Hey Lads,
i'm about to get my GS2 this week and i'm asking myself if it is necessary to make a backup from the stock-firmware.
I had a galaxy s before and as soon as I got it I went flashing everything I could get my hands on without doing any backaup.
So my question is if I need to make a backup to get back to stock when I for example want to send it back for service or something like that.
Or does flashing a stock-rom, from the forums, have the same effect ?
Well I think this will have the same effect but I'm not 100% sure.
greets
How do you backup the stock firmware?
But I think you can always get the original firmware throug KIES if you don't change the CSC.
Good question... I don't know exactly but I do believe there is a way that uses ADB - something fromh the android develeopment tools.
But I dont know how this is exacly done. Maybe someone could post a link to a how-to ??
Question is ; am I able to do a official update when I actually have a custom rom installed...
Question is ; am I able to do a official update when I actually have a custom rom installed...
NO nor is the phone repaired under warranty .
http://forum.xda-developers.com/showthread.php?t=1032437&page=5
Post 46 and save an original firmware for your brand .
jje
Hey that is a very nice app. Thanks Bro.
@warranty
I know that there will be no repairs under warranty after flashing a non-stock firmware, thats the reason why I need a "clean" firmware to flash before sending it back.
wouldn't bother trying to back up the stock firmware as this can be re-flashed. just make sure you back up your efs folder!
Rumble
Hi All,
First off I apologize for my layman terms and my ignorance. I am a brand new Samsung Galaxy SII user. I have a plan with AT&T and mine is stock- My girlfriend is who has the problem, therefor I am asking for her.
She unlocked her Samsung Galaxy SII herself and is on an in-state cell provider. She has rooted her phone and encountered some problems... Calls not being heard, bottom touch buttons not working, etc. So currently we are working on getting it back to the stock i777 (it's on a 9100 and upgraded to 2.3.5) in hopes of returning it.
I downloaded Odin onto my computer in an attempt to help her. I downloaded the rooted system package because she wanted to keep her root, and I downloaded the Modem thingy to help with the calls not working. I thought I could just extract these and put them into Odin, but it's not doing anything :/ It recognizes them but starts to load up and then stays where it's at, and everything is the same.
I'm frustrated because Im a complete noob to all of this. I am used to iPhones and iPhone terms, and I am familiar with jailbreaking them. But things like Kernel, pit, modem, etc are all foreign words to me, so I am having trouble picking the right words to search for in the box.
Is there anyone that can lend a complete moron some help? I dont even know where to start. I'd love to get this fixed for my girl.
Flashing to i9100 ROMs are to the blame for all her issues. International versions are not compatible firmware and hardware wise with AT&T version. You will get button issue and call issues.
The problem you have is probably due to a newer boot loader being updated to the phone and it is refusing anything other than the i9100 ROMs.
foxbat121 said:
Flashing to i9100 ROMs are to the blame for all her issues. International versions are not compatible firmware and hardware wise with AT&T version. You will get button issue and call issues.
The problem you have is probably due to a newer boot loader being updated to the phone and it is refusing anything other than the i9100 ROMs.
Click to expand...
Click to collapse
Bootloaders don't do anything like that.
My suspicion is that it's some sort of driver problem. Beyond that, I don't know - I've never flashed from Windows before.
She shouldn't need to return her phone. Running an I9100 ROM and modem is known to cause ALL of the issues she's having.
Does her device have working Clockworkmod Recovery? If so, try flashing Cognition X2 from the development forums here. Make sure it's X2, not S2 - S2 is for the I9100. Cognition X2 is intended for our phone.
Thank you both for your replies so far! I am going to try the Cognition X2 and see how that works.
I had the same problem.
Use this as a guide fixed it:
Recovering an ATT Galaxy S2 after flashing GT-I9100 Firmware in the development section.
We got it fixed! Buttons work and so do the calls! Back on i777 too! Thanks!
