Related
Just wanted to see if anyone has any of the Case Mate series cases for the Evo 3d? I was thinking about getting the Tough case, but from a video review on youtube, the case apparently has a random port on the bottom...
http://www.youtube.com/watch?v=mskLfmXEh0Y
Where I have found them online:
http://www.mobilecityonline.com/wireless/store/productdetail.asp?productid=28094#section10
http://www.wirelessground.com/htc-e...3d-case-mate-tough-case-black&channelid=FROOG
Currently have the Defender, but DAMN its bulky
I will never buy another case mate again
Sent from my Nexus S 4G using XDA App
mattfmartin said:
I will never buy another case mate again
Sent from my Nexus S 4G using XDA App
Click to expand...
Click to collapse
Please fill me in lol
i have a casemate and i have been using this badboy since sept! i use this on my evo 4g over my seidio rugged! and i am rough on my ph and dropping it and this casemate is tough! also slides in and out of a pant pocket real good!
Sent from my PC36100 using XDA Premium App
HTCRALEIGHFAN said:
i have a casemate and i have been using this badboy since sept! i use this on my evo 4g over my seidio rugged! and i am rough on my ph and dropping it and this casemate is tough! also slides in and out of a pant pocket real good!
Sent from my PC36100 using XDA Premium App
Click to expand...
Click to collapse
Maybe I will have to reconsider, I would still like to see some more people weigh in. I have the OB Defender right now, and its excellent protection wise just a bit bulky...
The convert from seidio/BB is pretty awesome two good cases plus a nice clip. This is until I can get the ballistic case
Sent from my PG86100 using Tapatalk
I have the Tough Case, just delivered today. It's similar in design to the Otterbox Commuter -- a thin silicone base layer covers the entire phone, while a hard plastic shell snaps around the back, sides and corners.
Pros: The fit is absolutely perfect. The silicone layer over the buttons is just the right thickness -- the power, volume and camera buttons are all covered, but their function is not impeded in the slightest. I was particularly delighted by how well the camera button works, no interference with function or sensitivity at all.
Around the front edge, the silicone layer rises a few millimeters above the screen, so you can comfortably place the phone face down without worrying about scratching the glass. Similarly, the camera lenses and flash are deeply recessed on the back, with perfectly sized openings around each (which, IMO, is how the lenses should've been on the phone itself). You can drag your phone across concrete with no worries, if that's the kind of thing you're into.
The hard plastic outer layer has a smooth matte coating that makes it feel more like silicone than hard plastic, giving it a very nice feel in the hand. It's also covered with a raised, textured pattern, making the phone very unlikely to slip out of your hand. By contrast, the Otterbox Commuter I briefly had on my Hero had a plastic outer shell that was slick and shiny, and the phone slipped out of my hand twice within the two days I left it on (which is why I used it only briefly).
Cons: My only real complaints are aesthetic. I really like the slim, refined look of this phone, and the grippy, textured, matte black surface of this case, while very protective and easy to hang on to, is a tad inelegant, giving the phone more of an industrial feel. It also adds a bit of bulk, which was immediately noticeable when I pocketed the phone with it on (although I will say it's positively svelte compared to some of the other cases I've seen pictured on this forum). The phone does also feel noticeably heavier with this case on.
In response to the OP, the case does have a couple of mysterious ports at the bottom. One lines up with the slot you use to pry the battery cover off, while a smaller one lines up with a tiny hole just to the left of the other (edit: duh! that's the mike, thanks minieod). I don't know why those are there, but they don't do any harm.
Overall, I'd say thumbs up. If you like the basic design of Otterbox cases but want something slimmer than the Defender and easier to hold than the Commuter, this is probably your best choice.
I have the casemate "barely there" case on my OG Evo. I have been using it since shortly after launch and it has been just the right amount of protection without adding a lot of bulk. I keep my phone in a pocket with nothing else so that case helps with day to day wear and more importantly it makes it so the camera glass doesn't touch the table when the phone is laying on its back.
I am thinking of picking up an Evo 3d for my girlfriend in order to replace her dying palm Pre but she is pretty rough on phones. She drops hers a lot and throws it in her purse with keys and change and stuff. The thought of getting her a "glass slab" style phone frightens me. I will probably pick up a barely-there case for the Evo 3d if I get it for her. It's weird that they don't list them on their site but that mobilecity site seems to have them in a few colors for $15. That's a good price IMO and my last one came with a free screen protector. Hopefully that will be enough to protect her phone.
