I've been trying to get viper working on alliance rom and have had nothing but issues. It keeps telling me after I install the drivers and reboot the phone, that the drivers still need to be installed. I used the viper4android.zip so it was installed as a system app. Just don't know what the problem may be. Any help is greatly appreciated.
Sent from my SM-G900T using XDA-FORUM, powered by appyet.com
I am on Alliance ROM, too and it's working for me, man. I didn't set it as a system app. Just installed it like a normal app. I've had better LSOUND QUALITY not disabling LPA WHEN IT ASKS IF YOU WANT TO.
I have tried as both a system and user application with no luck.
Sent from my SM-G900T using XDA-FORUM, powered by appyet.com
I've fixed the build prop. Installed first as system app and kept getting that the driver needed to be installed. So i trues as a user app and still am in the driver loop.
Sent from my SM-G900T using XDA-FORUM, powered by appyet.com
tha23kidd said:
I've fixed the build prop. Installed first as system app and kept getting that the driver needed to be installed. So i trues as a user app and still am in the driver loop.
Sent from my SM-G900T using XDA-FORUM, powered by appyet.com
Click to expand...
Click to collapse
Yeah, I've been trying to get it to work on the AllianceROM as well. Once in a blue moon it would work. I turn check "Enable" and if I hear that it didn't turn on (I already have my settings set up), then I uncheck it, close the app, and open it again and start the whole process. SOMETIMES this works, and SOMETIMES it doesn't.
Leelouster said:
Yeah, I've been trying to get it to work on the AllianceROM as well. Once in a blue moon it would work. I turn check "Enable" and if I hear that it didn't turn on (I already have my settings set up), then I uncheck it, close the app, and open it again and start the whole process. SOMETIMES this works, and SOMETIMES it doesn't.
Click to expand...
Click to collapse
yeah its a pain I've tried everything I can think of and I've been rooting phones and playing with installing system apps user software and all that since like 07 when i got my Motorola Droid the first one from Verizon. This shouldn't be this hard I'm hoping if we request it enough he'll add it to the next version. You should request it be added I will as well.
tha23kidd said:
yeah its a pain I've tried everything I can think of and I've been rooting phones and playing with installing system apps user software and all that since like 07 when i got my Motorola Droid the first one from Verizon. This shouldn't be this hard I'm hoping if we request it enough he'll add it to the next version. You should request it be added I will as well.
Click to expand...
Click to collapse
Same here man, same here. :/ This should be something simple but it's not. I want it to work with the stock music player instead of having to install another one, cause some say it works with the stock music player, and for others, it says it doesn't work and they had to install another player. This is an annoying issue lol, I'll for sure request it. It'll make the ROM even better.
Try enabling full content logging for SuperSU to see if Viper4Android is encountering any errors. I have Viper running perfectly on my S5 on a Stock Based self made ROM.
Viper was a serious pain to setup on Custom ROMs with this phone..i finally got it by being persistent and not giving up..just kept starting from scratch and finally got it..Thing was after getting it running...i personally thought my music sounded better without it..so i took it off..but I probably didn't know what I was doing and didn't have it set correctly. .
Its All personal preference. .
Sent from my SM-G900T using XDA Premium 4 mobile app
hutson23 said:
Viper was a serious pain to setup on Custom ROMs with this phone..i finally got it by being persistent and not giving up..just kept starting from scratch and finally got it..Thing was after getting it running...i personally thought my music sounded better without it..so i took it off..but I probably didn't know what I was doing and didn't have it set correctly. .
Its All personal preference. .
Sent from my SM-G900T using XDA Premium 4 mobile app
Click to expand...
Click to collapse
"thought my music sounded better without it" lol sorry but i MUST laugh at that. You are right in saying you didn't know what you were doing. Viper4Android is the best thing an audiophile could do to their phone
In terms of setting it up, its quite simple. Ensure busybox is installed (a real, well built custom ROM has this already) and you simply run the app and it does everything for you.
Honestly I never got it to work on anything other than poweramp and YouTube app
Sent from my SM-G900T using XDA Free mobile app
I
elesbb said:
"thought my music sounded better without it" lol sorry but i MUST laugh at that. You are right in saying you didn't know what you were doing. Viper4Android is the best thing an audiophile could do to their phone
In terms of setting it up, its quite simple. Ensure busybox is installed (a real, well built custom ROM has this already) and you simply run the app and it does everything for you.
Click to expand...
Click to collapse
Well as I said..i doubt I had all the settings set correctly for optimum listening..nor did I care to take the time to fine tune them or read through the 100 's of posts within its thread to learn. There must be something more to it than what I heard because of all the people that swear by it like you..i am not putting it down..I was just saying I have no problems listening to my music without it and it sound great to me.