Hi,I rooted my phone then I installed new ROM but then, I installed Galaxy S2 I9100 JB ROM Which was I9100XXLSJ ROM
when I have Galaxy S2 SGH-i777. I know I'm stupid I didn't read it clearly it just said Galaxy S2 Jellybean
I have factory reset it but it is still the i9100 JB ROM not my old AT&T version
I used Odin3 v1.85 to do all this. I have downloaded several ROMs to see if it worked but when I opened them up it dont work with Odin and they said something about installing with SD card and stuff. I tried and i cant find the program and such.
At this moment I I just want my phone to work again. It don't matter if I use stock version of ICS as long it works again with ATT. because right now. my Back/Search doesn't work and Calling.
Please help, and give good explanations because I'm not very strong in electronics
If your phone will still enter download mode you can still fix it. Look through the stickies(important threads which have been given special status due to their importance and relevance) there are several that explain how to return to stock firmware. You should probably flash a full version of stock including the bootloaders as what you flashed may have contained I9100 bootloaders. But better safe than sorry. I've given you enough information to get started, let us know how it turns out.
Phalanx7621 said:
If your phone will still enter download mode you can still fix it. Look through the stickies(important threads which have been given special status due to their importance and relevance) there are several that explain how to return to stock firmware. You should probably flash a full version of stock including the bootloaders as what you flashed may have contained I9100 bootloaders. But better safe than sorry. I've given you enough information to get started, let us know how it turns out.
Click to expand...
Click to collapse
Thank you! I'll get started as soon as possible and let you know how it goes.
Why did you start another thread for this same issue?
Closed
There are a lot of people joining xda on daily basis, and there are a lot of repetitive questions being asked which fill up Development threads. Point them here. Feel free to ask or answer questions. Idea of this thread is to get users to help other users with their problems/questions. Please do not spoon feed, but rather point in the direction where that user can find an answer and educate himself
I don't actually have the GS3 unfortunately, but in order to make XDA a better place, I thought I'd open up a help thread for those who need it. I won't be able to give S3 specific help, but I can help in terms of general questions. Hopefully some of the experienced S3 help out on this thread, because it'd make everything easier. Thanks!
First thing first. I strongly advise you to read THIS thread before posting ANYTHING on XDA.
Then, have a quick look at the names of threads in post no2, you might find what you need right away.
For ROM issues please do mention in your post about:
ROM name
ROM version and base
kernel version and its settings
any mods applied on top of it
flashing "style" aka dirty or clean
something like this
...and be sure you have asked before on the ROM thread unless you have less than 10 posts on XDA
Third. Even if you do get your question answered, please, do come back and read threads in post no2 (coming later as soon as we start getting the guides) to educate yourself. You'll be surprised how much time and frustration it will save you in the future.
ASK ANY QUESTION HERE,adb, drivers, superCID etc...... You will either get an answer or will get pointed in the right direction.
No abuse towards noobs tolerated here! No question is stupid in this thread.
***I feel that a little OT is healthy to the success of this type of thread. The people here who help the most will develop a comradery therefore OT is allowed within reason. Common sense will be applied ***
HALL OF FAME
People who contributed most to this thread and helped countless number of people with their problems/questions. In no particular order.
Currently none. Hopefully soon.
Big thanks to Undercover and Xanthrax for this thread model
Reserved
Good job!
Stuck
Hey guys, i'm sort of a noob on these forums so any help would be great!
I've had previous experience with rooting because of my S2, no problems at all. I got my s3 about a month ago and I've been trying to figure out how to root it. It's a GT-I9300T ( Australian model ). It has a lot of Vodafone bloatware, however it's unlocked as i'm using an Optus sim card. I've also read that there aren't many differences between the international model and the T model, so any international ROM should work fine. It's running 4.3. I've read about how KNOX is built into 4.3 and makes rooting difficult by blocking the installation of custom Roms and disabling superSu. I'm not sure if i have Knox though, because i don't have a KNOX app installed; there are no KNOX related apps installed on my phone ( according to the all section of my applications manager ) and it says nothing about the KNOX counter in download mode. Is KNOX still present on my phone, and will i be able to install customs roms?
Also, what would be the best method of rooting? I have tried the saferoot method by Mrw0lf on YouTube, which is made not to trigger Knox. I've read about CF root and other methods involving Odin, have not tried any yet because i'm scared of bricking my phone. Any help or link would be helpful. Also, if something goes wrong; would i be able to flash a stock 4.3 ROM onto my phone using Odin? I'm downloading it now from sammobile and i was wondering if flashing anything through Odin would cause problems.
