINALLY got me to get my CMD prompt to work for my phone and eventually give mmmmme my token..... Take a look at it... It might be allot easier new way for newbies in the future.
http://dottech.org/21534/how-to-install-adb-and-fastboot-on-your-windows-computer-for-use-with-your-android-phone/
It's not viewable easily, you send file to phone using fastboot commands. The phone will bring up a screen asking you if you want to unlock
jcfunk said:
It's not viewable easily, you send file to phone using fastboot commands. The phone will bring up a screen asking you if you want to unlock
Click to expand...
Click to collapse
Im new to this whole thing, My issue also is I only have one smartphone, the one im unlocking and im just running it on wifi.. But Could i still send it to my phone somehow? Or is there another way to view the damn code>? I cant believe This one thing is holding me up..
it says this " VLC does not support the audio or video format "undf". Unfortunately there is no way for you to fix this.
Ive saved it to the Folder that Has FastBoot and adb (The code sent to my email).. Then i go past in cmd" fastboot flash unlocktoken Unlock_code.bin"
But it just says error Cannot open Unlock code bin.
When i saved the program with the fastboot etc in it, I just made a New Folder, How do i make it a spefic location.. ? Like for example
C:\ANDROID
OR C:\ADB tHAT way i can type it into the CMD prompt an it recognize it? Im thinking thats one of my main problems now as well...
At first i saved my new files to My documents.. Then i sent the ones with ADB &FASTBOOT to lOCAL DISK C:\
Where am i going wrong?
You need to be in the directory with the fastboot.exe and unlock.bin
Man it has been awhile for me to use Windows.
Maybe easier to make a folder in c:\
everything needs to be in same folder
---------- Post added at 11:22 PM ---------- Previous post was at 11:19 PM ----------
Use Linux it's easier
Forget about HTC DEV it won't work with hboot 1.5+. You'll want s-off to be truly rooted anyways, and HTCdev will only unlock you.
You'll need to downgrade the bootloader to 1.4 and ROM(main) version to 1.13. Then run Revolutionary S-OFF, then reupdate the hboot back to 1.58 and main version back to 2.95.
I only know the process for my sprint cdma. However, none of my carrier settings were altered during that process, so I can say with quite a bit of certainty that the same process / RUU files can all be used on your phone as well
I put together a pretty clear noob guide in the first post of the lnk below. Took me 3 or 4 days with the help of two other members here, so when I finally got S-OFF I put together a summary of the whole process include all the links to the tools / files needed.
You'l need
blank CD and burner, know how to boot from a CD
data USB cable
Micro-sd adapter so you can load files onto your phone's micro-sd from your PC
http://forum.xda-developers.com/showthread.php?t=2794935
Good luck
---------- Post added at 01:55 AM ---------- Previous post was at 01:24 AM ----------
As for the HTCdev unlock....I used ROOTEVO3DNEW instead of the fastboot binares that HTCdev gives you(C:\Android). Create a new folder in C:\ and name it rootevo3dnew. Unzip all rootevo3dnew.zip contents into that folder. This is the folder where you will do everything instead of C:\Android...place the unlock key .bin file directly in the main directory of rootevo3dnew . Type cd \rootevo3dnew in cmd to change the directory and repeat the process as you would with C:\Android
Chances are that will not work either, you will need to do the brick / downgrade
Related
so i tryed unrooting my evo 3d and got stuck on the last part geting the bootloader to say s-on.. Now i want to root it again for my friend cause he wants to buy it.. so my question is what do i have to do to get root back??? its stock rom stock recovery but i still have s-off.. can i flash a custom revovery and i have thaT su zip on my sdcard.. can i flash that and ill have root again?? i tryed looking this up but didnt find nada??
I assume you never found out how to open a command prompt??
evolving said:
I assume you never found out how to open a command prompt??
Click to expand...
Click to collapse
no.. lolz!
evolving said:
I assume you never found out how to open a command prompt??
Click to expand...
Click to collapse
nope!! lol.. now my friend wants me to get root back for him.. sucks wish i would have just left it alone
really??????? google search how to open a command prompt that was simple enough.the tutorials are well put together and easy to find just put in some work and you could prolly get somewhere.
evod3 said:
nope!! lol.. now my friend wants me to get root back for him.. sucks wish i would have just left it alone
Click to expand...
