Related
Hi all, I know there aren't too many ATT specific cases out there yet, but I did want to do a quick review of the one that I ordered from TPU-cases (I got mine off ebay, but they have a regular site as well).
The one specifically I got was the Matte Back Black Flexible TPU Case.
Overall, the case quality is solid -- compared to other TPU cases I've had in the past. It's solid enough to provide basic protection, but not too flexible (like silicon) that you have to worry about it stretching and losing its shape over time.
I opted for the matte black version, but I believe that there are other types to whatever fits your fancy. (I think the matte was/is so popular, it may be out of stock).
The other nice thing is that they throw in a free screen protector. It's a decent clear one (not anti-glare), which is my preference. It's not on par of the quality of let's say a Realook or a SGP, but for free, who's going to complain?
So on to the case review...
1. I've attached a few photos to show the overall fit of the case. It fits well, and doesn't add much thickness to the case at all (which is a huge plus for me).
2. There is a little bit of a "lip" on the front, so it you do place your phone face down on a table, it leaves enough gap to protect the screen (as opposed to laying completely flat).
3. There is a decent size cut out for the power button, but the volume rockers are actually covered. However, no functionality loss on the power buttons -- in fact I think they may actually make it easier to use.
4. There is a cutout for where a lanyard hole should be -- (aka the international version), but no biggie here.
5. On the bottom, standard cutouts for the microusb port and the primary mic.
6. For the back, nice cutouts for the camera and the speaker on the lower right.
Now for the million $$$ question -- is the top aligned correctly for the secondary noise cancellation mic???
Fortunately the answer is YES! I believe this case was originally made for the international version (evidence from the lanyard hole), but the designer -- either in a stroke of pure genius and foresight (or just plain laziness) made the top cutout for the mic large enough where it does not cover the off-center version of our mic. So it looks like it could accommodate either the international or ATT version of the SGSII. I've tried to get a close up of the top so that you can see what I am talking about.
Overall -- for a shade under $9 USD for a nice looking/fitting case and a screen protector - I would say it's a great deal.
As I mentioned earlier, unfortunately it looks like the matte version is out of stock, but the other versions should be just as good.
Site: http://goo.gl/U4KHI (main site) or you can check ebay under the seller "TPU-cases" -- http://goo.gl/kNzh1 (ebay store)
UPDATE: I didn't realize they also have an Amazon storefront, so it's available from several sources: http://goo.gl/ltQnW
I have the same exact case for my international sgs2. It's pretty good, though some micro usb cables don't work with it.
Edit: got mine from their amazon storefront.
Sent from my GT-I9100 using Tapatalk
Exact same case. Bought from Amazon for 10 bucks, prime shipping. Costly for tpu, but it had cuts for top mic as well. Fits perfectly.
Sent from my SAMSUNG-SGH-I777 using xda premium
I bought this along with the gloss black. I am using the gloss black as I think that it looks better (my opinion) as this matt one looks a little worn out of the box. This is only my opinion.
I was just checking out these cases on amazon and i wonder, is this the closest thing to the flexible TPU case that bodyglove made for the Captivate? It sounds like you may have had the same case for your previous phone, how does it compare?
For those who are wondering, this is the old case http://www.amazon.com/Body-Glove-Mirage-Samsung-Captivate/dp/B0040M7H96. If bodyglove made the same exact thing that fit the GS2 i would buy it in a heartbeat!
If these cases are the closest thing available i might just have to get one to see for myself. How do you like the case now that you've had it for a little while?
ZionExpress said:
I was just checking out these cases on amazon and i wonder, is this the closest thing to the flexible TPU case that bodyglove made for the Captivate? It sounds like you may have had the same case for your previous phone, how does it compare?
For those who are wondering, this is the old case http://www.amazon.com/Body-Glove-Mirage-Samsung-Captivate/dp/B0040M7H96. If bodyglove made the same exact thing that fit the GS2 i would buy it in a heartbeat!
If these cases are the closest thing available i might just have to get one to see for myself. How do you like the case now that you've had it for a little while?
Click to expand...