Lastly, is there a way to backup my EFs before rooting? I can't find them through the default file explorer and the folder is empty in 3rd party ones. I can't seem to find them when i go through my phone on my computer, i just want a backup before i try to root.
Anyway, vital phone info:
Model: GT-I9300T
Version: 4.3
Sorry for the long post, but any help would be cool. Also, i'm not that good with all the technical things behind rooting such as CSCs, basebands and such, so any simple explanation would be nice
Thank you! :fingers-crossed:
Good morning
Dont worry about knox
There no knox for S3 now matter what variant
Now secondly.
U can flash everything from i9300 on your i9300t however its advisable that when u flash roms that u maintain or re-flash afterwards the appropriate modem
As the only difference between models is the band frequency
To root it ... For myself the easyest way is ...
Grab philz recovery
Flash it with Odin
Afterward boot into recovery
Go to advanced and choose re-root system
Then just boot the ROM go to market and download supersu you're good to go
About backup efs there's a loooooot of apps to do so u just need the pick the one who's flavour suit u best
Take care
If u have doubts just pm me
Enviado do meu GT-I9300 através de Tapatalk
---------- Post added at 11:23 AM ---------- Previous post was at 11:23 AM ----------
PS: u can only backup your efs after u root your device
Enviado do meu GT-I9300 através de Tapatalk
SnowPluralism said:
Good morning
Dont worry about knox
There no knox for S3 now matter what variant
Now secondly.
U can flash everything from i9300 on your i9300t however its advisable that when u flash roms that u maintain or re-flash afterwards the appropriate modem
As the only difference between models is the band frequency
To root it ... For myself the easyest way is ...
Grab philz recovery
Flash it with Odin
Afterward boot into recovery
Go to advanced and choose re-root system
Then just boot the ROM go to market and download supersu you're good to go
About backup efs there's a loooooot of apps to do so u just need the pick the one who's flavour suit u best
Take care
If u have doubts just pm me
Enviado do meu GT-I9300 através de Tapatalk
---------- Post added at 11:23 AM ---------- Previous post was at 11:23 AM ----------
PS: u can only backup your efs after u root your device
Enviado do meu GT-I9300 através de Tapatalk
Click to expand...
Click to collapse
Thanks for the reply!
I just rooted my phone using Cf auto root. I forgot the warranty was expired so why not It ended up working, now running CyanogenMod 11 nightly About the modem, the reception seems the same. The signal i got before I rooted wasn't that great, haha. But i'll probably flash the modem anyway, just in case. I found a thread with most of the modems for the s3 here:
http://forum.xda-developers.com/galaxy-s3/general/ref-galaxy-s3-modem-radio-collection-t1740061
All the modems are for jellybean, however the ROM i'm on ( CyanogenMod 11 ) is on kitkat. Can i flash any of those modems? For the T model, they say there's no regional or carrier specific one, even though i checked my modem on sammobile and it's not listed in the thread. The latest one is for 4.1.2, i'm on 4.4.2. Should i flash it? Also, can you flash it in CWM, or does it have to be through Odin?
Edit: Seeing as you're a fellow S3 user, have you experienced any lag or freezing with your phone? It happened quite a lot pre root, but i just thought it was due to the bloatware. And Touchwiz, haha. But it's happening with CyanogenMod 11 as well. I know that it's a nightly and that bugs are to be expected however i have an S2 running CyanogenMod 11 as well, and there's nowhere near as much lag. Any ideas? I reset the phone and re installed the ROM twice, mainly because i forgot to flash Gapps XD Any ideas? Should i do a full factory reset, free up some space? I know that there's 2gb left on both the phone and my SD card.
Anyway, thanks for all of your help so far!
DoctahG23 said:
Thanks for the reply!
