Guys , please help me...
The problem is that my power button has become way to sensitive and registers even the slightest pressure on it.
This causes the phone to lock up while using..
BUT THE REAL PROBLEM IS --> This causes the phone to reboot as the kay gets stuck in the pressed position ( long press of power button reboots the phone R8 ? )
please help me...
If you can suggest me how to disable the long press to reboot it would be really helpful..
even if you can point me as to which files are to be modified to reroute the function , I would get into it..
You cant disable it, it's done in hardware. The phone will reboot always if you keep pressed the power button, no matter if you are on recovery, download mode or normal mode.
The button must be replaced. Or you can try doing something like massage to the button by quickly pressing it hundreds of times with the battery off, for around 5-10 minutes, maybe it cleans the contacts a bit and the problem is solved.
You'll end tired, but luckly with a working phone. Or go to a repairing shop and tell them to replace the button.
Mine is also failing, for now it keeps going by pressing a lot of times when it fails, after a week or so it fails again. I'll replace it soon, no problem because I work repairing phones, it's not a hard or dangeours repair
Related
Hi All,
I have flashed EUViewPad 7 based on Stock rom. installed SD Card Booster, CPU Master and etc.
The flash is fine since I managed to boot it and install several apps.
Until I needed to reboot the device since the hacker keyboard always forces to close. I rebooted it and poof I am in infinite boot animation without a way to remove the battery. afraid to fiddle just waited the battery to drain so I can test again(This happened on my O1. just removed the battery, put it back and its ok)
I have drained the battery after almost 8 hours of non stop boot animation. But this device won't turn on anymore. It just vibrates when I press the on button.
Tried opening the back(crap I have scratched the back covering. now it has large scratches ) but the battery is taped . My question folks is what is the possible solution to my problem aside from removing the battery(can't even get to clockword recovery)
Thanks
Not too sure about your device, but doesn't yours have a reset button like the viewpad?
Should be a small hole on the bottom edge right next to the microphone.
Try pressing that with a paperclip if you're having boot problems.
Anyway, if you've drained the battery completely, make sure to leave it charging for a little while. Too low battery voltage will make it unable to start. 15 mins or so should be more then enough.
Try starting with both volume buttons + power pressed. Keep holding it until you see "entering recovery mode."
Let me know if this gives any results.
Amalgation said:
Not too sure about your device, but doesn't yours have a reset button like the viewpad?
Should be a small hole on the bottom edge right next to the microphone.
Try pressing that with a paperclip if you're having boot problems.
Anyway, if you've drained the battery completely, make sure to leave it charging for a little while. Too low battery voltage will make it unable to start. 15 mins or so should be more then enough.
Try starting with both volume buttons + power pressed. Keep holding it until you see "entering recovery mode."
Let me know if this gives any results.
Click to expand...
Click to collapse
Ahh I have that reset button beside the microphone hole. Will try this later on. Thanks for your help and for your custom rom
Uh oh... Tried pressing the small hall beside microphone, pressed on button. No luck. tried pressing that hole and on at the same time No luck again.
Is it possible that it will mess up the whole boot process due to boot animation loop??
silencer07 said:
Uh oh... Is it possible that it will mess up the whole boot process due to boot animation loop??
Click to expand...
Click to collapse
I'm afraid and it sounded like, from your descriptions, that the boot process has been messed up .... so, what do you got to lose by trying to "wake" it up or at least respond to commands, right ?
Try holding the power button & use a small pin to press RESET - leave it connected to the power supply/charging unit.
Try holding both volume Up & Down key & use a small pin to press RESET
Try holding both volume Up & Down key along with the Power button at the same time, and press RESET (you might want to get someone to help you to this)
Try holding the volume Down (left) key & Power button, and press RESET with a small pin.
Does any of these work in getting the screen to show life, be patient as you might have to hold it for 10 to 30 seconds before it cycle & restart/display the 3 birds ...
Chances are you will need to flash a stock ROM with the SULT3 utility, and then if successful, root it again & start over (carefully) - it might work or it might not even connect via usb at all .... worth a try, got nothing to lose at this point.
As a last resort, contact Cherry Mobile and get it repaired & sending it back to the shop .... check the warranty details in your locale, opening the rear case & exposing the battery, might or might not void your warranty coverage.
Hi Letiride,
I have tried the combinations you have specified but no avail. I can't boot this so my PC with correct drivers cannot even recognize i plugged this.
Is my Tablet already bricked?? I have bought this second hand so no warranty already.
Huhuhu Did I already have one of the "Vibrator" Android phone
silencer07 said:
tried the combinations but no avail. I can't boot this so my PC with correct drivers cannot even recognize i plugged this.
Is my Tablet already bricked?? .... bought this second hand so no warranty. (
Click to expand...
Click to collapse
Oh mine, no - if it won't power up or boot into Recovery or FTM mode, I'm afraid it's critical if not officially certified "paperweight". Try uninstalling your PC's usb drivers for the device, or use another computer & install SUTL3 utility from Viewsonic, and see if it can at least beep & signal some USB sequence loading the drivers.
