Related
http://cgi.ebay.com/ws/eBayISAPI.dl...38080&ssPageName=STRK:MEWNX:IT#ht_3651wt_1260
Found this car mount for the G1. As opposed to the universal ones which are significantly bulkier and honestly dont look that good. This one is sleek and will let you open the G1 to keyboard mode without undocking he phone.
I've ordered it. I'll let you know in a few weeks
Any updated?
This thing looks great and cheap!
Nope. Thats the downfall with getting things from HK off Ebay. Takes forever.
I will post a review maybe take some pictures. I really hope it lets me open the screen and use it full out.
this is what i got :
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=110438371574
ordered it on 29th Nov, still no sign, tracking says : Shipped
Thats the downfall with getting things from HK off Ebay. Takes forever.
Click to expand...
Click to collapse
True!!
Both of those are a custom fit for the G1, but notice the design of them. You can't use the car charger while the phone is in the mount. The 'clip' is covering the charger port.
This one is designed to allow you to charge the G1 while it is in the mount:
http://www.g1depot.com/igrip-custom-fit-flexible-mount/3A78A5815.htm
mrhousto
__________________
Phone: T-mobile Black G1, Rooted
SPL: 1.33.2005
Radio: 2.22.19.26I
Recovery: Amon_RA's 1.5.0, w/switchrom
ROM:
1. Motorola Blur v1.1
2. Cyanogen 4.2.9.1
3. JesterBlur v1.2.5
4. MghtyMax 1.9.1
5. KiNgxKxKlair Eclair Hero Version 0.6
Card: 4GB class 6
mrhousto said:
Both of those are a custom fit for the G1, but notice the design of them. You can't use the car charger while the phone is in the mount. The 'clip' is covering the charger port.
This one is designed to allow you to charge the G1 while it is in the mount:
http://www.g1depot.com/igrip-custom-fit-flexible-mount/3A78A5815.htm
mrhousto
__________________
Phone: T-mobile Black G1, Rooted
SPL: 1.33.2005
Radio: 2.22.19.26I
Recovery: Amon_RA's 1.5.0, w/switchrom
ROM:
1. Motorola Blur v1.1
2. Cyanogen 4.2.9.1
3. JesterBlur v1.2.5
4. MghtyMax 1.9.1
5. KiNgxKxKlair Eclair Hero Version 0.6
Card: 4GB class 6
Click to expand...
Click to collapse
Do you own this? I assume you can open the G1 while its in the holder? And is it sturdy/work well? Held in place alright and whatnot?
tehseano said:
Do you own this? I assume you can open the G1 while its in the holder? And is it sturdy/work well? Held in place alright and whatnot?
Click to expand...
Click to collapse
I don't own one 'yet' because the site says it will be available around 12/30. Looking at the pic, it doesn't seem to interfere with the operation of the phone... meaning you can still slide it open as well as charge it.
I've decided to make a 'temporary' dock for my G1 until the one above is available. I used the back portion of a clear cover that I had laying around. I figured I would put it to some use since I had it!
Here are a few pics:
I got this one to use in my car and love it! Charger fits in and it can be rotated in any direction. Plus you can move it from car to car without messy window rings. http://www.amazon.com/gp/product/B001UGMTKC/ref=oss_T15_product
mrhousto said:
I've decided to make a 'temporary' dock for my G1 until the one above is available. I used the back portion of a clear cover that I had laying around. I figured I would put it to some use since I had it!
Here are a few pics:
Click to expand...
Click to collapse
That was a great idea. I got the cheap one off ebay and the cover does block the charge port. I am going to do a little dremel tooling on it to see if I can make it better. If not I will buy a couple of the cheap cases off ebay and try your mod.
The Ebay one also completely blocks the speaker. I will cut a hole for that too.
billquinn1 said:
That was a great idea. I got the cheap one off ebay and the cover does block the charge port. I am going to do a little dremel tooling on it to see if I can make it better. If not I will buy a couple of the cheap cases off ebay and try your mod.
The Ebay one also completely blocks the speaker. I will cut a hole for that too.
Click to expand...