I guess I can also cancel the insurance on my Evo and move it to her 3d if I get it since my account is due for upgrade and hers won't be for two years if i get her the 3d.
po96od said:
The case does have a couple of mysterious ports at the bottom. One lines up with the slot you use to pry the battery cover off, while a smaller one lines up with a tiny hole just to the left of the other. I don't know why those are there, but they don't do any harm.
Click to expand...
Click to collapse
that "mysterious hole" on the left of the phone you'll want to remain uncovered --- unless you'd rather not talk to anyone ---- thats the microphone
other than that i totally agree with you on the case - i got it at the sprint store and i LOVE it
i had the TPU case from the user who posted on here earlier in june (forgot your username sorry!) and sold them on tpu-cases.com or something like that... it was 8 bucks shipped, and great quality for tpu
but i tried this on when i was waiting at the store picking up my moms evo3d for her bday gift.... and decided to get the case-mate tough, and give her my tpu one
the casemate tough is sleek....i dont agree with po96 on the "inelegant" , because its pretty similar to the style of the battery cover on the 3d....
i like it a lot, and it feels very solid and protected....
i used to use the otterbox commuter on my evo4g and loved it, but i really hated the new design for the 3d....
minieod said:
that "mysterious hole" on the left of the phone you'll want to remain uncovered --- unless you'd rather not talk to anyone ---- thats the microphone
other than that i totally agree with you on the case - i got it at the sprint store and i LOVE it
i had the TPU case from the user who posted on here earlier in june (forgot your username sorry!) and sold them on tpu-cases.com or something like that... it was 8 bucks shipped, and great quality for tpu
but i tried this on when i was waiting at the store picking up my moms evo3d for her bday gift.... and decided to get the case-mate tough, and give her my tpu one
the casemate tough is sleek....i dont agree with po96 on the "inelegant" , because its pretty similar to the style of the battery cover on the 3d....
i like it a lot, and it feels very solid and protected....
i used to use the otterbox commuter on my evo4g and loved it, but i really hated the new design for the 3d....
Click to expand...
Click to collapse
PMed you, guess you might not have noticed. Anyways has anyone else seen these in a Sprint Store? I didn't see one at mine but maybe he was at a non-corporate store?
#Winning# said:
PMed you, guess you might not have noticed. Anyways has anyone else seen these in a Sprint Store? I didn't see one at mine but maybe he was at a non-corporate store?
Click to expand...
Click to collapse
hey sorry, my PM notifications are not working i guess
i am going to take some pics of mine now and post here
(note: these pics were taken on an Evo3D)
http://imgur.com/a/cCdel
neodorian said:
I guess I can also cancel the insurance on my Evo and move it to her 3d if I get it since my account is due for upgrade and hers won't be for two years if i get her the 3d.
Click to expand...
Click to collapse
get the 3d on her plan...swap the 3d to your number, and your evo to hers....at that time you both have two new activated phones...both are now eligible for the TEP
also, now you will have a 3d
minieod, nice pics. I was meaning to post some, but you were way more completist about it than I would've been.
The mystery hole at the bottom is for a lanyard.
i wish it would come with a holster
Phreddo said:
The mystery hole at the bottom is for a lanyard.
Click to expand...
Click to collapse
lol
no...its the microphone...when your mouth makes noise, that noise goes into that hole
po96od said:
I have the Tough Case, just delivered today. It's similar in design to the Otterbox Commuter -- a thin silicone base layer covers the entire phone, while a hard plastic shell snaps around the back, sides and corners.
Pros: The fit is absolutely perfect. The silicone layer over the buttons is just the right thickness -- the power, volume and camera buttons are all covered, but their function is not impeded in the slightest. I was particularly delighted by how well the camera button works, since the TPU case I was initially using basically disabled it.
Around the front edge, the silicone layer rises a few millimeters above the screen, so you can comfortably place the phone face down without worrying about scratching the glass. Similarly, the camera lenses and flash are deeply recessed on the back, with perfectly sized openings around each (which, IMO, is how the lenses should've been on the phone itself). You can drag your phone across concrete with no worries, if that's the kind of thing you're into.
The hard plastic outer layer has a smooth matte coating that makes it feel more like silicone than hard plastic, giving it a very nice feel in the hand. It's also covered with a raised, textured pattern, making the phone very unlikely to slip out of your hand. By contrast, the Otterbox Commuter I briefly had on my Hero had a plastic outer shell that was slick and shiny, and the phone slipped out of my hand twice within the two days I left it on (which is why I used it only briefly).
