well, i was clean installing Xperia STE CM 11 pepper ROM. I was already using the same earlier , but wanted to do a fresh install
Anyways, i entered TWRP, and Advanced WIPE everything , including sd-card, Android Secure , data, system , cache & alll .
well , then i thought after rebooting i would just flash the ROM. ZIP as usual, but my phone is now stuch at SONY logo, and i am unable to enter TWRP.
So i tried to fastboot boot.img , and it was successful , but still when i try to flash directly the ROM.zip , using
fastboot flash zip <rom.zip>
it sends , but then returns with an error
FAILURE <remote : Partition not found>
then i tried to use this recovery http://forum.xda-developers.com/xperia-u/sola-development/recovery-twrp-2-7-0-0-touch-recovery-t2683495
this returns me with error " daemon not running, starting it now on port 5037"
I also cant use ADB properly , my device isn't listed when i command adb devices
error : device not found.
( however lter on while doing the same via Flashtool , it does clarifies the reason that USB Debugging is turned off..so maybe that's why ADB is not working)
My laptop has win 7 , i double checked that i have all the necessary ADB and device specific usb drivers, and Under DEVICE MAnager Tab ,
so please tell me how to solve this...Android ADB Composote device is listed working properly.
So after that , i flashed this Kernel via fastboot Out Of desparation http://forum.xda-developers.com/xperia-u/sola-development/kernel-t2075093 [Sola] [CWM Touch] [6.1.1.B.1.54] [Unlocked Bootloader
and it worked , i mean i was able to enter CWM and navigate properly there, but i dont want to run stock firmware ICS again.
(also there i Explored my Internal SD Card , and it's completely empty)
So then i again flashed the boot.img from http://forum.xda-developers.com/xperia-u/sola-development/rom-cyanogenmod-11-t2743059 [ROM] [UB] [XperiaSTE] CyanogenMod 11
And well , the result is yet the same, my phone boots up and stays at SONY Logo, no LEDs flashing changing colors as it did earlier, and i cant enter TWRP , Neither can't i flash cm.11.0-12-pepper.zip via fastboot, it returns with error regarding messed up partitions.
also , i tried to explore/open Decompile the provided "boot.img" with PowerISo , ImgBurn , etc. and each says that the file is either damaged or corrupted.
MAYBE , that's the reason why me & many others aren't able to boot into recovery, there is something wrong with the boot.img of this rom , however i will try flashing Other ROM's Boot.img tomorrow.
I urge the developers to please look into that as you are our only saviors.
So my Questions now are
1. what should i do get a working CM 11 kk ROM for my device ?
2. Is my device Bricked ( because i am doubtful on that one, as i can connect it in fastboot as well as flashmode) ?
3. How to Create/repair the partitions , that CMD says are euther damaged or not found ?
4.Will flashing my stock firmware 6.1....54 , via FLashtool , solve all this & by solving i mean getting CM11 to work again . ?
PLease someone do reply , as i live in a remote town and i am all on my own completely. ThankS.
Try to use Xperia Sola AOSX ROM boot.img, then install cm11.
Try new version
Related
guys pls help,am a newbie don't know much about all these stuffs my phone is ....
xperia ray,rooted,bootloader unlocked without loosing DRM data ,currently on zellycream rom .ics
when am installing beanstalk rom in cwm recovery it show error like cannot install this zip file.and now stuck at sony logo cannot enter into cwm recovery .
before installing i tried to flash boot.img using flashtool it shows error (cannot do this in fastboot mode)so i tried some stupid method using cwm and later:crying::crying::crying:
realize its only for qualcom running device.
i cannot flash stock kernal in flash mode back button showing no response.
any body pls help :fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed: :crying::crying::crying:
ramkumarkr666 said:
guys pls help,am a newbie don't know much about all these stuffs my phone is ....
xperia ray,rooted,bootloader unlocked without loosing DRM data ,currently on zellycream rom .ics
when am installing beanstalk rom in cwm recovery it show error like cannot install this zip file.and now stuck at sony logo cannot enter into cwm recovery .
before installing i tried to flash boot.img using flashtool it shows error (cannot do this in fastboot mode)so i tried some stupid method using cwm and later:crying::crying::crying:
realize its only for qualcom running device.
i cannot flash stock kernal in flash mode back button showing no response.
any body pls help :fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed: :crying::crying::crying:
Click to expand...
