Related
What are some really thin cases out there? I just want moderate protection while maintaining the thin profile of the EVO. So far, I've read about the Barely There, Cruzerlite, Diztronic, Incipio and various other TPU type cases.
Are there any others?
Try the, Cimo Gloss Back Flexible TPU Case for HTC Evo 4G LTE (Sprint) - Black, on Amazon. It is only like $9. Really thin, cut outs for the usb, camera, is not perfect, but real sleek and thin. Another plus, for me anyways, is that the power button and volume rocker, are covered. Some cases have these cut out, another place dirt and dust can get it. Not perfect case, but for $9 can't really complain.
Just noticed on Amazon that they now have the, GreatShield Guardian S Series Slim Fit S-Line Design TPU Case for HTC EVO 4G LTE (Black)!! I had a similar case on my EVO 3D and it was amazing. Going to order me one right now lol
clankfu said:
What are some really thin cases out there? I just want moderate protection while maintaining the thin profile of the EVO. So far, I've read about the Barely There, Cruzerlite, Diztronic, Incipio and various other TPU type cases.
Are there any others?
Click to expand...
Click to collapse
Hands down the best thin case money can buy is the Case Mate Barely There, I used on on my Evo3d and now my LTE, Covers it enough to not scratch it to hell, but still shows the beauty of the phone. Scour the net for a coupon to use on their site.
I have a diztronic as well, too large for me, and makes it hard to use the buttons in my opinion.
th3b055 said:
Try the, Cimo Gloss Back Flexible TPU Case for HTC Evo 4G LTE (Sprint) - Black, on Amazon. It is only like $9. Really thin, cut outs for the usb, camera, is not perfect, but real sleek and thin. Another plus, for me anyways, is that the power button and volume rocker, are covered. Some cases have these cut out, another place dirt and dust can get it. Not perfect case, but for $9 can't really complain.
Just noticed on Amazon that they now have the, GreatShield Guardian S Series Slim Fit S-Line Design TPU Case for HTC EVO 4G LTE (Black)!! I had a similar case on my EVO 3D and it was amazing. Going to order me one right now lol
Click to expand...
Click to collapse
They sell these on eBay for $2.79 and free shipping. They are awesome. I bought every color!
Sent from my EVO LTE using Tapatalk 2
I have always been a fan of Incipio Feather and Case Mate Barely there as well but I just tried the Amzer Shellster case and holster combo and I love it. The case itself is a lot like the Case Mate Barely There but the kick stand is easier to get to and the holster is awesome too.
I don't know how thin you want but i find the otterbox commuter case pretty thin compared to some out there and love the protection it gives a well.
CBRRider said:
I don't know how thin you want but i find the otterbox commuter case pretty thin compared to some out there and love the protection it gives a well.
Click to expand...
Click to collapse
How much bulk does the Commuter add compared to a TPU case?
clankfu said:
How much bulk does the Commuter add compared to a TPU case?
Click to expand...
Click to collapse
I don't have a TPU case to compare it to but from the pictures, i wouldn't say much more. Maybe a mm or two at the most? It's a very clean and lightweight case. I feel much better having it on now compared to it being naked. Had a buddy pick it up and was shocked to feel how it felt lighter and thinner than his own iphone4s. But they should have them back in stock in the stores now...they were on back order for weeks for a while.
+1 for CaseMate. I have one from Sprint. It was pricey, but it really is thin and works great!
Sent from my EVO using xda app-developers app
I love my cruzerlite - I don't think it adds much bulk at all and it provides some character to the phone as well, without just being all-black.
I have both the Diztronic and the cimo case and I can tell you the Diztronic is def a little thinner. It doesnt add much bulk at all and works well against scratches and such. I misplaced it when I switched to a Seidio hard case, but the Seidio case sucks so im going back to tpu. This time im going to try the Incipio case and see how I like it. I would like to try the CaseMate barely there case but the thought of having the top and bottom exposed scares the crap out of me. The corners arent really covered and thats where phones tend to take the most damage when dropped.