Click to collapse
You can never go wrong with a dremel tool!! I didn't know that those ebay holders cover up the speaker too. It kinda makes the phone useless while its in there. I got the idea for the one I made off the proclip website. Rather than spending $30 bucks for theirs, I just made my own! I popped the trim off from around the heater/radio and used 3M double sided tape to secure the metal bracket that I bent to shape. Then used another piece of 3M to secure the back portion of the clear cover to the bracket. Of course, I put the 'Dual' sticker on there just for kicks!!!
I got myself a ProClip G1 mount.
http://www.proclipusa.com/brodit-de...h-cable-with-3-in-1-adapter-849868-17354.aspx
It is a little pricey but the build quality is great and has a swivel mount. And yes you can open the screen and access the keyboard while mounted. Only downside (besides the price) is that you have to remove the rubber dust cover from the mini-USB charging port on the G1/Dream. I was kind of ticked off when I found this out after ordering it but I have been without it for quite a while now and haven't had any problems. I usually carry this G1 in my pocket and sometimes on my holster (when my work G1 isn't on me).
tekkitan said:
I got myself a ProClip G1 mount.
http://www.proclipusa.com/brodit-de...h-cable-with-3-in-1-adapter-849868-17354.aspx
It is a little pricey but the build quality is great and has a swivel mount. And yes you can open the screen and access the keyboard while mounted. Only downside (besides the price) is that you have to remove the rubber dust cover from the mini-USB charging port on the G1/Dream. I was kind of ticked off when I found this out after ordering it but I have been without it for quite a while now and haven't had any problems. I usually carry this G1 in my pocket and sometimes on my holster (when my work G1 isn't on me).
Click to expand...
Click to collapse
A little pricey..... I guess!
hi all, i got myself one of these and it comes with a car charger. though i found the cord was not long enough from my cigarette lighter to windscreen.
http://www.amazon.co.uk/Dedicated-W...3?ie=UTF8&s=electronics&qid=1262888830&sr=8-3
mrhousto said:
Both of those are a custom fit for the G1, but notice the design of them. You can't use the car charger while the phone is in the mount. The 'clip' is covering the charger port.
This one is designed to allow you to charge the G1 while it is in the mount:
**Unable to post link due to my restrictions I guess. See mrhousto's original post**
mrhousto
Click to expand...
Click to collapse
So I didn't see anyone comment on this yet. But I went ahead and bought this due to the decent price and what appeared to be the ability to open it while mounted.
So the answer is definitely "yes" to everything I wanted from it.
Yes, it does allow you to open the screen while mounted.
Yes, the clip does hold the phone very well and it is pretty easy to put and remove the phone with one hand.
Yes, you can plug in a charger while mounted and you don't have to remove the little charger door to use it.
Yes, there is a hole in the back so the speaker/camera is exposed so I guess you could record video, or take pictures while driving if that is something you wanted to do. Also, the microphone on the bottom is not blocked in case you want to just use speakerphone while mounted.
Yes, it feels very solid and well made. It says it "Made in Germany" on all of the parts which makes me feel good. "The German's make good stuff!"
Yes, The body clip itself does come off the arm so you could in theory use this for a different phone assuming you can get just the body clip online.
No, you cannot use this with anything other then a regular sized battery/door. (hopefully this was obvious)
Overall, for $20-$25 (depending on shipping), this is an awesome mount for your G1. I haven't actually tried mounting it on my window yet but the big suction cup (~3 inches wide) with the pull lever thing look like they will work great.
Boogy
Ather said:
this is what i got :
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=110438371574
ordered it on 29th Nov, still no sign, tracking says : Shipped
True!!
Click to expand...
Click to collapse
I order this one and finally got it.
It doesn't seem to fit in the way the picture is. The picture shows the "big" tab at the bottom. The problem with this is that it covers the hole for the charger. Also for me it doesn't quite fit so the top tab doesn't clip on to anything and doesn't hold the phone.