Cons: My only real complaints are aesthetic. I really like the slim, refined look of this phone, and the grippy, textured, matte black surface of this case, while very protective and easy to hang on to, is a tad inelegant, giving the phone more of an industrial feel. It also adds a bit of bulk, which was immediately noticeable when I pocketed the phone with it on (although I will say it's positively svelte compared to some of the other cases I've seen pictured on this forum). The phone does also feel noticeably heavier with this case on.
In response to the OP, the case does have a couple of mysterious ports at the bottom. One lines up with the slot you use to pry the battery cover off, while a smaller one lines up with a tiny hole just to the left of the other (edit: duh! that's the mike, thanks minieod). I don't know why those are there, but they don't do any harm.
Overall, I'd say thumbs up. If you like the basic design of Otterbox cases but want something slimmer than the Defender and easier to hold than the Commuter, this is probably your best choice.
Click to expand...
Click to collapse
So sounds like you like it better than the Otterbox. I am currently using the Commuter and love the feel of it (didn't feel slippery to me, has a nice texture) but hate the gap at the top. I am getting a new silicone layer from Otterbox to see if that one fits better. I think I might order the Tough Case as well and compare the two. Overall would you say its thinner than the Commuter?
I wish I could find the Tough Case in stores to give it a test before purchasing. I hate having to buy online and pay return costs for shipping if I don't like it but I guess that's what I'll have to do.
*update* Just ordered a Tough Case. There is a 20% off code for their online store: CM06-SP20. The online store has free shipping to US addresses and didn't charge me tax, so $28 total for the tough case (originally $35). Not bad! If I don't like it I can just pay return shipping. I might just keep it for a backup.
mrazzino said:
So sounds like you like it better than the Otterbox. I am currently using the Commuter and love the feel of it (didn't feel slippery to me, has a nice texture) but hate the gap at the top. I am getting a new silicone layer from Otterbox to see if that one fits better. I think I might order the Tough Case as well and compare the two. Overall would you say its thinner than the Commuter?
I wish I could find the Tough Case in stores to give it a test before purchasing. I hate having to buy online and pay return costs for shipping if I don't like it but I guess that's what I'll have to do.
*update* Just ordered a Tough Case. There is a 20% off code for their online store: CM06-SP20. The online store has free shipping to US addresses and didn't charge me tax, so $28 total for the tough case (originally $35). Not bad! If I don't like it I can just pay return shipping. I might just keep it for a backup.
Click to expand...
Click to collapse
eep - its on amazon for $30 + free shipping (which is free returns)
Anyone know if either the tough case or the barely there case will fit into the belt holster for the Seido Surface case(aka the plaitunum case at Best Buy)?
I'm currently using a TPU case in the Platinum holster because I like the added camera area coverage of the TPU case. I just hate the camera button covering of the TPU case.
The Case Mate cases look great but I really need a belt clip with them.
the wifes casemate shipped yesterday and will be here this weekend ill toss up pics
Sent from my PC36100 using XDA Premium App
Looking to get a new case and was hoping to hear some opinions from those of you with cases or whom have had a chance to try a few out. I currently have the D30 flex protective cover from T-mobile (black and for sale if anyone wants it 10$ no drops). I really like the D30 material and have enjoyed their past products but my girlfriend's phone just broke (not using D30, but it got me thinking). Given that the Amaze is a heavier phone and the glass sticks out so much I feel I should step up the protection on this phone to prevent knicks on the bottom two corners that could potentially cause cracks. I've looked around at a few cases and have narrowed it down to a few.
-Trident Kraken AMS Case w/ Holster for HTC Amaze 4G, Blue
-Ballistic Case for HTC Amaze 4G / Ruby
-HTC Amaze 4G Tough Cases
(If I'm missing some amazing case let me know)
Price really isn't a factor, they are relatively the same price, and in the end it is a good idea to get something that will work and last in the sense of protecting an investment.
Only issues I have heard of but have not found anything concrete to go off of have been:
-Covering of rear holes (Receptiom, WiFi, noise cancellation; although I don't think I'd mind making them myself if I decided strongly on a case without them)
-Inaccurate fitment (as in the hard part of the case falling off easily or likely on impact)
-Thickness leading to lack of efficiency (no more pocketing, bricklike, etc)
-Magical Lint magnets (need I say more?_
Give me your thoughts and opinions if you'd like, or make a "case" for a case.
Thanks in advance!
