Related
I have the Corsair Vengeance 2000 headset and i would like to use it with my SGS3 running Temasek's unofficial CM10 rom.
I tried using a OTG-cable and plugged in the the USB adapter that comes with the headset but no sound seems to go through.
When i connect the USB and turn on the headset, i am able to control the volume with the wheel on the side of the headset but i can't play sound.
I ticked on "use usb dock audio" in advanced settings but still, no sound.
What can i do to get sound through?
What am i doing wrong?
I am willing to change ROM or Kernel to get this to work, if possible.
I have a friend who got a g930 to work on his sgs3.
Thanks in advance.
If you are using custom kernel than there is an option ENABLE OR DISABLE PRIVACY MOD in sound section of kernel settings that might be the problem...
I'm afraid i have no idea what you are talking about.
I checked in setting>sound and there was no such option.
Am i looking the wrong place?
Sorry for being a noob
Chaitanyapatel8880 said:
If you are using custom kernel than there is an option ENABLE OR DISABLE PRIVACY MOD in sound section of kernel settings that might be the problem...
Click to expand...
Click to collapse
You're talking about boeffla kernel which is not compatible with CyanogenMods.
wtfhaxxor said:
I'm afraid i have no idea what you are talking about.
I checked in setting>sound and there was no such option.
Am i looking the wrong place?
Sorry for being a noob
Click to expand...
Click to collapse
better ask on the official cyanogen discussion threads:
10.1: http://forum.xda-developers.com/showthread.php?t=2035141
10.2: http://forum.xda-developers.com/showthread.php?t=2382573
SignetSphere said:
You're talking about boeffla kernel which is not compatible with CyanogenMods.
Click to expand...
Click to collapse
I'm using the boeffla kernel currently. Should i change kernel?
Edit: I am using Temasek's unofficial CM10.1 who suggested using this boeffla kernel in his thread.
wtfhaxxor said:
I'm using the boeffla kernel currently. Should i change kernel?
Click to expand...
Click to collapse
Then there's your problem. Like I said boeffla kernel is NOT compatible with cyanogemod so yes you better change it. You're quite lucky your device isn't bootlooping.
"Note: This kernel is only for Samsung based Jelly Bean (Android 4.1.x) roms!!! Do not install it on CM or AOSP based roms!!!
Also do NOT install it on any Samsung 4.2.x based Roms!!! You will just get a boot loop!!!"
quote from AndiP's boeffla kernel thread.
oraends sang
SignetSphere said:
Then there's your problem. Like I said boeffla kernel is NOT compatible with cyanogemod so yes you better change it. You're quite lucky your device isn't bootlooping.
"Note: This kernel is only for Samsung based Jelly Bean (Android 4.1.x) roms!!! Do not install it on CM or AOSP based roms!!!
Also do NOT install it on any Samsung 4.2.x based Roms!!! You will just get a boot loop!!!"
quote from AndiP's boeffla kernel thread.
Click to expand...
Click to collapse
What would you suggest i install? I am very new to the whole android "rom's and kernels" part of technology.
wtfhaxxor said:
What would you suggest i install? I am very new to the whole android "rom's and kernels" part of technology.
Click to expand...
Click to collapse
Upon browsing temasek's thread I see that he is indeed using a boeffla kernel but from what I can understand there is he's modifying it for it to be compatible so he made minor adjustments. I just don't know if he is still using boeffla kernel 2.x or the 3.x branch. You can however use the default kernel provided in the OP of temasek's thread and see if that can fix your problem.
http://forum.xda-developers.com/showthread.php?t=1797109
EDIT:
Your still on 10.1 when temasek's rom is already on 10.2
Download links for the 10.1 kernel are still available on the thread of temasek.
no you do not have the boeffla kernel installed (which is for stock sammy) but you have temasek kernel with boeffla sound (it's an important difference ) so the kernel is just fine for cm10.2
I think it is not possible to use a wireless headset (which is not based on bluetooth) on android, because there are no compatible drivers. I had a similiar idea: i tried to connect my external usb sound card with usb otg. on cm10.1 i was able to hear sound through it, but I was never able to switch on the optical out of the soundcard because the driver was missing. Now on cm10.2 I am even not able to hear any music with it. maybe just for a test you could try a cm10.1 based rom, because there I personally had the best results with music through otg
Edit: sorry i saw your post to late (I am really to slow in writing )
Edit2: @ OP: which rom does your friend with the g930 use?
