In order to get ODIN running for rooting I tried installing Kies under Windows. I tried two VMware sessions on my Mac : On both occasions I used the original cable and turned USB debugging OFF (required for Kies). I assigned the USB port to the VMware session of course.
Windows XP SP3 : It did install normally but drivers install of Samsumg MTP device failed
Installing went OK.
Windows 7: Same problem and Kies appeared in a red window.
On the Mac native (OSX 10.7) Kies installed and connected normally, but cannot use it for rooting as ODIN is for Windows only.
Adre these device drivers really required for ODIN ?
i think u need the drivers. forget kies. just download the samsung drivers and install them. u have to put the phone into download mode to install firmware via odin -> VOL_Down+Home+Power
the drivers u will get here (will work for sgs2 too):
64bit Windows (all versions): http://drivers.softpedia.com/get/MOBILES/Samsung/Samsung-Galaxy-S-USB-Driver-for-Windows-x64.shtml
32bit Windows (all versions): http://drivers.softpedia.com/get/MOBILES/Samsung/Samsung-Galaxy-S-USB-Driver-for-Windows-x86.shtml
Yea it doesn't work on Mac. Got 10.7 running here too, but I only flash through my CWM directly now. When I need odin, I just use my mom's laptop.
Hope not too late, here's the link for downloading Odin, Kies, Kies3, Smart Switch, and all needed drivers for Samsung phones: http://www.droidviews.com/android-usb-drivers-samsung-motorola-sony-lg-zte-htc-asus-huawei-acer/ Thank me if this helped
I've got an Xperia U (st25i) unbranded firmware 6.0.B.3.184, but my Windows 7 x64 doesn't show adb device at all, I have a working mtp device (that looks like it cannot be disabled). Same device works fine in adb on linux, even passing the usb device to a vmware machine with linux.
I've tried with Xperia_P_Xperia_U_Xperia_sola_drivers.zip and install PC Companion, but the adb devices still does not show, if I force add the adb interface from inf, windows 7 says it cannot start, there is same problem on windows 7 x86. Windows xp x86 instead automatically installs mtd devices but prompts for the adb device drivers, so I can give him the drivers. Any clue?
Make sure PC is connected to internet then connect the device in fastboot mode. Win7 downloads and installs drivers automatically.
Sent from my Blade using Tapatalk 2
Had the Same issue. Just Google for win7 64bit and xda. Sorry i have no Link. But Problem solved easy
Rapier07 said:
Make sure PC is connected to internet then connect the device in fastboot mode. Win7 downloads and installs drivers automatically.
Sent from my Blade using Tapatalk 2
Click to expand...
Click to collapse
I don't need fastboot drivers, just adb to develop, I'm always connected, but adb interface does not show at all in device manager, I don't have unknown/failed devices in device manager
sherpya said:
I don't need fastboot drivers, just adb to develop, I'm always connected, but adb interface does not show at all in device manager, I don't have unknown/failed devices in device manager
Click to expand...
Click to collapse
You have the "wrong" drivers installed. Use the drivers provided with c:\flashtool\drivers
-> then turn off internet on pc before connecting phone. <- prevents windoze from auto install via update
xperia mt27i
gazhead said:
You have the "wrong" drivers installed. Use the drivers provided with c:\flashtool\drivers
-> then turn off internet on pc before connecting phone. <- prevents windoze from auto install via update
xperia mt27i
Click to expand...
Click to collapse
The only driver windows automatically install is the mtd (that doesn't need internet because is in win), I don't have the device VID_0FCE&PID_5171&MI_01 but only VID_0FCE&PID_5171
It's a bit strange a common developer should download a non sony tool to develop with a sony phone
I had a similar problem with my XS, I get around it by enabling 'install PC companion' in connectivity settings under 'xperia'. Then when you plug the phone in, on your phone select install. It should then appear both as an MTP device the PCC installation, just cancel that latter.
I've used the wrong thread title, it should be x64 not x86, I've just verified that windows 7 32bit downloads and installs the adb driver, I had similar problem with gt7500 on windows xp 64bit, http://forum.xda-developers.com/showthread.php?t=1434319
I've solved modifying the inf file, I think I cannot change inf on windows 7 x64 because the driver becomes unsigned. Perhaps gt7500 works fine on windows 7
Heh... You stiill refuse to listen.