Click to collapse
Actually I did have the BodyGlove case for my Captivate since it was one of the first decent cases to come out. I am not sure if you had this issue or not, but I have some scratches at the top of my phone (small ones though), but I do believe it was caused by the BodyGlove case (perhaps a little too rough on the inside).
But as for the overall material of the case -- yes, the BodyGlove case is also TPU, which is the same material. The only difference is the BodyGlove was solid black with some texturized ridges, and this case is matte black (but they also come in semi-transparent -- just comes down to your choice in visual aesthetics).
If you liked the material of the BodyGlove, then I think you'd be happy with this one as well.
i have this same case, its nice
Ditto, great case for the money. Switched to a mesh cover though as I find it's a bit sleeker, but keeping this as backup.
Love this case...
http://www.amazon.com/Optimus-E970-HYBRID-Silicone-Black/dp/B00ATIEB4E/ref=cm_cmu_pg__header
This is a pretty decent hybrid case. I uploaded a few pictures to Amazon to give more people a better chance to see what it looks like since the seller only uploaded a picture of the back, and I have the only review on Amazon as well if you want to hear what I thought about it. Basically, it's a good fit but I'm not the biggest fan of how it feels in my hand and how much thickness it adds. I honestly feel like they could have made the silicone thinner where it's covered by hard plastic and reduced the overall thickness by a lot. It's not the end of the world, but we'll see how long I have it on there before I take if off and go all slim-n-sexy again.
Also, for whatever reason Amazon didn't like my picture of the packaging so I'm attaching a picture of the mailer it comes in and the packaging you have to open. It's pretty standard stuff, but it's here for you to look at just in case.
Edit: Typo.
How do the buttons feel?
They are a little bit cheaper if you order from
eBay Seller: hc-power --- Multiple Colors and Hybrid Designs
http://www.ebay.com/sch/m.html?_odk...046732.m570.l1313&_nkw=e970+silicone&_sacat=0
This is the case I decised on too. I works, very light, but I'm not sure how much protection it offers. Coming from a Seidio Active case on an iPhone 4, this is a let down, but there aren't many choices. I'd rate it a 6 overall
KarlP said:
This is the case I decised on too. I works, very light, but I'm not sure how much protection it offers. Coming from a Seidio Active case on an iPhone 4, this is a let down, but there aren't many choices. I'd rate it a 6 overall
Click to expand...
Click to collapse
Agreed - But there's not much case love for the AT&T OG so we're at the mercy of this type of case unless Seidio or Otterbox or such changes their mind about making something for us.
I got this case off eBay, just received it yesterday. For a case being under $10 its not bad and I feel it will protect it from a mild drop just fine. Also the silicone on the front has a raised lip so if you set the phone face down its not on the screen. The only real down side is that the case covers the power button so no notification light now.
I'll add pictures of mine, since its blue might be easier to see then the black case.
Sent From My LG Optimus
How does the case feel?
I purchased the one from Ventev that looks identical to this case. I sent that one back because the "TPU" it said the case was made of was really hard kinda felt like plastic. That made the buttons hard to push. Is the rubber the case made out of hard or soft like tradition TPU? I want this case because I like the two layers of protection but I dont want another case that was like the Ventev case. For now I have the Diztronic case on it and I took the plastic shell off the Belkin case and it fit over the Diztronic TPU case with little force and its like a makeshift Otterbox Commuter.
REDFOCZ said:
I got this case off eBay, just received it yesterday. For a case being under $10 its not bad and I feel it will protect it from a mild drop just fine. Also the silicone on the front has a raised lip so if you set the phone face down its not on the screen. The only real down side is that the case covers the power button so no notification light now.
I'll add pictures of mine, since its blue might be easier to see then the black case.
View attachment 1641419
View attachment 1641420
Sent From My LG Optimus
Click to expand...
Click to collapse
I just replaced mine with the Fusion Hybrid, I like it much better...
After only like 2 weeks, the "silicone" was stretching. It's actually more like a molded foam, and the plastic hard shell only holds it to the phone in a few areas. The plastic shell on the Fusion Hybrid actually seems to be a lot more stiff and holds it on three sides. The silicone feels a lot better on the new case as well, seems more dense...