But for you say all you have to do is install the app and go is not true for all as I have experienced going through the install process. Maybe for you it installed so easy but not for me or for a lot of people I have seen make comments in this forum and even on the Viper thread itself..I quess your just the Viper genius.
Atleast I made you laugh.
Sent from my SM-G900T using XDA Premium 4 mobile app
tha23kidd said:
I've been trying to get viper working on alliance rom and have had nothing but issues. It keeps telling me after I install the drivers and reboot the phone, that the drivers still need to be installed. I used the viper4android.zip so it was installed as a system app. Just don't know what the problem may be. Any help is greatly appreciated.
Sent from my SM-G900T using XDA-FORUM, powered by appyet.com
Click to expand...
Click to collapse
Did you get it working ? Im on the latest alliance and it installed flawlessly ..
---------- Post added at 10:08 PM ---------- Previous post was at 10:03 PM ----------
hutson23 said:
I
Well as I said..i doubt I had all the settings set correctly for optimum listening..nor did I care to take the time to fine tune them or read through the 100 's of posts within its thread to learn. There must be something more to it than what I heard because of all the people that swear by it like you..i am not putting it down..I was just saying I have no problems listening to my music without it and it sound great to me.
But for you say all you have to do is install the app and go is not true for all as I have experienced going through the install process. Maybe for you it installed so easy but not for me or for a lot of people I have seen make comments in this forum and even on the Viper thread itself..I quess your just the Viper genius.
Atleast I made you laugh.
Sent from my SM-G900T using XDA Premium 4 mobile app
Click to expand...
Click to collapse
After you install viper did you install drivers then after that diable LPA and then reboot ...? And yes there is a huge difference as far as how loud and clear it is . If you set it up properly and take the time to toggle settings to your preference you will never go without it again .If you listen to music at very low volumes and aren't that into sound quality then don't use it but youre missing out.
What is not working for you .. Did you go to settings then sound and set viper as your music effect as default?
It's strange...on my One and N5 it only works in the google play music app. On this phone it works on every app that outputs sound. This is amazing lol. You have no idea how happy I am to finally listen to my music in decent quality.
Sent from my SM-G900T using Tapatalk
spirodave said:
Did you get it working ? Im on the latest alliance and it installed flawlessly ..
---------- Post added at 10:08 PM ---------- Previous post was at 10:03 PM ----------
After you install viper did you install drivers then after that diable LPA and then reboot ...? And yes there is a huge difference as far as how loud and clear it is . If you set it up properly and take the time to toggle settings to your preference you will never go without it again .If you listen to music at very low volumes and aren't that into sound quality then don't use it but youre missing out.
What is not working for you .. Did you go to settings then sound and set viper as your music effect as default?
Click to expand...
Click to collapse
I will give it another shot and see if I can make it sound better..
hutson23 said:
I will give it another shot and see if I can make it sound better..
Click to expand...
Click to collapse
It's worth a shot. Especially if you use headphones alot. I personally think that stock sounds ok at best. It's not loud enough and you don't have high quality sound drivers. Make sure it's allowed in super user also. That could be your issue. Don't listen to any of the ass hole comments on here. Some people forget they were noobs once and that they didn't always know everything
spirodave said:
It's worth a shot. Especially if you use headphones alot. I personally think that stock sounds ok at best. It's not loud enough and you don't have high quality sound drivers. Make sure it's allowed in super user also. That could be your issue. Don't listen to any of the ass hole comments on here. Some people forget they were noobs once and that they didn't always know everything
Click to expand...
Click to collapse
Thanks to @spirodave I have given this another shot..and I must say I was very wrong... at first I was just randomly selecting different features not understanding what each one did..and then I found the profile thread for Viper.I must say after using a few different ones I found one my ear really likes and you guys were right my music sounds freaking awesome..so thanks again and here is the link to the Viper profiles thread..maybe it can help someone else find there right setup.
http://forum.xda-developers.com/showthread.php?t=2324454
Sent from my SM-G900T using XDA Premium 4 mobile app
hutson23 said:
Thanks to @spirodave I have given this another shot..and I must say I was very wrong... at first I was just randomly selecting different features not understanding what each one did..and then I found the profile thread for Viper.I must say after using a few different ones I found one my ear really likes and you guys were right my music sounds freaking awesome..so thanks again and here is the link to the Viper profiles thread..maybe it can help someone else find there right setup.
http://forum.xda-developers.com/showthread.php?t=2324454
Sent from my SM-G900T using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Glad you got it working. On top of viper I always and I mean always use a volume increase mod. That along with viper makes it not only louder but really brings out viper. . My $14 skull candy ear buds sound Frick in amazing. I'll never buy beats. I don't know why Samsung and other brands don't incorporate better sound into their firmware. I guess they don't want to be held responsible for someones ear drums exploding lol.