Click to collapse
flash kernel usiing fastboot (not flashmode)
download this, then extract. (u need to have Android sdk installed, if not search google & install) http://www33.zippyshare.com/v/22861267/file.html
1. pur kernel into the fastboot folder
2. power off device. press & HOLD vol up button when u cannect to pc. the blue led should lit. leave phone
3. go back to fastboot folder click in empty space, then hold 'shift' & press right mouse button --> ''open console here''
4 now u should have a black box (cmd)
5 type ''fastboot flash boot boot.img'' (without quotes, & remeber the red text is the name of the kernel may u have to rename it)
6. fast boot should tell u all done, ok.
7. boot in CWM
ramkumarkr666 said:
guys pls help,am a newbie don't know much about all these stuffs my phone is ....
xperia ray,rooted,bootloader unlocked without loosing DRM data ,currently on zellycream rom .ics
when am installing beanstalk rom in cwm recovery it show error like cannot install this zip file.and now stuck at sony logo cannot enter into cwm recovery .
before installing i tried to flash boot.img using flashtool it shows error (cannot do this in fastboot mode)so i tried some stupid method using cwm and later:crying::crying::crying:
realize its only for qualcom running device.
i cannot flash stock kernal in flash mode back button showing no response.
any body pls help :fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed: :crying::crying::crying:
Click to expand...
Click to collapse
download flash tool and install it ...
switch off phone
connect the usb to pc and phone by holding volume up key NOW blue led light up...u can see flash tool notify that device connected in fastboot mode..
Now press the lighting key select fastboot ...then select kernel to flash...
DONE...
Note: phone driver must be installed
Hi everybody,
hope one of you can help me. cause i have no idea, what else i can do.
my problem is following:
i installed TWRP into my new ZUK Z1 to root it. than i wanted to install the CM nightlies on my phone and so i installed CWN. and than everything went wrong. first i made a backup of my system on CWN. and than i tried to install nightlies ROM and i got a error
"This package is for device: Z1; this device is jfltexx"
E: Error in /data/media/0/roms/cm-12.1-20151113-NIGHTLY-ham.zip
(Satus 7)
Installation aborted
than i thought i should restore my backup. and since than i have only a loop in the boot animation. i cant enter the COS.
even when i try to connect to my phone under windows 7 via adb i have a problem, cause even windows 7 thinks now, that my ZUK Z1 is a samsung (jfltexx is a samsung device)
so i thought i should give it a try in linux. in linux adb find my device but i cant enter fastboot to flash twrp back or the old system recovery.
what can i do now? cause i can enter CWN, i can use adb sideload but also adb push, but nothing else. is there any possiblity to install the twrp via CWN (cause i cant use fastboot).
hope you can help me, cause i need that phone soon
thx and greetings from vienna
Welcome dear xda_dev user,
Model:Prestigio Multiphone 5451 DUO
My device in the past months stuck in a boot-loop, and.. I googled for loads of threads to read,but they don't really help.
This is what the phone do, and not do:
Can/Works:
ADB sideload (PC see the device!)
Stock Recovery Menu
Can turn off/on the device,screen vibration,etc. works.
No/Not Works:
Can't listen to ADB while booting.
NO TWRP and other Recovery menus installed, only the stock android one.
NO official ROMs available from this company.
Click to expand...
Click to collapse
This is what I tried:
Tried to load 1-5Mb "firmware" updates via ADB Sideload /throwing permission problems/
Tried to Wipe data/cache /didn't boot after this/
Tried to unplug battery <- make it 0% (uncharge)
Tried to load non-company driven ROMs via ADB /permission problems/
Click to expand...