Bump Bump Bump
I'm going to go ahead and make my 1st post. This is a good thread. I think you have a general idea of the best case for the Amaze already. You want to make a smart purchase, and not buy something only to find out next week what you really wanted is just posted. My advice would be make the best decision based on the facts you have already stated; keep us up to date, let us know the pros and cons. Then if anyone else makes a thread like this we can always link them to this post. As it is already quite informative
Sent from my HTC_Amaze_4G using XDA App
tpu case is the best for me... for my sensation and in a week , to my amaze as well..
Sent from my HTC Sensation XE with Beats Audio using xda premium
I have a Trident Aegis case for my Amaze and let me say, it kicks ass. The screen protector that comes with it really blows but I just put on a Invisible Shield instead. Even though the case isn't the most protective one that Trident produces, my phone feels really secure in it. Its not much of a lint magnet, but it attracts cat hair like none other lol It has covers for the charge port and headphone jack. The only problem is that if you don't have any finger nails, the charge port cover is hard as hell to get out. It fits in a pocket decently as long as you're not wearing tight ass jeans. I feel like my phone is rather protected and I'm rather impressed with it. I highly recommend it.
I got mine from eBay (shipped from California) and it is cheap and good quality. The case case and screen protectors (a few of them) are just a few bucks.
Just my opinion but I hope it helps.
I gut the Trident kracken in rd d silicone.. silicone kicks ass the hard plastic fits good..
no lint problems.
Needed to drill the ambient light and noise holes myself for a big improvement...
Also the belt clip thing is good but I don't like it over the screen face...if it breaks that will be some nasty jagged plastic directly jamming into my touch screen..
I am very confident my phone will be safe in this case on my construction job sites
I wish it had a hinged door like screen cover...I had that years ago on a compaq PDA... Worked great as a stand too
Sent from my HTC Amaze 4G using xda premium
I have tmobiles D3O impact protection case. I've dropped my phone a few times now and its still in perfect condition. It's also not very bulky either.
Sent from my HTC_Amaze_4G using xda premium
I really like my body glove case w/ kickstand. If not, the Amzer TPU cases is high quality case too. If you're looking to get a TPU case, look for Amzer cases...you won't regret it.
I bought this TPU case on eBay when I first bought the phone. I love it and it is cheap. It is really durable for the phone. Best $2.50 investment I ever made lol
Edited by Moderator: [ebay link removed]
Posting links to external sites such as ebay and craigslist is prohibited. Please take a few minutes to read the rules. Understanding them will avoid problems in the future.
Loving my Ballastic case! Thing makes it like a tank, but I am fine with that. I know I will be okay if I drop it. Best 20 bucks I have spent for this phone!
Sent from my HTC_Amaze_4G using Tapatalk
what do you guys think of this?
http://www.daydeal.com/product.php?productid=64424
Got The Trident Kraken AMS Case w/ Holster (Red)
As you can see in The Pictures Your Phone will look like a heavyweight worry-free drop device.. it has a nice kick stand which will easily break for overtime used but perfect angle as well when in viewing/watching mode..
Will do further review if ever..
am i the only man that swears otterbox kick all the other cases into obscurity? Bit more pricey but hell you have a £400+ device so whats a few brown backs extra to keep it proteced, plus it looks great!
gumshield said:
am i the only man that swears otterbox kick all the other cases into obscurity? Bit more pricey but hell you have a £400+ device so whats a few brown backs extra to keep it proteced, plus it looks great!
Click to expand...
Click to collapse
I think otterbox for the amaze will not be made or they are planning to due to the fact that the amaze is not a all rounded carrier phones, i think Telus and T-Mobile only carry them as for now and rumor has that the Amaze 4g from T-Mobile will be pulled out because it is not selling well on T-Mobile Everyone get's the GS2 because of the bigger screen.. And as i ask one of the sales rep's in T-Mobile they will be releasing a Samsung Galaxy Note Next Year.. hope it's true or she is not shtn me...
honestly i woldnt even think about buying the kraken since it has clips and would brake whenever you drop it. i would really recommend you to get the aegis trident case since in my opinion is more solid than the kraken.
trident kraken
Ive had the trident aegis and the ballistic sg series and the trident kraken. The trident kraken is the best one I've found so far....as far as a case that protects everything...that's easy they don't exist lol. The kraken has dust covers and a nice fit and a belt clip..but the screen protector sucks..no protection for the camera...the dust plugs are a pain to get out...and the belt clip protects nothing when attached (but the back does face out) it covers about one sixth of the phone and is a pain to get on and off.....but i think its the best option as I think t Mobile pissed someone off or something bc no one is making a supremely awesome case for the amaze.. I've looked for sometime now...
tylr0drdn said:
Ive had the trident aegis and the ballistic sg series and the trident kraken. The trident kraken is the best one I've found so far....as far as a case that protects everything...that's easy they don't exist lol. The kraken has dust covers and a nice fit and a belt clip..but the screen protector sucks..no protection for the camera...the dust plugs are a pain to get out...and the belt clip protects nothing when attached (but the back does face out) it covers about one sixth of the phone and is a pain to get on and off.....but i think its the best option as I think t Mobile pissed someone off or something bc no one is making a supremely awesome case for the amaze.. I've looked for sometime now...