Try pon-3. It is a modified version of the latest v4a + sound mod (libs) enhancement.
Leelouster said:
Yeah, I've been trying to get it to work on the AllianceROM as well. Once in a blue moon it would work. I turn check "Enable" and if I hear that it didn't turn on (I already have my settings set up), then I uncheck it, close the app, and open it again and start the whole process. SOMETIMES this works, and SOMETIMES it doesn't.
Click to expand...
Click to collapse
Im on alliance b3 and using Viper with no issues at all . I installed the apk and installed the driver and rebooted .. Make sure to go to settings then sound and change Music effects under advanced to viper
Related
Can't seem to figure this out. I liked the GB better
Sent from my SAMSUNG-SGH-I717 using xda premium
Thats an "EXCELLENT" question....
And the app developer needs to answer it...
As of august 14th, the app has no official feature to delete tracks. It's insane..IMHO
And I dumped apollo for N7.
I also use poweramp on occasion....g
Hll
gregsarg said:
Thats an "EXCELLENT" question....
And the app developer needs to answer it...
As of august 14th, the app has no official feature to delete tracks. It's insane..IMHO
And I dumped apollo for N7.
I also use poweramp on occasion....g
Click to expand...
Click to collapse
I'm currently running gubment cheeze. The Apollo player has no way to delete music? That's retarded. Can I delete Apollo altogether and put a market app instead. I'd sure hate to change roms just on account of that.
Yes....dump it for another app....g
Nd
gregsarg said:
Yes....dump it for another app....g
Click to expand...
Click to collapse
Do u have a recommendation? Ans u can only disable Apollo. Not delete it. So just shy of changing roms,is there a how to?
harley1rocker said:
Nd
Do u have a recommendation? Ans u can only disable Apollo. Not delete it. So just shy of changing roms,is there a how to?
Click to expand...
Click to collapse
The pro version of titanium backup will allow you to remove the protected system apps....apollo included. And you can also download the CM rom to PC, and use winrar to strip out the apps prior to flashing, as winrar will keep the signing verification intact, allowing the flash to occur without them.
I've used this technique for a long time also, and it works very well. I hate bloat, and have reduced CM7 and CM9 roms down to roughly 100 megs before...
Lets just say, they fly....LOL
and I've used poweramp for months now, but there are many others to choose from. you'll just have to test various apps, and settle on your favorite....g
Best bet is to use es file explorer or whatever and drop it from there...make playlists if you just don't wanna hear it at that point and time...that's what I do
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Still having Apollo issues!
harley1rocker said:
Can't seem to figure this out. I liked the GB better
Click to expand...
Click to collapse
I had problems with Apollo since day 1. Since I had a lot of music I didn't want to have to design custom playlists just to remove a few songs.
Things got MUCH worse when apollo somehow scanned and auto added all the CM sounds and ringtones into the mix. It also added a new Euro internet radio channel so random really means random! That was the last straw with no way to remove those from the library I had to move. I am going to try out N7 or PowerAmp.
Pretty big flaw Apollo!
Jet Audio is the best player out now. IMHO...
Does anyone know where I can find the latest version of Music Junk? Mine just keeps saying "Network Error" and all the searches I have done are really old posts. Can someone help me please???
Looks like it might be gone for good since the Facebook and Twitter page has been pulled....
I've been wondering the same, but I guess it really is finally gone for good... which blows because it was the best app for downloading music, hands down.
After posting my last, I installed Music Junk 4.3 on my phone again and opened it immediately to try it out again. I searched for music and it actually worked. I downloaded a couple of songs and everything, but then it stopped working after trying another search. Not sure what this means, but hopefully something positive...
Can you post a link for 4.3? I couldn't find it anywhere. I found other versions, but not that one. Pretty Please?
I have this problem with 4.3 I also tried to uninstall & reinstall. I tried 4.2 as well with no luck. This is typical of them when they change versions, but I haven't seen a 4.4 version out there...
*thread subscribed to in hopes of a solution*
Cranemachine said:
Can you post a link for 4.3? I couldn't find it anywhere. I found other versions, but not that one. Pretty Please?
Click to expand...