I've been using the snap case by spigen. Basically the same as the "barely there" cases in design.
I also have the blue rubber case that sprint sent out, and the androidified tpu cases that I've never used.. This case is smaller then those, Can hardly even tell theres a case on it looking at it head on.
http://www.spigen.com/cell-phone/htc/htc-evo-4g-lte-snap-case-series.html
If Spigen came out with the Ultra Thin Air case for the LTEvo like they did for the One X, then I would jump on it in a minute. I want something like this that is very thin, ultra thin
Spigen HTC One X Ultra Thin Air
Just ordered this off Amazon for $10 and I have to say that this is an amazing case. The fit and feel is second to none and I like the angled corners of the case. It has a nice rubberized finish and fingerprints don't show. I'm getting used to the design on the back...I wasn't a fan at first. I think anyone would be happy to have this in their case line-up.
http://www.amazon.com/Spigen-Samsung-Galaxy-Protective-Premium/dp/B00DCIY5H6/ref=sr_1_6?ie=UTF8&qid=1390177928&sr=8-6&keywords=note+3+case
I like it as well...I bought it and the Glas.TR screen protector. Thoroughly pleased with both products!
bizkitlimped said:
I like it as well...I bought it and the Glas.TR screen protector. Thoroughly pleased with both products!
Click to expand...
Click to collapse
Its really lukin very impressive and nice one... you got this TR glass with the case inclusive or you bought it separately...
i also just bought it recently its probably my favorite case i dont know why. i have the slim armour and neo hybrid but i prefer this one for some odd reason.
Jimmy2u said:
Its really lukin very impressive and nice one... you got this TR glass with the case inclusive or you bought it separately...
Click to expand...
Click to collapse
bought both off of amazon.
I wonder which one is heavier bounce case vs ultra slim fit case ?
That looks impressive ... but not as well as NEO one (In my mind)
Sent from my SM-N900 using Tapatalk
I have the bounce case and its great. Its not to thick, provides enough protection and covers the volume and power buttons. Works great and with a good price.
i'm digging this case too. I only dropped this phone while I was running, it slid on the front of the phone for 5 feet and didn't get a scratch or crack.
I dropped this phone a few times with this case. No damage. The case is a typical tpu case but with a nice design and pattern.
So I bought the Spigen slim armor with kickstand case just recently and found that it is rather a thick case and added bulk to the N6. It in turns made the N6 not be able to fit the car mount I bought. Anyone got recommendation for a good slim case?
Car mount: http://www.amazon.com/gp/product/B00HRKI5V2?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
Ringke Slim Case.
But keep in mind. Slim cases like this offers less protection.
I really like my Diztronic case. It's thin and feels well protected. A few videos on YouTube where people do drop tests and it came out without a scratch.
Sent from my Nexus 6 using Tapatalk
I got the spigen hybrid. Fits nice with flush buttons and see through nack. Looks great
Sent from my Nexus 6 using Tapatalk
MrBrady said:
I really like my Diztronic case. It's thin and feels well protected. A few videos on YouTube where people do drop tests and it came out without a scratch.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Got the diztronic... its not like its slim
The slimmest i have is ringke
Try Orzly case, it is very very thin.
The Ringke Max is actually pretty 'slim' with a lot of protection. If you want close to naked feel, then the Ringke Slim might be best, but really not that much protection.
PHATLET
vboyz103 said:
So I bought the Spigen slim armor with kickstand case just recently and found that it is rather a thick case and added bulk to the N6. It in turns made the N6 not be able to fit the car mount I bought. Anyone got recommendation for a good slim case?
Car mount: http://www.amazon.com/gp/product/B00HRKI5V2?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
Click to expand...