Click to collapse
Well to open cmd prompt. Do this
On your keyboard there's a window key. Its the key with the Microsoft "windows" logo on it. Located on the bottom left hand side of the keyboard.
Now press the window key and then the letter "R" . A little box will appear. When the little box appears type in "cmd" then hit the enter key. The black cmd prompt window should appear. If you still help with this let me know.
""Shooter on Deck""
im all set now thanks anyways..
fastboot oem lock from the SAME folder as your adb while in command prompt...for example my setup is (open command promt, cd c:\android-sdk\platofmr-tools, fastboot oem lock)
thats how you relock it if you are hboot 1.50 or used htc unlock method..you must do this is you plan to RUU the phone back to factory. if your still s-off and want to re-root just install a ROM with root preinstalled
Okay, so i have looked and searched all the forums and yet no answer..
First thing first: I have a Mac - so i found the thread for using the terminal and getting the unlock code from HTCdev - no prob it was easy
Now here is where I get stuck i save the Unlock_code.bin into my android folder but when I go into terminal I get this message and I have tried with diff. generated tokens and codes.
/android/fastboot flash unlocktoken Unlock_code.bin
error: cannot load 'Unlock_code.bin'
Suggestions ??
Help!! and since I am a NOOB i can't post in the XDA developer forum where most likely there is an answer - no offense.
This might be a long shot, but when you copy and paste the code, is there something like INFO or bootloader in front of every line? I remember seeing somebody having that problem, and they were also on a mac. If there is, do the code without that and it should work.
I already did that received the email from HTCdev and the attachment saved it in my android folder and when I go to do the last step i get that error message.
You can't post in the dev forum because that is for releases only so you wouldn't be helped if you posted there. Have you tried flashing the token with windows? Does fastboot have the correct permissions to read and write to the folder?
huh
this is my 1st android phone... i have a macbook pro. So what do you mean flashing the token with windows?...permissions as far as? I'm on the verge of jus sayng f it.. not worth this much worth was easier to unlock my blackberry and my ipod than this smh...
Im getting this "error: cannot load 'Unlock_code.bin" when trying to fastboot flash the unlock code htc dev sent me.Is anyone else seeing this or know how to get around it. I do have my unlock code in my platform tools folder which is where I open the command prompt from. I have also tried 2 different browsers. Im pretty sure its not my adb setup as I have unlocked my wifes rezound, my gnex,and also my n7 with it. Im at a loss. Any ideas or thoughts in getting this thing done are appreciated !
wireman2161 said:
Im getting this "error: cannot load 'Unlock_code.bin" when trying to fastboot flash the unlock code htc dev sent me.Is anyone else seeing this or know how to get around it. I do have my unlock code in my platform tools folder which is where I open the command prompt from. I have also tried 2 different browsers. Im pretty sure its not my adb setup as I have unlocked my wifes rezound, my gnex,and also my n7 with it. Im at a loss. Any ideas or thoughts in getting this thing done are appreciated !
Click to expand...
Click to collapse
I got it! Gave up last night and got up this mourning and went through the whole unlock process agian. this time the code they sent in the email worked
I have the phone in Bootloader mode (holding down power and volume down keys). I have all the required software installed. I use the command prompt to get my token and copy the info into the requisite slot in the HTC website window and when I hit the continue button I get an error message "Error Code: Invalid Bootloader Token Length.
Error Reason: The submitted Token appears to be the wrong length and won't work"
I have tried multiple times on two different computers. Always the same error. It is 7:30 pm EDT. I need help cuz I may be running out of time.
DiggerG said:
I have the phone in Bootloader mode (holding down power and volume down keys). I have all the required software installed. I use the command prompt to get my token and copy the info into the requisite slot in the HTC website window and when I hit the continue button I get an error message "Error Code: Invalid Bootloader Token Length.
Error Reason: The submitted Token appears to be the wrong length and won't work"
I have tried multiple times on two different computers. Always the same error. It is 7:30 pm EDT. I need help cuz I may be running out of time.
Click to expand...
Click to collapse
You aren't copying it right. Read the instructions and ensure you are only copying the information it wants
Sent from my HTC One using xda premium
Finally got it to work, but I'm not sure what I did differently. Put Command prompt window next to website window and that did it, but don't know why. Anyhow I have my email.