I just rooted my phone using Cf auto root. I forgot the warranty was expired so why not It ended up working, now running CyanogenMod 11 nightly About the modem, the reception seems the same. The signal i got before I rooted wasn't that great, haha. But i'll probably flash the modem anyway, just in case. I found a thread with most of the modems for the s3 here:
http://forum.xda-developers.com/galaxy-s3/general/ref-galaxy-s3-modem-radio-collection-t1740061
All the modems are for jellybean, however the ROM i'm on ( CyanogenMod 11 ) is on kitkat. Can i flash any of those modems? For the T model, they say there's no regional or carrier specific one, even though i checked my modem on sammobile and it's not listed in the thread. The latest one is for 4.1.2, i'm on 4.4.2. Should i flash it? Also, can you flash it in CWM, or does it have to be through Odin?
Edit: Seeing as you're a fellow S3 user, have you experienced any lag or freezing with your phone? It happened quite a lot pre root, but i just thought it was due to the bloatware. And Touchwiz, haha. But it's happening with CyanogenMod 11 as well. I know that it's a nightly and that bugs are to be expected however i have an S2 running CyanogenMod 11 as well, and there's nowhere near as much lag. Any ideas? I reset the phone and re installed the ROM twice, mainly because i forgot to flash Gapps XD Any ideas? Should i do a full factory reset, free up some space? I know that there's 2gb left on both the phone and my SD card.
Anyway, thanks for all of your help so far!
Click to expand...
Click to collapse
If u flashed cm u have retained same modem so no need to update modem
Just leave it be.
About lag no my phone runs just good no matter what aosp or recent stock rom
Check your kernel config or go for a custom one a and set him up to what suits u best.
I use agni kernel on cm alongside with a optimised profile
And even with a UV of CPU and GPU my phone runs real smooth and saves juice
Enviado do meu GT-I9300 através de Tapatalk
ive got experience with flashing custom roms and know how to do it but im quite paranoid which is why i have this question. Im currently running foxhound 2.4 on S# GT-i9300 with siyah kernel and i want to flash slimkat 4.4.2 build 3. i was just wondering if siyah kernel will get in the way of the flashing. Will i need to flash stock kernel then flash slimkat/gapps or does slimkat have install its own kernel in which case i guess i should just flash normally.
Device: galaxy s3 i9300
ROM name: Foxhound
ROM version and base: 2.4
Build number: jzo54k.i9300xxemb5
kernel version and its settings: 3.0.31-siyah-1.8.9+
Khanster97 said:
ive got experience with flashing custom roms and know how to do it but im quite paranoid which is why i have this question. Im currently running foxhound 2.4 on S# GT-i9300 with siyah kernel and i want to flash slimkat 4.4.2 build 3. i was just wondering if siyah kernel will get in the way of the flashing. Will i need to flash stock kernel then flash slimkat/gapps or does slimkat have install its own kernel in which case i guess i should just flash normally.
Device: galaxy s3 i9300
ROM name: Foxhound
ROM version and base: 2.4
Build number: jzo54k.i9300xxemb5
kernel version and its settings: 3.0.31-siyah-1.8.9+
Click to expand...
Click to collapse
I think you should probably full wipe before flashing another rom. Then you should be good to go to flash slimkat and gapps.
Sent from my Nexus 4 using Tapatalk
and youll need to change kernel.
Syah Eol on 4.1.2
Enviado do meu GT-I9300 através de Tapatalk
SD Issues ? backwards "u"
My Wife is on her 2nd SD card with the same issues. I copy all of her pics and some videos from her move them to the Sd card. When going into my files it says there is 500+gbs on it! The file path extsdcard/Android has 467 gbs and 471 folders. Then there is a data folder but the D in data is a backwards u then ata. This folder says it is 467gbs with all folders named with crazy looking characters. I did try and search forums but could not find where to post and didn't want to get yelled at by the "Geniuses" on here for posting in the wrong place or not searching well enough. So if u could please get me to the right place it would be much appreciated. All the files are pics and vids of kids and thankfully we have auto backup in with google otherwise it seems we would lose all photos and vids. Thanks. Please see attached pics for reference
S3 4.0.4 stock rom
I had installed android 4.3 on s3 but then I installed 4.0.4 after that I had no gsm connectivity see the block sign between battery and wifi. I have gsm connectivity on 4.3 but not on 4.0.4. A guy told me that it has something to do with the bootloader. I wish to install 4.0.4 stock ICS BTU rom if there's a way do tell me. Thanks in anticipation!
i am using GlamourS4 5.0 rom and googy max2 kernel
the first problem i have is when i pressed the emergency call button on the lockscreen,
it did show anything such as the keyboard and the signal will stop a few seconds and come back.
second, i found the nfc not working anymore in my phone.
the nfc and s beam tag are greyed when i try to turn them on.
can anyone can solve my problems?