For less than $10, neither is terrible, but I'd spend on the Fusion Hybrid...
I want to buy the white S7. For some reason it was never released in my country (Spain) not sure if it wasn't released in Europe as a whole. I don't know who takes these stupid ass decissions but whatever. The S7 white here is rare, it's more expensive, and I think they will not repair it if it breaks... idiots.
Anyway, so I want to be safe and protect against any scratches etc. How do I protect the phone without making it looking ugly with a goofy ass bulky case?
Gadgetshieldz full body protector. It's a wet installation and makes your phone have a naked look yet gives superb grip and scratch protection. Very satisfied with it. Using for past 3 months. Wish I had bought it sooner.
As replied above GS is the only alternative as of now. Just two things- their support sucks and keep your installed protector clean otherwise it will come off.
Well I realized GS will not help if my phone falls.
I think I may buy this one for the S7:
https://www.youtube.com/watch?v=jCHRKdMEoF0
You don't even need a screen protector unless you are walking in a rocky surface or something which I will not be doing. I have NEVER droped my formed phones and if I ever drop it it will be the casual slip from the hand of a 5'9'' guy so not that much of a fall, looks like Rhinoshield is the best and they got a white one so it will look nice on my white S7.
The only critiques i've read is that the volume and home buttons become a bit stiff... not a problem, I don't need to constantly press the side buttons. I unlock the phone with the fingerprint so who cares about side home button. The volume buttons are also always set to the same and I barely touch that.
i can highly recommend ringke slim s7 (frost grey). Solid protection, very slim and it looks very elegant
Samsung official clear case
xxnurrexx said:
i can highly recommend ringke slim s7 (frost grey). Solid protection, very slim and it looks very elegant
Click to expand...
Click to collapse
Just bought the ringke slim aswell, and it sits nice in your hand and doesn't add too much to the overall size of the phone. Its a real pain to install a screen protector film on this phone because of the arched corners though! :cyclops:
Hi all,
As most of you know, I've been testing out every case I can get my hands on. It's been more difficult this year, there doesn't seem to be as much choice and companies such as Spigen have really dragged their heels on getting cases out for this community. Here it is, my top 5 cases out at the moment which will do you proud.
1. Orzly Fusion Bumper
This case I've only had for a week or so and it's already risen to the top of my list. It's absolutely my favourite and I'll tell you why:
- Protects the case well.
- Adds extra grip to the phone.
- Combo's well with your favourite skin manufacturer (Xtreme, dBrand, Slick etc..)
Overall it's the best all round case, it's nowhere near as expensive as the official OnePlus stuff and it's my daily driver on the OnePlus 5.
2. Tudia OMNIX
Another latecomer to the party (in fact I've only just published the video on this one) but a fairly decent one. This case is my "if I'm going on a messy night out case."
What I mean by that, is that it provides excellent all round protection without completely compromising the use of the phone (like a flip case) It has a built in screen protector, which if used for longer stretches could get annoying and has port covers which makes the phone better protected against those accidental drops in beer.
3. Orzly Slim Stand Case
I'm rewarding Orzly here because of all the case manufacturers they seem to be the one taking risks on the OnePlus 5. Not only have they changed up their, FlexiCase, Wallet & Fusion designs they've produced an entirely new case for the OnePlus this year with the Slim Stand case.
The Slim Stand case make's it onto the list because it's not a case that I thought I'd like much when I saw it on Amazon. I ordered it, just so I could do a review and then probably stick it back in it's box. However to my surprise I've really enjoyed using this case. It's given me the functionality of a more traditional flip case, without the annoying "flip" element.
It feels really premium in the hand and uses the phones beauty and elegance to it's advantage. It's also a really handy case for those of you still playing Pokemon Go as you can use the stand to rest your finger through when you're out walking!
4. Spigen Rugged Armor
Spigen make it onto the list, even though they're main cases are still slated for release in September. Months after the phone was released! Imagine how much further they'd be up if they'd put some effort in!
Those of you which have had the Rugged Armor in the past know what to expect. It's premium at a reasonable price and it'll do what it says on the packaging, which is add extra grip and impact protection. It help's that it looks pretty nice also!