If I put it in upside down then the small tab doesn't cover the hole for the charger and it seems to fit nice an snug. But when it is in upside down you can no longer slide it open as the bigger tab is clipped onto the front. That is no big deal for me any ways as I don't plan on opening it while it is in the holder in the car.
the perfect mount/ who needs a navigation system
I also went to g1depo.com and got the windshield mount, it arrived four days early and yes to all the major questions. Opening capability, charger connection, speakerphone/camera hole, and it is also sturdy and well made "German" to be exact. and only 25.00 with shipping. Winner!!!!!!!!!!!!!
zodagreat said:
I also went to g1depo.com and got the windshield mount, it arrived four days early and yes to all the major questions. Opening capability, charger connection, speakerphone/camera hole, and it is also sturdy and well made "German" to be exact. and only 25.00 with shipping. Winner!!!!!!!!!!!!!
Click to expand...
Click to collapse
I hate to burst your bubble but.....
http://www.shop4tech.com/item8622.html
$6 shipped and it fits the G1 perfectly (yes I actually have one). It's a universal design so it's plenty adjustable. Even if it's not as pretty as some it does the job for a fraction of the price.
benmyers2941 said:
I hate to burst your bubble but.....
http://www.shop4tech.com/item8622.html
$6 shipped and it fits the G1 perfectly (yes I actually have one). It's a universal design so it's plenty adjustable. Even if it's not as pretty as some it does the job for a fraction of the price.
Click to expand...
Click to collapse
thats nice and everything, wonderful price...but uuhh...its intended purpose are for navigation devices, although it may have no problem holding, I don't think it would allow all of the g1 usage in dock such as rotating landscape/portrait, opening/closing keyboard, charging with dual 3.5 headset jack/usb extention.
Are there any good carmounts that fit a g1 with the extended battery back cover?
Let's talk about cases and wireless changing - what works and what doesn't:
For example
Works
Generic charging back and cheap gel case works with Tylt charger
Generic charging back and cheap gel case works with LG hockey puck charger
Otterbox defender works with the tylt vu and qi sticker
Nillkin bumper case works with the Tylt wireless charger
Slim Armor works with the Tylt Vu
Qi sticker chip with generic eBay hockey puck (Powerbot clone) and it charges with Seidio Surface
Qi sticker (from GB) on OEM backing with Quick Circle Case (without the built in inductive) works on both the Tylt Vu as well as the LG WCP-300 puck.
Ringke slim case and with the 3 Coil wireless pad+original LG USB cable+2A Samsung charger (links in post #21)
but
Doesn't work
slim armor DIDNT work with Nokia Dt910
Works partially
3rd party quick circle case with wireless charging I got off of Ebay and ordered the WCD-100. Although it worked I kept
getting the center phone correctly message every time I put it on.
Best Buy Insignia TPU case has some trouble with the Tylt Vu. Wireless charging notification pops up frequently
How about posting here what we know works - and what doesn't. I'll update here from your posts so please make my life easier and give me something that I can just cut and paste.
cb1111 said:
Let's talk about cases and wireless changing - what works and what doesn't:
For example
Generic charging back and cheap gel case works with Tylt charger
Generic charging back and cheap gel case works with LG hockey puck charger
but
Does the generic charging back and the Tylt work with the Otterbox Defender? How about the Seidio Surface?
How about posting here what we know works.
Click to expand...
Click to collapse
You forgot about the Qi sticker chips for those who purchased.
I have a Qi sticker chip with generic eBay hockey puck (Powerbot clone) and it charges with Seidio Surface.
Overall, I think wireless charging will work with any case so as long there is no interference such as magnets or something.
My otterbox defender works with the tylt vu and qi sticker
Sent from my LG-D851 using XDA Free mobile app
My slim armor DIDNT work with Nokia Dt910. Had the on off issue. Ordered a lg wcd100 will see what happens.
EDIT : forgot to add that i got the slow charging message when using the case.
I have a 3rd party quick circle case with wireless charging I got off of Ebay and ordered the WCD-100. Although it worked I kept
getting the center phone correctly message every time I put it on. Returned that to Amazon and ordered the Tylt. If I continue to have
problems with that one when I get it then I'll know it's the case that's the issue.
This thread will be hard to follow just like the "What wireless charger works best with the G3" thread. I had to read that thread over and over. lol A list in the OP would be nice but a little time consuming to make I guess.