Edit3: last one: I think the option with privacy mode is in the boeffla sound config app (sorry I cannot check it, because I do not use this kernel anymore)
Darkened_Sky said:
no you do not have the boeffla kernel installed (which is for stock sammy) but you have temasek kernel with boeffla sound (it's an important difference ) so the kernel is just fine for cm10.2
I think it is not possible to use a wireless headset (which is not based on bluetooth) on android, because there are no compatible drivers. I had a similiar idea: i tried to connect my external usb sound card with usb otg. on cm10.1 i was able to hear sound through it, but I was never able to switch on the optical out of the soundcard because the driver was missing. Now on cm10.2 I am even not able to hear any music with it. maybe just for a test you could try a cm10.1 based rom, because there I personally had the best results with music through otg
Edit: sorry i saw your post to late (I am really to slow in writing )
Edit2: @ OP: which rom does your friend with the g930 use?
Click to expand...
Click to collapse
I see... so it's a cm rom with boeffla sound. I though the OP uses the boeffla kernel itself. I had no idea since i haven't used any cyanogenmod based rom yet :laugh:
Darkened_Sky said:
no you do not have the boeffla kernel installed (which is for stock sammy) but you have temasek kernel with boeffla sound (it's an important difference ) so the kernel is just fine for cm10.2
I think it is not possible to use a wireless headset (which is not based on bluetooth) on android, because there are no compatible drivers. I had a similiar idea: i tried to connect my external usb sound card with usb otg. on cm10.1 i was able to hear sound through it, but I was never able to switch on the optical out of the soundcard because the driver was missing. Now on cm10.2 I am even not able to hear any music with it. maybe just for a test you could try a cm10.1 based rom, because there I personally had the best results with music through otg
Edit2: @ OP: which rom does your friend with the g930 use?
Edit3: last one: I think the option with privacy mode is in the boeffla sound config app (sorry I cannot check it, because I do not use this kernel anymore)
Click to expand...
Click to collapse
I am using cm10.1
I have tried using an external usb sound card and that worked just fine.
I am not sure what ROM he is using. And i also have no means of finding out.
I tried the privacy mode and it does nothing. I don't think it recognizes the headset because it is not plugged in the minijack
wtfhaxxor said:
I am using cm10.1
I have tried using an external usb sound card and that worked just fine.
I am not sure what ROM he is using. And i also have no means of finding out.
I tried the privacy mode and it does nothing. I don't think it recognizes the headset because it is not plugged in the minijack
Click to expand...
Click to collapse
Yes. As far as i know privacy mode on boeffla sound only supports headsets being plugged through the headphone jack.
bump
Has anyone ever had any success with this kind of thing?
As i stated earlier i am willing to switch roms or kernel to make this work.
So guys ive experimented a bit and found out how to compile a kernel from source. Some guys here are waiting for permissive kernel to install linux deploys etc. Here it is. Not perfect yet, but seems to work. Has nothing special features. Uses my ramdisk from my xKat Rom with init.d support. So please dont ask for more features!! Its mostly pure stock. When i try to build a custom kernel, i will make a new thread for it.
Download
Stock_KK_Permissive_Kernel_NG1-p605
Stock_KK_Permissive_Kernel_NJ1-p605
Stock_KK_Permissive_Kernel_OB1-p605
How to install
Download the file and place the Zip on your intern or extern memory.
boot into Recovery
go on install into TWRP
look for where you placed the Zip
click on the zip an slide to the right
after that go to reboot
How to set permissive?
