Hi!
The touchpad of my Jiayu G4B doesnt work.
My touchpad was mad doing strange things so i tried to fix it with adb and it was success.
After that i wanted to update it and after it i got the problem again.
So, knowing that with adb works correctly i did it again having an error, something like "cant enter bootini". Since then, my touchpad does not work and when i try to do the fix i get the next problem, so i cant use the mobile phone T_T
I tried some of chinesse official roms and i got the same problem.
What can i do?
Thx in advance :good:
none knows ? :S
BUMP!
:crying::crying::crying::crying::crying:
bump after 2 months...
Related
Heres what happened... A good friend of mine did a factory reset soon after I rooted her phone because sms stoped working. now it wont boot to anything other then Download mode and only after many trys to even get it to do that. I have flashed and mods lots of phones before but I cant get anything to work with this phone. the one program I found and thought might work has a dead link and no where on the net can I found it. if anyone has any ideas please help or even the ROMTools v2.3.1 (ex-recoveryflasher) I could try all that I have collected.. Thanks
Thanks
Chris
Its not serious just follow this guide and you should be good.http://forum.xda-developers.com/showthread.php?t=1090687 In hindsight, you should tell everyone when you root their phone "Don't factory reset!"
I'm using Lenovo A766, Android 4.2.2. My device is a rooted android. I have a problem that just happened last night. I tried to install 'Chainfire 3D'. To those who know how Chainfire 3D works, I'd appreciate it but to those who dont know, we need to install something that even I cant remember what it is but it did give me a warning about something before installing it. My problem is, Once I installed the application, My device would reboot automatically. Now, my Lenovo A766 would not boot up, It's stucked at the boot up. Idk whether we call this brick or what but as I know, Brick is when your phone cant even shine a single light. But my device can, just it gets stucked at the boot up. Please help me asap. Thanks for reading this thread. All ways to fix my problem are really meaningful to me. I'd really really appreciate it! Thanks again!
Please help me. Onegai shimasu.
(Sorry for new post, a guys ask me to write my ask here)
Hello guys, this is two days I'm looking for how to fix the problem but it's two days that I can not.
There are two days I tried to install firmware on my Jiayu 3s while operating, SP Flash Tool said the root had gone well since that day, impossible to turn on my phone, does not start, but does not load is detected as the "Alcatel DNIS # ** Interface" on my computer, I tried several methods; reinstall the drivers, try to reflash ect .. but nothing happens. I know this method before, I had a Chinese firmware (MOLY.lr9.w1423.md.lwtg.cmcc.mp.v9) , everything had gone well, stages ect ..
But when I tried to flash firmware with Europeans, it was bricked the phone and from that day, I can not do anything.
(Sorry for the bad English but I use Google Translate)
Can you help me solve the problem? I you will be very grateful if someone could help me.
My phone has a non-removable battery.
Regards,
Lackted
I need help please...
I need my phone
Hi guys im new here,greetings to y'all
I got a serious issue,i don't know if someone shared before but i've been busy for a looong time so i didn't check.Shortly;I rooted,i installed cm13..ok no problem everything's fine...But after awhile it uses so much ram and battery,i decided to turn back but oops,no recovery.So i rooted again i did everything i did but no,i tried with smart switch,it says that no device is connected,used KİES,didn't help either..I used odin3 to install stock rom but it gave a RED ALERT.. I had to use Odin3 again for that serrano stuff..that help me to OPEN my mobile properly again..I tried many time but it didn't help..Does anybody know a solution?Hope this will be helpfull for others who have the same problem..Thanks in advance
Dear Friends,
My Elephone S7 4gb+64GB keep scrolling through boot mode options from up to down. no button is working during this condition except Power Off option.
It Only Turns ON when USB cable is connected to PC.
Otherwise Its Totally dead and can not be turned ON with any combination of Buttons.
I have flashed it with every Stock ROM available on needrom forums. along with Recovery as well.
Nothing worked.
P Lease help.
Best Regards
Maozay Saleem
I have the same problem :crying: someone whit a solution pleaaaas
Was there ever a solution to this please? (I know it's a really old thread but I can't find anything else on this exact problem)
Kerri2602 said:
Was there ever a solution to this please? (I know it's a really old thread but I can't find anything else on this exact problem)
Click to expand...
Click to collapse
Same for me. Doesn´t have anybody a solution yet?
I just could solve the boot error for some weeks after doing a factory reset over the chinese mode until the faillure came up again.
So i resetted it again but this time either this didn´t help.