Hello! I have problem with pairing my laptop running android 3.2(stock&rooted) and bluetooth OBD2 elm327. It seems like "paired, not connected". The diag software can not connect to OBD2 adapter.
In my phone with android 4.0.3(stock&rooted) it works good without asking a PIN.
What should I do to troubleshoot this problem?
Then, trying to search available services of OBD2 via sdptool
$ su
su
# sdptool search DID
sdptool search DID
Inquiring ...
Searching for DID on 00:0D:18:00:00:01 ...
Service RecHandle: 0x1000b
Service Class ID List:
"PnP Information" (0x1200)
Protocol Descriptor List:
"L2CAP" (0x0100)
PSM: 1
"SDP" (0x0001)
Language Base Attr List:
code_ISO639: 0x656e
encoding: 0x6a
base_offset: 0x100
Profile Descriptor List:
"PnP Information" (0x1200)
Version: 0x0100
# sdptool search SP
sdptool search SP
Inquiring ...
Searching for SP on 00:0D:18:00:00:01 ...
Service Name: RDA SPP
Service RecHandle: 0x10007
Service Class ID List:
"Serial Port" (0x1101)
Protocol Descriptor List:
"L2CAP" (0x0100)
"RFCOMM" (0x0003)
Channel: 16
Profile Descriptor List:
"Serial Port" (0x1101)
Version: 0x0100
And then browsing services in laptop:
$ su
su
# sdptool browse local
sdptool browse local
Browsing FF:FF:FF:00:00:00 ...
Service Name: Headset Audio Gateway
Service RecHandle: 0x10000
Service Class ID List:
"Headset Audio Gateway" (0x1112)
"Generic Audio" (0x1203)
Protocol Descriptor List:
"L2CAP" (0x0100)
"RFCOMM" (0x0003)
Channel: 12
Profile Descriptor List:
"Headset" (0x1108)
Version: 0x0102
Service Name: Hands-Free Audio Gateway
Service RecHandle: 0x10001
Service Class ID List:
"Handsfree Audio Gateway" (0x111f)
"Generic Audio" (0x1203)
Protocol Descriptor List:
"L2CAP" (0x0100)
"RFCOMM" (0x0003)
Channel: 13
Profile Descriptor List:
"Handsfree" (0x111e)
Version: 0x0105
Service Name: Audio Source
Service RecHandle: 0x10002
Service Class ID List:
"Audio Source" (0x110a)
Protocol Descriptor List:
"L2CAP" (0x0100)
PSM: 25
"AVDTP" (0x0019)
uint16: 0x102
Profile Descriptor List:
"Advanced Audio" (0x110d)
Version: 0x0102
Service Name: AVRCP TG
Service RecHandle: 0x10003
Service Class ID List:
"AV Remote Target" (0x110c)
Protocol Descriptor List:
"L2CAP" (0x0100)
PSM: 23
"AVCTP" (0x0017)
uint16: 0x103
Profile Descriptor List:
"AV Remote" (0x110e)
Version: 0x0100
Service Name: Voice Gateway
Service RecHandle: 0x10004
Service Class ID List:
"Headset Audio Gateway" (0x1112)
"Generic Audio" (0x1203)
Protocol Descriptor List:
"L2CAP" (0x0100)
"RFCOMM" (0x0003)
Channel: 11
Profile Descriptor List:
"Headset" (0x1108)
Version: 0x0100
Service Name: OBEX Object Push
Service RecHandle: 0x10005
Service Class ID List:
"OBEX Object Push" (0x1105)
Protocol Descriptor List:
"L2CAP" (0x0100)
"RFCOMM" (0x0003)
Channel: 12
"OBEX" (0x0008)
Profile Descriptor List:
"OBEX Object Push" (0x1105)
Version: 0x0100
Service Name: OBEX Phonebook Access Server
Service RecHandle: 0x10006
Service Class ID List:
"Phonebook Access - PSE" (0x112f)
Protocol Descriptor List:
"L2CAP" (0x0100)
"RFCOMM" (0x0003)
Channel: 19
"OBEX" (0x0008)
Profile Descriptor List:
"Phonebook Access" (0x1130)
Version: 0x0100
Service Name: Network service
Service Description: Network service
Service RecHandle: 0x10007
Service Class ID List:
"Network Access Point" (0x1116)
Protocol Descriptor List:
"L2CAP" (0x0100)
PSM: 15
"BNEP" (0x000f)
Version: 0x0100
SEQ16: 800 806
Language Base Attr List:
code_ISO639: 0x656e
encoding: 0x6a
base_offset: 0x100
Profile Descriptor List:
"Network Access Point" (0x1116)
Version: 0x0100
It is looking like laptop have not service "Serial port", how to add it?
And then:
$ su
su
# sdptool add --channel 16 SP
sdptool add --channel 16 SP
Serial Port service registered
# sdptool browse local
sdptool browse local
Browsing FF:FF:FF:00:00:00 ...
Service Name: Headset Audio Gateway
Service RecHandle: 0x10000
Service Class ID List:
"Headset Audio Gateway" (0x1112)
"Generic Audio" (0x1203)
Protocol Descriptor List:
"L2CAP" (0x0100)
"RFCOMM" (0x0003)
Channel: 12
Profile Descriptor List:
"Headset" (0x1108)
Version: 0x0102
Service Name: Hands-Free Audio Gateway
Service RecHandle: 0x10001
Service Class ID List:
"Handsfree Audio Gateway" (0x111f)
"Generic Audio" (0x1203)
Protocol Descriptor List:
"L2CAP" (0x0100)
"RFCOMM" (0x0003)
Channel: 13
Profile Descriptor List:
"Handsfree" (0x111e)
Version: 0x0105
Service Name: Audio Source
Service RecHandle: 0x10002
Service Class ID List:
"Audio Source" (0x110a)
Protocol Descriptor List:
"L2CAP" (0x0100)
PSM: 25
"AVDTP" (0x0019)
uint16: 0x102
Profile Descriptor List:
"Advanced Audio" (0x110d)
Version: 0x0102
Service Name: AVRCP TG
Service RecHandle: 0x10003
Service Class ID List:
"AV Remote Target" (0x110c)
Protocol Descriptor List:
"L2CAP" (0x0100)
PSM: 23
"AVCTP" (0x0017)
uint16: 0x103
Profile Descriptor List:
"AV Remote" (0x110e)
Version: 0x0100
Service Name: Voice Gateway
Service RecHandle: 0x10004
Service Class ID List:
"Headset Audio Gateway" (0x1112)
"Generic Audio" (0x1203)
Protocol Descriptor List:
"L2CAP" (0x0100)
"RFCOMM" (0x0003)
Channel: 11
Profile Descriptor List:
"Headset" (0x1108)
Version: 0x0100
Service Name: OBEX Object Push
Service RecHandle: 0x10005
Service Class ID List:
"OBEX Object Push" (0x1105)
Protocol Descriptor List:
"L2CAP" (0x0100)
"RFCOMM" (0x0003)
Channel: 12
"OBEX" (0x0008)
Profile Descriptor List:
"OBEX Object Push" (0x1105)
Version: 0x0100
Service Name: OBEX Phonebook Access Server
Service RecHandle: 0x10006
Service Class ID List:
"Phonebook Access - PSE" (0x112f)
Protocol Descriptor List:
"L2CAP" (0x0100)
"RFCOMM" (0x0003)
Channel: 19
"OBEX" (0x0008)
Profile Descriptor List:
"Phonebook Access" (0x1130)
Version: 0x0100
Service Name: Network service
Service Description: Network service
Service RecHandle: 0x10007
Service Class ID List:
"Network Access Point" (0x1116)
Protocol Descriptor List:
"L2CAP" (0x0100)
PSM: 15
"BNEP" (0x000f)
Version: 0x0100
SEQ16: 800 806
Language Base Attr List:
code_ISO639: 0x656e
encoding: 0x6a
base_offset: 0x100
Profile Descriptor List:
"Network Access Point" (0x1116)
Version: 0x0100
Service Name: Serial Port
Service Description: COM Port
Service Provider: BlueZ
Service RecHandle: 0x10008
Service Class ID List:
"Serial Port" (0x1101)
Protocol Descriptor List:
"L2CAP" (0x0100)
"RFCOMM" (0x0003)
Channel: 16
Language Base Attr List:
code_ISO639: 0x656e
encoding: 0x6a
base_offset: 0x100
Profile Descriptor List:
"Serial Port" (0x1101)
Version: 0x0100
We add SP profile.