Click to collapse
I bought the Spigen Ultra Hybrid (clear), Thin Fit (clear), Slim Armor and S Wallet. IMO the Slim Armor fit and looked the best, but FAT. The TPUs just made the phone uber FAT(er). The wallet hinge/flap/binder thing is too loose and flabby [I wanted tight form fitting].
I ordered several generic gel jelly slim TPU.
First one to arrive is one with a logo that reads INSTEN and I am very impressed by it.
It's tight (queue up Micheal Meyers), lip is thin and holds on to the frame without going over on to the glass, barely raised ever so slightly higher than the screen.
It makes the screen/viewing pop out (it might be the color I chose, yellow).
The cutouts are great, the thinly covered raised areas over the power and volume rocker are just right (if you have the slim armor you might experience what I have, where touching the buttons is just too sensitive).
Grippy and sturdy. Knocked some on the table, I'd use it to press some buttons, sure..
I might go order more colors.
Usually I like Goospery Mercury Gel TPU cases on my phones, but haven't found any made for the N6.
EDIT: easy in and out from pocket.
Thanks guys for your suggestions. I think I'm going to go with the slick wraps full body because it does not add any bulk and provide some protection.
clockcycle said:
I bought the Spigen Ultra Hybrid (clear), Thin Fit (clear), Slim Armor and S Wallet. IMO the Slim Armor fit and looked the best, but FAT. The TPUs just made the phone uber FAT(er). The wallet hinge/flap/binder thing is too loose and flabby [I wanted tight form fitting].
I ordered several generic gel jelly slim TPU.
First one to arrive is one with a logo that reads INSTEN and I am very impressed by it.
It's tight (queue up Micheal Meyers), lip is thin and holds on to the frame without going over on to the glass, barely raised ever so slightly higher than the screen.
It makes the screen/viewing pop out (it might be the color I chose, yellow).
The cutouts are great, the thinly covered raised areas over the power and volume rocker are just right (if you have the slim armor you might experience what I have, where touching the buttons is just too sensitive).
Grippy and sturdy. Knocked some on the table, I'd use it to press some buttons, sure..
I might go order more colors.
Usually I like Goospery Mercury Gel TPU cases on my phones, but haven't found any made for the N6.
EDIT: easy in and out from pocket.
Click to expand...
Click to collapse
That INSTEN case is identical to the Caseology cases. Probably made in china, and companies just put their own name on it. But they look OK with medium protection.
vboyz103 said:
Thanks guys for your suggestions. I think I'm going to go with the slick wraps full body because it does not add any bulk and provide some protection.
Click to expand...
Click to collapse
I'm not doubting your choice, as it's your phone. But any "protection" you get from a skin will be just to prevent scratches and no drop protection. Good luck.
wolfen69 said:
That INSTEN case is identical to the Caseology cases. Probably made in china, and companies just put their own name on it. But they look OK with medium protection..
Click to expand...
Click to collapse
I dont have the caseology, but from the images I can agree, sans dimple. It's a good thing being at 1/3rd the price. I went ahead and bought green and black as well. It is so far my fave case.
I'll add, you know the form, shape that the phone has, makes it fit well in the hand and really gives it that unique feeling that it is a much smaller phone. This case INSTEN keeps that feeling intact..
MrBrady said:
I really like my Diztronic case. It's thin and feels well protected. A few videos on YouTube where people do drop tests and it came out without a scratch.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
I also really like the diztronic case. Minimal and functional.
I actually have the carved case and it's really slim and seems somewhat protective. Especially since it's made of real wood!
CASE
SUPCASE UNICORE BEETLE is pretty sweet!
WINEMK68 said:
SUPCASE UNICORE BEETLE is pretty sweet!
Click to expand...
Click to collapse
Agreed. Fairly protective without being too bulky. Good grip too.
Does anyone have a recommendation for a case that preserves the top heaviness and dramatic tapering of thickness at the bottom of the phone? Basically I'm as concerned about drop protection as preserving the original "feel" of the phone.