Here's a link to Droid Explorer posted elsewhere in XDA (instead of pointing you to "Search" for it) Install it if you can get the yours powered on, but use it with care as it's a very "powerful" tool to explore all the hidden workings of the Android device(s).
http://forum.xda-developers.com/showthread.php?t=558108
My feeling is that the core image & boot file(s) were corrupted, damaged & overwritten, and it need to be reformatted & reflashed from a stock *.nb0 file, someone with adb might be able to - maybe, just maybe - rescue it.
Let's see if one of our fellow developers might have a better solution on where to begin b/c this is about as far as I can offer - well, you can always put on eBay for parts & hoped you didn't spend a lot as 2nd. hand.
Uhhh looks like i have no other choice but to have this repaired at service center and pay
Heey i have a problem with my power button. Had this problem before but it was gone after one day. The problem is my powerbutton isnt functionaly like it has to be. It changes from time to time.
Sometimes it doesnt work at all when i push the powerbutton.
Sometimes it works slowly. And when i have pushed te button couple of times, i get a phone with screen on, off, on off etc. Like it has lag or something.
When my powerbutton wasnt working yesterday, I saw that the button was pushed the whole time. I mean when you push powerbutton and homebutton you make a screenshot. If i only pushed the homebutton it was making a screenshot.
This things change from time to time. Any one got any ideas????
Im not even sure if its my button that is failing or it has to do something with software.
btw i already tried reflashing rom and kernel with no result.
thx in advance
It's the button, not the software that is the problem. Try taking off the back cover and cleaning out whatever dirt/lint that could be under the button.
i tried that already but it doesnt seem to work. Looks like i have to go back to stock rom for warranty. Hope this is going to be possible since my powerbutton isnt working.
Hey guys,
This is a possible fix for anyone who is experiencing all of the following issues. If you are NOT experiencing all of these issues then my fix is most likely not the cause of your problem.
1) Can't boot into ROM (phone will get no farther than GALAXY S III logo)
2) Can't boot into RECOVERY (phone will try to boot into recovery but will never make it)
3) Can't boot into DOWNLOAD (you may get as far as the caution screen but phone will turn off)
4) Phone starts, then turns off after about 3 seconds.
The solution that worked for me involves the power switch. It turns out that the reason you are unable to boot is because your power button is constantly being pressed due to a "sticky" button. This is a hardware flaw with only a temporary solution.
Steps to FIX issue.
1. Use fingernail to gently remove POWER BUTTON from phone. Notice that the bumps in the middle of the button are a little off-center.
2. Use a pair of fine tip tweezers to gently PULL on the yellowish/white POWER SWITCH inside the phone.
3. Test the fix by reinserting the battery. If the phone doesn't auto boot then press the POWER SWITCH with the end of your tweezers.
4A. If phone continues to power cycle then return to step 2.
4B. If phone properly boots then reinsert the POWER BUTTON with bumps in the middle aligned with the POWER SWITCH. If you don't align the bumps then the button will not function properly.
Once again, if this fix did not work for you then your problem is most likely in software (bootloader) and not hardware.
Hope this helps someone. Cheers!
Nice to see someone posting something new, glad it worked for you. It would be a good idea to put a caveat that the fix may invalidate a warranty that would otherwise replace the power switch free of charge
The sticky power button will apply to relatively few and though a last chance fix noway round the fact that the phone will fail warranty .
Probably worth trying for those with constant reboots .I would personally try to hold the power button out first if i thought that was the problem .
Hello guys, I'll try to be as brieff as possible:
My cousin has a SGS3, which suddenly started showing the power options screen (when you long press power button). Now his phone restarts on its own every time. When you insert the battery, it turns on by itself. If you try to access download mode or recovery mode, it does it but restarts again. I read it may be the power button is not working properly, but I dissassembled the phone and the switch is works normally (it's not broken, either stuck). I read several solutions about clearing cache and stuff, but it just keeps restarting! Like if someone were pushing the powerbutton every time. Btw, he discovered he can turn the phone on and actually stop the phone from restarting if he continously presses the power button and menu button alternatively without stopping (which is useless). When he stops doing that, 3 secs later, it restarts again. Any suggestions?
It's a hardware fault, did you test the button with a meter?
If yes then something else is shorted, to power on when the battery is inserted.
Sent from my GT-I9300 using Tapatalk
Ah, so this is merely hardware. I did not test it, but now it seems clear something is wrong on the inside (which, unfortunately, I cannot help with). Thanks mate!
Wifes phone does nothing but restart its self, I need to get her pictures off her phone. I pull the battery out and as soon as I put it back in the phone boots, sometimes will boot all the way but always restarts itself. Anything I can do to get the pictures off this phone? Phone is not rooted. Thanks.
anyone?
Your power button is probably broken or dirty. The latter is a very easy fix. Disassemble your S3 and clean the power button with alcohol. It will remove any kind of dirt thats around your power button which makes it restart all the time ( I had the same problem). If your button is actually broken, you need to remove the power button (There are a few videos on youtube that will guide you through both procedures). I hope it helps.
Links to videos: ----youtu.be/fI_hTPLzW28 (cleaning with alcohol)---
youtu.be/3Glllc7bEJs (button removal)