We have UART at dev/ttyHS2
Then we can do this:
$ rfcomm connect 0 00:0D:18:00:00:01 16
rfcomm connect 0 00:0D:18:00:00:01 16
Can't connect RFCOMM socket: Invalid exchange
$ rfcomm connect 0 00:0D:18:00:00:01 16
rfcomm connect 0 00:0D:18:00:00:01 16
Can't open RFCOMM device: Permission denied
$ su
su
# rfcomm connect 0 00:0D:18:00:00:01 16
rfcomm connect 0 00:0D:18:00:00:01 16
Connected /dev/rfcomm0 to 00:0D:18:00:00:01 on channel 16
Press CTRL-C for hangup
Connection done!
By using microcom I can send AT commands to ELM327 adapter and can take answers. But diagnostic software can not connect to adapter.
Any help?
I know this is old, but what make/model is your Bluetooth device? And what diagnostic software?
Sometimes you have to watch out for copy-cat ELM327 devices. They are implemented slightly differently, so that the standard AT commands for ELM327 will not work. Test to make sure that a command of "03" returns "43..." and "07" returns "07...". If they do not, then it is not working with standard ELM327 AT commands.
Related
Hi!
Usb host on my A70 IT doesn't works(or works not properly?)
Result is the same with 4 different usb flash...
PHP:
<6>request_suspend_state: wakeup (3->0) at 34543067291305 (2011-03-20 08:55:26.774108889 UTC)
<7>omapdss omapdss: regulator_enable omapdss-vdds_dsi enabled 0
<4>omapdss DPI: Could not find exact pixel clock. Requested 41575 kHz, got 41574 kHz
<6>panel_enable [lcd]
<7>usb usb1: usb auto-resume
<7>ohci-omap ohci-omap.0: resume root hub
<7>hub 1-0:1.0: hub_resume
<7>hub 1-0:1.0: port 2: status 0107 change 0000
<7>hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
<7>usb 1-2: usb resume
<7>hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0004
<7>ohci-omap ohci-omap.0: GetStatus roothub.portstatus [1] = 0x00040103 PSSC PPS PES CCS
<7>usb 1-2: finish resume
<7>ohci-omap ohci-omap.0: urb c5bc9b40 path 2 ep0in 5ec20000 cc 5 --> status -62
<7>usb 1-2: retry with reset-resume
<7>hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0004
<7>ohci-omap ohci-omap.0: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS
<6>usb 1-2: reset full speed USB device using ohci-omap and address 2
<7>hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0004
<7>ohci-omap ohci-omap.0: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS
<7>usb 1-2: ep0 maxpacket = 16
<4>mma7660fc_ctrl_ioctl: Set polling delay 200
<4>usb_switch_print_state: 3 ATTACHED_HOST
<4>
<4>usb_switch_print_state: 3 ATTACHED_HOST
<4>
<7>twl4030_usb twl4030_usb: regulator_enable twl4030_usb-usb1v5 enabled 0
<7>twl4030_usb twl4030_usb: regulator_enable twl4030_usb-usb1v8 enabled 0
<7>twl4030_usb twl4030_usb: regulator_enable twl4030_usb-usb3v1 enabled 0
<6>musb_hdrc: version 6.0, musb-dma, peripheral, debug=0
<7>twl4030_usb twl4030_usb: regulator_enable twl4030_usb-usb3v1 enabled 1
<7>twl4030_usb twl4030_usb: regulator_enable twl4030_usb-usb1v8 enabled 1
<7>twl4030_usb twl4030_usb: regulator_enable twl4030_usb-usb1v5 enabled 1
<6>musb_hdrc: USB Host mode controller at fa0ab000 using DMA, IRQ 92
<6>musb_hdrc musb_hdrc: MUSB HDRC host driver
<7>/mnt/flash/releases/G8A/AX08_r2.1.2/arcbuild/linux/drivers/usb/core/inode.c: creating file '002'
<6>musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 2
<7>usb usb2: default language 0x0409
<6>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
<6>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb2: Product: MUSB HDRC host driver
<6>usb usb2: Manufacturer: Linux 2.6.29-omap1 musb-hcd
<6>usb usb2: SerialNumber: musb_hdrc
<7>usb usb2: uevent
<7>usb usb2: usb_probe_device
<6>usb usb2: configuration #1 chosen from 1 choice
<7>usb usb2: adding 2-0:1.0 (config #1, interface 0)
<7>usb 2-0:1.0: uevent
<7>hub 2-0:1.0: usb_probe_interface
<7>hub 2-0:1.0: usb_probe_interface - got id
<6>hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 1 port detected
<7>hub 2-0:1.0: standalone hub
<7>hub 2-0:1.0: individual port power switching
<7>hub 2-0:1.0: no over-current protection
<7>hub 2-0:1.0: power on to power good time: 10ms
<7>hub 2-0:1.0: 100mA bus power budget for each child
<7>hub 2-0:1.0: local power source is good
<7>hub 2-0:1.0: enabling power on all ports
<7>/mnt/flash/releases/G8A/AX08_r2.1.2/arcbuild/linux/drivers/usb/core/inode.c: creating file '001'
<7>hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000
<7>hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0002
<7>hub 2-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
<7>hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
<6>usb 2-1: new high speed USB device using musb_hdrc and address 2
<7>usb 2-1: khubd timed out on ep0in len=0/64
<7>usb 2-1: khubd timed out on ep0in len=0/64
<7>usb 2-1: khubd timed out on ep0in len=0/64
<3>usb 2-1: device descriptor read/64, error -110
<7>usb 2-1: khubd timed out on ep0in len=0/64
<7>usb 2-1: khubd timed out on ep0in len=0/64
<7>usb 2-1: khubd timed out on ep0in len=0/64
<3>usb 2-1: device descriptor read/64, error -110
<6>usb 2-1: new high speed USB device using musb_hdrc and address 3
<7>usb 2-1: khubd timed out on ep0in len=0/64
<7>usb 2-1: khubd timed out on ep0in len=0/64
<7>usb 2-1: khubd timed out on ep0in len=0/64
<3>usb 2-1: device descriptor read/64, error -110
<7>usb 2-1: khubd timed out on ep0in len=0/64
<7>usb 2-1: khubd timed out on ep0in len=0/64
<7>usb 2-1: khubd timed out on ep0in len=0/64
<3>usb 2-1: device descriptor read/64, error -110
<6>usb 2-1: new high speed USB device using musb_hdrc and address 4
...and no external drive presented
Help!!! What should I do?