Permissive is not activ on boot. So use the App "Terminal Emulator"
open it
type su
type setenforce 0
to check it type
getenforce
and you will see its permissive now. But only for this session. If you rebot your device it will enforcing again.
Better choice is the App "SElinux Mode Changer".
Install it from Play Store
and set on permissive
It works with any boot now.:good:
Troubleshooting
if you have trouble with WLAN, delete your connection onetime
reconnect to your accesspoint and WLAN will work again.
Picture
View attachment 2886592
Please hit "thanks" and rate this thread if you like my work or buy me a beer
Good, thanks a lot. Did you face problem like me - when compiled zImage, updated boot.img using abootimg -u -k ../../arch/arm/boot/zImage ...
I was flashed it and get into download mode. Tablet sayed - cannot boot os or something similar. Sorry for bad english.
Great job. Works fine. Thx
@Tautvaldas
Didnt tried it yet. Ive made it on windows cause my ramdisk of the NG1 kernel was there.
i made mine too, i did all the stuff like uv and zzmove gov added in,, but got problem during flash, sad
will test your thanks
Can someone build kernel with framebuffer console support - http://blackfin.uclinux.org/doku.php?id=linux-kernel:drivers:fbcon
@hanspampel
A noob question - but it's better to be sure before start doing something
Moreover - you are the only who made a custom kernel for this device :highfive:
So: is it true I should only replace boot.img with original one (from original tar.md5 package) and change "misc" file with "ro.securestorage.support=true" to obtain zip recovery for flashing original kernel back?
Hi
Yepp it should work this way.
So added to this kernel the latest NJ1 ramdisk. Download in OP.
hanspampel said:
So added to this kernel the latest NJ1 ramdisk. Download in OP.
Click to expand...
Click to collapse
Isn't NK1 the latest one? Or no difference as for kernel part?
Yepp your right. NK1 is the latest, but my rom uses the dbt where is NJ1 the latest. But the NG1 works on NJ1 FW too. So i think there is no real modification on samsung side. Beside there is no another update from sources for p605 available. So that means, is there a modification from samsungs side, then only in ramdisk. This is why i changed it to NJ1 one. Maybe there is one who knows.
hanspampel said:
Yepp your right. NK1 is the latest, but my rom uses the dbt where is NJ1 the latest. But the NG1 works on NJ1 FW too. So i think there is no real modification on samsung side. Beside there is no another update from sources for p605 available. So that means, is there a modification from samsungs side, then only in ramdisk. This is why i changed it to NJ1 one. Maybe there is one who knows.
Click to expand...
Click to collapse
OK, and what about latest P605XXUDOB1?
Hi, sorry for late reply. So there is no newer update of kernel sources available. Only changing of ramdisk of newer fws is possible. But nobody knows if there are changes between the fws.
So added to this kernel the latest OB1 ramdisk. Download in OP.
hanspampel said:
So added to this kernel the latest OB1 ramdisk. Download in OP.
Click to expand...
Click to collapse
Thank you very much for not forgetting this project!
Just installed it - works well!
Hi hanspampel....can you help me,to make usb otg and charge make possible on the p605. I have the lavalink adapter tl-002,but wont work. Must be a kernel thing......would be phantastic.....
Gesendet von meinem SM-N9005 mit Tapatalk
hanspampel,
are you going to continue your work for 5.1.1?
Official sources for the kernel are already published here.
Yes i know. But atm i have not a building system runnig. So maybe if i found some time to setup all the stuff, we can get a new kernel. maybe. Not now, not tomorrow.
I need a 4.4.4 that has SELinux set to permissive by default. I recently purchased the Pioneer AVIC-8000NEX and in order for me to have full touch control of my Note 3 on the radio, it needs to be set to permissive. I tried SELinuxModeChanger from the playstore but doesn't seem to work.