It can be said that you could probably get the Orzly FlexiCase for a little cheaper if you wanted to save some pennies.
5. OnePlus Silicone Red Case
I initially loved this case, but my love waned the longer I had it on the phone. This is very much a "showpiece" case with little utility, but if you've been racking up those referral points, already purchased the backpack then this would be my next choice. It feels super on the phone, adds some welcome colour- just don't leave it on for too long or it'll start to fade and feel tacky!
Thanks,
Let me know if you have any questions!
Jono
No mention of the Otterbox?
djsubterrain said:
No mention of the Otterbox?
Click to expand...
Click to collapse
I'm trying to take into consideration cost vs effectiveness. At least for me, the Otterbox is far too expensive to make it worth purchasing over any of these cases!
Do you feel the ring on the back of the Orzly Slim Stand Case, prevents you from laying the phone down screen side up because it would make the phone 'uneven'?
I really don't like laying my phone down facedown. Seems counterintuitive in my head if I'm trying to protect the screen from scratches.
Also, does the ring on the back keep the phone from sliding in and out of your pocket smoothly?
^That first point is what stopped me from continuing to use my Spigen Style ring.
Sent from my ONEPLUS A5000 using Tapatalk
Where is Ringke Fusion?
Sent from my Nexus 6P using XDA-Developers Legacy app
The rhino is definitely one to be on the list.
I have 4 no. ?
Where is the nillkin frosted shield?
Bought Orzly Fusion Bumper thanks to your thread and I love it.
Going to try this from supcase OnePlus 5 Unicorn Beetle Pro Full-Body Rugged Holster Case -Black
With a build in screen protector and hoping that this works for me.
Here is a YouTube review
Any thoughts on ringke fusion..? Looks vfm to me..itnseems very close to spigen hybrid..
Hey everyone,
Since I typically use a flip case (a regular case with a protective cover for the screen that flips open) with all the phones I've owned, I thought I'd open a thread to start a discussion about people's experiences and recommendations with flip cases for the 6T.
Share something and help someone with what product to use!
Reserved
I'm currently using this one:
Foluu Compatible OnePlus 6T Case,... https://www.amazon.com/dp/B07K2S5DFC?ref=yo_pop_ma_swf
Pros:
+ magnetic edge on flip cover afixes the flip cover to the back, neatly preventing flapping
+ the sides of the phone are completely covered by a transparent bumper, with cutouts only for usb, alert slider, and speakers
+ relatively screen protector friendly
Cons:
- not a smart cover
- back cover is not a single piece with the sides, adding to bulk
Again, the pro/con list reflects my personal preferences and of course, may not apply at all to you.
Orzly Wallet Flip Case looks decent enough. I am currently using the oneplus 6t flip case with card slot, and its okay. Doesnt flap much, but it does not compare to my last otterbox strada case for the iphone 8 plus. Still looking for something similar.
I've also purchased some ringke 3m card slots, both the plastic and the nylon to add to the tpu cover that was included with the phone. Although not a flipcase, the downside with not having a solid magnet or full edge protection gives higher probability of the phone landing face down when dropped.
Exholeus said:
Orzly Wallet Flip Case looks decent enough. I am currently using the oneplus 6t flip case with card slot, and its okay. Doesnt flap much, but it does not compare to my last otterbox strada case for the iphone 8 plus. Still looking for something similar.
I've also purchased some ringke 3m card slots, both the plastic and the nylon to add to the tpu cover that was included with the phone. Although not a flipcase, the downside with not having a solid magnet or full edge protection gives higher probability of the phone landing face down when dropped.
Click to expand...
Click to collapse
I second the motion -- the Otterbox Strada on my Samsung S7 Edge is the gold standard for me. Most expensive case I've bought but has lasted many multiples longer than any other case. It's still a tank and still in use nearly three years later.
Closest case for OnePlus to that standard was the Tech21 flip case for my 6. Don't think they make it for the 6T though.
I'm using the flip case that I got from OnePlus when it's working fine.I've had better and I've had worse but pretty good I'm happy. No issues,, thinking about getting a OtterBox when they come out just for safety. But they're so big and bulky and ugly.,,,,,,,, I guess we'll see
I like cases.