Decided ...
There was no connection between contact 4 and signal ground on usb-microusb adapter.
P.S. But this adapter works properly with HP Voice Messenger ...
Hi
Anyone figured out the problem with these wifi test result?
Wifi State: Unknown
Network State:
Supplicant State: UNINITIALIZED
RSSI: -9999
BSSID:
SSID:
Hidden SSID: false
IP Address: 0.0.0.0
MAC Address:
Network ID: -1
Link Speed: -1Mbps
Scan Result:
Is it hardware or sotware problem?
Hi,everyone!
I have a i.mx535 freescale tablet running on linux 2.6.35.3-01 kernel with android 2.3.4 and I’ve been trying to connect a usb-gps to it, but I can't find its path in /dev.(I don't have a ttyUSB* in /dev) It is detected by the tablet because when I run the Usb Host Controller app it shows that on 1-1 there is a Prolific Technology Inc. USB-Serial Controller. How can I find the path of the gps?
dmesg shows this:
<6>Bluetooth: HCI socket layer initialized
<6>mc34708 Rev 2.4 FinVer 0 detected
<6>PMIC MC34708 ID:0x14
<6>regulator: SW1: 650 <--> 1437 mV at 1250 mV
<6>regulator: SW1B: 650 <--> 1437 mV at 1100 mV
<6>regulator: SW2: 650 <--> 1437 mV at 1300 mV
<6>regulator: SW3: 650 <--> 1425 mV at 1200 mV
<6>regulator: SW4A: 1200 <--> 3300 mV at 1500 mV
<6>regulator: SW4B: 1200 <--> 3300 mV at 1500 mV
<6>regulator: SW5: 1200 <--> 1975 mV at 1800 mV
<6>regulator: SWBST:
<6>regulator: VPLL: 1200 <--> 1800 mV at 1800 mV
<6>regulator: VREFDDR:
<6>regulator: VDAC: 2500 <--> 2775 mV at 2775 mV
<6>regulator: VUSB:
<6>regulator: VUSB2: 2500 <--> 3000 mV at 2500 mV
<6>regulator: VGEN1: 1200 <--> 1550 mV at 1300 mV
<6>regulator: VGEN2: 2500 <--> 3300 mV at 2500 mV
<6>pmic 0-0008: Loaded
<6>Switching to clocksource mxc_timer1
<6>NET: Registered protocol family 2
<6>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
<6>TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
<6>TCP: Hash tables configured (established 131072 bind 65536)
<6>TCP reno registered
<6>UDP hash table entries: 512 (order: 1, 8192 bytes)
<6>UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
<6>NET: Registered protocol family 1
<6>RPC: Registered udp transport module.
<6>RPC: Registered tcp transport module.
<6>RPC: Registered tcp NFSv4.1 backchannel transport module.
<6>Unpacking initramfs...
<6>Freeing initrd memory: 176K
<6>LPMode driver module loaded
<6>Static Power Management for Freescale i.MX5
<6>PM driver module loaded
<6>sdram autogating driver module loaded
<6>Bus freq driver module loaded
<6>DI0 is primary
<6>Hallo Mutti
<6>mxc_dvfs_core_probe
<6>DVFS driver module loaded
<6>i.MXC CPU frequency driver
<6>DVFS PER driver module loaded
<6>ashmem: initialized
<6>msgmni has been set to 1805
<6>alg: No test for stdrng (krng)
<6>cryptodev: driver loaded.
<6>io scheduler noop registered
<6>io scheduler deadline registered
<6>io scheduler cfq registered (default)
<3>regulator: get() with no identifier
<4>By setting, SII driver will not be enabled
<4>By setting, LDB driver will not be enabled
<3>mxc_ipu mxc_ipu: Channel already disabled 9
<3>mxc_ipu mxc_ipu: Channel already uninitialized 9
<3>mxc_ipu mxc_ipu: Channel already disabled 7
<3>mxc_ipu mxc_ipu: Channel already uninitialized 7
<3>mxc_ipu mxc_ipu: Channel already disabled 10
<3>mxc_ipu mxc_ipu: Channel already uninitialized 10
<6>Serial: MXC Internal UART driver
<6>mxcintuart.0: ttymxc0 at MMIO 0x53fbc000 (irq = 31) is a Freescale i.MX
<6>console [ttymxc0] enabled, bootconsole disabled
<6>mxcintuart.1: ttymxc1 at MMIO 0x53fc0000 (irq = 32) is a Freescale i.MX
<6>mxcintuart.2: ttymxc2 at MMIO 0x5000c000 (irq = 33) is a Freescale i.MX
<6>mxcintuart.3: ttymxc3 at MMIO 0x53ff0000 (irq = 13) is a Freescale i.MX
<6>mxcintuart.4: ttymxc4 at MMIO 0x63f90000 (irq = 86) is a Freescale i.MX
<6>loop: module loaded
<6>pmem_adsp: 0 init
<6>pmem_gpu: 1 init
<6>MXC MTD nand Driver 3.0
<6>i.MX GPMI NFC
<6>vcan: Virtual CAN interface driver
<6>Freescale FlexCAN Driver
<6>FEC Ethernet Driver
<6>fec_enet_mii_bus: probed
<6>PPP generic driver version 2.4.2
<6>PPP Deflate Compression module registered
<6>PPP BSD Compression module registered
<6>PPP MPPE Compression module registered
<6>NET: Registered protocol family 24
<6>tun: Universal TUN/TAP device driver, 1.6
<6>tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
<6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>fsl-ehci fsl-ehci.1: Freescale On-Chip EHCI Host Controller
<6>fsl-ehci fsl-ehci.1: new USB bus registered, assigned bus number 1
<6>fsl-ehci fsl-ehci.1: irq 14, io base 0x53f80200
<6>fsl-ehci fsl-ehci.1: USB 2.0 started, EHCI 1.00
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 1 port detected
<6>usbcore: registered new interface driver cdc_acm
<6>cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adap
ters
<6>Initializing USB Mass Storage driver...
<6>usbcore: registered new interface driver usb-storage
<6>USB Mass Storage support registered.