Has anyone tried ZION's kernel on freeza's 4.4.4 stockish ROM?
http://forum.xda-developers.com/note-3-sprint/development/rom-slimkat-remix-8-1-v1-0beta3-t2890759
I am wondering when freeza will release his 4.4.4 kernel...
I'm currently running:
http://forum.xda-developers.com/showthread.php?t=2472664
JayPee787 said:
I need a 4.4.4 that has SELinux set to permissive by default. I recently purchased the Pioneer AVIC-8000NEX and in order for me to have full touch control of my Note 3 on the radio, it needs to be set to permissive. I tried SELinuxModeChanger from the playstore but doesn't seem to work.
Has anyone tried ZION's kernel on freeza's 4.4.4 stockish ROM?
http://forum.xda-developers.com/note-3-sprint/development/rom-slimkat-remix-8-1-v1-0beta3-t2890759
I am wondering when freeza will release his 4.4.4 kernel...
I'm currently running:
http://forum.xda-developers.com/showthread.php?t=2472664
Click to expand...
Click to collapse
you can give this a try http://forum.xda-developers.com/showthread.php?p=55778723#post55778723 this is the LeanKernel thread check out post #2571 it is a test kernel v4.0 for NH7 and it is Selinux permissive. Or you can try here http://forum.xda-developers.com/showthread.php?t=2488082 then click on leanKernel other n900x devices: http://1drv.ms/1pXzyT1 then download Lk_hltespr_kk v3.10 it is also selinux permissive, and might work on 4.4.4 it is not a test kernel (stable).
jimzweb1 said:
you can give this a try http://forum.xda-developers.com/showthread.php?p=55778723#post55778723 this is the LeanKernel thread check out post #2571 it is a test kernel v4.0 for NH7 and it is Selinux permissive. Or you can try here http://forum.xda-developers.com/showthread.php?t=2488082 then click on leanKernel other n900x devices: http://1drv.ms/1pXzyT1 then download Lk_hltespr_kk v3.10 it is also selinux permissive, and might work on 4.4.4 it is not a test kernel (stable).
Click to expand...
Click to collapse
Flashed v4.0b1 and it set selinux to permissive. Thanks!
What rom are you running i flashed that same kernel and the phone would not boot. Any help would be great. I need a permissive kernel for my appradio 3
IFMISM said:
What rom are you running i flashed that same kernel and the phone would not boot. Any help would be great. I need a permissive kernel for my appradio 3
Click to expand...
Click to collapse
You flashed the leankernel 4.0 beta? That one is working great on my note running freeza's fre3 hybrid NH7. If you are on NC5, I believe 3.10 should work for you...anyone feel free to correct me.
Sweep2Sleep kernel module
This module allows you to sweep across the navigation bar at the bottom of the screen to put the phone to sleep.
This works with the stock kernel and requires SuperSU
The versions for 2.7 and 3.35 bases work with EX Kernel Manager. The settings are located at /sys/sweep2sleep/sweep2sleep
Download:
3.35 base (Marshmallow)
https://www.androidfilehost.com/?fid=24369303960689725
2.7 base
https://www.androidfilehost.com/?fid=24052804347765936
1.32 and 1.40 bases
https://www.androidfilehost.com/?fid=23991606952593922
Installation:
Flash in recovery
Options:
Sweep left, sweep right or sweep either left or right to put the phone to sleep.
Do it the easy way with EX Kernel Manager or edit /system/su.d/40s2s to change sweep settings
Manual usage:
insmod /system/lib/modules/s2s_mod.ko
Source:
https://github.com/flar2/m9-sweep2sleep
XDA:DevDB Information
Sweep2Sleep for HTC One m9, Kernel for the HTC One (M9)
Contributors
flar2
Source Code: https://github.com/flar2/m9-sweep2sleep
Kernel Special Features:
Version Information
Status: Testing
Created 2015-04-29
Last Updated 2016-01-20
Thanks @flar2 much appreciated mate?
