Hello,
I am trying to flash openrecovery-twrp-2.7.1.0-i9300.tar to my Galaxy S3 i9300 with Odin 3.09
The process seems to complete successfully and Odin shows a [PASS!] but once i reboot in recovery mode TWRP is not there
(i get a "android recovery mode <3e>" screen which i suppose is a vanilla/default recovery mode?).
PS. i have kies3 latest edition installed and windows7 x64 seem to indicate that all phone drivers are installed correctly.
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/003> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse
DarkNik said:
Hello,
I am trying to flash openrecovery-twrp-2.7.1.0-i9300.tar to my Galaxy S3 i9300 with Odin 3.09
The process seems to complete successfully and Odin shows a [PASS!] but once i reboot in recovery mode TWRP is not there
(i get a "android recovery mode <3e>" screen which i suppose is a vanilla/default recovery mode?).
PS. i have kies3 latest edition installed and windows7 x64 seem to indicate that all phone drivers are installed correctly.
Click to expand...
Click to collapse
Try again untick reboot in odin wait until it flashes switch phone off or pull battery and reboot manually Volume up + Home+Power see if that works.
Flash CWM first. After that you can try flash TWRP via odin or via recovery
tallman43 said:
Try again untick reboot in odin wait until it flashes switch phone off or pull battery and reboot manually Volume up + Home+Power see if that works.
Click to expand...
Click to collapse
I tried but even that yielded no results
verny94 said:
Flash CWM first. After that you can try flash TWRP via odin or via recovery
Click to expand...
Click to collapse
I am not familiar with CWM, i will be googling it now and see what i can find in case i need to proceed with it.
I found this CWM bundle that also has a version of odin that reportedly works with my i9300.
MEGA_CO_NZ link -> /#!csdzBRRb!V-ZDrGuVB29Ywq9tdE64BGGJwpNvHFibeS9TQ2y2p1o samsung-galaxy-s3-i9300-touch-cwm-odin.zip
followed the steps but boom even that was to no avail (i also tried to refollow the steps once with the no restart option @tallman43 mentioned.
DarkNik said:
I am not familiar with CWM, i will be googling it now and see what i can find in case i need to proceed with it.
Click to expand...
Click to collapse
A am not fan of CWM also. CWM (or Philz touch) will be only the way how to get TWRP
Related
Hi, could anyone tell me please what i can do with bootlooping S3? It happened on version of CM11 rom, it was workin fine until this one time i plug it to charge it and from then it is just staying on galaxy S3 logo. I can get to download mode and recovery mode but odin wont flash anything and in cwm (touch recovery 6.0.4.4) it says that it cannot mount anything and errors and partition fails.
Otamoe said:
Hi, could anyone tell me please what i can do with bootlooping S3? It happened on version of CM11 rom, it was workin fine until this one time i plug it to charge it and from then it is just staying on galaxy S3 logo. I can get to download mode and recovery mode but odin wont flash anything and in cwm (touch recovery 6.0.4.4) it says that it cannot mount anything and errors and partition fails.
Click to expand...
Click to collapse
First of all READ. As everybody is saying Ok first question, when You go download mode can you see model name - 9300GT ? If so that means everygthing is solveable.
Next you have messed something and You need to step by step check it. If You want to still work on CM11 you need to flash CF-Root-SGS3-v6.4 to make sure that on the level of recovery everything is ok.
http://forum.xda-developers.com/showpost.php?p=27049380&nocache=1&z=1947389626875519
Than try to flash again Your ROM. We will see where this will bring You.
Thx for reply. So i can see model name in download mode GT-9300 and as you said i try to flash that kernel...
odin said:
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> recovery.img
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
When I used to be having such problem I was trying to chaoticlly flash everything. Now I can say that this was stupid. Every sytuation is diffrent but some are simmiliar.
Try this topic at least You will be having stock rom with fully func. S3 If it helps you than you will go with Custom ROM otherwise>>> Root and than ROM.
http://forum.xda-developers.com/showthread.php?t=2563562
If this will not solve the problem we will see other oppurtunities.
I cannot flash anything with odin.. when i try so odin stays forever like this:
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
Hey,
I have a samsung S3, I9300. I used a version of cyangenmod, a lillipop one for a while but I got a lot of troubles with, everytime the phone is down, and crashing. Yesterday, I found it blocked, it doesn't want to go on.
I tried to use Odin to install a new android but I got a problem :
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
I tried many versions of odin, used as administrator and nothing changed.
Please help me, I really need the phone for work tomorrow.
Thank you guys.
