Related
hello, my name is shahrukh and i need some help. i downloaded animmod (from 4shared) and then i donwloaded busybox. then i pressed blur and then it asked me if i want to reboot it. i pressed yes. this is when the problem starts. It turned off and then it turned on half way and then it turned off. it kept doing that and then i just left it for the night. in the morning it was not doing anything. when i held the power button it turned off and on for like two times and then turned off. i cant even start it up so i have no idea what to do.
i don"t know what to do
please help!!!!
Okay, we need details, describe exactly when "halfway on" is. We need your full model number and rom version (if you know it). Have you tried plugging it in to charge? Does it show anything now that you try to boot it? try holding volume up and powering on to enter recovery menu.
details
ok so when it turns on it says samsung. then after like 10 seconds it turns off. it does that for a few times and then it just goes in a black screen. the model number is YP-G7OC/NAW. when i plug it in to charge it goes on and off two times and then off. if it has low battery it just shows the sign. as for the rom i don't think i have any. i just rooted it using superoneclick. if it goes to recovery mode what do i do?
thanks!
(you got me really fired up when i saw the recovery menu!)
If you can get to recovery menu, try a factory reset, and clear cache. I am not sure if there is a recovery rom for your device, you should check samfirmware.com
tried both of them...no luck. and i couldn't find a recovery rom on samfrimware.com.
Your device has capacitive or mechanical home button?
it has a capacitive home button...the usa version
shahrukhraza said:
it has a capacitive home button...the usa version
Click to expand...
Click to collapse
The phone boots in recovery?
If so, I can investigate a little more what's happening.
I'll try to post a return-to-stock image soon... The problem is that mine is cluttered with crap that the zergRush exploit added (it insisted on installing busybox instead of just rooting...)
(I'm not sure, but I think someone else already posted a stock zImage and system image...)
Here is the post about fixing capacitive buttons. A quick search of forum should have found it.
http://forum.xda-developers.com/showthread.php?t=1421797
Sent from my YP-G70 using Tapatalk
nooooooo!!! you guys have all got it wrong. first of all it doesnt boot in recovery. the only way to get in recovery mode is when it shows the battery sign i hold "up volume"+ power button.and the capaciative button is completely fine. im just stuck in a bootloop (i think) and it has nothing to do with a broken capacitive button! i will try to post a video today to show you guys exactly whats happening.
i kind of had the same problem, one time i thought i had entropy's kernel on and i had CWM well i didn't but i still thought i had so i tried rebooting into recovery using the terminal:
su
reboot recovery
then i turned off and went to this weird recovery menu it had four options, reboot system, apply update from SD card, wipe data partition, and power off and it had a ton of red letters and words saying like, couldn't access data partition or cache partition and couldn't access /data/media, or system, and then i just turned it off because i wouldn't let me choose an option, and then i got stuck in a loop but not during when it says SAMSUNG mine happened during the animation music part that look like fireworks and then SAMSUNG would light up blue then go through it again and 2 more times then go black and i tried flashing the US stock ROM in download mode but still would go through the loop and it doesn't even charge so i got nothing
so did you somehow fix yours? and i never got a recovery menu that showed something about shut down.:confused
Before brick
xxxxxxxxxxxxxxxxx
wait....are you asking me those questions? just to tell you im no developer or something. im just a 12 year old who has his galaxy player stuck in a boot loop. you have to make another thread if you have a problem.
sorry!
Ok. : ) You got it wrong. No problem. His case is different from mine. Just wanted to use her Brick in case. Nothing more. good luck.
I resolve my doubts alone. Nothing that Google does not respond. haha
At least before brick.
ok. let me ask google too xD
anyways..anyone have any idea of how to fix this boot loop?
im trying to do the Linux thing by running the ressurector ans the VM windows the forum is posted under development called hard brick recovery for galaxy 5.0
ok.(i have no idea what you are saying...just saying!)
Okay, I'm not sure exactly what you'll need to know to help, so I'll just tell you what I think is important....
Current situation:
- If I boot the phone normally it freezes at the SONY screen and goes no further.