<6>usbcore: registered new interface driver usbserial
<6>usbserial: USB Serial Driver core
<6>USB Serial support registered for GSM modem (1-port)
<6>usbcore: registered new interface driver option
<6>option: v0.7.2:USB Driver for GSM modems
<6>ARC USBOTG Device Controller driver (1 August 2005)
<6>Android usb driver initialize
<6>android_usb gadget: android_usb ready
<7>dr_controller_run: udc enter low power mode
<6>fsl-usb2-udc: bind to driver android_usb
<6>android gadget: register function adb
<6>android gadget: register function usb_mass_storage
<6>android gadget: register function rndis
<6>rndis_function_bind_config MAC: 00:00:00:00:00:00
<4>android_usb gadget: using random self ethernet address
<4>android_usb gadget: using random host ethernet address
<6>usb0: MAC 4e:e3:dd:38:b3:09
<6>usb0: HOST MAC 36:1c:1a:c6:25:10
<6>android_usb gadget: usb_mass_storage, version: 2009/09/11
<6>android_usb gadget: Number of LUNs=3
<6> lun0: LUN: removable file: (no medium)
<6> lun1: LUN: removable file: (no medium)
<6> lun2: LUN: removable file: (no medium)
<4>mice: could not register psaux device, error: -16
<6>mice: PS/2 mouse device common for all mice
<6>input: gpio-keys as /devices/platform/gpio-keys/input/input0
<6>MXC keypad loaded
<6>input: mxc_power_key as /devices/virtual/input/input1
<6>PMIC powerkey probe
<3>egalax_ts 2-0004: egalax_ts: failed to read firmware version
<4>egalax_ts: probe of 2-0004 failed with error -5
<3>p1003_fwv33 2-0041: couldn't read panel infomation.
<4>p1003_fwv33: probe of 2-0041 failed with error -5
<4>DA9052 TSI Device Driver, v1.0
<6>using rtc device, mxc_rtc, for alarms
<6>mxc_rtc mxc_rtc.0: rtc core: registered mxc_rtc as rtc0
<6>pmic rtc probe start
<6>pmic_rtc mc34708_rtc.1: rtc core: registered mc34708_rtc as rtc1
<6>pmic rtc probe succeed
<6>i2c /dev entries driver
<6>IR NEC protocol handler initialized
<6>IR RC5(x) protocol handler initialized
<6>IR RC6 protocol handler initialized
<6>IR JVC protocol handler initialized
<6>IR Sony protocol handler initialized
<6>Linux video capture interface: v2.00
<6>usb 1-1: new full speed USB device using fsl-ehci and address 2
<6>mxc_v4l2_output mxc_v4l2_output.0: Registered device video1
<6>usbcore: registered new interface driver uvcvideo
<6>USB Video Class driver (v0.1.0)
<6>APM Battery Driver
<6>check mma8450 chip ID
<6>mma8450 0-001c: build time Feb 15 2013 16:59:28
<6>input: mma8450 as /devices/virtual/input/input2
<6>add mma8450 i2c driver
<6>MXC WatchDog Driver 2.0
<6>MXC Watchdog # 0 Timer: initial timeout 60 sec
<6>device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: [email protected]
com
<6>Bluetooth: Virtual HCI driver ver 1.3
<6>Bluetooth: HCI UART driver ver 2.2
<6>Bluetooth: HCIATH3K protocol initialized
<6>Bluetooth: Generic Bluetooth USB driver ver 0.6
<6>usbcore: registered new interface driver btusb
<6>PMIC ADC start probe
<6>VPU initialized
<6>mxc_asrc registered
<6>gpu mmu enabled
<6>mxsdhci: MXC Secure Digital Host Controller Interface driver
<6>mxsdhci: MXC SDHCI Controller Driver.
<6>mmc0: SDHCI detect irq 0 irq 1 INTERNAL DMA
<6>mxsdhci: MXC SDHCI Controller Driver.
<6>mmc1: SDHCI detect irq 203 irq 3 INTERNAL DMA
<7>Registered led device: pmic_ledsr
<7>Registered led device: pmic_ledsg
<7>Registered led device: pmic_ledsb
<6>usbcore: registered new interface driver usbhid
<6>usbhid: USB HID core driver
<6>logger: created 64K log 'log_main'
<6>logger: created 256K log 'log_events'
<6>logger: created 64K log 'log_radio'
<6>logger: created 64K log 'log_system'
<6>Cirrus Logic CS42888 ALSA SoC Codec Driver
<6>sgtl5000-i2c 1-000a: SGTL5000 revision 17
<6>mxc_spdif mxc_spdif.0: MXC SPDIF Audio Transmitter
<4>No device for codec mxc spdif
<4>No device for DAI mxc spdif
<4>No device for DAI imx-ssi-1-0
<4>No device for DAI imx-ssi-1-1
<4>No device for DAI imx-ssi-2-0
<4>No device for DAI imx-ssi-2-1
<4>No device for DAI imx-spdif-dai
<6>DMA Sound Buffer Allocated: Playback UseIram=1 ext_ram=0 buf->addr=f8016000 b
uf->area=e0856000 size=24576
<6>DMA Sound Buffer Allocated: Capture UseIram=1 ext_ram=1 buf->addr=cf3a0000 b
uf->area=fb02a000 size=24576
<6>asoc: SGTL5000 <-> imx-ssi-2-0 mapping ok
<6>mmc0: new high speed SDHC card at address e624
<6>mmcblk0: mmc0:e624 SU04G 3.69 GiB
<6> mmcblk0: p1 p2 p3 < p5 p6 > p4
<6>DMA Sound Buffer Allocated: Playback UseIram=1 ext_ram=1 buf->addr=cf3d8000 b
uf->area=fb030000 size=24576
<6>asoc: mxc spdif <-> imx-spdif-dai mapping ok
<6>ALSA device list:
<6> #0: imx-3stack (SGTL5000)
<6> #1: imx-3stack-spdif (mxc spdif)
<6>nf_conntrack version 0.5.0 (14443 buckets, 57772 max)
<6>IPv4 over IPv4 tunneling driver
<6>GRE over IPv4 tunneling driver
<6>ip_tables: (C) 2000-2006 Netfilter Core Team
<6>TCP cubic registered
<6>NET: Registered protocol family 10
<6>IPv6 over IPv4 tunneling driver
<6>NET: Registered protocol family 17
<6>NET: Registered protocol family 15
<6>can: controller area network core (rev 20090105 abi 8)
<6>NET: Registered protocol family 29
<6>can: raw protocol (rev 20090105)
<6>can: broadcast manager protocol (rev 20090105 t)
<6>Bluetooth: L2CAP ver 2.14
<6>Bluetooth: L2CAP socket layer initialized
<6>Bluetooth: SCO (Voice Link) ver 0.6
<6>Bluetooth: SCO socket layer initialized
<6>Bluetooth: RFCOMM TTY layer initialized
<6>Bluetooth: RFCOMM socket layer initialized
<6>Bluetooth: RFCOMM ver 1.11
<6>Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>Bluetooth: BNEP filters: protocol multicast
<6>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>L2TP core driver, V2.0
<6>PPPoL2TP kernel driver, V2.0
<6>VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2
<6>input: mxc_ts as /devices/virtual/input/input3
<4>mxc input touchscreen loaded
<6>mxc_rtc mxc_rtc.0: setting system clock to 1970-01-01 00:00:00 UTC (0)
<6>Freeing init memory: 196K
<3>init: cannot open '/initlogo.rle'
<6>EXT4-fs (mmcblk0p2): recovery complete
<6>EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
<6>EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
<6>EXT4-fs (mmcblk0p5): recovery complete
<6>EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Opts: nodelal
loc
<6>EXT4-fs (mmcblk0p6): recovery complete
<6>EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null)
<3>init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recover
y'
<3>init: cannot execve('/data/init.ecarus.sh'): Text file busy
<6>warning: `rild' uses 32-bit capabilities (legacy support in use)
<6>pmem: request for physical address of pmem region from process 2195.