Gate11 said:
Hey,
I have a samsung S3, I9300. I used a version of cyangenmod, a lillipop one for a while but I got a lot of troubles with, everytime the phone is down, and crashing. Yesterday, I found it blocked, it doesn't want to go on.
I tried to use Odin to install a new android but I got a problem :
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
I tried many versions of odin, used as administrator and nothing changed.
Please help me, I really need the phone for work tomorrow.
Thank you guys.
Click to expand...
Click to collapse
Download another ROM preferably a KitKat Rom(Your choice). But since ODIN is blocked you'll have to flash it via your custom recovery. If you don't have a custom recovery:
Goto the Playstore
Download "TWRP Manager (ROOT)"
Open app
Grant Permission(on SU)
Select "Device Name"
Find "Samsung Galaxy S3 i9300"
Select "Recovery Version to install"
Select the latest one(The one very first at the top is latest available)
Hit "Install Recovery"
Make sure you have WiFi as it will now start to download the files..
If something like "Ensure the partition...... /dev/block/.." pops up; Hit "YES"
exonerare said:
Download another ROM preferably a KitKat Rom(Your choice). But since ODIN is blocked you'll have to flash it via your custom recovery. If you don't have a custom recovery:
Goto the Playstore
Download "TWRP Manager (ROOT)"
Open app
Grant Permission(on SU)
Select "Device Name"
Find "Samsung Galaxy S3 i9300"
Select "Recovery Version to install"
Select the latest one(The one very first at the top is latest available)
Hit "Install Recovery"
Make sure you have WiFi as it will now start to download the files..
If something like "Ensure the partition...... /dev/block/.." pops up; Hit "YES"
Click to expand...
Click to collapse
The problem is that the phone is blocked, i can't access or turn on. Only Download mode
Gate11 said:
The problem is that the phone is blocked, i can't access or turn on. Only Download mode
Click to expand...
Click to collapse
Sounds like the phone is bricked.
You have to return to stock S3 via download mode and start the rooting again if ODIN still works in Download Mode.
Do you know how to?
exonerare said:
Sounds like the phone is bricked.
You have to return to stock S3 via download mode and start the rooting again if ODIN still works in Download Mode.
Do you know how to?
Click to expand...
Click to collapse
No, i don't know, I installed unofficial cyagenmod via odin but it's not working now
Gate11 said:
No, i don't know, I installed unofficial cyagenmod via odin but it's not working now
Click to expand...
Click to collapse
Follow this video https://www.youtube.com/watch?v=4NMTWvXQPjk
Read the description.
Good Luck.
exonerare said:
Follow this video
Read the description.
Good Luck.
Click to expand...
Click to collapse
That's what I was doing actually, i'm trying to download a new ROM now.
doesn't work, any other idea please?
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
@Gate11: try to repartition, Link
Take 4.3-set, of course, and if it contains no PIT-file, take this from 4.1.
rp158 said:
@Gate11: try to repartition, Link
Take 4.3-set, of course, and if it contains no PIT-file, take this from 4.1.
Click to expand...
Click to collapse
The links are dead :/
@Gate11, they aren't dead. They're Mega-links, download via your PC-browser or Mega-app.
rp158 said:
@Gate11, they aren't dead. They're Mega-links, download via your PC-browser or Mega-app.
Click to expand...
Click to collapse
I know me.ga but the files were deleted.
@Gate11, shame, then take this german site to download or search by yourself.
Keep in mind I am new to this stuff.
So I am trying to root my phone, Samsung Galaxy J7 (Model SM-J700T, Android 6.0.1), but I cannot get to the TWRP recovery screen despite ODIN saying "Pass". Instead of bringing me to the TWRP it bring me to the Samsung logo with "recovery is not seandroid enforcing" in the top left hand corner, and then brings me back to my home screen.
Here is my log of Odin.
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Any help asap is very useful
Bump
Bump x2. I really do need help with this.
Bump x3
What img did you use?
Same issue here. Just picked up new Galaxy J7 2016 model SM-J700T and ODIN latest TWRP but no recovery access and same Red RECOVERY IS NOT SEANDROID ENFORCING on boot screen. Most likely there is a change and the TWRP work for all J700 variants except the "T" model until revised I would guess. So, guessing were all stuck till someone catches up and provides a newer TWRP or solution.
Anyone know where to find an extracted stock recovery for the "T" variant to ODIN back for now?
Yeah I just got mine today came home booted windows and followed the post in the thread that showed how to do it and I get the same error. <sigh> guess I should have read more but defiantly need to find the stock recovery or a way to make twrp work....