- If I attempt to boot into recovery mode, it loads the CWM screen (logo in the middle with instructions at bottom), but no actual menu or options. After about 5 seconds, this screen disappears, the phone reboots and then gets stuck on the SONY screen.
- If I connect the phone to the computer in Flashmode Flashtool recognizes it as being connected, but regardless of what I do, after about 2mins the phone reboots, loses connection with the computer, and freezes on the SONY screen as before mentioned.
- If I connect the phone to the computer normally while stuck on the SONY screen, the PC recognizes it though doesn't allow me to do anything to it, and Flashtool says I need to install drivers (I have installed every driver that comes with Flashtool).
How I got here:
- I've rooted the phone
- I've flashed Z2_DooMLoRD_AdvStkKernel_FW-438-v05
- I've unlocked the bootloader (via Flashtool)
- I've installed [Rom][Unofficial]Slim Rom 4.4.4 based on CM11.0, ROM for the Sony Xperia Z2
The phone was okay up until this point, however I wasn't happy with the ROM so I tried to reboot into recovery mode to wipe and install Carbon. This is when the trouble began.
Now it seems I can't do anything :/
Please help. This phone is literally 3 days and it looks like I've completely screwed it >.<
Thanks!
How to recover your device from almost any kind of brick
Requirements
Check the pinned sites
Flashtool
FTF of choice for your device
2 Rubber bands (I am serious but only if your device has no response)
Step1
unplug your device from anything
open flashtool on your pc
plug your cable into your PC
do not plug the cable into your device
Step2
Hold your power button and your volume up button at the same time
your device should buzz 3 times
(this should take a few secconds)
if it does not take a few seconds then you need to put a rubber band around your device holding your power button and your volume up button, DO NOT LEAVE MORE THAN IT NEEDS TO BE LEFT, wait patiently for your device to buzz 3 times
Step 3
once your device has buzzed 3 times you are free to flash a FTF as your device is powered off
step4
if you dont know how to flash a FTF but have gotten as far as installing flashtool,Z2 drivers and downloading a FTF FOR YOUR DEVICE... then folow this step
within your flashtool window click on the lightning icon at the top left
select flashmode
navigate to where you downloaded your FTF (OR put your FTF in your /flashtool/firmwares folder)
select your FTF
Flashtool should give you a prompt to plug in your device
hold volume down and plug in your device
step5
wait for it to finish flashing
step6
your device is now recovered, enjoy...
Sent from my D6503 using XDA Premium 4 mobile app
I bricked my phone doing this:
- root with eazyroot
- installed dual recovery
- full wipe
- install carbon + gapps
bum... bricked
i cant even see the Sony logo
Then i use the method mentioned by Envious_Data and my phone returned from hell
Good luck dude... hope u can fix that
carloscarvalho said:
I bricked my phone doing this:
- root with eazyroot
- installed dual recovery
- full wipe
- install carbon + gapps
bum... bricked
i cant even see the Sony logo
Then i use the method mentioned by Envious_Data and my phone returned from hell
Good luck dude... hope u can fix that
Click to expand...
Click to collapse
You didn't unlock your bootloader?
Isn't Carbon ROM AOSP?
If it is, it needs an unlocked bootloader or it will get bricked
Unbalanced said:
Okay, I'm not sure exactly what you'll need to know to help, so I'll just tell you what I think is important....
Current situation:
- If I boot the phone normally it freezes at the SONY screen and goes no further.
- If I attempt to boot into recovery mode, it loads the CWM screen (logo in the middle with instructions at bottom), but no actual menu or options. After about 5 seconds, this screen disappears, the phone reboots and then gets stuck on the SONY screen.
- If I connect the phone to the computer in Flashmode Flashtool recognizes it as being connected, but regardless of what I do, after about 2mins the phone reboots, loses connection with the computer, and freezes on the SONY screen as before mentioned.
- If I connect the phone to the computer normally while stuck on the SONY screen, the PC recognizes it though doesn't allow me to do anything to it, and Flashtool says I need to install drivers (I have installed every driver that comes with Flashtool).