<6>eth0: Freescale FEC PHY driver [Generic PHY] (mii_bushy_addr=0:00, irq=-1)
<1>Unhandled fault: external abort on non-linefetch (0x1018) at 0x2b530054
<6>request_suspend_state: on (3->0) at 12219554377 (1970-01-02 00:00:03.72136662
4 UTC)
<1>Unhandled fault: external abort on non-linefetch (0x1018) at 0x2b530054
<6>request_suspend_state: on (0->0) at 12432150502 (1970-01-02 00:00:03.93396249
9 UTC)
<1>Unhandled fault: external abort on non-linefetch (0x1018) at 0x2ba3e054
<1>Unhandled fault: external abort on non-linefetch (0x1018) at 0x2badb054
<1>Unhandled fault: external abort on non-linefetch (0x1018) at 0x2bc3e054
<1>Unhandled fault: external abort on non-linefetch (0x1018) at 0x2bcdb054
<6>PHY: 0:00 - Link is Up - 100/Full
<1>Unhandled fault: external abort on non-linefetch (0x1018) at 0x2bd3e054
<1>Unhandled fault: external abort on non-linefetch (0x1018) at 0x2bddb054
<1>Unhandled fault: external abort on non-linefetch (0x1018) at 0x2be3e054
<1>Unhandled fault: external abort on non-linefetch (0x1018) at 0x2bedb054
<7>DVFS is started
<7>del_all_devices_contexts: Destroyed context 1 on device id = 1
<6>Not all allocated memory blocks were freed. Doing it now.
<6>Freeing list entry #0, gpuaddr=166000
<6>Freeing list entry #1, gpuaddr=167000
<6>Freeing list entry #2, gpuaddr=177000
<6>Freeing list entry #3, gpuaddr=1a9000
<6>Freeing list entry #6, gpuaddr=1fa000
<6>Freeing list entry #7, gpuaddr=1fc000
<6>Freeing list entry #8, gpuaddr=21c000
<6>Freeing list entry #88, gpuaddr=bbc000
<7>eth0: no IPv6 routers present
<6>usb 1-1: USB disconnect, address 2
<7>ehci_fsl_bus_suspend, Host 1
<6>usb wakeup is here
<7>ehci_fsl_bus_resume, Host 1
<6>usb 1-1: new high speed USB device using fsl-ehci and address 3
<6>hub 1-1:1.0: USB hub found
<6>hub 1-1:1.0: 4 ports detected
<6>usb 1-1.1: new low speed USB device using fsl-ehci and address 4
<6>input: Microsoft Microsoft Basic Optical Mouse as /devices/platform/fsl-ehc
i.1/usb1/1-1/1-1.1/1-1.1:1.0/input/input4
<6>generic-usb 0003:045E:0084.0001: input: USB HID v1.11 Mouse [Microsoft Micro
soft Basic Optical Mouse ] on usb-fsl-ehci.1-1.1/input0
<7>Waiting arm_podf enabled!
<6>usb 1-1.3: new full speed USB device using fsl-ehci and address 5
<3>init: untracked pid 2922 exited
<6>EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
<6>usb 1-1: USB disconnect, address 3
<6>usb 1-1.1: USB disconnect, address 4
<6>usb 1-1.3: USB disconnect, address 5
<7>ehci_fsl_bus_suspend, Host 1
<6>usb wakeup is here
<7>ehci_fsl_bus_resume, Host 1
<6>usb 1-1: new full speed USB device using fsl-ehci and address 6
I ran into some issues with OTG with a certain device.
When I try to use my HackRF (Software defined radio peripheral) with the RF Analyzer app the device is reset immediately when the app tries to open the USB connection.
To me it seems that the Tegra USB driver does not like this device. (The app itself uses only the official Android USB API and no native code and does not require root)
I made some tests to ensure that this issue is not the app and not my OTG setup:
- Tested everything with & without a powered USB hub to make sure it is not a power issue
- USB mouse & USB flash drive are working fine on my N9
- I tested the HackRF on my Nexus 5, LG G Pad 7.0 and on the Archos 97b Titanium - it works fine there.
- My N9 is running the latest firmware (R)
I'm posting here about it because maybe one of you has an idea how this could be fixed.
References:
GitHub discussion about this issue:
https://github.com/demantz/hackrf_android/issues/2
(comments 8-11)
RF Analyzer app:
https://github.com/demantz/RFAnalyzer
https://play.google.com/store/apps/details?id=com.mantz_it.rfanalyzer
HackRF:
https://greatscottgadgets.com/hackrf/
https://github.com/mossmann/hackrf/wiki
Logcat:
Code:
I/ActivityManager( 1378): START u0 {act=android.intent.action.MAIN cat=[android.intent.category.LAUNCHER] flg=0x10200000 cmp=com.mantz_it.rfanalyzer/.MainActivity (has extras)} from uid 10022 on display 0
I/ActivityManager( 1378): Start proc com.mantz_it.rfanalyzer for activity com.mantz_it.rfanalyzer/.MainActivity: pid=14943 uid=10096 gids={50096, 9997, 1028, 1015, 3003} abi=arm64-v8a
I/MainActivity(14943): onCreate: started logcat (Process[pid=14962]) to /storage/emulated/0/RFAnalyzer/log.txt
D/OpenGLRenderer(14943): Render dirty regions requested: true
D/Atlas (14943): Validating map...
I/OpenGLRenderer(14943): Initialized EGL, version 1.4
D/OpenGLRenderer(14943): Enabling debug mode 0
I/ActivityManager( 1378): Displayed com.mantz_it.rfanalyzer/.MainActivity: +531ms
D/HackRFSource(14943): setBasebandFilterWidth: Setting BB filter width to 15000000
D/HackRFSource(14943): setSampleRate: setting sample rate to 20000000
D/TaskPersister( 1378): removeObsoleteFile: deleting file=349_task.xml
I/hackrf_android(14943): initHackrf: Found 1 USB devices.
D/hackrf_android(14943): initHackrf: deviceList: vendor=7504 product=24713
I/hackrf_android(14943): initHackrf: Found HackRF One at /dev/bus/usb/003/003
D/TaskPersister( 1378): removeObsoleteFile: deleting file=349_task_thumbnail.png
I/ActivityManager( 1378): START u0 {flg=0x10000000 cmp=com.android.systemui/.usb.UsbPermissionActivity (has extras)} from uid 1000 on display 0
D/hackrf_android(14943): Permission request for device /dev/bus/usb/003/003 was send. waiting...