Nillkin bumper case works with the Tylt wireless charger. I will test the Insignia case at some point.
sweets55 said:
This thread will be hard to follow just like the "What wireless charger works best with the G3" thread. I had to read that thread over and over. lol A list in the OP would be nice but a little time consuming to make I guess.
Nillkin bumper case works with the Tylt wireless charger. I will test the Insignia case at some point.
Click to expand...
Click to collapse
Good point. I'll update the firtst post every couple of days.
xlxcrossing said:
My slim armor DIDNT work with Nokia Dt910. Had the on off issue. Ordered a lg wcd100 will see what happens
Click to expand...
Click to collapse
Doesn't matter if you use no case, the Nokia DT910 will do that with this phone.
Gvndeb60 said:
Doesn't matter if you use no case, the Nokia DT910 will do that with this phone.
Click to expand...
Click to collapse
Could you let me know if the slim armor case work with the wcd-100 wireless charger?
Slim Armor works with the Tylt Vu.
Best Buy Insignia TPU case has some trouble with the Tylt Vu. Wireless charging notification pops up frequently.
sweets55 said:
This thread will be hard to follow just like the "What wireless charger works best with the G3" thread. I had to read that thread over and over. lol A list in the OP would be nice but a little time consuming to make I guess.
Nillkin bumper case works with the Tylt wireless charger. I will test the Insignia case at some point.
Click to expand...
Click to collapse
cb1111 said:
Good point. I'll update the firtst post every couple of days.
Click to expand...
Click to collapse
sweets55 giving the OP more work? LOL.
OP: have fun updating the post every so often. I've been in that position before. Lol. Also, you didnt update first post with my post in regards to Seidio Surface working.
iazybandit said:
sweets55 giving the OP more work? LOL.
OP: have fun updating the post every so often. I've been in that position before. Lol. Also, you didnt update first post with my post in regards to Seidio Surface working.
Click to expand...
Click to collapse
It should cut down on the same questions and not everyone has time to read a long thread. If OP didn't want to do it I could have done it
Maybe the OP also needs to add "a case and charger might work for someone and not another person. I guess depending on the sticker/placement".
j76ms said:
Best Buy Insignia TPU case has some trouble with the Tylt Vu. Wireless charging notification pops up frequently.
Click to expand...
Click to collapse
I have the same combo and seems to be working fine for me. I'll try another charge tonight.
iazybandit said:
sweets55 giving the OP more work? LOL.
OP: have fun updating the post every so often. I've been in that position before. Lol. Also, you didnt update first post with my post in regards to Seidio Surface working.
Click to expand...
Click to collapse
I apologize for not updating the first thread within microseconds of someone posting - sheesh.
In order to make this thread worthwhile, we really need more information on some of the more obscure combinations. Stickers, for example, can come from multiple vendors and each may be a different quality. I'd suggest adding a link for no-name products. I'll continue to update the first post every couple of days for a while until we have a good representation of products.
I am using this OEM rear plate.
I am also using the Best Buy Insignia TPU case.
The charger is the Tylt Vu.
The Tylt works fine without the case on the phone but has trouble with this case.
Slim Armor works with the Qi sticker and the Amazon Cheotech charger....
cb1111 said:
I apologize for not updating the first thread within microseconds of someone posting - sheesh.
In order to make this thread worthwhile, we really need more information on some of the more obscure combinations. Stickers, for example, can come from multiple vendors and each may be a different quality. I'd suggest adding a link for no-name products. I'll continue to update the first post every couple of days for a while until we have a good representation of products.
Click to expand...
Click to collapse
It was a joke. Calm down. And my comment about the Seidio was because you updated the original post with stuff that was posted after mine and thought you missed it.
As for the Qi sticker chips, there's only one source that makes them but obviously sold by many others.
Just got my official LG qi charger WCD-100. I really like it, it's stable, and charges quite fast for qi. I got it for a pretty good deal so I don't mind and this is my 3rd qi charger that i currently have and by far the best one. It's really nice because I can't place my phone on it the wrong way. You just put it on and you're done! No alignment bs like on my other ones.