How I got here:
- I've rooted the phone
- I've flashed Z2_DooMLoRD_AdvStkKernel_FW-438-v05
- I've unlocked the bootloader (via Flashtool)
- I've installed [Rom][Unofficial]Slim Rom 4.4.4 based on CM11.0, ROM for the Sony Xperia Z2
The phone was okay up until this point, however I wasn't happy with the ROM so I tried to reboot into recovery mode to wipe and install Carbon. This is when the trouble began.
Now it seems I can't do anything :/
Please help. This phone is literally 3 days and it looks like I've completely screwed it >.<
Thanks!
Click to expand...
Click to collapse
Okay I used to get into this kind of situation when I used HTC One, and what I did is try to flash recovery and unlocked bootloader again "using command".
And problem has solved. I think it is pretty much same for Xperia Z2, (ftf flashing method is not useful in this situation.)
I hope you know how to flash custom recovery using command. If not I think there is some thread that explains how to flash recovery and unlock the bootloader using command, if you can't find it plz let me know. Hope you have recovered phone next time I check this thread. Good luck mate :good:
HussainQ said:
You didn't unlock your bootloader?
Isn't Carbon ROM AOSP?
If it is, it needs an unlocked bootloader or it will get bricked
Click to expand...
Click to collapse
Yeah... I know... A newbie mistake...
I Just follow the instruction available in the site. And there is just "root and recovery"
No bootloader mentioned
But u r right... Thats the reason
Sent from my awesome Xperia Z2 using XDA Premium
@Envious_Data: Bro, thank you so much for that. I my z2 have only 1 day, and i god damn it bricket, that even screen wasn't working. So for other people who had bad luck: first I rooted using Community Rootkit, then unlocked bootloader, and at the end I flashed via fastboot boot.img which one i extracted from zip file from this thread - http://forum.xda-developers.com/showthread.php?t=2702001. Command prompt showed that it works. I rebooted phone sony logo showed up, but then disappeared, and then was crying and sorrow. Three years of rooting,flashing without any problem, and now that. Thank you one more time, that's a great lesson
I do have some advice for people
1. Try to find help threads for your device, i have one for Z2 that gives some useful info, ill be adding more soon
2. Once you have got the jist of flashing then try to expand on that, i do recomend roms first because its harder to brick from a rom than a kernel or a non stock based rom such as CM11 or AOSP
3. Always keep a stock flashable rom (kernel too if you have a unlocked bootloader) on your device
Sent from my D6503 using XDA Premium 4 mobile app
I too hard brick my Z2, only solution is the same as for Z1 http://forum.xda-developers.com/showthread.php?t=2646405
Sorry friend :`
discipuloosho said:
I too hard brick my Z2, only solution is the same as for Z1 http://forum.xda-developers.com/showthread.php?t=2646405
Sorry friend :`
Click to expand...
Click to collapse
A hard brick is by definition not recoverable by the user, requiring either special equipment ie jtag or RMA to fix.
I am quite surprised, and intrigued, at people flashing cm or AOSP on a two day old phone, was Sony experience that awful? You'd maybe be better served with a nexus device.
ghostofcain said:
A hard brick is by definition not recoverable by the user, requiring either special equipment ie jtag or RMA to fix.
I am quite surprised, and intrigued, at people flashing cm or AOSP on a two day old phone, was Sony experience that awful? You'd maybe be better served with a nexus device.
Click to expand...
Click to collapse
True friend, but I had an Xperia MT11i (Neo V) and all (fastboot, flashtool, CM, etc) was always no problem.
I've taken today for service (with CM11 (and cm kernel)) and see what happens ...
@Unbalanced I don't think your Z2 Hardbricked, if it were not ignite. Luck
Hi all, if it helps I did the same thing last night. Flashed CM11 without a recovery and wanted to revert back to my nandroid backup. I flashed doomloards kernal via fastboot. CWM started with no menu and just bootlooped. I then thought it may be a CWM issue, maybe no file structure or something. I flashed XZDuelKernal via fastboot and booted into CWM again and experienced the same issue. As this is a duel recovery, I then booted into TWRP. Recovery started and I was able to flash another zip then recover my nandroid backup. If you get this menu issue with CWM,try and flash a TWRP recovery and boot into that.