My wife thinks that I have a fetish for phone cases.
I change them when I go out depending on what I feel like.
Here are the flip cases that I have purchased so far;
https://www.ebay.ca/itm/For-OnePlus...var=472229251615&_trksid=p2060353.m2749.l2649
The traditional brown leather flip case.
https://www.ebay.ca/itm/For-OnePlus...var=591631248320&_trksid=p2060353.m2749.l2649
Dr. Who TARDIS because....every phone needs to be inside a Tardis...
https://www.ebay.ca/itm/For-OnePlus...var=572979395291&_trksid=p2060353.m2749.l2649
Blue leather scroll work for when I'm feeling like Jazz.
https://www.ebay.ca/itm/PIN-1-Art-C...var=472327549790&_trksid=p2060353.m2749.l2649
Old School fun right here... I have purchased so many freaking cassettes over the years.. ugh. Why not put my phone in one...
I chose the white and green tape.
https://ca.mobilefun.com/olixar-xtome-leather-style-oneplus-6t-book-case-brown-70015
Old brown leather bound book.
I think that this book one will be my favorite flip case.
Only the Cassette tape case has come in so far.
It's a bit larger then a real cassette tape and it's a big large for the phone.
Then I've purchased another half dozen or so hard cover cases/non flip.
geeksquad2 said:
I like cases.
My wife thinks that I have a fetish for phone cases.
I change them when I go out depending on what I feel like.
Here are the flip cases that I have purchased so far;
https://www.ebay.ca/itm/For-OnePlus...var=472229251615&_trksid=p2060353.m2749.l2649
The traditional brown leather flip case.
https://www.ebay.ca/itm/For-OnePlus...var=591631248320&_trksid=p2060353.m2749.l2649
Dr. Who TARDIS because....every phone needs to be inside a Tardis...
https://www.ebay.ca/itm/For-OnePlus...var=572979395291&_trksid=p2060353.m2749.l2649
Blue leather scroll work for when I'm feeling like Jazz.
https://www.ebay.ca/itm/PIN-1-Art-C...var=472327549790&_trksid=p2060353.m2749.l2649
Old School fun right here... I have purchased so many freaking cassettes over the years.. ugh. Why not put my phone in one...
I chose the white and green tape.
https://ca.mobilefun.com/olixar-xtome-leather-style-oneplus-6t-book-case-brown-70015
Old brown leather bound book.
I think that this book one will be my favorite flip case.
Only the Cassette tape case has come in so far.
It's a bit larger then a real cassette tape and it's a big large for the phone.
Then I've purchased another half dozen or so hard cover cases/non flip.
Click to expand...
Click to collapse
Damn, your wife's probably right..!
But it could be worse: you could have a phone fetish instead of a phone case fetish, and that would be much more expensive.
The flip cases that I have ordered so far have come in.
Also, two of the hard cases have arrived as well. (As an aside, I don't like any of those yet. We will see if the rest of the hard cases are any better)
I like the oneplus oem flip case because it is the only one that has a magnetic feature that turns the screen on and off.
That is nice.
But I find it too small and it doesn't offer much protection.
And it only has one debit card slot.
Not useful as a wallet.
The oneplus, cassette tape and book flip cases do not have a magnetic clasp to keep them closed.
I kind of like that feature.
It gives me a fidget to play with.
And it makes it more noticeable if someone opens the case to take my debit card? Dunno.
Lol
Taking a look at the back side of these cases, some of them are not like the others.
Some of the cutouts look off.
I haven't checked them to see if it affects function or not.
Honestly I don't use the camera much anyways.
If anyone has any questions about these cases, let me know and I will do my best to answer them.
If anyone has a suggestion of another flip case for me to try out, then I am all ears!
P.S. And yes. The book is my favorite case so far. Followed by the Tardis.
Hi, I am looking for the same, but it is so hard... I know exactly what I want but all of the good looking cases are plastic inside and all the silicone ones are not-so-good looking.
Anyone found so far a sleek and elegand flip case with silicone inside?