Edit: confirmed as working with my kernel
Doesn't work on my att model tried fixing permissions to match other modules .. checked to make sure module was there and script was in init.d.. anything else o could try flar?
I haven't really used this, as I just built it this morning. Let me know about the usability. I may have to adjust the sweep distances and locations.
Johnny424 said:
Doesn't work on my att model tried fixing permissions to match other modules .. checked to make sure module was there and script was in init.d.. anything else o could try flar?
Click to expand...
Click to collapse
There are a couple things.
The module probably only loads with the kernel named 3.10.49-ga24f2d5. I didn't check to see if we need to match the kernel name or modversions. Either way, if there is an error on insmod, the solution is to hexedit the module, or recompile it against the specific source of the running kernel.
To test this, in terminal, type the following:
Code:
su
insmod /system/lib/modules/s2s_mod.ko
If there is an error, look at dmesg to see what the problem is.
The "stock" stock kernel does not have init.d support, so it will not load automatically. If you've verified above that the module loads, you can search around the forums for init.d solutions. Or if you have SuperSu, you can move the script from /etc/init.d/40s2s to /system/su.d/40s2s
Using your latest..will see if it's loading
Johnny424 said:
Using your latest..will see if it's loading
Click to expand...
Click to collapse
It probably doesn't load with my kernel. I installed the stock to test it since I figured most were using stock. I haven't had time to work on my kernel, but I have plans to add complete wake/sleep gesture support to it, hopefully this weekend.
Fair enough .. thanks
Thanks for this mod, and it works for MaximusHD 1.0.0 (3.10.49-g5c16a62)
412070391 said:
Thanks for this mod, and it works for MaximusHD 1.0.0 (3.10.49-g5c16a62)
Click to expand...
Click to collapse
Thanks for the confirmation. This tells me that if kernels are released where this doesn't work, the modversions CRC values will have to be hexedited to match the symbols in the kernel.
flar2 said:
Thanks for the confirmation. This tells me that if kernels are released where this doesn't work, the modversions CRC values will have to be hexedited to match the symbols in the kernel.
Click to expand...
Click to collapse
Confirmed working brilliantly on insert coin using LeeDroids kernel. Thank you immensely
Works great. Thx flar2!
flar2 said:
Sweep2Sleep kernel module
Click to expand...
Click to collapse
Cleverly written, excellently done!
Works just as nice indeed (compiled from your sources -- and a special thank for sharing them)!
Yet you had to strip the release version you supply with the zip, hadn't you?
It'd be 20 times smaller
flar2 said:
It probably doesn't load with my kernel. I installed the stock to test it since I figured most were using stock. I haven't had time to work on my kernel, but I have plans to add complete wake/sleep gesture support to it, hopefully this weekend.
Click to expand...
Click to collapse
Does this work with you 0.2 Kernel? Thanks in advance.
jollywhitefoot said:
Does this work with you 0.2 Kernel? Thanks in advance.
Click to expand...
Click to collapse
No, but 0.3 will have it built in
flar2 said:
No, but 0.3 will have it built in
Click to expand...
Click to collapse
Thanks
nice, this mod also works on 1.40.xxx.x based rom
delete
Check OP for a new module that works with the 2.7 base
The new module is compatible with EX Kernel Manager
New 2.7 base working great on VZW Android 5.1 - 2.6.605.10 base with stock kernel, no init.d support, but simply created the su.d folder and added the module in there and works as should, thank you kindly.