Also, as mentioned before, this is not a hard brick. It's just incompatible software and is easily fixed if you know what you are doing and prepared (nandroid backup, knowledge about fastboot and flashmode, ftf, recovery, unlocked bootloader).
Sent from my D6503 using Tapatalk
Stuck
Hi.
I believe (although I'm not sure) that I have bricked my Xperia Z2 in some way. When I press the 'power' button, the phone vibrates once and does nothing. I have tried to hold the 'power on' and 'volume up' buttons for a long time (half an hour with rubber bands), and nothing happens (as explained earlier in the thread).
I believe I am able to access the fastboot though, through 'Terminal' app on OSX. From there I can " ./fastboot devices " and get confirmation that they have loaded. I am also able to perform other tasks from here, such as flashing a recovery and " fastboot erase system -w " (which I believe may have got me to where I am now). I've been following things on this thread: http://forum.xda-developers.com/showthread.php?t=2277112
I have no experience in rooting or flashing, but attempted to flash a custom ROM because there were step by step instructions.
Anyway, I firstly used Sony's rooting procedure whereby an unlock code is generated etc. Eventually I gained access to the Recovery mode (via clockwork), and wiped the phone, installed the ROMAur zip and GApps zip. However, when I booted, it kept giving me warnings saying the apps were crashing. I've since gotten lost completely and need someone to help bail me out.
I'm hoping I can sort things out via the fastboot.
Thanks in advance for your help.
scoobard said:
Hi.
I believe (although I'm not sure) that I have bricked my Xperia Z2 in some way. When I press the 'power' button, the phone vibrates once and does nothing. I have tried to hold the 'power on' and 'volume up' buttons for a long time (half an hour with rubber bands), and nothing happens (as explained earlier in the thread).
I believe I am able to access the fastboot though, through 'Terminal' app on OSX. From there I can " ./fastboot devices " and get confirmation that they have loaded. I am also able to perform other tasks from here, such as flashing a recovery and " fastboot erase system -w " (which I believe may have got me to where I am now). I've been following things on this thread: http://forum.xda-developers.com/showthread.php?t=2277112
I have no experience in rooting or flashing, but attempted to flash a custom ROM because there were step by step instructions.
Anyway, I firstly used Sony's rooting procedure whereby an unlock code is generated etc. Eventually I gained access to the Recovery mode (via clockwork), and wiped the phone, installed the ROMAur zip and GApps zip. However, when I booted, it kept giving me warnings saying the apps were crashing. I've since gotten lost completely and need someone to help bail me out.
I'm hoping I can sort things out via the fastboot.
Thanks in advance for your help.
Click to expand...
Click to collapse
Download ftf file for your device and flash via flashtool.
mariosraptor said:
Download ftf file for your device and flash via flashtool.
Click to expand...
Click to collapse
Thanks for the quick reply Mario. I did just that (using Kuwait FFT for the D6503), and everything appears to be back to normal. Unfortunately I still have not got root access and can't remove the bloatware. As for the bricking issue however, it's solved. Thanks.
Hello all!
I am back to see if anyone has any more ideas with what I can do to resurrect my LG G3. To recap, I tried to flash android 5.0 and I had forgotten to re flash the stock recovery prior to doing so. Long story short I completely botched the process and I am left with a LG G3 that can only access system recovery selection menu. When ever i try to just boot the phone by holding the power button, it shows the G3 boot image and then an error in the top left reads: "Boot certification verify".
From there, the phones screen turns off and the led flashes amber and blue until I pull the battery.
If I remember right, I need to find a way to re flash download mode but it has been several months since I tried to repair it..
Hope you guys can provide me with some input!
I linked a video I made of what happens when i try booting the phone below:
https://www.youtube.com/watch?v=FmzHu3MRAxY
danetbra63 said:
Hello all!