Qi sticker (from GB) on OEM backing with Quick Circle Case (without the built in inductive) works on both the Tylt Vu as well as the LG WCP-300 puck.
Kind of curious: has anyone tried the G3 with an AirDock:
http://www.theairdock.com/
Wondering if the curved back presents any problems with adhering to the micro-suction surface of the dock.
I have one and the charging works great. Only issue is that if the pad or surface isn't clean the phone doesn't like to stay put. The surface is some kind of nano technology. In my opinion it needs to be improved and the magnets need to be improved. The curved back does limit the overall contact surface area but I am getting a new SUPCASE and I am hoping that the material will stick better.
I have the AirDock, and it does not work with my cheap, Chinese Qi charging sticker. The very same sticker works on my Tylt Vu, however. I'm curious what Qi receiver you guys are using.
Thanks!
I found a couple of posts here on XDA that indicated the magnets in the Air Dock interfere with the Qi stickers. Air Dock (the company) doesn't recommend the mount for use with the G3.
meyerweb said:
I found a couple of posts here on XDA that indicated the magnets in the Air Dock interfere with the Qi stickers. Air Dock (the company) doesn't recommend the mount for use with the G3.
Click to expand...
Click to collapse
Though on their website it clearly says supported (with additional hardware.) I assume this to mean with the QuickCircle charging case, which is horrendous and annoying. You are spot-on regarding the magnets. I asked if those can be removed, and support responded that they are necessary to keep the phone from sliding off. I am not convinced that is the case on the G3, because the phone slides off VERY easily without some sort of flat-back.
Sounds like G3 owners should just wait it out...
Me:
Howdy Howdy!
I noticed that the LG G3 is officially 'supported' (with additional hardware,) on your site, and I was curious if any developments have been made? I am still using the cheap Chinese sticker with my Tylt Vu, but of course that doesn't work on my original AirDock. Is there a recommended charging sticker, or do you guys still recommend the Circle case?
In all honesty, it's hard to recommend the naked G3 on the AirDock, because it can barely hold it. I have to clean my foam almost daily for it to stick, because the phone's back is curved. My friends with flat-back phones never seem to ever clean the foam and it works great.
Thank you!
-Steven
AirDock Support:
Hi Steven,
There are a couple things that are going to be better about Version 2.0 and the G3.
The transmitter in V2.0 will work well with that aftermarket receiver sticker. That's the biggest difference. It's an upgraded transmitter from V1.0
We will also be supplying a special version of V2.0 that will be curved to match the back of your G3 so that you can have the same grip strength as your flat backed phone owning friends!
Thanks
Me:
Whoa, that's awesome! I wish there was a trade-in option because I've been pretty bummed about this one, despite getting a few friends to pick one up for their more well-suited phones.
Thank you for the update!
Sounds great, but I already came up with my own solution. I grafted the Qi charger and phone clamp from this:
http://www.amazon.com/gp/product/B00M685JTG/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1 (made by the same company as the Tylt Vu)
With the sticks-anywhere micro suction base of this:
http://www.amazon.com/iOttie-Windsh...UTF8&qid=1417825105&sr=8-1&keywords=iottie+xl
My only real complaint is that the Qi emits a shrill beeeeep every time it gets power (i.e., when I turn the car on).
But if the Air Dock 2 described above had been available, I probably would have bought that one. Good news for future buyers.
ScrapMaker said:
Sounds like G3 owners should just wait it out...
Me:
Howdy Howdy!
I noticed that the LG G3 is officially 'supported' (with additional hardware,) on your site, and I was curious if any developments have been made? I am still using the cheap Chinese sticker with my Tylt Vu, but of course that doesn't work on my original AirDock. Is there a recommended charging sticker, or do you guys still recommend the Circle case?
In all honesty, it's hard to recommend the naked G3 on the AirDock, because it can barely hold it. I have to clean my foam almost daily for it to stick, because the phone's back is curved. My friends with flat-back phones never seem to ever clean the foam and it works great.
Thank you!