And I'm unlocked!!!
mine is stuck at waiting for device after i put in the command. Is there anyway anyone can send me the fastboot, adb, and adbwinapi.dll they used? I'm wondering if mine just isn't the right one but they should be. also i have the phone hooked up first and then go into fastboot and it says fastboot usb before i type in the command
thanks for any help
What do you mean "Stuck waiting for device after I put in the command"? If you pm me an email address, I can send the files tonight when I return from work.
DiggerG said:
What do you mean "Stuck waiting for device after I put in the command"? If you pm me an email address, I can send the files tonight when I return from work.
Click to expand...
Click to collapse
I type in "fastboot oem get_identifier_token" and then it displays waiting for device but doesn't do anything after that I waited for 30 minutes the first time and it stayed saying that. Ok I'll PM it now thank you
brom66an6 said:
I type in "fastboot oem get_identifier_token" and then it displays waiting for device but doesn't do anything after that I waited for 30 minutes the first time and it stayed saying that. Ok I'll PM it now thank you
Click to expand...
Click to collapse
The device isnt connected properly to the computer. Make sure you open your command prompt in the android folder and have the files within the same folder (i did this on OS X)
And then check to make sure you the computer recognizes the phone with
fastboot devices
You should see your device listed if it is connected properly.
brom66an6 said:
I type in "fastboot oem get_identifier_token" and then it displays waiting for device but doesn't do anything after that I waited for 30 minutes the first time and it stayed saying that. Ok I'll PM it now thank you
Click to expand...
Click to collapse
Did you install the HTC Sync Manager or install the HTC USB drivers from another source? Your phone won't be detected until you have the drivers installed. (I'm assuming you're using a Windows computer)
brom66an6 said:
mine is stuck at waiting for device after i put in the command. Is there anyway anyone can send me the fastboot, adb, and adbwinapi.dll they used? I'm wondering if mine just isn't the right one but they should be. also i have the phone hooked up first and then go into fastboot and it says fastboot usb before i type in the command
Either need htc drivers or your not in fastboot usb/bootloader
thanks for any help
Click to expand...
Click to collapse
If your getting that error, you have fastboot and adb but you haven't installed htc drivers yet.
If you don't have fastboot/adb files you will get a unknow command error.
Sent from my SPH-L710 using Tapatalk 2
*edit - I got it taken care of now i uninstalled and reinstalled the drivers and it worked this time. Thank you everyone for the help.
has anyone received the "Error Code (10) A request for the USB descriptor failed" error message? i can't get my laptop to seen my device in fastboot mode. i've installed/uninstalled the HTC drivers but no change. weird part is that i can communicate with my device via ADB when booted normally. any suggestions would be appreciated.
Waiting (and waiting) for device
18th.abn said:
If your getting that error, you have fastboot and adb but you haven't installed htc drivers yet.
If you don't have fastboot/adb files you will get a unknow command error.
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
I'm having exactly the same issue as brom66an6. fastboot starts, but never proceeds from "waiting for the device". If this is a driver problem, what drivers need to be installed on the phone?
what next??? I have the identifier token..
DiggerG said:
And I'm unlocked!!!
Click to expand...
Click to collapse
Great for you, I can't wait to get there myself.
It was late last night and I was one click away, but wan't sure how long until the next break stop would be, so I went to bed.
Now, I cannot recall what I was supposed to do. Can anyone please shed some light on the next instructions, I can no longer access these as I believe it was shown when you click to continue??
I have all the files/drivers and token placed in the same location on my drive and as a guess I've also copied the token .zip file to the SDcard on my HTC One X (vodafone stamped
I really wished they have a removable battery and media card support!! I have just purchased a new battery from eBay that proclaims a new chip on it that prevents overcharging. So that should be interesting, since the HTC charger is not a switching charger like my BlackBerry ones were.
What I want:
ROOT
a new clean/fast/efficient ROM, was thinking clockworkmod.
Since I have zero experience and limited time to troll through forums these days, I am really finding it hard to find a REALLY simple step by step guide to perform this. I know, it's not a simple proccess, I know, but perhaps just the steps in a efficient, simple list, overlooking stuff like backups etc, but perhaps a TIP to mention it would be a good idea as the next step will wipe everything etc
Thanks if you're still reading and perhaps WERE at my stage once before.
