Hello,
Yesterday I managed to unlock the bootloader using the L9-UnlockTool-v01. The bootloader is unlocked (I saw the message about that in S/W mode). By the fact that I'm using Windows 8.1 64bit, I had to install the recovery by flashify (CWM by artas182x v6.0.3.5). Everything is installed, so I went to do a wipe and install a new ROM. During the installation I get an error - status 7 error (log below). I tried to install: AxxionKat 1.4.0 and Resurrection Remix® 5.1.5, every time the same error occurs. When I want to go in S/W mode, the phone immediately goes to recovery. When I try reboot, it shows the LG logo and after a few seconds the phone reboots and goes into recovery. Works only reboot into recovery and bootloader.
Log:
pastebin com / DLJbe40a
Related
I was trying to flash the stock recovery, in order to install the new OTA update. I was in Rom Manager, and hit "boot to recovery". Now it boots to LOGO, tries to boot to recovery then loops back. I can get to the Download mode, but the installed driver is not recognizing. Unidentified device. If I force the driver, it gives me a code 10 error, Could not turn device on in the windows device manager.
Any help would be appreciated.
After trying many things, post 55 saved the day. http://forum.xda-developers .com/showthread.php?t=1195861&page=6
Hi!
I'm so stupid. I wanted to install cm12.1. So I rooted phone, unlocked BL. Then, I had first problem - when executing adb oem-unlock BL has unlocked and phone go to fastboot. But my comp couldn't recognize it (heard plugging in and out sound repeatedly). And here comes my "stupidity". I installed flashify and flashed CWM by it, got to CWM, installed cm12.1 zip. Of course wiped all data. Because I didn't flashed boot.img cm12.1 was freezing on fist setting up screen (nothing was working, just power button - pushing 10s turned off phone).
I wanted to flash boot.img by fastboot. But I still had problems with drivers(omap4boot didn't work). So I tried to recovery system by LG Mobile Support Tool. Everything got fine, but then phone stuck on the LG logo.
S/W Uprgade mode works of course, but I can't get to recovery now.
I'm using Windows 8.1
Any ideas?
Edit.
Ok, so I tried to install omap again. I did it, but the phone is still repeatedly conecting and disconnecting and in device manager I cought omap4430 driver whith waring mark for a while. Any ideas now?
Is it the non-animated LG logo?
This should work:
http://forum.xda-developers.com/showthread.php?t=2748384
The download links for the firmware are probably not up to date. Use this to download: http://forum.xda-developers.com/showthread.php?t=2287573
If your phone still goes beyond the non-animated logo, there might be easier solutions.
It was after animation.
Anyway, I have finally solved this problem by installing new system using Bride's solution with full wipe.
So i have a metro pcs lg k10 ms428 and i have already unlocked the bootloader (this is my first time trying to root) and i have found multiple unofficial twrp for my device. however when i try to do anything with flashing the twrp whether its clearing the recovery cache or trying to install the twrp i get a "failed Error: unknown command and if i try to boot into recovery mode i get a dead android with a red triangle. i have a windows computer with my phones drivers installed and adb.
hi Guru's
I have unlocked the boot loader
and get the warning about unable to check software for corruption please lock the bootloader.
I have followed the steps about installing twrp using ADB and all appears to go well no error messages
when I reboot it still goes to the same unable to validate the software and when i select to go to the recovery mode it goes but does not allow to install the SU binary with an error21 signature verification failed
Ideas?
Thanks
Use magisk
Team Win Recovery Project (TWRP) is an open-source software custom recovery image for Android-based devices. It provides a touchscreen-enabled interface that allows users to install third-party firmware and back up the current system, functions often unsupported by stock recovery images. It is, therefore, often installed when rooting Android devices, although it isn't dependent on a device being rooted to be installed.
DOWNLOAD
TWRP 3.2.3.0
Flashing Instructions
Make sure you have fastboot drivers installed and your bootloader is unlocked
Download the file
In fastboot open the directory of downloaded file and type
fastboot flash recovery recovery.img, after that type
fastboot oem reboot-recovery, You'll have a black screen on your display wait for 5-10s you'll be greeted with TWRP screen if you still didn't get the screen then press power button 2-3 times
BUGS
Data decryption ( For this you need to select Wipe -> format data (You'll lose all your data in this process) )
No Battery% ( I purposefully disabled it as the battery% always stays at 50% so I'll find the battery% path and fix this in the next build)
Flash force encrypt disabler in recovery to fix magisk module installation and other data partition related issues.
Source Code: TWRP source, Device Tree and Kernel Source
Tried to install recovery twrp v 3.3.0 and 3.2.3, stuck in bootloop flashing recovery is successful but while rebooting its continues in loop after showing lenovo sign (Orange Mode), started due to reboot problem, oem unlock was successful as well, please help
pankajyadav_18 said:
Tried to install recovery twrp v 3.3.0 and 3.2.3, stuck in bootloop flashing recovery is successful but while rebooting its continues in loop after showing lenovo sign (Orange Mode), started due to reboot problem, oem unlock was successful as well, please help
Click to expand...
Click to collapse
By reboot problem if you mean, the phone getting restarted randomly in loop then the only way to fix it is to go to the service center.