Was just Wondering What Case Has Provided You With The Best Protection With Your Phone? Was Just Wondering Cause I Have The Otter box Commuter And Just Wanted To Make Sure I Chose The Best Case That Will Protect My Phone. Thanks for the feedback! I will hit that like button.
Any cheap rubber or plastic case that is higher on all four sides than the screen will protect the phone amazingly. After that it is just a matter of style and materials to your preference IMHO. A 1 dollar case off ebay or aliexpress will protect the phone fine. It might look like crap but it will protect the phone AFAIK.
Do you care only for protection or also for compactness?
First of all make sure the case you want to buy is military grade tested.
For pure protection you should buy a case with a front tpu cover like poetic revolution, otterbox got one i think as well.
If you care for protection but also for compactness then i would go for UAG, Evutec or otterbox symmetry or spigen slim armor if on limited budget. There are more, i am just naming a few.
Go with the "Unicorn Beetle" case. It's compact and hugs the phone great. Great protection, screen protector and comes with a strong holster. I've had this case for all of my phones. Great product and the price is right on ebay for about 17 to 25 dollars!
http://www.ebay.com/itm/SUPCASE-Uni...172310?hash=item2caedb5b16:g:ifEAAOSwgY9Xd~CX
amirprog said:
Do you care only for protection or also for compactness?
First of all make sure the case you want to buy is military grade tested.
For pure protection you should buy a case with a front tpu cover like poetic revolution, otterbox got one i think as well.
If you care for protection but also for compactness then i would go for UAG, Evutec or otterbox symmetry or spigen slim armor if on limited budget. There are more, i am just naming a few.
Click to expand...
Click to collapse
I just want protection.
HolyGhostBoy1 said:
I just want protection.
Click to expand...
Click to collapse
Then aside of defender i'd check these as well (full protection):
http://www.poeticcases.com/revolution-59
http://www.lovemeicase.com/index.php?route=product/product&path=87_165&product_id=55357
http://www.lovemeicase.com/index.php?route=product/product&path=87_165&product_id=55346
midnightrider said:
Any cheap rubber or plastic case that is higher on all four sides than the screen will protect the phone amazingly. After that it is just a matter of style and materials to your preference IMHO. A 1 dollar case off ebay or aliexpress will protect the phone fine. It might look like crap but it will protect the phone AFAIK.
Click to expand...
Click to collapse
I completely agree with you. My case who had raised sides, protected my phone from a 2 ft drop on tiled floors. Dropped on bottom left corner first, then stopped screen down. To my amazement no crack or scratches on the front & back glass.
My case:
https://www.amazon.com/Ringke-Snug-Fit-Tailored-Ultra-Thin-Coverage/dp/B01ACAUFR0
I use the incipio dual pro on mine and it has survived many accidental drops Adds a tiny bit of size but I personally like the grip and size much more with the case on. Also power button and volume buttons on the case feel great and I never accidentally press them.
https://www.incipio.com/cases/smart...ries-case/dualpro-samsung-galaxy-s7-case.html
I got pelican voyager, paid too much for it but it's all I'll need
+1 on the Incipio DualPro.
I also like, in no particular order, the Vena Tough Armor Wave; Diztronic Voyeur Series; Spigen Tough Armor; and the OtterBox Symmetry Clear Series.
djh816 said:
I use the incipio dual pro on mine and it has survived many accidental drops Adds a tiny bit of size but I personally like the grip and size much more with the case on. Also power button and volume buttons on the case feel great and I never accidentally press them.
https://www.incipio.com/cases/smart...ries-case/dualpro-samsung-galaxy-s7-case.html
Click to expand...
Click to collapse
you made a good choice! I use my Otterbox Commuter every day. It's always my first choice of case when I get a new phone. Great protection, but not as bulky as a Defender case.
RebDovid said:
+1 on the Incipio DualPro.