Click to expand...
Click to collapse
So did you not like the Ballistic? I think that it would have great protection and not make the phone as bulky as the Kraken. And it already has the holes cut around the camera.
Getting the ballistic case should arrive next week. Will post back when I get it.
Initial impressions are that it looks like it can survive a fall and has all the ports covered and looks nice. Also it has the 3 holes cut out from the back around the camera that the trident doesn't have. Doesn't seem too bulky either.
Hello friends,
I thought I'd share some thoughts on the four cases I have for my Note 3. They are, from left to right: A Samsung view case which came with my phone, a Wave case by Mob:C, a Neo Hybrid case by Spigen, and a Slim Armor case also by Spigen.
First, the flip/window case. This was free when I bought my phone in Korea. It has a window and finger grooves on the side. I'm fairly certain it's an official Samsung product, but it's not very good. I only used it for about three days before buying a new case, and I noticed the following:
1. The window was already very scrathed and didn't look very good.
2. The case didn't stay shut that well.
3. The finger groove design makes it difficult to put into and remove from the pocket.
4. The build quality isn't very good. The case feels cheap and fragile.
5. It's also not a smart flip case. Would not recommend.
The second case, called the Wave by Mob:c was the first non flip case I found In Korea. I liked the drop protection this case offered, but the enormous rubbery bumpers also added a significant amount of girth to the phone. I also liked the deeply recessed camera cutout, which kept the camera well away from tabletops. The s pen cutout is also very generous, allowing for easy access. Things I dislike about this case are as follows:
1. The wave shape is perhaps intended to make the phone fit the hand better, but in reality it seems to make it worse, possibly because it makes the phone so wide.
2. The wave shape, like the fingergrooves on the flip case, tends to make this case get hung up on pockets when going in or coming out.
3. The bezel around the screen is quite shallow, making it dangerous to set the phone down face down.
This case is alright overall, but I can't really recommend it unless you're in love with the shape.
The third case is the well known Neo Hybrid from Spigen. This case arrived at the same time as the Slim Armor, as I liked both designs but wasn't sure which I'd prefer. This case is very slim and therefore doesn't feel like it would offer much protection. It's also a bit slick in the hand. The only other thing I'm not crazy about with this case is the very low bezel on the screen and the very shallow recess for the camera. It didn't offer the protection I wanted, but I still think it's an attractive design and will work perfectly for those looking for a trim case that still offers a bit of protection.
Lastly, my favorite of the four, the Slim Armor. Things I like about this case include the just deep enough bezel, the just deep enough camera recess, and the rock solid feel in the hand. It honestly feels like a suit of armor for your phone, and while it doesn't appear to offer the maximum protection you'd get from the Otterbox or similar designs, I'd still trust it to save the phone from a realistic drop. Things I don't like about it: it's quite slick in the hand, and the buttons aren't quite as easy to use as they are on the naked phone or with the other cases.
Overall, I'd highly recommend this case. The feeling in the hand is just fantastic, and the case is attractive but still minimalist.
Hope you enjoyed these mini reviews, thanks for reading.
Sent from my SM-N900K using Tapatalk
I am using the slim armor myself in slate. Absolutely love it. I also tried the neo and wasn't impressed. The outer ring didn't fit properly and the overall feel in the hand wasn't for me.
Sent from my SM-N900V using xda app-developers app
The slim armor in my opinion is hell to put on I have the white and black one
Sent from my SM-N900T using Tapatalk
troyd28 said:
The slim armor in my opinion is hell to put on I have the white and black one
Sent from my SM-N900T using Tapatalk
Click to expand...
Click to collapse
I have the Slim Armor on my N3 right now in white. The fit and finish is at a very high level. The protection seems about right for normal use. It is an impressive case. Very solid and polished. But, I am not sure I am going to be able to continue to use it for two reasons. First, it is slippery. Common sense tells me I am going to drop this case more often and that just does not make sense to me. Second, the power button takes an effort to push and that is annoying because you are always using it. I could probably live with the buttons, but worrying about dropping the phone is a deal breaker for me. My last case was the CruiserLite on my Note 2. I used that case for a year ... very grippy with texture on each side ... dropped it one in a year of use. I've tried the CruiserLite for the Note 3, but it did not fit well and I returned it.