Created Stock Recovery to Put Back For Now
Since we were all messed up applying TWRP Recovery. Here is the ODIN flashable stock recovery Android 6.0.1. Just created and flashed it back to my T-Mobile SM-J700T and it says Official once again instead of Custom. For those interested in putting your phone back to normal for now. Test booted into Recovery as well.
STOCK T-Mobile Recovery: https://drive.google.com/file/d/0BxGWUugQJLVkNzNvWnFGYTU5VHM/view?usp=sharing
feelx77 said:
Since we were all messed up applying TWRP Recovery. Here is the ODIN flashable stock recovery Android 6.0.1. Just created and flashed it back to my T-Mobile SM-J700T and it says Official once again instead of Custom. For those interested in putting your phone back to normal for now. Test booted into Recovery as well.
STOCK T-Mobile Recovery: https://drive.google.com/file/d/0BxGWUugQJLVkNzNvWnFGYTU5VHM/view?usp=sharing
Click to expand...
Click to collapse
Thanks! Hope it works! (
I am new to all this..
ItsJustRoy said:
Thanks! Hope it works! (
Click to expand...
Click to collapse
I am rooted and like you all, I have no recovery just a red message
"recovery is not seandroid enforcing" I have had no luck with any recovery flash attempts and I also do not have super user but I did when I very first flashed the correct file for root?
I tried to Odin flash the file you have shared as stock recovery image but I am not sure if I am using correct Odin version...
I tried to flash in a newer Odin under AP and when that didnt work I tried Odin v1.85 and selected PDA. Neither of these worked for me.
Please advise on which Odin version to use and then which location to select? Thank you much!!
There has been no real focus on custom development for this phone. I have searched forever and this is the first phone I've bought that Developers are not really focusing on. I also have an s6 Edge+. Because it cost me $800 after taxes. I guess that's worthy!
I have problem too!
[/CODE]
ItsJustRoy said:
Keep in mind I am new to this stuff.
So I am trying to root my phone, Samsung Galaxy J7 (Model SM-J700T, Android 6.0.1), but I cannot get to the TWRP recovery screen despite ODIN saying "Pass". Instead of bringing me to the TWRP it bring me to the Samsung logo with "recovery is not seandroid enforcing" in the top left hand corner, and then brings me back to my home screen.
Here is my log of Odin.
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Any help asap is very useful
Click to expand...
Click to collapse
Damn me too and need to root for unlock my phone UFFF any help for this model for now ¿?
Thank !!!
Seems I have the same (or similar) issue. Install TWRP with Odin and it always passes install. Then when I try to enter TWRP recovery mode the factory recovery always comes up!
Tried w/ auto-reboot on and off.
Tried, after install, to turn off phone with vol-dwn/home/power THEN immediately (on screen blanking) switch to vol-up/home/power
Tried w/ auto-reboot on.
Tried w/ reboot off to just remove the battery then replace the battery and go into recovery, etc.
Every combination that I can think of, or have read about, all no good. Nothing I do gets me into TWRP recovery, always recovery is the factory Android recovery.
Any ideas, folks?
Thanks!
Specs:
Galaxy j7 (SM-J700T)
Exynos Octa 7580
Android 7.1.1
Bootloader J700TUVU3BQK3
Build: NMF26X.J700TUVU3BQK3
Root access: No
Odin3_v3.13.1
Tried with several TWRP TARs:
twrp-3.2.1-0-j7xelte.img
J700T N-7.1.1 TWRP-Unofficial
twrp_3.0.3-1_sm-j700t_23217
I rooted my phone using odin3 then tryed to flash the sdk23 arm64 xposed framework using flashify
Now im stuck on the samsung word logo 'boot loop' and i don't know how to fix it:crying:
Also have a custom recovery [TWRP]
now i think i broke it :crying: i cant get into the recovery mode i dont why but i went to advance wipe and check all of it
also now doesnt do to the samsung word logo it stays on the samsung galaxy s6 powered by android screen
also when charging no green is seen just a empty battery with lighting bolt
plus KERNEL IS NOT SEANDROID ENFORCING in red in the top left corner.
Think i basicallly wiped everything ohno
I'm struggling to understand why you were using Flashify to install Xposed, especially since you have TWRP. Regardless, you have to try and get it into Download Mode. If you can, you should be able to reinstall the original firmware.
es0tericcha0s said:
I'm struggling to understand why you were using Flashify to install Xposed, especially since you have TWRP. Regardless, you have to try and get it into Download Mode. If you can, you should be able to reinstall the original firmware.
Click to expand...