Click to collapse
NO official ROMs available from this company, I asked them to share, but they said I need to go a city (200km) away from me who have "authorized access"..
I kept this thread as simple as possible, BTW I have bought a new device, I still need this mobile because it still worth $50 I think..
Thank you if you can help, and ignore the grammar problems.
Not sure if these are legit firmware files for the duo but seeing you are in this fix it is worth a look i think
https://androidmm6.com/deviceinfo_1701.html
http://www.needrom.com/download/prestigio-pap-5451-duo/
Probably Scam/fake.
The file (rar) is locked via password and it's nowhere published, and it's only 1.65Mb so not really a ROM.
Anyways, I star you up for first and probably last replyer.
If you are able to sideload , then i think you can recover your phone in no time.
First I need you need to know that this procedure is complicated but You can recover your device.
go to mtkroms.com and Download any rom from there as per your wish.
-Remove boot.img from zip file and save it else where
-Sideload the rom
-After sideloading ,reboot device into fastboot by pressing power and both volume keys together until Boot Menu appears where you have the choice to Normal Boot , Boot into Fastboot(Bootloader) and Boot into recovery.
-Use Volume Down to navigate to Fastboot and press Volume Up (or Power button in some devices)
-After booting into fastboot , extract boot.img from .zip file to C:
-type in , fastboot flash boot "C:\boot.img"
-type fastboot reboot
If you are lucky , your device might boot (very slight chance to actually boot)
If it doesnt , no issues , this is where you show your skills as rom porter xD
You wont have access to Android OS , but after dalvik cache has been build , access to adb will be granted.
In the same above mentioned website , there is a tool which can port cwm for any mediatek device.
Download it in your PC , PC should not be windows 10 , Compatibility mode wont work.
Make sure you have Drivers necessary to proceed.
Use the tool and Click automatic porting and follow on screen option to Complete Porting recovery , once the recovery has been ported , reboot into recovery.
Now you will have complete access to adb without any problem.
Once you have a proper working recovery , with adb shell , do the following,
Code:
-adb shell
-df
-cat /proc/partitions
Once you have access to the mount points , you can start DeCompiling kernel and do the necessary changes in fstab
To decompile kernel , there are many tools for Windows and Linux
Google it , if you have any problem , PM me or reply back , I'll be happy to assist you
Yureka Yu 55110A bricked no recovery no fastboot bootloop
First i rooted my phone with king root i wanted to flash twrp in my yu yureka plus 5510a no idead what " A" stands for,
then i used flashify from playstore and downloaded the twrp by the official twrp and flashed it with the flashify and boom boot stuck with no recovery somehow removing battery and connecting the phone goes to the charging display from where i ablel to go in the fast boot, but then cmd was not able to identify adb devices nor the flashboot commands tried all the drivers adb drivers fastboot driver phone Coolpad drivers but no one helped
, so i decided to use a method of ygdp , much hopes with this file used ***** 5.1.153.00.P0.160604.8675_I02.def.CPB ******* dont know where the log file is but it was showing
old bootloader error
downloading error
and some other error and terminated at 2 % , then this one of your thread by unziping the official files and clicking on flash-all.bat file which ive provided img(1) "some trials with some "waiting devices error " message but then it just worked oem unlock and some lines of codes and then successful , tried to boot again but this time phone was automatically jumping into fastboot mode , then i finally tried one last time in that power shell thing by using cmd and applied fastboot code , even then was no devices was showing in powe shell (cmd)
, but then i used some different code something like "fastboot ix902 recovery " and i was able to install a real old twrp recovery . I did used some trial command of fastboot to check if device is even recognizing it or not.. and it wasn't but still flashing image worked ...... and able to reach at least cyanogen loading logo . But something I noticed was that yureka boot logo was changed I guess ygdp tool did something or maybe flash-all.bat
phone was showing the cyanogen loading ....but 15 min nothing ...but luckily recovery was working but dont know why the buttons setup used to go in fastboot mode were taking me in the recovery,, and the most important thing was fastboot was no longer acessable , so i downloaded latest recovery from your respected thread file named as " twrp-3.0.2-0-20160604-UNOFFICIAL-tomato.img " specified for 5501a yureka plus i wanted to install nougat aosp so i thought its a nice idea to update the recovery first so i did the normal recovery update from the recovery it self but then booom no recovery , no fastboot , tried all the combination and came up with this one volume+ vol- and power button shown in img(2) same as boot logo but a small "official" tag.