Any suggestions on a grippy case for the Note 3?
UCSB said:
I have the Slim Armor on my N3 right now in white. The fit and finish is at a very high level. The protection seems about right for normal use. It is an impressive case. Very solid and polished. But, I am not sure I am going to be able to continue to use it for two reasons. First, it is slippery. Common sense tells me I am going to drop this case more often and that just does not make sense to me. Second, the power button takes an effort to push and that is annoying because you are always using it. I could probably live with the buttons, but worrying about dropping the phone is a deal breaker for me. My last case was the CruiserLite on my Note 2. I used that case for a year ... very grippy with texture on each side ... dropped it one in a year of use. I've tried the CruiserLite for the Note 3, but it did not fit well and I returned it.
Any suggestions on a grippy case for the Note 3?
Click to expand...
Click to collapse
I have about 5 case for my phone right now so far this spigen is the 1 that would slip out hand the most but I haven't broke it yet then I have the knock off griffin case that has protection and has grip and it's kind like the otterbox then I have some cheap 9$ one I won on a ebay bid then I have the blason one which has alot of grip then I have a caseology one but the spigen is semi tough because I dropped it once on tile floor the knockoff griffin is pretty touch I dropped it while biking on pavement and it survived surprisingly because the case was 10$ from Japan
Sent from my SM-N900T using Tapatalk
In short, I am extremely disappointed in this case and feel ripped off for having to paying $30 for a case that is worth, at MOST $5.Pictures: http://imgur.com/a/jYJuw#0
Pros:
Visually attractive at a glance.
Buttons do work.
Case leaves enough room for large headphone plugs to fit with ease.
Although I do not have a magnetic charger, there appears to be plenty of room for it to fit as long as the adapter isn't too wide.
Cons:
Bumper is plastic and very flimsy. I fully except it to shatter if my phone is ever dropped.
Extremely overpriced for the quality of case provided.
Buttons feel cheap (I can't believe they are metal), are loosely fitted, meaning they rattle when phone is shook.
The part of the bumper closest to the screen that surrounds the USB port and magnetic charger is very very fragile and can be moved almost to the point of snapping without much effort.
After picking up my T-Mobile Z3 on Wednesday I quickly went online to find a case to protect my phone. I was very much disappointed to find that there are hardly any quality cases available, especially in the US. After researching a bit, it seemed like Case-Mate was the best option there was and I put in an order for the Slim Tough.
My case came today (Saturday) and after using it for a few hours I have written this review.
If you have any questions, please ask.
ChristianBale said:
In short, I am extremely disappointed in this case and feel ripped off for having to paying $30 for a case that is worth, at MOST $5.Pictures: http://imgur.com/a/jYJuw#0
Pros:
Visually attractive at a glance.
Buttons do work.
Case leaves enough room for large headphone plugs to fit with ease.
Although I do not have a magnetic charger, there appears to be plenty of room for it to fit as long as the adapter isn't too wide.
Cons:
Bumper is plastic and very flimsy. I fully except it to shatter if my phone is ever dropped.
Extremely overpriced for the quality of case provided.
Buttons feel cheap (I can't believe they are metal), are loosely fitted, meaning they rattle when phone is shook.
The part of the bumper closest to the screen that surrounds the USB port and magnetic charger is very very fragile and can be moved almost to the point of snapping without much effort.
After picking up my T-Mobile Z3 on Wednesday I quickly went online to find a case to protect my phone. I was very much disappointed to find that there are hardly any quality cases available, especially in the US. After researching a bit, it seemed like Case-Mate was the best option there was and I put in an order for the Slim Tough.
My case came today (Saturday) and after using it for a few hours I have written this review.
If you have any questions, please ask.
Click to expand...
Click to collapse
Wow this is extremely disappointing I was really looking foward to getting mine on Monday. Do you feel it is at least better protection then the Ringke Fusion (as I know you have that too. It is such a shame a nice phone like the Z3 has such limited case options.
dsf767 said:
Wow this is extremely disappointing I was really looking foward to getting mine on Monday. Do you feel it is at least better protection then the Ringke Fusion (as I know you have that too. It is such a shame a nice phone like the Z3 has such limited case options.
Click to expand...