Click to collapse
Luckily, I still had this saved on my computer from when I downloaded it off the Twitter page...
http://db.tt/8T5p0jZN
tyler.durden said:
Luckily, I still had this saved on my computer from when I downloaded it off the Twitter page...
Click to expand...
Click to collapse
But the more important question is are you getting 4.3 to work? Seems like most of us are getting "network error" on any searches.
I have a 4.3, but it's not like it's doing me any good.
trayson said:
But the more important question is are you getting 4.3 to work? Seems like most of us are getting "network error" on any searches.
I have a 4.3, but it's not like it's doing me any good.
Click to expand...
Click to collapse
I did last night, randomly... decided to install it again and try it. The first search worked and I was able to download several songs. After that, no such luck. I've been getting network error ever since.
I remember long time back (HTC hero days) music junk used to have some files, that used to pull data from these music websites, that used to get outdated. hence, the new versions would have the new files and we would not get the network errors...
If we can get a developer to look into some recent music junk versions and look into the changes made, we might be able to get it working again.
nubie said:
I remember long time back (HTC hero days) music junk used to have some files, that used to pull data from these music websites, that used to get outdated. hence, the new versions would have the new files and we would not get the network errors...
If we can get a developer to look into some recent music junk versions and look into the changes made, we might be able to get it working again.
Click to expand...
Click to collapse
I use rolle you tube which works great for downloading MP3s of videos or songs on you tube.
Sent from my EVO using xda app-developers app
waterbound said:
I use rolle you tube which works great for downloading MP3s of videos or songs on you tube.
Sent from my EVO using xda app-developers app
Click to expand...
Click to collapse
The thing is that music junk was the only app that showed the bitrate of each song. And it worked! The quality of songs was amazing.
The thing is that there is a very easy fix for this Network error... We just need a developer to look into it.
Sent from my PG86100 using XDA Premium App
nubie said:
The thing is that music junk was the only app that showed the bitrate of each song. And it worked! The quality of songs was amazing.
The thing is that there is a very easy fix for this Network error... We just need a developer to look into it.
Sent from my PG86100 using XDA Premium App
Click to expand...
Click to collapse
I agree, with Rolle you are at the mercy of whatever is available bit rate wise. I have had good results so far, sometimes CD 44.1 quality or near, sometimes its complete crap. Just throwing out there for a suggestion to hold you over! I agree and hope a developer can modify music junk as necessary.
Sent from my EVO using xda app-developers app
My worst nightmares have come true. Music junk hands down the best music app without an overly stupid gui, has bitrate info, and the largest music selection.
I'm seriously debating getting back into java programming to make it work again... but soo much work
Samsung Galaxy S3 // tapatalk
Anybody know of an alternative method of downloading free music, I haven't paid for music in three years thanks to music junk.
jeffyh said:
My worst nightmares have come true. Music junk hands down the best music app without an overly stupid gui, has bitrate info, and the largest music selection.
I'm seriously debating getting back into java programming to make it work again... but soo much work
Samsung Galaxy S3 // tapatalk
Click to expand...
Click to collapse
I'm sure, that if you start programming, you can definitely get donations! It might be worth your time
Sent from my PG86100 using XDA Premium App
Any developments?
doneski
I think it's a done deal, guys. Anytime the servers went offline & we waited on a new version,I was still able to download on mj ver3.0.that is the only version that would work all the time even when the newer current ones would come network error. Needless to say, 3 isn't working anymore.
No way 4.3 was working for me this month now i get network error why i love this app. Any one know if there is an update like 4.4 or am alternative app out there?
I'm using v 3.0.4, sometimes it works and sometimes it doesn't. The trick is i have to press search a few times, i get the "network error'' the first tries but eventually it loads the search page. I get the error far more times when im using the network than through wi fi. But once it goes through i click on the song and downloads on the first try.
Just wanted to post that I have installed Viper4Android and it works beautifully on my rooted S5. This app is the #1 reason I root.
This app will change the way you think about sound (seriously). Every time I demo the difference to someone by turning it on and off they immediately ask me to install it for them.
Installed using directions by @docnok63, paraphrased below for your convenience. I have only tested this app on my rooted T-mobile S5, and only with spotify (it's the only player I use). Of course you should always backup first and only you are responsible for what you do to your device.
1. Ensure you are rooted. From this point on, grant all superuser requests.
2. Download ViPER4Android FX. Get the latest version under the "Android FX" heading.
3. Extract the 4.x .apk from the zip. If you haven't already, smart-install Busybox from the play store.
4. Move the 4.x .apk to root system/app using a root-friendly file browser of your choice. Reboot to reset permissions.
5. Launch the app (from your app drawer). Grant root to let it install drivers. I've always gone with super audio quality; I suppose it's up to you. It may ask you if it can modify some files to disable power saving...just let it happen. :good: Reboot again.