.
.
.
.
.
.
.
.
So in the sum up my phone isn't going booting. Not going in recovery no fastboot mode... Just the 8 sec boot loop with the Yu yureka logo and with all the buttons clicked it shows a small written official tag... Pls help I heard until it show something it have hopes one thing I want to mention it have removable battery and SD card slot so if u know any process it will be usefull but ...just please don't take time to reply on this thread. It not my phone I have to repair it soon. .
If image attachments arn't visible here is link
https://drive.google.com/file/d/1u429vKHkLkoFoS9aHkiyLWPSQVq8Ezph/view?usp=drivesdk
https://drive.google.com/file/d/1jF4PDG6aZDetVajJvbgZgXUnKjsoufUC/view?usp=drivesdk
https://drive.google.com/file/d/1fysp0Q5OGgFxXIMmkn2ajhpSS7XeX01s/view?usp=drivesdk
Hi People,
I hope I am putting this question in the proper location.
I have had several attempts ate flashing a new ROM to my device as it was the Chinese version & kinda useless to me not having Play store or several other APPs I want. I also wanted to try ROOT a phone for the first time.
I managed to get as far as getting ADB & fastboot working & TWRP installed on the device. The first ROM I had put in my file storage was corrupt so I tried the Lineage 17 version which "seemed"to install with a success message, but the phone would only boot into TWRP. so I tried the Havoc ROM from the thread in this site area. Same thing, would only boot into TWRP. Then I thought I would start over & install the factory ROM from: https://xiaomifirmwareupdater.com/miui/olivelite/stable/V12.0.2.0.QCPMIXM/ with ADB & fastboot. I got a success message from the MiFlash tool but the device is now saying the "MIUI verson cannot be installed on this device" in one screen from the Redmi-Recovery 3.0 menu that's now on it.
From here I can Reboot, wipe data or connect with MiAssistant. When I try MiAssistant (PC Suite) the phone does not connect to my PC but I can see the ADB device from device manager and ./adb fastboot devices shows a serial number -but connected as sideload if that makes a difference?
I hope I explained well enough to be understood. Is there anything I can do from here to get it working or is it fully stuffed?
Ur device's bootloader still unlocked?
T0B3R said:
Hi People,
I hope I am putting this question in the proper location.
I have had several attempts ate flashing a new ROM to my device as it was the Chinese version & kinda useless to me not having Play store or several other APPs I want. I also wanted to try ROOT a phone for the first time.
I managed to get as far as getting ADB & fastboot working & TWRP installed on the device. The first ROM I had put in my file storage was corrupt so I tried the Lineage 17 version which "seemed"to install with a success message, but the phone would only boot into TWRP. so I tried the Havoc ROM from the thread in this site area. Same thing, would only boot into TWRP. Then I thought I would start over & install the factory ROM from: https://xiaomifirmwareupdater.com/miui/olivelite/stable/V12.0.2.0.QCPMIXM/ with ADB & fastboot. I got a success message from the MiFlash tool but the device is now saying the "MIUI verson cannot be installed on this device" in one screen from the Redmi-Recovery 3.0 menu that's now on it.
From here I can Reboot, wipe data or connect with MiAssistant. When I try MiAssistant (PC Suite) the phone does not connect to my PC but I can see the ADB device from device manager and ./adb fastboot devices shows a serial number -but connected as sideload if that makes a difference?
I hope I explained well enough to be understood. Is there anything I can do from here to get it working or is it fully stuffed?
Click to expand...
Click to collapse
You should flash China factory rom, if you can.
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com