I also like, in no particular order, the Vena Tough Armor Wave; Diztronic Voyeur Series; Spigen Tough Armor; and the OtterBox Symmetry Clear Series.
Click to expand...
Click to collapse
Spigen tough armor are awesome cases. I had one for my S5. Love it.
I have a Rugged Armor for my S7 and love it as well.
I've personally been using a case-mate tough. Pretty good and the buttons feel great.
I'm using rhinoshield with no regrets
Sent from my SM-G930F using XDA-Developers mobile app
Puregear extreme dualtek
Sent from my SM-G930V using Tapatalk
Hey, personally, I'm using this Spigen case:
https://www.amazon.fr/gp/aw/d/B01A7ICWTQ?ref=olp_product_details
Really great and give a good protection for the phone.
Envoyé de mon SM-G930F en utilisant Tapatalk
Actually Commuter is a very protective case for your S7. I'm using it too. But you know that there is another series from Otterbox that is more protective but also more bulky than Commuter, that is Defender.
I have an Artech21 Little Rock for my "rugged" case. It's "Military Grade" and whatever other fancy catchphrases you wanna use. But I don't put much stock into those phrases... It's fairly difficult to install/remove. Because of that, the phone won't pop out, even if you were to throw it as hard as you can across the room (that's not to say the phone would survive inside). But the case IS plenty strong. Honestly, my only 2 complaints are that A) the tempered glass is like a half inch more narrow than the screen (but at the time of purchase, not a single tempered glass screen protector covered edge to edge flawlessly (loss of sensitivity, haloing, etc.). And, B) I'm not a big fan of the designs. When other models like the Vivid Arkansas look so damn unique good. The Little Rock just looks super plain. Of the cases I own, the Little Rock is easily the strongest, while the Vivid Arkansas is much thinner, it looks MUCH better. And it still provides plenty of protection itself. And I can't speak for cases I don't own. But the Little Rock is easily the toughest. The Vivid Arkansas looks the best. And while it doesn't provide the hardcore protection of the Little Rock, it has saved my phone on a few drops, one I expected to be bad. But not a scratch
https://www.androidcentral.com/best-google-pixel-4a-cases
just delivered...
fronto said:
https://www.androidcentral.com/best-google-pixel-4a-cases
Click to expand...
Click to collapse
it'll add some colors to "just black"
mzsquared said:
it'll add some colors to "just black"
Click to expand...
Click to collapse
I'm sticking with the Spigen Tough Armor, same one I have on my 3A right now. Along with a 3 pack of Shieldbrainz screen protectors (I went through 3 of those for the 3A in the time I had it, got the 3a just after it dropped).
Edit: Just received the Spigen and compared the case to the 3A case I have. It's just a tad bit shorter in length and just a little thicker but everything else seems right on. The cutouts on the end are even about the same so this gives me some idea of the size difference (seems negligible).
fronto said:
https://www.androidcentral.com/best-google-pixel-4a-cases
Click to expand...
Click to collapse
So I have been on a bit of a shopping spree (oops). Thankfully Amazon US has free returns on cases. I currently have the:
DiMiK case: https://www.amazon.com/dp/B084S3ZY9G/ref=cm_sw_r_cp_tai_jbZmFbDRNDBWQ
Caseology Vault: https://www.amazon.com/dp/B083Q4SY5G/ref=cm_sw_r_cp_tai_5aZmFb8PPY0N6
Spigen Liquid Crystal: https://www.amazon.com/dp/B083N54J5Y/ref=cm_sw_r_cp_tai_OaZmFbVDVR3P1
And tomorrow I get the Cyrill Brick Case: https://www.amazon.com/dp/B083QQTQ3V/ref=cm_sw_r_cp_tai_5.YmFb2PCB9HQ
Quick notes and observations.
1) All of the cases are the exact same size and thickness.
2) The DiMiK case is as cheap as you would expect. No real corner protection or grip and the form is not perfect.