I am back to see if anyone has any more ideas with what I can do to resurrect my LG G3. To recap, I tried to flash android 5.0 and I had forgotten to re flash the stock recovery prior to doing so. Long story short I completely botched the process and I am left with a LG G3 that can only access system recovery selection menu. When ever i try to just boot the phone by holding the power button, it shows the G3 boot image and then an error in the top left reads: "Boot certification verify".
From there, the phones screen turns off and the led flashes amber and blue until I pull the battery.
If I remember right, I need to find a way to re flash download mode but it has been several months since I tried to repair it..
Hope you guys can provide me with some input!
I linked a video I made of what happens when i try booting the phone below:
https://www.youtube.com/watch?v=FmzHu3MRAxY
Click to expand...
Click to collapse
I had to do a warranty exchange through the insurance. It is not worth
The effort since we don't have fastboot. Got a brand new replacement.
Hope you can do what I did. Told them the truth that the phone
Would not boot up. Nothing else.
cjchevez said:
I had to do a warranty exchange through the insurance. It is not worth
The effort since we don't have fastboot. Got a brand new replacement.
Hope you can do what I did. Told them the truth that the phone
Would not boot up. Nothing else.
Click to expand...
Click to collapse
Totally would have done that had I not dropped my phone in water:silly:
Just pay the hundred and use the insurance, you can report it lost.
This way you can have spare parts.
You can also replace the motherboard. Sometimes you can get them
For 100.00 but I'm only seeing them for 150.00 on eBay.
Id like to hear that you can unbrick this phone but I doubt it with
No fastboot. Good luck.
Since it will boot cant you just usecthe lg flash tool thingamajiger and flash a .kdz
danetbra63 said:
Hello all!
I am back to see if anyone has any more ideas with what I can do to resurrect my LG G3. To recap, I tried to flash android 5.0 and I had forgotten to re flash the stock recovery prior to doing so. Long story short I completely botched the process and I am left with a LG G3 that can only access system recovery selection menu. When ever i try to just boot the phone by holding the power button, it shows the G3 boot image and then an error in the top left reads: "Boot certification verify".
From there, the phones screen turns off and the led flashes amber and blue until I pull the battery.
If I remember right, I need to find a way to re flash download mode but it has been several months since I tried to repair it..
Hope you guys can provide me with some input!
I linked a video I made of what happens when i try booting the phone below:
https://www.youtube.com/watch?v=FmzHu3MRAxY
Click to expand...
Click to collapse
so, you can access recovery menu, does that mean you are in recovery?
if so, is it stock recovery or twrp?
deron37129 said:
Since it will boot cant you just usecthe lg flash tool thingamajiger and flash a .kdz
Click to expand...
Click to collapse
You need Download mode to restore to stock via KDZ or TOT. He's lost Download mode, apparently.
Sent from my VK810 4G
Welp woth out download mode unles there is a way to jtag ur only option is send it in or have you a lovely table ornamment
Can't he flash the download fix from within twrp, assuming that's the recovery he is talking about?
So I rooted my HTC ONE S (villec2) today, and I wanted to flash a custom rom on it. I got a recovery (turned out to be a bad one, but it worked either way.... I noticed way too late it was made for HTC One M8) I got TWRP 2.7.1.0 and I got it working on my phone. I then backed up the system, and realized I messed up the recovery. In the meantime I got a CM 12.1 img on it and wiped the thing. The wipe removed the old Android system and the CM I downloaded was a bad download. If I go to recovery in the bootloader, it will just do the HTC white screen with "Entering Recovery" and the red warning logo but it won't get anywhere. It's just stuck there. So now, I'm stuck with a device that won't boot normally - just stuck on the white HTC screen, will boot into bootloader, and I want to know if there's a way of accessing the internal storage without being in the operating system. The worst thing is, there's no external SD Card, all just internal... Please god help me. I'm really stressing out about this since it's the only phone I have and if I lose it.... well I'm practically f-ed.... :crying: I know that I messed a few things up really badly and I'm not sure what state the phone is in.