Click to collapse
I actually do not have the Ringke Fusion so I cannot make a proper comparison.
I do know that the rubber TPU on this case is the best part and offers good protection against scratches and light bumps. It also would offer the most protection against a drop as it would absorb most of the impact. The bumper (which keeps the TPU on), on the other hand, will offer no protection and will likely shatter or break upon impact.
dsf767 said:
Wow this is extremely disappointing I was really looking foward to getting mine on Monday. Do you feel it is at least better protection then the Ringke Fusion (as I know you have that too. It is such a shame a nice phone like the Z3 has such limited case options.
Click to expand...
Click to collapse
I agree, I'm sometimes hard on my devices. This looked like possibly a replacement for the Otterbox Commuter I used on another phone - thin and durable. Still looking for something similar.
ebern220 said:
I agree, I'm sometimes hard on my devices. This looked like possibly a replacement for the Otterbox Commuter I used on another phone - thin and durable. Still looking for something similar.
Click to expand...
Click to collapse
I will give my thoughts on Monday when I get my hands on mine but I do have a feeling I will feel the same. I guess I will be atleast a little happy if its better then the Ringke Fusion I have right now (which isn't going to be hard to top) Then I can continue my search for an even better case.
Lets hope in the coming month we have some better options It's good that T Mobile is selling the phone as that might help get some people making some cases but it stinks there is no main stream companies other then case-mate making a case for the Z3.
dsf767 said:
I will give my thoughts on Monday when I get my hands on mine but I do have a feeling I will feel the same. I guess I will be atleast a little happy if its better then the Ringke Fusion I have right now (which isn't going to be hard to top) Then I can continue my search for an even better case.
Lets hope in the coming month we have some better options It's good that T Mobile is selling the phone as that might help get some people making some cases but it stinks there is no main stream companies other then case-mate making a case for the Z3.
Click to expand...
Click to collapse
Can you take some ringke fusion pics of the case on your xperia, if you can
Sent from my D6616 using Tapatalk
dsf767 said:
I will give my thoughts on Monday when I get my hands on mine but I do have a feeling I will feel the same. I guess I will be atleast a little happy if its better then the Ringke Fusion I have right now (which isn't going to be hard to top) Then I can continue my search for an even better case.
Lets hope in the coming month we have some better options It's good that T Mobile is selling the phone as that might help get some people making some cases but it stinks there is no main stream companies other then case-mate making a case for the Z3.
Click to expand...
Click to collapse
Remember to give us your thoughts on the case!
Look like is ok, any photo is install on your mobilr?
spacegreyphone said:
Look like is ok, any photo is install on your mobilr?
Click to expand...
Click to collapse
Right here: http://imgur.com/a/jYJuw#0
ChristianBale said:
Remember to give us your thoughts on the case!
Click to expand...
Click to collapse
I have to say I feel nearly the same as Christian, Looking at it it does look like a nice case but digging deeper you find some issues.
The buttons are extremely cheap and do rattle and have no clickyness to them what so ever. the plastic bumper does feel flimsy but I don't think it would crack if dropped because of the TPU behind it. However I think if you took the case off the wrong way and bent it it could easily crack. I also don't like the bulkyness it added to the width of the phone. Before I was using the case (and even with the Rinke Fusion the phone felt nice in the hand but now with the case it feels overly wide.
It does with with the Nilkin Tempered Glass Screen Protector (Barely) which is nice and I have a feeling will work with my magnetic connector (will test when I get home.
Overall I think I like it a little better then Christian and will use it over my Rinke Fusion (because I feel it has better protection) I will still be on the lookout for another case which after spending as much as I did on the case-mate is disappointing.
Overall I give it a 5/10
Well unfortunately this case is completely dead for me as it does not work with the magnetic charger port even with the cutout so back to the Rinke for me.
Where did you get the case from online? It's temporarily unavailable on Casemate's website and I can't find it anywhere else besides MobileFun (whose shipping is ridiculous)
Ebay matey.
But i'm form the UK, so it may well differ for you.
laujla said:
Where did you get the case from online? It's temporarily unavailable on Casemate's website and I can't find it anywhere else besides MobileFun (whose shipping is ridiculous)
Click to expand...
Click to collapse
I got mine from the US Caste Mate store.
I just bought mine today at one of the sony stores here in Malaysia. I have to agree with what Christian has pointed out. The buttons feel cheap and it has the loose sound which makes it feel cheap despite the price of it. I am a fan of Spigen casing because of the hybrid colors and full protection in all corners and this case mate slim tough is the closest fit I found to Spigen. But having it on can't fit into my magnetic charging dock without removing the cover which I think it will break some day.. Now I just remove the dock holder and did some DIY card board to charge it with the casing on
I guess I will switch to Ringke Fusion soon and let my 90 bucks burns.. Ouch..