6. Go straight to settings/sound/music effects (at the bottom) and toggle Viper4Android as default.
7. Open root system/build.prop using a file explorer and text editor with root access. You change three lines of code as follows. Some may already have been changed.
Code:
Ipa.decode=true should read Ipa.decode=false
tunnel.decode=true to tunnel.decode=false
lpa.use-stagefright=true to lpa.use-stagefright=false
8. Save the file and reboot once more. Open the Viper4Android app and have at the sound settings; play around until you find what works for you (just make sure to check "Enable" :highfive. You can edit the settings as you have music playing. When you get it where you want it, toggle the enable button and see how far you've come.
You can explore the main app thread here for some ideas on customization.
All credit due to @viper520, @zhuhang, and @docnok63.
All I did was paraphrase. Hope this helps someone!
Mine still doesn't work D: followed these instructions exact I'm not sure where I'm going wrong.
EDIT: Does work, just doesn't work in the default Samsung galaxy music app.
Carlislee said:
Mine still doesn't work D: followed these instructions exact I'm not sure where I'm going wrong.
EDIT: Does work, just doesn't work in the default Samsung galaxy music app.
Click to expand...
Click to collapse
I have not been able to get this to work with the stock app on any version of KK but it works fine with Poweramp. Just have all EQ and processors in Poweramp turned off and in Poweramp settings/audio/advanced tweaks make sure everything is unchecked.
MikeyLee said:
I have not been able to get this to work with the stock app on any version of KK but it works fine with Poweramp. Just have all EQ and processors in Poweramp turned off and in Poweramp settings/audio/advanced tweaks make sure everything is unchecked.
Click to expand...
Click to collapse
WOW...it works here for me. At first it didn't. I looked for updates and it offered v2.3.3.0 Installed that and it's really noticeable with my ear buds. This is with Google music player. I have PowerAmp premium too. Have not tested on that but it for sure works with the latest APK I referenced and it is installed as a system app. One of those build.prop edits was already set while the other two needed to be changed, just an FYI. If you aren't on the latest APK, update. I am on the latest update of Alliance ROM here on my T Mobile S5 variant....fyi.
Hi guys can someone tell me what to do if i cant find the build.prop stated above on my device?
do i have to make the new one or to leave it as it be?
since i dont feel any difference and when i change the preset i dont feel any changes so please help me i would be very gratefull thx a lot
Nice one. Was just trying to get cyanide dsp working, was getting frustrated and then saw this... fantastic sound!
Cheers mate!
Sent from my SM-G900F using xda app-developers app
theoryzz said:
Hi guys can someone tell me what to do if i cant find the build.prop stated above on my device?
do i have to make the new one or to leave it as it be?
since i dont feel any difference and when i change the preset i dont feel any changes so please help me i would be very gratefull thx a lot
Click to expand...
Click to collapse
It's in system folder. You need to use an appropriate method of editing that allows you to change from read only to read write. Also for me you have to be running 2.3.3.0 version of Viper. And finally, at least for me, I set this up and it runs until I also use the app Poweramp. Seems as soon as I use PowerAmp with the equalizer on, it breaks the functionality within 2 seconds of starting any song. If you use the menu function while running the Viper app, look at driver staus which not only shows the version but if you are running a song it will say yes to processing which verifies the app is running. (build prop editor by JRummy Apps in Playstore is free and works great) (Of course Root Explorer is my all time favorite, paid app that has a ton of functions, including editing)
So it didn't work for me, unless deleted the mod and installed everything from scratch as a normal app instead of a system one. To make it work with Poweramp, had to enable " compatible mode", add "music fx" button to "tone/vol" screen and turn it on. Now it works.
Anyone here having trouble with signal after flashing this mod?
Or is it just me
Sent from my SM-G900H using xda premium
Awesome! Trying this out soon.
Here the sound is much better.
However commands double and triple clicks in the headset no longer work with the Power Amp.
This happened to anyone else?
what settings are everyone using? I dont know what to mess with
Guitarfreak26 said:
what settings are everyone using? I dont know what to mess with
Click to expand...
Click to collapse
Headset enabled:
V4A FX, Playback AGC, ViperBass, ViperClarity.
Do you use any custom irs? Or Profiles?
Sent from my SM-G900F using Tapatalk
Guitarfreak26 said:
Do you use any custom irs? Or Profiles?
Sent from my SM-G900F using Tapatalk
Click to expand...