complied from https://github.com/therootlord/android_kernel_motorola_msm8953
not my code, just sharing because i keep seeing people complain about magisk mods
Features:
-F2FS bug fixed (can flash magisk modules on stock)
-not sure what else
Flash in twrp
TODO:
-kexec-hardboot
-disable force-decrypt
Stock NPS26.116-45 kernel zip: Link
This was my first kernel compilation, let me know if something isn't working
Extreme-Plus-Kernel-nrdgd-1.zip compiled on nov-18-2017 Link: Google Drive
UPDATE, just found out wifi doesnt work, sorry, been traveling and didnt think to test. everything else seems to work tho.
heres an older version of the kernel not compiled by me until i figure this out
UPDATE 2 - wifi fixed
Extreme-Plus-Kernel-nrdgd-2.zip compiled on nov-19-2017 Link: Google Drive
It boots with aex 7.x - to early to say more
Phazmos said:
It boots with aex 7.x - to early to say more
Click to expand...
Click to collapse
wifi doesnt work for me, let me know if its working on yours and which model you have if you can
until then check OP for older version of the same kernel
wifi fixed
Ae3NerdGod said:
wifi doesnt work for me, let me know if its working on yours and which model you have if you can
until then check OP for older version of the same kernel
wifi fixed
Click to expand...
Click to collapse
Didn't notice it was broken - us version here.
It booted, but was very slow and laggy, even did a system cache wipe....Then restoring the default boot.img had wifi not working....Just FYI for those who want to try...Do a backup
Is the only benefit to have magisk modules on stock rom? I have XT1806 rooted TWRP r9 Gladius Magisk 14.3 flashed this kernel but kept booting straight to recovery...had to do a full restore. I'm looking for custom kernels that provide speed and power benefits. Thanks
Would you mind sharing the build sequence/commands?
THERAJ12 said:
Is the only benefit to have magisk modules on stock rom? I have XT1806 rooted TWRP r9 Gladius Magisk 14.3 flashed this kernel but kept booting straight to recovery...had to do a full restore. I'm looking for custom kernels that provide speed and power benefits. Thanks
Click to expand...
Click to collapse
Just a note on kernels
I've tested many many kernels on many devices. When they are configured the same, performance/battery is about the same. Any difference was slight enough to be considered noise in the test methods. I always suggest to learn about kernel parameters then tweak it to the way you want. Any kernel will give more performance, or battery life, or anything between - all depends on how you configure it.
Ps - same device, same twrp, supersu instead of magisc, no problems. Except seems not compatible with ex kernel manager - it doesn't apply settings. I believe it doesn't set proper permissions to be able to write. But hey, it's young and a stockish kernel, hope to see more.
Phazmos said:
Just a note on kernels
I've tested many many kernels on many devices. When they are configured the same, performance/battery is about the same. Any difference was slight enough to be considered noise in the test methods. I always suggest to learn about kernel parameters then tweak it to the way you want. Any kernel will give more performance, or battery life, or anything between - all depends on how you configure it.
Ps - same device, same twrp, supersu instead of magisc, no problems. Except seems not compatible with ex kernel manager - it doesn't apply settings. I believe it doesn't set proper permissions to be able to write. But hey, it's young and a stockish kernel, hope to see more.
Click to expand...
Click to collapse
EXKM seems to work fine on AEX rom using the butterfly governor good battery life and smooth.
revengineer said:
Would you mind sharing the build sequence/commands?
Click to expand...
Click to collapse
i had to use his toolchain, and fix a few includes for it to work. im going to try different ones to try and figure out the lag, maybe thats not whats causing it but im new at this . been reading logs all day
smokinjoe2122 said:
It booted, but was very slow and laggy, even did a system cache wipe....Then restoring the default boot.img had wifi not working....Just FYI for those who want to try...Do a backup
Click to expand...
Click to collapse
yeah, sorry. new at this. dont know if @geneticengineer wants me passing his old kernels he hasnt posted around either. if you can find his afh, he has a really old one on there thats way faster. im still learning, im working on pulling the stock modules and kernel to make a back to stock zip rn actually will post soon if you keep using it, it speeds up a tiny bit lol
THERAJ12 said:
Is the only benefit to have magisk modules on stock rom? I have XT1806 rooted TWRP r9 Gladius Magisk 14.3 flashed this kernel but kept booting straight to recovery...had to do a full restore. I'm looking for custom kernels that provide speed and power benefits. Thanks
Click to expand...