I/art ( 1378): Background sticky concurrent mark sweep GC freed 15638(826KB) AllocSpace objects, 5(7MB) LOS objects, 14% free, 48MB/55MB, paused 14.834ms total 55.769ms
I/ActivityManager( 1378): Displayed com.android.systemui/.usb.UsbPermissionActivity: +54ms
W/InputMethodManagerService( 1378): Window already focused, ignoring focus gain of: com.android.internal.view.IInputMeth
[email protected] attribute=null, token = [email protected]
D/OpenGLRenderer( 1553): endAllStagingAnimators on 0x558e65fbf0 (RippleDrawable) with handle 0x558de22900
D/hackrf_android(14943): initHackrf: Permission granted for device /dev/bus/usb/003/003
I/hackrf_android(14943): constructor: create Hackrf instance from /dev/bus/usb/003/003. Vendor ID: 7504 Product ID: 24713
I/hackrf_android(14943): constructor: device protocol: 0
I/hackrf_android(14943): constructor: device class: 0 subclass: 0
I/hackrf_android(14943): constructor: interface count: 2
I/hackrf_android(14943): constructor: [interface 0] interface protocol: 255 subclass: 255
I/hackrf_android(14943): constructor: [interface 0] interface class: 255
I/hackrf_android(14943): constructor: [interface 0] endpoint count: 2
I/hackrf_android(14943): constructor: [endpoint 0 (IN)] address: 129 attributes: 2 direction: 128 max_packet_size: 512
I/hackrf_android(14943): constructor: [endpoint 1 (OUT)] address: 2 attributes: 2 direction: 0 max_packet_size: 512
D/UsbHostManager( 1378): Added device UsbDevice[mName=/dev/bus/usb/003/004,mVendorId=7504,mProductId=24713,mClass=0,mSubclass=0,mProtocol=0,mManufacturerName=Great Scott Gadgets,mProductName=HackRF One,mSerialNumber=null,mConfigurations=[
D/UsbHostManager( 1378): UsbConfiguration[mId=1,mName=Transceiver,mAttributes=128,mMaxPower=250,mInterfaces=[
D/UsbHostManager( 1378): UsbInterface[mId=0,mAlternateSetting=0,mName=null,mClass=255,mSubclass=255,mProtocol=255,mEndpoints=[
D/UsbHostManager( 1378): UsbEndpoint[mAddress=129,mAttributes=2,mMaxPacketSize=512,mInterval=0]
D/UsbHostManager( 1378): UsbEndpoint[mAddress=2,mAttributes=2,mMaxPacketSize=512,mInterval=0]]]
D/UsbHostManager( 1378): UsbConfiguration[mId=2,mName=CPLD update,mAttributes=128,mMaxPower=250,mInterfaces=[
D/UsbHostManager( 1378): UsbInterface[mId=0,mAlternateSetting=0,mName=null,mClass=255,mSubclass=255,mProtocol=255,mEndpoints=[
D/UsbHostManager( 1378): UsbEndpoint[mAddress=129,mAttributes=2,mMaxPacketSize=512,mInterval=0]
D/UsbHostManager( 1378): UsbEndpoint[mAddress=2,mAttributes=2,mMaxPacketSize=512,mInterval=0]]]]
D/AndroidRuntime(14943): Shutting down VM
E/AndroidRuntime(14943): FATAL EXCEPTION: main
E/AndroidRuntime(14943): Process: com.mantz_it.rfanalyzer, PID: 14943
E/AndroidRuntime(14943): java.lang.RuntimeException: Error receiving broadcast Intent { act=com.mantz_it.hackrf_android.USB_PERMISSION flg=0x10 (has extras) } in [email protected]
E/AndroidRuntime(14943): at android.app.LoadedApk$ReceiverDispatcher$Args.run(LoadedApk.java:871)
E/AndroidRuntime(14943): at android.os.Handler.handleCallback(Handler.java:739)
E/AndroidRuntime(14943): at android.os.Handler.dispatchMessage(Handler.java:95)
E/AndroidRuntime(14943): at android.os.Looper.loop(Looper.java:135)
E/AndroidRuntime(14943): at android.app.ActivityThread.main(ActivityThread.java:5221)
E/AndroidRuntime(14943): at java.lang.reflect.Method.invoke(Native Method)
E/AndroidRuntime(14943): at java.lang.reflect.Method.invoke(Method.java:372)
E/AndroidRuntime(14943): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:899)
E/AndroidRuntime(14943): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:694)
E/AndroidRuntime(14943): Caused by: java.lang.NullPointerException: Attempt to invoke virtual method 'boolean android.hardware.usb.UsbDeviceConnection.claimInterface(android.hardware.usb.UsbInterface, boolean)' on a null object reference
E/AndroidRuntime(14943): at com.mantz_it.hackrf_android.Hackrf.sendUsbRequest(Hackrf.java:469)
E/AndroidRuntime(14943): at com.mantz_it.hackrf_android.Hackrf.getBoardID(Hackrf.java:505)
E/AndroidRuntime(14943): at com.mantz_it.rfanalyzer.HackrfSource.isOpen(HackrfSource.java:113)
E/AndroidRuntime(14943): at com.mantz_it.rfanalyzer.MainActivity.startAnalyzer(MainActivity.java:724)
E/AndroidRuntime(14943): at com.mantz_it.rfanalyzer.MainActivity.onIQSourceReady(MainActivity.java:421)
E/AndroidRuntime(14943): at com.mantz_it.rfanalyzer.HackrfSource.onHackrfReady(HackrfSource.java:99)
E/AndroidRuntime(14943): at com.mantz_it.hackrf_android.Hackrf$1.onReceive(Hackrf.java:202)
E/AndroidRuntime(14943): at android.app.LoadedApk$ReceiverDispatcher$Args.run(LoadedApk.java:861)
E/AndroidRuntime(14943): ... 8 more
W/ActivityManager( 1378): Force finishing activity com.mantz_it.rfanalyzer/.MainActivity
W/ContextImpl( 1378): Calling a method in the system process without a qualified user: android.app.ContextImpl.sendBroadcast:1321 com.android.server.usb.UsbSettingsManager.deviceAttached:741 com.android.server.usb.UsbHostManager.endUsbDeviceAdded:286 com.android.server.usb.UsbHostManager.monitorUsbHostBus:-2 com.android.server.usb.UsbHostManager.access$000:47
I/OpenGLRenderer( 1378): Initialized EGL, version 1.4
I/art ( 1378): Background partial concurrent mark sweep GC freed 10113(655KB) AllocSpace objects, 11(12MB) LOS objects, 26% free, 44MB/60MB, paused 1.052ms total 111.381ms
W/ActivityManager( 1378): Activity pause timeout for ActivityRecord{1afa49bd u0 com.mantz_it.rfanalyzer/.MainActivity t351 f}
D/WifiService( 1378): acquireWifiLockLocked: WifiLock{Firepaper type=1 [email protected]}
D/WifiService( 1378): releaseWifiLockLocked: WifiLock{Firepaper type=1 [email protected]}
D/TaskPersister( 1378): removeObsoleteFile: deleting file=352_task_thumbnail.png
Kernel Log:
Code:
<6>[ 103.778733] usb 3-1.4: reset high-speed USB device number 6 using tegra-ehci
<6>[ 103.901440] usb 3-1.4: USB disconnect, device number 6
<6>[ 103.998737] usb 3-1.4: new high-speed USB device number 7 using tegra-ehci
<6>[ 104.109981] usb 3-1.4: New USB device found, idVendor=1d50, idProduct=6089
<6>[ 104.110017] usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
<6>[ 104.110029] usb 3-1.4: Product: HackRF One
<6>[ 104.110038] usb 3-1.4: Manufacturer: Great Scott Gadgets
<6>[ 144.698651] usb 3-1.4: reset high-speed USB device number 7 using tegra-ehci
<6>[ 144.810814] usb 3-1.4: USB disconnect, device number 7
<6>[ 144.908648] usb 3-1.4: new high-speed USB device number 8 using tegra-ehci
<6>[ 145.019949] usb 3-1.4: New USB device found, idVendor=1d50, idProduct=6089
<6>[ 145.019973] usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
<6>[ 145.019984] usb 3-1.4: Product: HackRF One
<6>[ 145.019993] usb 3-1.4: Manufacturer: Great Scott Gadgets
Hi,
Im running an app called DFFOpera Omnia and after an update it closes just right after you tap it to open.