Click to collapse
G900H rooted.
jmaxyyz said:
G900H rooted.
Click to expand...
Click to collapse
lol)
Gassity said:
lol)
Click to expand...
Click to collapse
Cada zé mané que me aparece...
Sorry for my poor english. What I meant is that my S5 was only rooted and the rest is all as it came from the factory.
But after a while the controls on the headset started to function normally. Thank you.
thanks, what a difference...waow !!
No one get music stuttering when screen off???
Its very annoying.
Hey, I can't get it to stick. It keeps asking to install the driver. My rom is "Project Infinity". I tried to move it to system/app but it says it's read only. I have busy bus installed. I don't know what to do, can someone please help me?
Disclaimer: I will take no responsibility if flashing this zip somehow causes you to go deaf, hurts your cat, noise complaints from your neighbors, anti-social behavior, getting hit by a bus, your grandmother begins twerking, broken windows and/or any other imaginable royally screwed possibility.
Q&A: Yes, the Hi-Fi Quad Dac functions with ViPER4Android.
Credits: @zhuhang for ViPER4Android FX/XHiFI, and @jcadduono for working out the root shell exploit and hooking us up with TWRP.
Features: Systemwide ViPER4Android FX 2.3.4.0 (higher audio processing) and ViPER4Android XHiFi.
Installation steps:
1) Make sure you're rooted and have TWRP installed.
2) Install BusyBox, preferably to /system/xbin (otherwise XHiFi will not work, only FX will).
3) Navigate to /vendor/etc (/system/vendor/etc) and delete audio_effects.conf. ZIP has been updated to delete the file.
4) Flash the attached zip.
5) Ignore the version typo while flashing the provided zip. ZIP has been updated to correct this.
6) Ignore the the su binary warning in XHiFi.
7) Optional: Active High Impedance mode by following my guide in the Guides, News & Discussion forum. // http://forum.xda-developers.com/v20/how-to/guide-impedance-mode-activation-t3507227
8) Profit???
Any chance we can get a flashable ARISE zip or a test try from someone willing to try it? If Viper4Android works, and functions 100%, then chances are we can probably use ARISE. Would love to get a definitive on this subnect either way.
I would like for divine to work.
Just need beats and dolby and z
Xposed.
Sent from my PixelXL using Tapatalk
533y4 said:
Any chance we can get a flashable ARISE zip or a test try from someone willing to try it? If Viper4Android works, and functions 100%, then chances are we can probably use ARISE. Would love to get a definitive on this subnect either way.
Click to expand...
Click to collapse
Arise works the only issue I can find is it is not processing over Bluetooth.
The same thing with this ZIP the OP posted... there are new versions that work not this order one that is not supported anymore
Sent from my Pixel using XDA-Developers mobile app
533y4 said:
Any chance we can get a flashable ARISE zip or a test try from someone willing to try it? If Viper4Android works, and functions 100%, then chances are we can probably use ARISE. Would love to get a definitive on this subnect either way.
Click to expand...
Click to collapse
I flashed ARISE+Sound+Systems+Deuteronomy+2.3.3 and it sounds awesome. Only problem I'm having (haven't tried bluetooth yet) is that it stops processing when I either manually change tracks (doesn't stop when it goes to a song by itself) or when I alternate between players (spotify >usb audioplayer pro or vice versa). I have to toggle master power off/on to restart it.
Wonder what the fix would be for that?
Flashed file in OP+Poweramp Latest Beta. Sounds awesome
Seeing lots of familiar names from Samsung Note threads...good stuff [emoji2]
Sent from my LG-H918 using Tapatalk
tnick84 said:
Seeing lots of familiar names from Samsung Note threads...good stuff [emoji2]
Sent from my LG-H918 using Tapatalk
Click to expand...
Click to collapse
It's the next best phone c'mon lol.
charlieb620 said:
It's the next best phone c'mon lol.
Click to expand...
Click to collapse
True. I've actually grown to like it more...once we get some more devs in here it will damn nice!
Do you know if anyone is working on surround sound mod? I really miss that one. I've tweaked the maixer_path myself but nothing seems to change. Its also my first go with this kinda mod. You have any knowledge in this field?
Sent from my LG-H918 using Tapatalk
tnick84 said:
True. I've actually grown to like it more...once we get some more devs in here it will damn nice!
Do you know if anyone is working on surround sound mod? I really miss that one. I've tweaked the maixer_path myself but nothing seems to change. Its also my first go with this kinda mod. You have any knowledge in this field?
Sent from my LG-H918 using Tapatalk
Click to expand...