Click to collapse
i am able to get to download mode (odin mode right?), now how do i reinstall the original firmware? (maybe link me some steps)
1000 tutorials here on xda or youtube.
Basic structure:
find / download firmware
boot to Download Mode
open Odin as admin
place .tar or .tar.md5 file of the firmware in AP slot if one 1 large file or if it is split into multiple ones then they will be labeled obviously for BL, AP, CP, CSC just like in Odin.
Hit start and wait for a bit. If the flash is successful but it is stuck in a boot loop, then reboot to the stock recovery and reset it.
es0tericcha0s said:
1000 tutorials here on xda or youtube.
Basic structure:
find / download firmware
boot to Download Mode
open Odin as admin
place .tar or .tar.md5 file of the firmware in AP slot if one 1 large file or if it is split into multiple ones then they will be labeled obviously for BL, AP, CP, CSC just like in Odin.
Hit start and wait for a bit. If the flash is successful but it is stuck in a boot loop, then reboot to the stock recovery and reset it.
Click to expand...
Click to collapse
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and on the phone says
SECURE CHECK FAIL : (BOOTLOADER)
Looks like you're using the wrong firmware. You have to use one for your variant and you typically can't downgrade bootloaders so it's gotta be the same firmware or newer.
es0tericcha0s said:
Looks like you're using the wrong firmware. You have to use one for your variant and you typically can't downgrade bootloaders so it's gotta be the same firmware or newer.
Click to expand...
Click to collapse
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> __XmitData_Write
<ID:0/003> Complete(Write) operation failed
i used a file G920IDVU3EPEA_G920IXSA3EPEA_G920IDVU3EPEA_HOME.tar.md5
pretty sure its the right one, the sticker on the back of my phone says its SM-G920I
This fail doesnt have the SECURE CHECK FAIL : (BOOTLOADER) on the phone
Also 'An error has occurred while updating the device software. Use the Emergency recovery function in the Smart Switch PC software' appears on the phone screen
Never Mind i fixed it i just had to use a differnt cable, think my cable was broken.
Cant get into the recovery mode (hold down the volume up, home and power button at the same time) right?
did a factory reset in recovery mode still have a bootloop
never mind again just didnt have the battery to boot up sorry think its fixed how love ya
xKyono said:
never mind again just didnt have the battery to boot up sorry think its fixed how love ya
Click to expand...
Click to collapse
:good::highfive::victory:
Hello,
Recently I bought a second hand Samsung Galaxy SIII 9300 with Android 4.3. Because of privacy reasons I’d like to install cm 13.0 on the phone. I already had CM on my former phone, the Nexus 4. This was very easy to install, but I have some difficties with the Samsung Galaxy S3. These are the things I already tried:
I tried to install TWRP 2.8.4 and CWM via Odin 3.1203 in Windows 8. You can see here the log:
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
I enabled USB debugging
I unchecked Auto-reboot in Odin.
After I installed TWRP I removed the battery.
Can you help me with my problem?
According to Odin, TWRP succeeded. Can you boot into TWRP? You flashed the correct version of TWRP?
Hello
I cannot boot into TWRP. I am sorry to put it in my question, but that is my question. I tried to flash TWRP 3.0.2.2
Open Odin, only check f reset time, flash, when you see the "reset" in the Odin status window, remove USB cable from phone, remove battery, replace battery, use buttons to get into TWRP.
Root then flash. Flash Chainfire autoroot then flash your recovery, then flash your rom.
Beamed in by telepathy.
I worked!!!! I has to root the phone and than flash TWRL. Thankt you very much!!!
Jan10000 said:
I worked!!!! I has to root the phone and than flash TWRL. Thankt you very much!!!
Click to expand...
Click to collapse
You're welcome. Further advice is to make a backup of your phone once it is set up as you like it. That way, if anything goes tits up you have half of the job already done.
With twrp it's only a matter of time before it (twrp) goes mental and you'll have to resetyour device amd start over. I found the last official clockworkmod recovery the most reliable and have had 2 solid years from it. Also, get a copy of your stock rom from somewhere. You'll need that one day too!.
Beamed in by telepathy.
audit13 said:
Open Odin, only check f reset time, flash, when you see the "reset" in the Odin status window, remove USB cable from phone, remove battery, replace battery, use buttons to get into TWRP.
Click to expand...
Click to collapse
Hi, thanks. This worked for my GT-i9305.
I had previously done the flash for GT-i9300 years ago and was stuck on the same issue as the op.
TWRP 3.3.1-0
twrp-3.3.1-0-i9300.img
twrp-3.3.1-0-i9300.tar
source: https://github.com/ripee/android_device_samsung_i9300