-Steven
AirDock Support:
Hi Steven,
There are a couple things that are going to be better about Version 2.0 and the G3.
The transmitter in V2.0 will work well with that aftermarket receiver sticker. That's the biggest difference. It's an upgraded transmitter from V1.0
We will also be supplying a special version of V2.0 that will be curved to match the back of your G3 so that you can have the same grip strength as your flat backed phone owning friends!
Thanks
Me:
Whoa, that's awesome! I wish there was a trade-in option because I've been pretty bummed about this one, despite getting a few friends to pick one up for their more well-suited phones.
Thank you for the update!
Click to expand...
Click to collapse
I have the original airdock and have been using it with my G3 with no problems. I have a thin ringke case and use the airdock sticker and it charges fine. I'm considering getting the LG g3 slim guard case because I don't like having the sticker on my phone. I read someone on here write that the LG g3 slim guard case sticks to the airdock.
What Qi receiver are you using?
I'm using a replacement battery cover with qi sticker that I bought on Amazon. I'm guessing the company puts the sticker on an oem battery cover but it has qi and nfc
p1garcia said:
I'm using a replacement battery cover with qi sticker that I bought on Amazon. I'm guessing the company puts the sticker on an oem battery cover but it has qi and nfc
Click to expand...
Click to collapse
Strange, then you are the first with an AirDock to get it working with the Qi sticker. I have followed the threads very closely, and even AirDock says it won't work. Do you have a link to the sticker/cover you bought?
Thanks!
I do... But I don't think I can post it. But if you go to Amazon the seller is 38 Ave. It's an oem battery cover with qi and nfc. I also just ordered the LG g3 slim guard case. I've read it works and sticks to the airdock.
I finally received the original LG g3 slim guard case. It is for the US version. It works great with the airdock. Sticks to it and charges it with no issues.
p1garcia said:
I finally received the original LG g3 slim guard case. It is for the US version. It works great with the airdock. Sticks to it and charges it with no issues.
Click to expand...
Click to collapse
When you drive with GPS on, screen on, streaming music over bluetooth, does your battery stay charged? Mine won't even do that with a 2-amp USB connection. :/
ScrapMaker said:
When you drive with GPS on, screen on, streaming music over bluetooth, does your battery stay charged? Mine won't even do that with a 2-amp USB connection. :/
Click to expand...
Click to collapse
Regardless of the input to the Qi charger, current Qi coils output at most 1 amp. But to answer your question, no, mine slowly discharges under the conditions you describe. If you're doing that for a long period, unplug the cable from the dock and plug it into your phone.
meyerweb said:
Regardless of the input to the Qi charger, current Qi coils output at most 1 amp. But to answer your question, no, mine slowly discharges under the conditions you describe. If you're doing that for a long period, unplug the cable from the dock and plug it into your phone.
Click to expand...
Click to collapse
Dang. That's the entire time I've driving -- always. I should have done more research on Qi before ordering the sticker or any of these chargers. My Tylt has an almost impossible time keeping my phone charged when streaming and keeping the screen on at work. Nothing else going. Just heats up like crazy.
ScrapMaker said:
Dang. That's the entire time I've driving -- always. I should have done more research on Qi before ordering the sticker or any of these chargers. My Tylt has an almost impossible time keeping my phone charged when streaming and keeping the screen on at work. Nothing else going. Just heats up like crazy.
Click to expand...
Click to collapse
I don't seem to have any issues when I'm not streaming or using GPS. Just keeping the screen on seems to be fine. Make sure you're using a good USB cable. I found a couple of cheap ones I had wouldn't keep the phone charging consistently - it would keep cycling in and out of charge / discharge modes.
This won't help now, but there's a new Qi standard in development that is supposed to provide higher rates of charge. I do wonder how they'll deal with the extra heat, though.
Has anyone tried a magnetic car mount with their nexus 6? Specifically the Mountek nGroove Snap 3 - http://www.amazon.com/Mountek-nGroo...ablets/dp/B00MNXAFQ6/ref=cm_cr_pr_product_top
I used a magnetic mount with my Nexus 5 and loved it. I'm wondering how hard it would be to bend the magnet to work on the n6. Any input would be greatly appreciated!