Ive collected logs and I hope someone will guide me. I already am ready to edit xml files but I dont really know whats making it crash before it starts.
Here are the logs via 3C all in one tool.
======================
Spoiler: Log
W/14:43:15.089 Asset path '/system/framework/com.android.location.provider.jar' does not exist or contains no resources.
W/14:43:15.089 Asset path '/system/framework/com.android.media.remotedisplay.jar' does not exist or contains no resources.
W/14:43:07.064 at com.google.android.gms.measurement.internal.zzfx.run(Unknown Source)
W/14:43:07.064 at java.util.concurrent.FutureTask.run(FutureTask.java:237)
W/14:43:07.064 at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:422)
W/14:43:07.064 at com.google.android.gms.measurement.internal.zzai.run(Unknown Source)
W/14:43:07.064 at com.google.android.gms.measurement.internal.zzim.zza(Unknown Source)
W/14:43:07.064 at com.google.android.gms.measurement.internal.zzij.zzc(Unknown Source)
W/14:43:07.064 at com.google.android.gms.measurement.internal.zzij.zzak(Unknown Source)
W/14:43:07.064 at com.google.android.gms.measurement.internal.zzij.zzah(Unknown Source)
W/14:43:07.064 at com.google.android.gms.common.stats.ConnectionTracker.unbindService(Unknown Source)
W/14:43:07.064 at com.google.android.gms.common.stats.ConnectionTracker.zza(Unknown Source)
W/14:43:07.064 at android.content.ContextWrapper.unbindService(ContextWrapper.java:572)
W/14:43:07.064 at android.app.ContextImpl.unbindService(ContextImpl.java:2270)
W/14:43:07.064 at android.app.LoadedApk.forgetServiceDispatcher(LoadedApk.java:1135)
W/14:43:07.064 java.lang.IllegalArgumentException: Service not registered: [email protected]
W/14:43:07.064 Exception thrown while unbinding
D/14:43:02.289 attribute: is_first_launch = false
D/14:43:02.289 attribute: af_status = Organic
D/14:43:02.289 attribute: af_message = organic install
D/14:43:02.289 attribute: install_time = 2021-01-30 06:09:44.974
I/14:43:02.289 Untagging socket 41
I/14:43:00.989 Tagging socket 41 with tag 4e864ee00000000{82339054,0} uid -1, pid: 21367, getuid(): 10233
I/14:43:00.989 KnoxVpnUidStorageknoxVpnSupported API value returned is false
W/14:43:00.854 remove failed: ENOENT (No such file or directory) : /data/data/com.square_enix.android_googleplay.DFFOperaOmnian/files/AppEventsLogger.persistedevents
W/14:43:00.819 Asset path '/system/framework/com.android.location.provider.jar' does not exist or contains no resources.
W/14:43:00.819 Asset path '/system/framework/com.android.media.remotedisplay.jar' does not exist or contains no resources.
I/14:43:00.789 (HTTPLog)-Static: isSBSettingEnabled false
I/14:43:00.609 (HTTPLog)-Static: isSBSettingEnabled false
I/14:43:00.224 Untagging socket 55
I/14:43:00.224 Tagging socket 55 with tag 4e864ee00000000{82339054,0} uid -1, pid: 21367, getuid(): 10233
I/14:43:00.224 Untagging socket 55
I/14:43:00.224 Tagging socket 55 with tag 4e864ee00000000{82339054,0} uid -1, pid: 21367, getuid(): 10233
I/14:43:00.224 Untagging socket 55
I/14:43:00.224 Tagging socket 55 with tag 4e864ee00000000{82339054,0} uid -1, pid: 21367, getuid(): 10233
I/14:43:00.224 Untagging socket 55
I/14:43:00.224 Tagging socket 55 with tag 4e864ee00000000{82339054,0} uid -1, pid: 21367, getuid(): 10233
I/14:43:00.224 Untagging socket 55
I/14:43:00.224 Tagging socket 55 with tag 4e864ee00000000{82339054,0} uid -1, pid: 21367, getuid(): 10233
I/14:43:00.224 Untagging socket 55
I/14:43:00.224 Tagging socket 55 with tag 4e864ee00000000{82339054,0} uid -1, pid: 21367, getuid(): 10233
I/14:43:00.224 Untagging socket 55
I/14:43:00.224 Tagging socket 55 with tag 4e864ee00000000{82339054,0} uid -1, pid: 21367, getuid(): 10233
I/14:43:00.224 Untagging socket 55
I/14:43:00.224 Tagging socket 55 with tag 4e864ee00000000{82339054,0} uid -1, pid: 21367, getuid(): 10233
I/14:43:00.224 Untagging socket 55
I/14:43:00.224 Tagging socket 55 with tag 4e864ee00000000{82339054,0} uid -1, pid: 21367, getuid(): 10233
I/14:43:00.224 Untagging socket 55
I/14:43:00.224 Tagging socket 55 with tag 4e864ee00000000{82339054,0} uid -1, pid: 21367, getuid(): 10233
D/14:43:00.214 getTelephonyProperty: return propVal='null' phoneId=0 property='gsm.operator.alpha' defaultVal='' prop=
D/14:43:00.214 getTelephonyProperty: return propVal='null' phoneId=0 property='gsm.sim.operator.alpha' defaultVal='' prop=
I/14:43:00.209 Rejecting re-init on previously-failed class java.lang.Class<com.appsflyer.oaid.OaidClient$1>
I/14:43:00.209 Rejecting re-init on previously-failed class java.lang.Class<com.appsflyer.oaid.OaidClient$1>
W/14:43:00.164 Asset path '/system/framework/com.android.location.provider.jar' does not exist or contains no resources.
W/14:43:00.164 Asset path '/system/framework/com.android.media.remotedisplay.jar' does not exist or contains no resources.
I/14:43:00.119 KnoxVpnUidStorageknoxVpnSupported API value returned is false
I/14:43:00.114 (HTTPLog)-Static: isSBSettingEnabled false
D/14:43:00.099 getTelephonyProperty: return propVal='null' phoneId=0 property='gsm.operator.alpha' defaultVal='' prop=
W/14:43:00.089 Format /topics/topic-name is deprecated. Only 'topic-name' should be used in S.