Click to collapse
Not that I know of. As far as editing the paths it should be the same plus the DAC lines. I've done it to my Note 7. I'll mess around with it and get back to you.
Anyone have any issues with this one besides bluetooth not working?
I flashed Viper4Arise a few days ago and the processing cuts off and on. When it stops I have to reboot to make it work again.
slayerh4x said:
Anyone have any issues with this one besides bluetooth not working?
I flashed Viper4Arise a few days ago and the processing cuts off and on. When it stops I have to reboot to make it work again.
Click to expand...
Click to collapse
I got Bluetooth working in compatible mode but only Spotify, not USB audioplayerpro, Poweramp, I can't hear any audio. Couldn't get Dolby Atmos to work either on Bluetooth.
vibrantliker said:
I got Bluetooth working in compatible mode but only Spotify, not USB audioplayerpro, Poweramp, I can't hear any audio. Couldn't get Dolby Atmos to work either on Bluetooth.
Click to expand...
Click to collapse
You're on this version now?
slayerh4x said:
You're on this version now?
Click to expand...
Click to collapse
No the Viper4Arise Deuteronomy 2.3.3
vibrantliker said:
No the Viper4Arise Deuteronomy 2.3.3
Click to expand...
Click to collapse
Oh okay. I just did a restore on my phone to a time before I flashed any Viper. I'm going to try this one now and I'll let you know how it goes.
slayerh4x said:
Oh okay. I just did a restore on my phone to a time before I flashed any Viper. I'm going to try this one now and I'll let you know how it goes.
Click to expand...
Click to collapse
Please. Nice to hear restore works! I made a backup pre viper as well.
vibrantliker said:
Please. Nice to hear restore works! I made a backup pre viper as well.
Click to expand...
Click to collapse
Seems to be working much better so far. I skipped songs, unplugged headphones, changed music player and its still processing so far.
slayerh4x said:
Seems to be working much better so far. I skipped songs, unplugged headphones, changed music player and its still processing so far.
Click to expand...
Click to collapse
Which version did you flash, and that's after you restored a backup?
vibrantliker said:
Which version did you flash, and that's after you restored a backup?
Click to expand...
Click to collapse
I restored a backup that didn't have viper and then followed the instructions and flashed zip from OP.
slayerh4x said:
I restored a backup that didn't have viper and then followed the instructions and flashed zip from OP.
Click to expand...
Click to collapse
Sorry, you mean the one in this thread?
Download in Magisk Manager: ViPER4Andriod FX ver. 1.7.4. by: Viper520.
Flash via MagiskManager, then reboot. Working.
Tested it, working on Andriod Pie Oxygen OS Ver. 9.
Build: A6003_22_180915
Is it working after reboot? I've got that version but I need to go to app after every boot and turn it off and on then its working.
a metamodel our for just OnePlus 6 what did u do?
Rather ask, than making fun
Tried it, reboot, as ever not processed. Metamods
I'll bad vote you, for suggest bad to people
---------- Post added at 10:30 PM ---------- Previous post was at 10:25 PM ----------
V4a is sure working
Remove xXx redo .profile no adons good to go
I got a prime as well.. not in any use, I like same headphones
Dioser said:
a metamodel our for just OnePlus 6 what did u do?
Rather ask, than making fun
Tried it, reboot, as ever not processed. Metamods
I'll bad vote you, for suggest bad to people
---------- Post added at 10:30 PM ---------- Previous post was at 10:25 PM ----------
V4a is sure working
Remove xXx redo .profile no adons good to go
I got a prime as well.. not in any use, I like same headphones
Click to expand...
Click to collapse
Eh..what?
Also to OP: why suggest the usage of the v4a that everyone uses in magisk?.. it's the one most of us use anyways and most if not all ROMs use it, it's the go-to systemless v4a...
seems a waste of a thread tbh, but whatever keeps you happy is worthwhile
efinityy said:
Eh..what?
Also to OP: why suggest the usage of the v4a that everyone uses in magisk?.. it's the one most of us use anyways and most if not all ROMs use it, it's the go-to systemless v4a...
seems a waste of a thread tbh, but whatever keeps you happy is worthwhile
Click to expand...
Click to collapse
Eh. Was letting people know that it works. There are several versions on there. Is that a bad thing?
saitek1911 said:
Eh. Was letting people know that it works. There are several versions on there. Is that a bad thing?
Click to expand...
Click to collapse
Ofc not, don't get me wrong, but it is the only updated one on magisk... Maybe it's just me but I've always had this version, across all phones, it's the only one that always support the latest unity... But I guess for ppl that use the system installed driver versions of v4a you gave em a wake-up call to switch over to magisk based v4a!