Install drivers provided with flashtool. Just doit and report back
mt27i
tested with internet disconnected and drivers pack in flashtool-0.9.1.0-windows.exe, same thing, windows shows only mtp device
check this out:
http://forum.xda-developers.com/showthread.php?t=1554632
more drivers:
http://www.mediafire.com/?2fxtdec2fxacux1
sherpya said:
It's a bit strange a common developer should download a non sony tool to develop with a sony phone
Click to expand...
Click to collapse
eeh.. its GOOGLE Android default tools. adb fastboot etc its all Android getit?
Request
thebrainkafka said:
Had the Same issue. Just Google for win7 64bit and xda. Sorry i have no Link. But Problem solved easy
Click to expand...
Click to collapse
Tell Me how Please....:crying:
I just solved this issue for my Xperia S.
Here are the steps:
1. Install driver on flashtool (I also install the pc companion)
1. On device manager, open the MTP device, and select reinstall device driver
2. Choose install the driver manually and list the compatible driver
3. It would only show one "USB Composite Device" for this device and install it
4. After the driver installed, the adb device just shows up!
Im running Win8 on my PC and want to S-OFF with Racoon. But the drivers in the Racoon Websites are not working with Win8
Any help ?
You need to uninstall all existing drivers and software of your phone from your pc.
You also need to disable driver enforcer signature on your pc.
Then boot your phone Into bootloader and select fastboot, connect your phone into your pc and it should appear on your phone as fastboot usb, nothing will appear on your computer because it has no drivers.
You need to go to device manager on your pc and you would see android 1.0(make sure your phone is still connected).
You need to manually install drivers for it which could be found here( http://forum.xda-developers.com/showthread.php?t=1998650 )
After you successfully install it, everything should work fine and your pc should recognize it on adb or fastboot
i had a fresh install of windows 7, evn prvsly i was on windows 7 and somehow i had managed to install all drivers for xperia p
but after this fresh install i am unable to go to fastboot , somehow i installed flashmode drivers
i evn installed the drivers from fastboot-drivers.exe but no use when i start flashtool and try to enter fastboot mode i get an error message saying the device drivers are not installed , install these drivers from flashtool folder
what do i do ? evn in device manager when i update it doesnt find any software.. when windows try to install s1boot fastboot drivers it shows not installed
where m i wrong? please help me
I think i had that same problem too, and took me some time to find the right answer, it is probably windows that won't install unsigned drivers, so try reboot, and press F8, and allow installation of unsigned drivers, though i just wrote a CMD code at that page i visited, but i can't find it now lol.
Well try here http://www.techspot.com/community/t...signed-drivers-in-windows-vista-7-x64.127187/
pda net
try to install pda net app on ur pc
if this dont work than open device manager
and plug ur phne in fastboot mode
on device manager ut show s1 fastboot somthing like that just for 5 sec
hurry and double click on that
after that update driver
select browse my computer for driver software
after that select let me pick from a list of device
after that click on android device
and click on next and ur driver is installed
but first install pdanet on ur pc
Hey everyone,
so I'm trying to flash CWM again on my p760 after i had to factory reset with the LG tool (since.... i'm dumb and had my cwm backup removed from my card before....... i hate myself), but since Windows 8.1 is a *** i'm just not able to install the omap drivers for fastboot. When i try to search the directory windows just tells me that no drivers where found, when i install them manually i get the USB Connected sound like every second and can't do anything.
I have searched up and down for solutions...but none of them worked.
I'd also tried the Nocturnal drivers (which obviously didn't work but i'm desperate)
I even tried a VM with Windows XP setup, but i can't get the USB to pass trough my 8.1 without having the nonstop USB Connected sound....
Is there any solution? Maybe a linux flash? I've been bashing my head against this problem for hours now and just want my recovery back
ps.: i also installed the Windows Hotfix for fastboot, but to no avail.
I gave up on it. Install windows 7 instead. With windows 8 you can disable signature enforcement and install driver correctly, but not in windows 8.1.
nhoc_maruko9x said:
I gave up on it. Install windows 7 instead. With windows 8 you can disable signature enforcement and install driver correctly, but not in windows 8.1.
Click to expand...
Click to collapse
Thanks. I just installed Win7 on my old PC and it's finally working again! What a hassle tho