I lost all hope using a magnetic dock with my N6..
If anyone got it to work do share..
EnterLordVader said:
I lost all hope using a magnetic dock with my N6..
If anyone got it to work do share..
Click to expand...
Click to collapse
I just ordered one, should be here Wednesday. I'll be sure to report back!
Yeah just ordered one today also, can't go wrong with the current price. If it doesn't work will just sell/give it away on craigslist/friends.
Tried it with my old magnet mount, it holds ok with a case on holding the metal back plate between the case and the phone. But doesn't hold firm enough for me to chance it with the phone. But then again it's some generic magnet mount, not a mountek.
I just ordered this yesterday after returning the standard CD mount that uses clamps. The clamps were interfering with the buttons way to much, and I didn't like how off centered the weight was when clamping the phone on the bottom portion of the phone. This is definitely a fail in button placement for this application. Hopefully the magnetic mount will be stellar!
Hi, i just bought it as well, i also ordered these. http://smile.amazon.com/gp/product/B007F0QRYG/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
If the magnet that comes with it can't bend or wont work well with the 6, maybe these little flexible magnets will work. I report back today when they arrive to see if they work well
the green man said:
Has anyone tried a magnetic car mount with their nexus 6? Specifically the Mountek nGroove Snap 3 - http://www.amazon.com/Mountek-nGroo...ablets/dp/B00MNXAFQ6/ref=cm_cr_pr_product_top
I used a magnetic mount with my Nexus 5 and loved it. I'm wondering how hard it would be to bend the magnet to work on the n6. Any input would be greatly appreciated!
Click to expand...
Click to collapse
That mount looks like a disaster.... I can't post links, but type into amazon "maggrip car mount" and get that one. It's a lot neater
Metal
Not that easy to apply, looks nice. Camera piece to fake for my liking. Feels good, little sharp on the bottom side of edges when holding.
Just tested nGroove 3 with the caseology TPU case and it worked great! Phone locked on and was very secure.
However, I like showing off the nexus logo on the back and don't know if I want to keep the caseology TPU case (using the spigen ultra hybrid currently)... Does anyone have any recommendations on how to place these magnets/plates and show off the nexus logo? I could probably use the Rinke max and put the magents on the both sides of the logo but the case may be too thick.
I was also thinking about sticking some magnets/plates behind the back cover.. does anyone know if there is a warranty seal for the back cover? I looked at the teardown but didn't see anything about the warranty seal.
OP - Just received this mount from Amazon yesterday, and I have to say it's worth it! I have a Nissan Titan and the CD slot is in the perfect spot for a mount like this I also like that the mount doesn't grip the side of the phone and press up against the buttons. I bought it from the Amazon warehouse for $15 and the unit I received looked new. You do have to tighten down the CD slot insert to endure the phone doesn't sag when you place it on the bracket, but once its tight, the phone holds steady and secure on the magnetic steel plate.
@born_fisherman what case are you using?
the green man said:
@born_fisherman what case are you using?
Click to expand...
Click to collapse
Tudia TPU slim case. The steel plate for the magnet fits nice behind the phone with the case on
born_fisherman said:
OP - Just received this mount from Amazon yesterday, and I have to say it's worth it! I have a Nissan Titan and the CD slot is in the perfect spot for a mount like this I also like that the mount doesn't grip the side of the phone and press up against the buttons. I bought it from the Amazon warehouse for $15 and the unit I received looked new. You do have to tighten down the CD slot insert to endure the phone doesn't sag when you place it on the bracket, but once its tight, the phone holds steady and secure on the magnetic steel plate.
Click to expand...
Click to collapse
born_fisherman said:
Tudia TPU slim case. The steel plate for the magnet fits nice behind the phone with the case on
Click to expand...
Click to collapse
How do you like the case? I'm thinking about picking one up.
the green man said:
How do you like the case? I'm thinking about picking one up.
Click to expand...
Click to collapse
The case is nice. I've used Tudia for a few phones now, and never have an issue with build quality. They fit perfect and keep the phone slim.