3) The vault is great quality but notably heavier than the other cases. Outside of the extra weight, my main concern is grip from this case. The texture adds no real grip to the phone. Form is perfect.
4) Liquid crystal also has almost perfect build quality with one small imperfection on the inside of a corner. Very light weight with great protection. The grip on this case is fantastic (important to me). Unfortunately I think it will get noticeably scuffed and will eventually turn yellow.
Q: Are caseology and spigen made by the same company? The form, quality and packaging are almost identical. The difference is the color, weight and grip.
I wish I had a solid color liquid crystal case. That is why I am trying the brick case. No perfect solution yet.
Thought I would share with everyone.
Uh60m Pilot said:
So I have been on a bit of a shopping spree (oops). Thankfully Amazon US has free returns on cases. I currently have the:
DiMiK case: https://www.amazon.com/dp/B084S3ZY9G/ref=cm_sw_r_cp_tai_jbZmFbDRNDBWQ
Caseology Vault: https://www.amazon.com/dp/B083Q4SY5G/ref=cm_sw_r_cp_tai_5aZmFb8PPY0N6
Spigen Liquid Crystal: https://www.amazon.com/dp/B083N54J5Y/ref=cm_sw_r_cp_tai_OaZmFbVDVR3P1
And tomorrow I get the Cyrill Brick Case: https://www.amazon.com/dp/B083QQTQ3V/ref=cm_sw_r_cp_tai_5.YmFb2PCB9HQ
Quick notes and observations.
1) All of the cases are the exact same size and thickness.
2) The DiMiK case is as cheap as you would expect. No real corner protection or grip and the form is not perfect.
3) The vault is great quality but notably heavier than the other cases. Outside of the extra weight, my main concern is grip from this case. The texture adds no real grip to the phone. Form is perfect.
4) Liquid crystal also has almost perfect build quality with one small imperfection on the inside of a corner. Very light weight with great protection. The grip on this case is fantastic (important to me). Unfortunately I think it will get noticeably scuffed and will eventually turn yellow.
Q: Are caseology and spigen made by the same company? The form, quality and packaging are almost identical. The difference is the color, weight and grip.
I wish I had a solid color liquid crystal case. That is why I am trying the brick case. No perfect solution yet.
Thought I would share with everyone.
Click to expand...
Click to collapse
I ordered the clear spigen ultra hybrid
https://www.amazon.ca/dp/B083MT5SJX/ref=cm_sw_r_cp_apa_i_Ti3mFbSV4S21M
The brick case looks cool with the switchable buttons
BigOkie said:
I'm sticking with the Spigen Tough Armor, same one I have on my 3A right now. Along with a 3 pack of Shieldbrainz screen protectors (I went through 3 of those for the 3A in the time I had it, got the 3a just after it dropped).
Edit: Just received the Spigen and compared the case to the 3A case I have. It's just a tad bit shorter in length and just a little thicker but everything else seems right on. The cutouts on the end are even about the same so this gives me some idea of the size difference (seems negligible).
Click to expand...
Click to collapse
Can you post a link to those screen protectors?
kc6wke said:
Can you post a link to those screen protectors?
Click to expand...
Click to collapse
https://www.amazon.com/gp/product/B08D3W54DB/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
Uh60m Pilot said:
Q: Are caseology and spigen made by the same company? The form, quality and packaging are almost identical. The difference is the color, weight and grip.
Click to expand...
Click to collapse
I believe so. If you go to the Spigen website, at the top there are links to Caseology and Cyrill, as well as the Spigen Gearlock collection, and all the websites are styled and formatted identically.
That and: https://trademarks.justia.com/owners/spigen-inc-2959513/
I grabbed the pastel black dbrand skin for mine. Phone's plastic and should survive a drop so no case for me.
BigOkie said:
I'm sticking with the Spigen Tough Armor, same one I have on my 3A right now. Along with a 3 pack of Shieldbrainz screen protectors (I went through 3 of those for the 3A in the time I had it, got the 3a just after it dropped).
