[Q] I9100G didt know that he is an I9100G ! ! ! ROM FLASHING PROBLEMS - Galaxy S II Q&A, Help & Troubleshooting

I own an Samsung GT - I9100G but my Problem is that when i try flashing a ROM my Phone always say following:"This package is for "i9100g,GT-I9100G" devices; this is a " " ... "
THINGS I ALREADY TRIED :
I already tried to flash the OmniRom and CM11 I also toggled the signature varifacation on/off an in both cases i didnt worked.
I tried to flash both ROMS with CWM an TWRP but I got the same Result.
Flashing a Root Kernel and TWRP&CWM worked fine.
I think the point is that my Phone "forgot" what device number he had so he block all attempts to flash a new ROM to protect it. Normally it will fill the space after "this device is a ... " but it didnt.
Years ago I flashed CM 9 or 10 and this worked.
I hope someone could help me because I´m sick to see the TouchWiz UI.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
- To open the image just right click it and "open in a new Tab" --> you´ll be relinked to MEGA

Related

[Q] Help! I9100G Camera Failed error

Hello all guys!!!
I have a I9100G and every time I try to open the camera app after a few seconds shows the error camera failed.
I didn't install any rom or application, the device is like brand new with original software, firmware and kernel. I have already search a solution in the forum and follow these guide: [Guide]Solve your camera failure SGS 2 I9100G version and try to wipe all data from the recovery mode without any results.
But if I enter this code *#34971539# to enter in the camera flash menu and choose the first option I have this screen:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So probably it needs a camera firmware reflash but I can't find the download. It seems there is no firmware nor in the camera neither in the phone.
Thank you all for helping me and sorry for my terrible english.
Hi,
nobody can help me?
I'm looking where the camera firmware is stored in the phone but I can't find it. Is possible to extract the firmware from another working samsung s2?
Thanks.

[Q] Another Stupid Noob bricked his Z2 ... help!

Im a stupid noob.
With that out of the way i still want to ask for help.
I bought a Z2 two days ago and wanted to throw on the Cyanogen M9 Snapshot. It^s my first time with android and my first time
modding my phone. Maybe a little too much first times
I followed all the steps aka unlocking the phone ... recovery mode ... wipe previous data ... and loaded the Cyanogen M9 snapshot.
After Reboot i ended up in BootLoop and started checking for errors ... what i found was that my wipe didnt work. This is the message i get
all the time when i try to do the wipe/factory reset:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Any thoughts what i could do?
http://forum.xda-developers.com/showthread.php?t=2775411
recover your device through this for now, back to stock
im not sure what recovery you used but try using this one as there should be no problems with anything system related, you need to use flashtool from flashtool.net to flash this
http://forum.xda-developers.com/showthread.php?t=2702001

"Error: UEGetPhoneInfoFailure UE_2003" when trying to update to 6.0.1

Hi,
I just bought a sony xperia Z5compact from another guy that barely used it. He gave it to me with apparently, a stock ROM. But I dont know if the other guy did anything on the phone like rooting, unlocking, whatever.
But now I want to update from 6.0 to 6.0.1 and I cant do it. Neither in the phone, nor with the computer coz I get this error:
error: UEGetPhoneInfoFailure
UE_2003".
I checked more, and the phone has TWRP recovery and an Androdplus kernel. So it has been modified, but I dont know how to check the status of the bootloader or if it rooted.
I want to update the phone to 6.0.1. and I would like to have a stock rom and a locked bootloader. (because I read that custom rom and unlocking bootloader affect to the function of the camera).
How can I do it?
I am getting different information over the forum and the internet, and I am getting a bit lost...
the security thing from service info, stays like this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
Hi, i've got the same issue,
did you find any solution to update the phone ?
Thanks !

Error odin SM-G530H/DS (system.img.ext4 FAIL!(Erase))

My cell started with a loop to try to restore from the factory, so I tried using odin to put a new ROM, and I can not complete the procedure, it follows the image of the error
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
bution said:
My cell started with a loop to try to restore from the factory, so I tried using odin to put a new ROM, and I can not complete the procedure, it follows the image of the error
Click to expand...
Click to collapse
Greetings and welcome to assist. Have you tried kies/smart switch emergency firmware recovery to see if that works ?
Good luck
Sawdoctor
Yes, not support the model/Serial Number
SM-G530H/DS
I got same trouble, with my G530H XSE, just like you.
i dont know where i want to do. so many attempt i've been tryin.
any idea to help us? we need to help
emergency update from samsung kies, isn't working .
I was having a problem with 3 units.
G530h, 2 G530BT
by USB nda it worked .....
Pit error
without adding the pit error system
I solved all 3 of my clients by eMMC written using Medusa-pro
I did not find any other way

Question Failed to update firmware. UI 4.1

After downloading the new update the instalation stucks at 25 % and after 5 seconds the phone restarts and i got this message . Its T-Mobile unlocked phone with default settings . How to solve this?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
back up your data 'cause you'll likely need to flash the device.
reach out to your carrier first and see what they can do for you
Newbie question. What does "flash the device" mean ?
In short, flashing means installing a new custom rom or re-installing the stock rom due to some error or issues.
nsmallw71 said:
Newbie question. What does "flash the device" mean ?
Click to expand...
Click to collapse
Flashing is basically installing the update manually because, in this particular case, it is failing to do so automatically.
doughnut9 said:
In short, flashing means installing a new custom rom or re-installing the stock rom due to some error or issues.
Click to expand...
Click to collapse
And also this!
SOLVED with software update from PC using SmartSwitch !

Categories

Resources