It's good in a way then I guess, sorry if I came of as mean :angel:
My apologies.
Don't even remember I wrote yesterday, jeez, stupid beers. Hope I did not offend any, if I did, remember, I'm the fool L
efinityy said:
Ofc not, don't get me wrong, but it is the only updated one on magisk... Maybe it's just me but I've always had this version, across all phones, it's the only one that always support the latest unity... But I guess for ppl that use the system installed driver versions of v4a you gave em a wake-up call to switch over to magisk based v4a!
It's good in a way then I guess, sorry if I came of as mean :angel:
Click to expand...
Click to collapse
No worries. Your right though.
But there are still many new comers. Some extra info never hurts.
Viper is a must have for me. Along side with a stock android. Oxygen os is the closest thing.
saitek1911 said:
Download in Magisk Manager: ViPER4Andriod FX ver. 1.7.4. by: Viper520.
Flash via MagiskManager, then reboot. Working.
Tested it, working on Andriod Pie Oxygen OS Ver. 9.
Build: A6003_22_180915
Click to expand...
Click to collapse
I've tried installing this way but there is no app showing up. How is this supposed to work through Magisk? Am on OOS 9 with elementalx kernel fwiw.
Works here....but first times don`t.
Had to get out of the Viper4 until it starts.....
Using it with Poweramp!
F7X said:
I've tried installing this way but there is no app showing up. How is this supposed to work through Magisk? Am on OOS 9 with elementalx kernel fwiw.
Click to expand...
Click to collapse
it works but after some time autimatically stops ..have to reboot ..thats why i downgraded to android o.
Sent from my ONEPLUS A6000 using Tapatalk
Don't reboot. Just toggle on-off, then exit, then re-enter. Works for me to re-enable
I've been on the V4A bandwagon for years now. Was so relieved when someone created Magisk modules for it. I too have issues with it stopping working. What I've found is if you reboot the phone, the first thing you open is V4A. Then open the audio app you want to play. But let's say I switch from Shuttle to Spotify - then V4A stops working. Even if I close everything and open V4A first. A reboot solves it.
Then I have issues when using Bluetooth. Example.. in my car if I have the phone freshly rebooted and V4A open, once it connects to my car V4A processes fine. Turn the car off to pump gas, start the car back up, no V4A. Another reboot. It's super annoying. On my previous phone, what solved this was staying in compatible mode. I've tried everything and I can't get around this. Wish I knew how to fix.
joesee said:
I've been on the V4A bandwagon for years now. Was so relieved when someone created Magisk modules for it. I too have issues with it stopping working. What I've found is if you reboot the phone, the first thing you open is V4A. Then open the audio app you want to play. But let's say I switch from Shuttle to Spotify - then V4A stops working. Even if I close everything and open V4A first. A reboot solves it.
Then I have issues when using Bluetooth. Example.. in my car if I have the phone freshly rebooted and V4A open, once it connects to my car V4A processes fine. Turn the car off to pump gas, start the car back up, no V4A. Another reboot. It's super annoying. On my previous phone, what solved this was staying in compatible mode. I've tried everything and I can't get around this. Wish I knew how to fix.
Click to expand...
Click to collapse
Usually just exit the app and reopen fixes it. I'm not having any issues with it tho. My V4A stays open while listening to music
Hi guys, could anyone explain to me why every time restart the device, viper doesn't work anymore? I installed AML and VIPER 1.8 from magisk .. What am I wrong?
I have oos 9.0.2 and xXx mod
Inviato dal mio ONEPLUS A6003 utilizzando Tapatalk
Amazing profile, makes my $10 Sony headphones sound like they costed $100+
Anyone is having a play store notification for this app? It says that it's not a safe app. I know it's a magisk module, but I've never had a notification about any magisk module in last month's. Does anyone know how to fix it? Thank you!!!
Jack_Sparrow_ said:
Anyone is having a play store notification for this app? It says that it's not a safe app. I know it's a magisk module, but I've never had a notification about any magisk module in last month's. Does anyone know how to fix it? Thank you!!!
Click to expand...
Click to collapse
Yes I have had it also, but only since yesterday. I have disable play protect now. However viper is still not processing.
devtherockstar said:
Yes I have had it also, but only since yesterday. I have disable play protect now. However viper is still not processing.
Click to expand...
Click to collapse
Setting selinux to permissive did the job for me
Everytime I play music on my phone v4a doesn't directly work, I have to open the app hit exit from the 3 dot menu and then open it again for it to work. Is this just how it is? Or can I do something or install something to make it work just all the time?