Pithism said:
Hi, i just bought it as well, i also ordered these. [new user - link removed :-/]
If the magnet that comes with it can't bend or wont work well with the 6, maybe these little flexible magnets will work. I report back today when they arrive to see if they work well
Click to expand...
Click to collapse
Very interested in seeing how this worked. Any updates?
Works great.
I put the large tablet size piece that came with the stand in a case and the magnet does have some flexibility to it so it fits well in the slight curve of a N6 case.
The connection is strong and holds up going through bumps etc.
Worth the buy
I assume that if your using a magnetic holder with a steel plate attached to your phone or case, that you are not using a Qi charger. Wouldn't the steel plate would heat up when using wireless charging? I had some problems with my N5 with overheating if my phone was not in the correct place on my Qi charger, the metal in the phone used to attach the N5 to the official nexus charger would get hot.
atcjeff said:
I assume that if your using a magnetic holder with a steel plate attached to your phone or case, that you are not using a Qi charger. Wouldn't the steel plate would heat up when using wireless charging? I had some problems with my N5 with overheating if my phone was not in the correct place on my Qi charger, the metal in the phone used to attach the N5 to the official nexus charger would get hot.
Click to expand...
Click to collapse
I've been trying various magnet mounts and qi chargers hoping to find the right combination of the two. Unfortunately, in order to avoid blocking the qi coil you end up moving the magnet mount further up the back of the phone almost near the bottom of the "M" dimple. Placing a strong magnet near that part of the phone will trigger the screen shutting off "smart cover" style (coming back on again as soon you remove the magnet). I'm beginning to suspect that in order to really get everything (qi, nfc, magnet mount, with the screen on) working together right might require building something a bit more customized.
I personally am also using the mountek snap 3 mount and I have had no issues after affixing the tablet sized metal plate about 2/3 of the way down, ive ordered some extra magnets to improve the hold on the device so i dont have to worry about precisely placing the device on the Mount
AWESOME mount, works with most TPU cases or on the outside of "thicker" cases; also Qi still works just fine.
If you'd like to see my other videos, consider subscribing by hitting the image below
Spam
Take your ads else where
SilentO said:
Spam
Take your ads else where
Click to expand...
Click to collapse
What ad sir? This is a legit product, I've done many reviews for other products. But thanks for your stupid comments
I ordered this product - it does interfere with Qi charging. There is no placement on the phone that the steel plate does not interfere with. It's a shame though as the mount is awesome and holds the phone well. But if you want Qi charging as well, this isn't the product you're looking for.
qwen3579 said:
I ordered this product - it does interfere with Qi charging. There is no placement on the phone that the steel plate does not interfere with. It's a shame though as the mount is awesome and holds the phone well. But if you want Qi charging as well, this isn't the product you're looking for.
Click to expand...
Click to collapse
Qi worked fine for me, it's not think enough to interfere. Qi is capable of charging few mm above the coil
WinDroidGuy said:
Qi worked fine for me, it's not think enough to interfere. Qi is capable of charging few mm above the coil
Click to expand...
Click to collapse
It does not work for me. I have this case http://www.spigen.com/brands/google/nexus-6/nexus-6-case-neo-hybrid.html and the plate inside. None of my Qi chargers will charge with the plate in place.
qwen3579 said:
It does not work for me. I have this case http://www.spigen.com/brands/google/nexus-6/nexus-6-case-neo-hybrid.html and the plate inside. None of my Qi chargers will charge with the plate in place.
Click to expand...
Click to collapse
did you stick the metal plate on the outside of your spigen? or did u just place it between your phone and the case like in the video? I'm considering this mount...but not sure i want to stick someone on the outside of the case permanently.
Thanks!
da_angelboy said:
did you stick the metal plate on the outside of your spigen? or did u just place it between your phone and the case like in the video? I'm considering this mount...but not sure i want to stick someone on the outside of the case permanently.
Thanks!
Click to expand...
Click to collapse
I tried both - same results.
qwen3579 said:
I tried both - same results.
Click to expand...
Click to collapse
Just knowing how Qi works, my gut instinct is to not slap a piece of metal in between the coils regardless of if it starts charging or not.