Edit: Just received the Spigen and compared the case to the 3A case I have. It's just a tad bit shorter in length and just a little thicker but everything else seems right on. The cutouts on the end are even about the same so this gives me some idea of the size difference (seems negligible).
Click to expand...
Click to collapse
I just order the Spigen Rugged Armor this morning. https://www.amazon.com/Spigen-Rugged-Armor-Designed-Google/dp/B083N5DD7K/ref=sr_1_1?dchild=1&keywords=spigen+pixel+4a&qid=1597678531&s=electronics&sr=1-1
I have been happy with my nearly Spigen case for my OnePlus3T. I wish there was a bright red or blue besides just black...but I can live with black. I would have considered the Tough Armor If I had found that in my amazon searches. I like how the Tough Armor gets wider around the camera bump to protect it.
castlefox said:
I just order the Spigen Rugged Armor this morning. https://www.amazon.com/Spigen-Rugged-Armor-Designed-Google/dp/B083N5DD7K/ref=sr_1_1?dchild=1&keywords=spigen+pixel+4a&qid=1597678531&s=electronics&sr=1-1
I have been happy with my nearly Spigen case for my OnePlus3T. I wish there was a bright red or blue besides just black...but I can live with black. I would have considered the Tough Armor If I had found that in my amazon searches. I like how the Tough Armor gets wider around the camera bump to protect it.
Click to expand...
Click to collapse
Tough Armor is here
kc6wke said:
Tough Armor is here
Click to expand...
Click to collapse
I don't know how that case retails for 39.99 on Spigen's website, and only 14.99 on Amazon, but I ordered one just in case it's a momentary mis-pricing.
Spigen Tough Armor is the way to go. I've dropped my pixel 4a twice on concrete with no issues. I like the way it feels and it performs. Just wish it came in other colors.
There are not a lot of quality choices out there for the pixel 4a., but luckily this one is top drawer.
Nylo
Got a Caseology Parallax for the wife. She wanted something to add some color to the black phone. Case fits really well and the case looks really nice (if you're into their colors), but it's kind of a bit slippery. I have a feeling it won't be her forever case, but it's a fine case and will probably be the one she uses until we discover her forever case. Buttons are plenty clicky and the phone is plenty protected without being insanely bulky (it's not insanely thin either - it's in the middle of the spectrum but towards the bukly end). She usually goes with a Speck Presidio Grip case, but wanted to try something new. If you don't need a grippy or minimal case, I'd recommend it.
It fits perfectly with an OMOTION or Orzero TGSP.
Got this from Amazon
https://www.amazon.com/dp/B086X647CC?ref=ppx_pop_mob_ap_share
2 cases for $8
Since I got my phones today and put these on- the fit well, corners are protected, covers the camera. Does everything a case should do
Did I mention it's $8 for 2 cases?
My biggest "look-for" is a case that will allow a phone ring holder to adhere to it securely. That rules out the Caseology Parallax unfortunately for me..
I got a spingen; Black thin; https://www.amazon.com/Spigen-Thin-Designed-Google-Pixel/dp/B083N3YT4Z#ace-g7448806443
I got the same one as above^ and two more from the Spigen brand. I love the quality feel on them. Definitely recommend Spigen.
I purchased the Caseology Vault case. Fits fine. The lip around the edge of the screen sometimes makes the gestures a little more difficult but I think I've adapted now.
kc6wke said:
Tough Armor is here
Click to expand...
Click to collapse
I would love to get the Tough Armor but that plastic stand seems iffy to me. I've seen reviews of the case and it looks a little flimsy and like it might break. If the back of the case was completely solid without it, it would be my go to no questions asked. For now I picked up a Caseology Parallax which is set to arrive on Monday (my phone was just delivered today) to see if I like it or if I want to switch over to the Spigen Rugged Armor.