---------- Post added at 05:29 PM ---------- Previous post was at 05:21 PM ----------
Btw, I decided to sell it out, who wants it can PM me. Thanks
The un symetrical looking back just bothers me. I am waiting for Spigen to give some Z3 love.
Hi all,
As most of you know, I've been testing out every case I can get my hands on. It's been more difficult this year, there doesn't seem to be as much choice and companies such as Spigen have really dragged their heels on getting cases out for this community. Here it is, my top 5 cases out at the moment which will do you proud.
1. Orzly Fusion Bumper
This case I've only had for a week or so and it's already risen to the top of my list. It's absolutely my favourite and I'll tell you why:
- Protects the case well.
- Adds extra grip to the phone.
- Combo's well with your favourite skin manufacturer (Xtreme, dBrand, Slick etc..)
Overall it's the best all round case, it's nowhere near as expensive as the official OnePlus stuff and it's my daily driver on the OnePlus 5.
2. Tudia OMNIX
Another latecomer to the party (in fact I've only just published the video on this one) but a fairly decent one. This case is my "if I'm going on a messy night out case."
What I mean by that, is that it provides excellent all round protection without completely compromising the use of the phone (like a flip case) It has a built in screen protector, which if used for longer stretches could get annoying and has port covers which makes the phone better protected against those accidental drops in beer.
3. Orzly Slim Stand Case
I'm rewarding Orzly here because of all the case manufacturers they seem to be the one taking risks on the OnePlus 5. Not only have they changed up their, FlexiCase, Wallet & Fusion designs they've produced an entirely new case for the OnePlus this year with the Slim Stand case.
The Slim Stand case make's it onto the list because it's not a case that I thought I'd like much when I saw it on Amazon. I ordered it, just so I could do a review and then probably stick it back in it's box. However to my surprise I've really enjoyed using this case. It's given me the functionality of a more traditional flip case, without the annoying "flip" element.
It feels really premium in the hand and uses the phones beauty and elegance to it's advantage. It's also a really handy case for those of you still playing Pokemon Go as you can use the stand to rest your finger through when you're out walking!
4. Spigen Rugged Armor
Spigen make it onto the list, even though they're main cases are still slated for release in September. Months after the phone was released! Imagine how much further they'd be up if they'd put some effort in!
Those of you which have had the Rugged Armor in the past know what to expect. It's premium at a reasonable price and it'll do what it says on the packaging, which is add extra grip and impact protection. It help's that it looks pretty nice also!
It can be said that you could probably get the Orzly FlexiCase for a little cheaper if you wanted to save some pennies.
5. OnePlus Silicone Red Case
I initially loved this case, but my love waned the longer I had it on the phone. This is very much a "showpiece" case with little utility, but if you've been racking up those referral points, already purchased the backpack then this would be my next choice. It feels super on the phone, adds some welcome colour- just don't leave it on for too long or it'll start to fade and feel tacky!
Thanks,
Let me know if you have any questions!
Jono
No mention of the Otterbox?
djsubterrain said:
No mention of the Otterbox?
Click to expand...
Click to collapse
I'm trying to take into consideration cost vs effectiveness. At least for me, the Otterbox is far too expensive to make it worth purchasing over any of these cases!
Do you feel the ring on the back of the Orzly Slim Stand Case, prevents you from laying the phone down screen side up because it would make the phone 'uneven'?
I really don't like laying my phone down facedown. Seems counterintuitive in my head if I'm trying to protect the screen from scratches.
Also, does the ring on the back keep the phone from sliding in and out of your pocket smoothly?
^That first point is what stopped me from continuing to use my Spigen Style ring.
Sent from my ONEPLUS A5000 using Tapatalk
Where is Ringke Fusion?
Sent from my Nexus 6P using XDA-Developers Legacy app
The rhino is definitely one to be on the list.
I have 4 no. ?
Where is the nillkin frosted shield?
Bought Orzly Fusion Bumper thanks to your thread and I love it.
Going to try this from supcase OnePlus 5 Unicorn Beetle Pro Full-Body Rugged Holster Case -Black
With a build in screen protector and hoping that this works for me.
Here is a YouTube review
Any thoughts on ringke fusion..? Looks vfm to me..itnseems very close to spigen hybrid..