I'm sure custom ROMs are a personal preference, but any bad points about ROMs would probably be better than selling the good points.
CWM should be fine for my first attempt???
MANY thanks in advance for your time.
Steve.
[EDIT]
I'm now unlocked!!!!
I found the website that I was following, it is fantastic and just the right amount of simple for me.
Check it out...
www*droid-now*com/2013/08/htc-one-unlocking-bootloader-installing-custom-recovery-and-root/
Amazing Thanks..
DiggerG said:
Finally got it to work, but I'm not sure what I did differently. Put Command prompt window next to website window and that did it, but don't know why. Anyhow I have my email.
Click to expand...
Click to collapse
That sounds stupid... but it works, worked for me...
hi
i am trying to unlock the bootlaoder for my new htc m9
after i got the unloch_code, i receive this msg in cmd
target reported max download size of 800000000 bytes
sending 'unlocktoken' (0 KB)...
OKAY [ 0.009s]
writing 'unlocktoken'...
(bootloader) flash unlocktoken
(bootloader) [KillSwitch] : /dev/block/bootdevice/by-name/frp
(bootloader) [KillSwitch] Last Byte is 0X01, enable unlock
FAILED (remote: UnlockToken Verify Fail!!)
finished. total time: 0.038s
please help
what is missing ?
Can someone answer this
My htc one x9 gets recognized by my laptop everything works well
Lequired software is installed properly
And i try to type in fastboot devices and my phone appears to be in fastboot
But when i type fastboot oem get_identifier_token it says FAILED(remote:unknown command)
Finished.time:0.005
Plz im begging for help
Mine struck after the entry of code fastboot OEM get_identifier_token and my device is already detected and it's showing three dots "..." And that's it
For some reason, my old HTC One would not be recognized in the toolkit's command prompt windows. I would send a command using the toolkit and every time, I get the "device offline" error. So after my old HTC One bricked itself and wouldn't power on anymore, I had T-Mobile replace it with a new one. So I get this new replacement in the mail and the first thing I try to do is use Hasoon2000's toolkit to unlock and root it. No luck with it either, I get the same "device offline" error. What am I doing wrong?
It's strange though because whenever I open up a command prompt window by itself, and run the adb devices command, it gived me back the ID number for my One. But it only shows offline when the toolkit runs a command in command prompt!
I could really use all of your help! I need to restore everything with titanium already!
Thanks!
AChavitez said:
For some reason, my old HTC One would not be recognized in the toolkit's command prompt windows. I would send a command using the toolkit and every time, I get the "device offline" error. So after my old HTC One bricked itself and wouldn't power on anymore, I had T-Mobile replace it with a new one. So I get this new replacement in the mail and the first thing I try to do is use Hasoon2000's toolkit to unlock and root it. No luck with it either, I get the same "device offline" error. What am I doing wrong?
It's strange though because whenever I open up a command prompt window by itself, and run the adb devices command, it gived me back the ID number for my One. But it only shows offline when the toolkit runs a command in command prompt!
I could really use all of your help! I need to restore everything with titanium already!
Thanks!
Click to expand...
Click to collapse
Where you able to fix this problem? I have the same problem too if you fixed yours how did you slove this problem?
I noticed this too, I put it in boot loader manually. And with every command ran on the tool out have me that message, but upon closing out the pop up screen, I'll get another where the command went through. Got my device back from repair yesterday and managed to s off again.
T-Mobile HTC One
fmedrano1977 said:
I noticed this too, I put it in boot loader manually. And with every command ran on the tool out have me that message, but upon closing out the pop up screen, I'll get another where the command went through. Got my device back from repair yesterday and managed to s off again.
T-Mobile HTC One
Click to expand...
Click to collapse
So you put it in bootloader manually AND THEN you were able to use the toolkit successfully? Do you have to to do it manually every time you want to make a change with the toolkit?
Well I just used the kit to unlock boatloader, and flash recovery. After doing so I restored the Rom I was on and s-off'd the device using firewater. Device shows online now so if I was using the tool, booting manually into boatloader shouldn't be required but yes to the first question
T-Mobile HTC One