Also just to add, the phone is barely loading up right now. I'm really scared since it's my only phone and it won't even boot normally right now. It's really acting strange, it was on 90% battery but now it might just be dead... i don't know.... someone please help
I honestly think I screwed it up.... All it does now is just a white flash / flicker when I hold the power button (both only power button and vol down) and that's it. I'm really disappointed right now but oh well.... Maybe just because the battery is not charged.... Also been looking around the other threads and looks like a lot of people had the same issue but with 0 replies...
hi friend
i ve bricked a phone once and i recover it with flashing stock rom
did you try the stock rom ?
cazawiman said:
hi friend
i ve bricked a phone once and i recover it with flashing stock rom
did you try the stock rom ?
Click to expand...
Click to collapse
I have no way of trying the stock rom. I cannot access the phone itself because I deleted the OS. There's a weird thing, that if I plug the USB to the computer, it does the connect windows sound but the phone's internal storage is still not accessible.... So as it turns out I can get to the freaking bootloader but then it just turns off with a white flicker a second later.... I have no clue what to do :crying:
try to hook your device with windows and hold the Volume Down and Power
to see if it can detect it
cazawiman said:
try to hook your device with windows and hold the Volume Down and Power
to see if it can detect it
Click to expand...
Click to collapse
Alright. I slept through the night and now I'm here trying to resolve this again. Status now, is that when I try to boot it up, it just shows a white flicker and won't turn on. no matter if i try to boot in bootloader or normally. The device doesn't appear to be charging when I plug it in because it doesn't show the LED light for charging. I think it's hard bricked. I tried other threads, showing bright light to the proximity sensor, but nothing happened.
//edit// - My bootloader was unlocked, and I was on S-ON (HTC ONE S, S3 villec2) that might change on your phone and might make the process different
So I fixed it. I will leave the tutorial for anyone in the future that might be having the same issue. If you "locked yourself out" of your system, eg. no OS, and broken recovery just plug it into the computer, try somehow getting into bootloader, go into fastboot and plug the usb cable to your computer so you're in Fastboot USB. Then you can flash a recovery on the phone using a fastboot command. I believe it's fastboot flash recovery _filename_. Just google that, there'll be plenty. Then you have the recovery and you're back on track. After that you can get the rom you wanted. Just don't make my mistake, and check if your device is exactly the same as the files you're downloading for it. I messed up there . Anyway, good luck everyone!
t
yea
Happy to hear that u have fixed your phone add "solved " to the title and add a fast tutorial for help purpose
Sent from my thl T6 pro using XDA Free mobile app
Hi so I know people use the term brick wrong but I’m pretty sure I’m bricked and I want to know from you guys if there’s anything I can do. My phone shows the charging light and it turns on when I plug it in but it just says your device has been unlocked and can’t be trusted you will boot in 5 seconds then it says your device has been unlocked and the boot image is not working then it turns off. I can’t boot into recovery either it just does the same. I think it’s because I flashed a wrong boot.img to recovery and boot. Please tell me if I can do anything!
Have you tried the flashtool to flash stock rom? Same happened to me and flashtool worked for me.
try it because flashtool flashes stock rom via adb and it will replace the custom recovery and boot to in the process
Pvt_Phantom said:
Hi so I know people use the term brick wrong but I’m pretty sure I’m bricked and I want to know from you guys if there’s anything I can do. My phone shows the charging light and it turns on when I plug it in but it just says your device has been unlocked and can’t be trusted you will boot in 5 seconds then it says your device has been unlocked and the boot image is not working then it turns off. I can’t boot into recovery either it just does the same. I think it’s because I flashed a wrong boot.img to recovery and boot. Please tell me if I can do anything!
Click to expand...
Click to collapse
3 solution
1 use emma flashtool sony : https://developer.sony.com/develop/open-devices/get-started/flash-tool/ easy
2 use flashtool : www.flashtool.net meduim
3 use newflasher : https://forum.xda-developers.com/cr...gress-newflasher-xperia-command-line-t3619426 hard lol