W/14:43:00.084 initStore should have been called before calling setUserID
W/14:43:00.084 remove failed: ENOENT (No such file or directory) : /data/data/com.square_enix.android_googleplay.DFFOperaOmnian/files/AppEventsLogger.persistedevents
I/14:43:00.079 Timeline: Activity_idle id: [email protected] time:3416968
W/14:43:00.074 Format /topics/topic-name is deprecated. Only 'topic-name' should be used in S.
W/14:43:00.074 Format /topics/topic-name is deprecated. Only 'topic-name' should be used in S.
D/14:43:00.069 *FMB* isFloatingMenuEnabled return false
D/14:43:00.069 *FMB* isFloatingMenuEnabled mFloatingMenuBtn : null
D/14:43:00.064 FCM Registration Token: dloNZu5lQ6W6r82-KKM_Be:APA91bFzhvuAdMkxjAW3haxDXXA1QII-L7fyXWzXKjbdZFGYEJ6JkQ0yvCf4TYwvMD4hr_bG5srdbDNRm-RK0FYiLsZCMvFQsbK8Qr3SUz3oph4r3rN6OcjSRYp59khRVKc4mZqlKHRd
V/14:43:00.039 updateVisibility : ActivityRecord{3312f3bd [email protected] {com.square_enix.android_googleplay.DFFOperaOmnian/com.square_enix.android_googleplay.DFFOperaOmnian.DeltaActivity}} show : false
D/14:43:00.034 onStop was called
I/14:43:00.024 [0,com.square_enix.android_googleplay.DFFOperaOmnian.DeltaActivity]
D/14:43:00.019 onPause was called
D/14:43:00.019 onPause was called
I/14:43:00.014 KnoxVpnUidStorageknoxVpnSupported API value returned is false
I/14:43:00.014 Tag Manager is not found and thus will not be used
I/14:43:00.009 [0,com.square_enix.android_googleplay.DFFOperaOmnian.DeltaActivity]
D/14:42:59.999 Deep Linking: scheme is: null
D/14:42:59.994 Initializing AppsFlyer SDK: (v5.4.3.50)
I/14:42:59.939 (HTTPLog)-Static: isSBSettingEnabled false
W/14:42:59.939 remove failed: ENOENT (No such file or directory) : /data/data/com.square_enix.android_googleplay.DFFOperaOmnian/app_SmartBeat/start
W/14:42:59.919 Asset path '/system/framework/com.android.location.provider.jar' does not exist or contains no resources.
W/14:42:59.919 Asset path '/system/framework/com.android.media.remotedisplay.jar' does not exist or contains no resources.
D/14:42:59.874 taskAffinity => com.square_enix.android_googleplay.DFFOperaOmnian
D/14:42:59.874 sourceDir => /data/app/com.square_enix.android_googleplay.DFFOperaOmnian-2/base.apk
D/14:42:59.874 publicSourceDir => /data/app/com.square_enix.android_googleplay.DFFOperaOmnian-2/base.apk
D/14:42:59.874 processName => com.square_enix.android_googleplay.DFFOperaOmnian
D/14:42:59.874 permission => null
D/14:42:59.874 manageSpaceActivityName => null
D/14:42:59.874 dataDir => /data/data/com.square_enix.android_googleplay.DFFOperaOmnian
D/14:42:59.874 className => com.square_enix.android_googleplay.DFFOperaOmnian.DeltaApplication
D/14:42:59.874 backupAgentName => null
D/14:42:59.864 *FMB* installDecor flags : -2139029248
D/14:42:59.864 *FMB* installDecor mIsFloating : false
D/14:42:59.849 Metadata value : none
I/14:42:59.844 KnoxVpnUidStorageknoxVpnSupported API value returned is false
I/14:42:59.844 KnoxVpnUidStorageknoxVpnSupported API value returned is false
I/14:42:58.994 adb shell setprop debug.firebase.analytics.app com.square_enix.android_googleplay.DFFOperaOmnian
I/14:42:58.994 To enable faster debug mode event logging run:
I/14:42:58.994 To enable debug logging run: adb shell setprop log.tag.FA VERBOSE
I/14:42:58.994 App measurement is starting up, version: 19000
W/14:42:58.934 libDelta.so: unused DT entry: type 0x6fffffff arg 0x3
W/14:42:58.934 libDelta.so: unused DT entry: type 0x6ffffffe arg 0x17f158
D/14:42:58.929 new AppsFlyerConversionListener()
W/14:42:58.899 remove failed: ENOENT (No such file or directory) : /data/data/com.square_enix.android_googleplay.DFFOperaOmnian/files/AppEventsLogger.persistedevents
I/14:42:58.879 (HTTPLog)-Static: isSBSettingEnabled false
I/14:42:58.879 (HTTPLog)-Static: isSBSettingEnabled false
I/14:42:58.879 (HTTPLog)-Thread-4157-386870868: SMARTBONDING_FEATURE_ENABLED is true
I/14:42:58.879 (HTTPLog)-Thread-4158-445415933: SMARTBONDING_FEATURE_ENABLED is true
I/14:42:58.879 (HTTPLog)-Thread-4157-386870868: SmartBonding Enabling is false, SHIP_BUILD is true, log to file is false, DBG is false
I/14:42:58.879 (HTTPLog)-Thread-4158-445415933: SmartBonding Enabling is false, SHIP_BUILD is true, log to file is false, DBG is false
I/14:42:58.879 (HTTPLog)-Static: isShipBuild true
I/14:42:58.879 (HTTPLog)-Static: isShipBuild true
I/14:42:58.879 (HTTPLog)-Static: isSBSettingEnabled false
I/14:42:58.879 (HTTPLog)-Static: isSBSettingEnabled false
W/14:42:58.844 You haven't set a value for AdvertiserIDCollectionEnabled. Set the flag to TRUE if you want to collect Advertiser ID for better advertising and analytics results. To request user consent before collecting data, set the flag value to FALSE, then change to TRUE once user consent is received. Learn more: https://developers.facebook.com/doc...tarted-app-events-android#disable-auto-events.
W/14:42:58.844 Please set a value for AutoLogAppEventsEnabled. Set the flag to TRUE if you want to collect app install, app launch and in-app purchase events automatically. To request user consent before collecting data, set the flag value to FALSE, then change to TRUE once user consent is received. Learn more: https://developers.facebook.com/doc...tarted-app-events-android#disable-auto-events.
W/14:42:58.839 FacebookActivity is not declared in the AndroidManifest.xml. If you are using the facebook-common module or dependent modules please add com.facebook.FacebookActivity to your AndroidManifest.xml file. See https://developers.facebook.com/docs/android/getting-started for more info.
I/14:42:58.829 FirebaseApp initialization successful
D/14:42:57.784 Added TimaKeyStore provider
D/14:42:57.784 TimaSignature is unavailable
E/14:42:57.769 [DEBUG] get_category: variable seinfo: default sensitivity: NULL, cateogry: NULL
I/14:42:57.764 KNOX_SDCARD not a persona
I/14:42:57.764 KNOX_SDCARD checking this for 10233
E/14:42:57.764 accessInfo : 0
I/14:42:57.764 Function: selinux_compare_spd_ram , priority [2] , priority version is VE=SEPF_SM-N910C_5.1.1_0069
E/14:42:57.764 v2
E/14:42:57.764 MountEmulatedStorage()
Thanks