[Q] Broken tablet screen - Android Q&A, Help & Troubleshooting

Sorry if this is not the place to solve my problem, but her it goes:
I have a tablet with a broken screen, no touch, no hdmi, acepts mouse with an adapter( white brand, something like fusion 5, its chinese)
Al i want is too see it's image on pc's screen, there are several programs as you must know, but all of them need root, i dont have root and odin cant detect my device, plus, my pc wont recognise my device in my computer.
Help please.

Related

[Q] MK808B don't boot

Hi
I have a problem with my google tv , MK808B
It doesn't boot
I have black screen after "android"
It seem to be a real one, not a fake, I open it and see it on another site, with pictures from the real and the fake
I try to flash another firmware, but I can't put it in flash mode, when I press reste button and connect to usb from otg to my pc, my pc doesn't detect mk800b
I try on differents pc
Sorry for my english, I prefer try by myself, I think it is better than google tradcution (perhaps not ?)
Up
Hi there, I got that problem as well when I first got it. Mine just stucks at the "android" logo screen forever. I panic and look up online. Apparently if you be able to flash different rom then the stock one, it should work fine like in my case. First connect your device to the computer under flash mode. So when you download the firmware zip file, unzip and you file the driver for your device "\Rockchip_Batch_Tool_v1.5\Rockchip_Batch_Tool_v1.5\RockusbDrive" it will depend on your computer to be 32 or 64bit to choose the right driver. Next go to your device manager, scan one more time for new device and update the driver from the directory above. If you install the driver properly the computer will recognize your device with no hiccup. Hope this help cause I solve my problem through this step as well.
Old threat but......
There is something around google with the nandchip pin 8 & 9. I rote something after search for mk808b firmware. Sorry for the bad help.
Kis Plus Ersatzhandy

[Q] Eken A90 (rooted) showing UNWANTEDLY as ABD

Hi guys, I hope you can help.
I'm tech savvy, but this has been driving me bonkers.
I bought a cheap EKEN A90 (Allwinner A10) from China - I can't remember what version of Android it had, but it was a slow and clunky as hell.
To cut a long story short, I tried flashing it with CM9 and CM10 and managed to brick it, only being able to bring it alive with the lovely and helpful people here using livesuite and a custom firmware A90sun4i_crane_t05a_mma7660_20120614-.img and gapps etc etc....and actually works SO much smoother!
Anyway, BEFORE, when I plugged in the USB, it would show up in My Computer (I'm on Windows XP) as 'CRANE' or something like that and was easy to transfer files between my PC and tablet.
Since the new firmware, when I connect to my PC, it comes up as an ADB device, installs drivers (something like WdfColnINstaller or something) and then says it's a Samsung phone! Which I don't want! I just want it to show up in My Computer like it did before!!!
I used to have Kies installed as I have a Galaxy S2, but have since installed it. (btw my phone comes up as a portable device, which I would love the tablet to do!!)
I've tried loads of things; changing cables, USB debugging mode on and off (there's no MTP option on the tablet btw) uninstalling the ADB thing in PC Device Manager, but nothing has worked and it's driving me bonkers!
I've even looked into changing the tablets Device ID (USB\VID_18D&PID_0002) because apperently that notifies Windows that it's an ADB Instance.
Many thanks

[Q]Bricked Quattor 10+ overmax

Hello. I have problem tablet Overmax Quattor 10+ (my friend give it to me, becouse she pushed too hard power on button, so I had to open tablet and repair it by home-made solution). Everything gone perfect, tablet went on to the PIN screen. I asked her if she know it, but she said that the tablet hadn't any PIN secure. I was searching a lot how to crack PIN (not for SIMcard, just Android secure), but I didnt find anything so I started to install software again. I downloaded everything from here : overmax site. After download I pressed HomeButton connected to PC, program has found the device and asked me to format or not device. I pressed yes, the formatting went to 4% and device has disconnected (I didnt touch the USB cable or something). After this tablet couldn't boot (nothing show on screen), when I try again to format it, the program show info, that the Tablet or system image is incorrect. Windows detect the device in Device Manager. Anyone have solution for this?
Thank you in advice. Greetings.

[Q] Problems with Graphic Tablet on Android

Hi guys i have a one problem with device compatibility - when i try to connect Genius EasyPen i405x with Galaxy Tab 2 7.0. (with rooted stock firmware) i have trouble with recognition, because system can't correctly recognize that device - yeah android system says about successful usb connection, but when i tried to use stylus on graphic tablet i only have unmovable cursor on the screen, and touch of stylus recognises like a android "back" button
(Have any ideas? Maybe this cause with driver problem?)
P.S. Sorry for a bad english, because for me it is a foreign language :crying:
And please dont get mad at me for this stupid question - i only want to draw on my galaxy tab anytime and anywhere

Ematic EGS-102 stuck on logo screen; computer doesn't see it when connected with USB

Hello,
I have a rooted Ematic EGS-102. Following some instructions to swap my internal sd with the external one (as the memory where the apps' data get downloaded to was only 500MBs), I believe I have typed something incorrectly inside the vold.fstab file, because after rebooting my tablet it's forever stuck on the logo screen. This is my first android tablet so please bear with me. The solution that comes to mind is to open the root files by some program on my PC and edit the vold.fstab file back (I even have a backed up version of it from a few weeks earlier), or even flash a new ROM. Now, the problem is, my computer cannot see my tablet when I connect it through USB. At all. Back before when the tablet was fine, I could use the USB to transfer files to and from my computer, but after I killed my tablet, my computer doesn't even make the sound which indicates that a USB device has been connected.
I have tried changing the USB cable and the port where I connect it to (never mind that the same cable and port work with other devices), to no avail. Having given up on the USB method working, I decided to follow some instructions on installing a custom ROM that has worked on EGS-004, and according to the one who posted that, would work on other variants such as EGS-102. Basically It was steps to installing the ROM from the external card through Recovery mode, which I followed thoroughly to no avail. The tablet still gets stuck on the "ematic" logo start screen.
I've noticed that in the Device Manager my tablet is displayed as "USB Device(VID_1f3a_PID_efe8)" with a yellow triangle mark indicating that it's not working properly (code 10). I tried searching that error code and trying all the solutions I found to no avail, including updating the driver (just refuses to update and keeps telling me that my driver is up to date.)
Sadly all the other methods that would have a decent shot at working (Root explorer on PC, android recovery program, even a flash EGS-004 firmware method on ematic's website) requires USB. I'm out of solutions, and unless I can get the USB to work somehow, or find out why the ROM method didn't work, my tablet would officially be dead. I'm utterly miserable that such a stupid mistake on my part ruined my tablet, and I have no way of buying another (broke student here) or returning it (out of warranty and I'm pretty sure I voided it anyway). I would absolutely appreciate any help, and thanks in advance.
Edit: It's stuck on logo screen, not a bootloop. I'm terribly sorry for this confusion, my head isn't straight right now.
Still haven't found a solution :/

Categories

Resources