Click to collapse
planning kexec hardboot and disable force decrypt when i get the hang of this.
Phazmos said:
Just a note on kernels
Ps - same device, same twrp, supersu instead of magisc, no problems. Except seems not compatible with ex kernel manager - it doesn't apply settings. I believe it doesn't set proper permissions to be able to write. But hey, it's young and a stockish kernel, hope to see more.
Click to expand...
Click to collapse
actually i think i missed something in defconfig that enables the secondary processor, im also going to switch toolchains, expect a new kernel in a few days
Here's a link to GeneticEngineer's AFH-hosted original kernel from the TWRP thread. I don't think he'll mind it being reposted in this thread. This should tide people over until you can iron out the bugs in your build.
https://www.androidfilehost.com/?fid=745425885120765462
Thanks for picking up the baton and running with it, incidentally. I did ask GeneticEngineer to create a thread for his kernel but perhaps he missed the message.
THERAJ12 said:
Is the only benefit to have magisk modules on stock rom? I have XT1806 rooted TWRP r9 Gladius Magisk 14.3 flashed this kernel but kept booting straight to recovery...had to do a full restore. I'm looking for custom kernels that provide speed and power benefits. Thanks
Click to expand...
Click to collapse
i actually get those weird reboot to recovery bugs all the time on this device and 2 things fix it, booting to bootloader and picking "start" or a full restore
I tried version 2. I still couldn't get it to pass Magisk SafetyNet. I also noticed that this kernel breaks fingerprint gestures.
bishop0114 said:
I tried version 2. I still couldn't get it to pass Magisk SafetyNet. I also noticed that this kernel breaks fingerprint gestures.
Click to expand...
Click to collapse
GeneticEngineer's original both passes SafetyNet and leaves fingerprint gestures functional on my otherwise stock single Sim EU version:
https://www.androidfilehost.com/?fid=745425885120765462
Loccy said:
GeneticEngineer's original both passes SafetyNet and leaves fingerprint gestures functional on my otherwise stock single Sim EU version:
https://www.androidfilehost.com/?fid=745425885120765462
Click to expand...
Click to collapse
Thanks. I tried it and still wouldn't pass SafetyNet. The fingerprint gestures worked though. I am running it on a secondary ROM. Maybe that is causing the issue?
Loccy said:
GeneticEngineer's original both passes SafetyNet and leaves fingerprint gestures functional on my otherwise stock single Sim EU version:
https://www.androidfilehost.com/?fid=745425885120765462
Click to expand...
Click to collapse
I've built a fully working stock kernel which has the needed commits for Magisk modules to work correctly and passes SafetyNet [emoji6]. Need to do some more updating (upstream) but I plan on posting it soon, probably new thread (Resurrected Kernel).
bishop0114 said:
Thanks. I tried it and still wouldn't pass SafetyNet. The fingerprint gestures worked though. I am running it on a secondary ROM. Maybe that is causing the issue?
Click to expand...
Click to collapse
A stock based kernel isn't gonna play well with custom ROMs, unless your secondary ROM is a stock ROM? I plan on creating one for cm-14.1+ based ROMs too.
Jleeblanch said:
I've built a fully working stock kernel which has the needed commits for Magisk modules to work correctly and passes SafetyNet [emoji6]. Need to do some more updating (upstream) but I plan on posting it soon, probably new thread (Resurrected Kernel). A stock based kernel isn't gonna play well with custom ROMs, unless your secondary ROM is a stock ROM? I plan on creating one for cm-14.1+ based ROMs too.
Click to expand...
Click to collapse
If you need someone to beta test it, let me know. It is the only reason I am not running stock.