Anyone for my weird Network problem...?
I recently rooted my S3 via the CF Root method. Flashed CWM Recovery 6.0.4.4 via Odin.
That's it.
And now this weird problem-
My network is lost anytime! And the phone even doesn't say "Not registered on network" or something like that!
My phone was working properly and suddenly a friend of mine messaged me that he tried calling me but it said that my phone was switched off! I also noticed that at time even the data connection was not working. NO! It's not that it didn't show it isn't connected to the network or the data is disabled! The signal in the status bar was of 4 bars as it is and there was this symbol of 3G beside it. I tried calling my friend but the call got cancelled! I redialed, I didn't hear anything and then again the vibration saying the call was cancelled! I called up on my S3 through my landline number which also said that it was switched off -but not immediately. Whenever someone called me, they didn't hear anything for a long time of a minute or two and THEN it said that my mobile was switched off. I tried selecting my network operator manually, it said 'Registered on Network' but still I couldn't receive or make calls or use my internet data. But I could always send or receive SMSs!! It means it was connected to my network. The only solution was to reboot the phone after which it worked fine for a few hours. FOR FEW HOURS ONLY!
Now it happens at least 2-3 times per day and it has been important for me to check whether the data connection actually working and I'm able to access the internet or not because that's the only way to find whether someone can call me or not!
How do I fix this? I'm having my exams now and I don't have time to setup my phone again by changing ROMs!
Please tell me a way to fix this without changing my ROM!
I'm on Android 4.3 Stock ROM.
Unable to download Add on on Triangle Away V 3.26 even i do have Internet
Does anyone experience this message on Triangle Away V 3.26. "A fatal error occured while downloading the package. Please make sure you have a connection to the internet and try again later." ("I do have Internet Connection")
Google search question
Hello everyone.
I have noticed a strange behaviour of Google search after flashing SlimKat 3.9 and 3.10. Settings for search applications and contacts on the phone are gone. Is it a new update from Google or a bug? Fresh install didn't help. Screenshot attached.
Device: Galaxy S3 GT-I9300
ROM name: SlimKat
ROM version and base: 3.10 weekly
Kernel: Boeffla-Kernel Omni 2.2-rc1
Google search version: 3.3.11.1069658.arm
galaxy s3 specification
Hi im buying a galaxy s3 from a site that im pretty sure is reliable but before i buy i want to know if what he wrote is correct
the Module is :I9300
he says that the Gpu is: Mali-400MP
and i saw in some forums that its supposed to be Mali-400MP4?
can you please tell me which one is suppose to be in Galaxy s3
Thank you
isragal said:
can you please tell me which one is suppose to be in Galaxy s3
Click to expand...
Click to collapse
Gpu for I9300 is ARM Mali 400 MP, as far as I know.
abubakarsohail said:
I had installed android 4.3 on s3 but then I installed 4.0.4 after that I had no gsm connectivity see the block sign between battery and wifi. I have gsm connectivity on 4.3 but not on 4.0.4. A guy told me that it has something to do with the bootloader. I wish to install 4.0.4 stock ICS BTU rom if there's a way do tell me. Thanks in anticipation!
Click to expand...
Click to collapse
Could be to do with the EFS partition. 4.3 uses a different version and apparently problems can occur when trying to revert to an earlier version. As far as I have read elsewhere, the problem can be verified by checking the IMEI number in settings - if it is all zeros it has been corrupted and will cause what you describe. I'm afraid I don't have a solution but hopefully this info might help you move a bit closer to one.
Another SlimKat question. According to battery stats, it seems that my wi-fi is always on. I've used 3g only since last charge and wi-fi is off in settings. Can it be helped somehow? Screenshot attached.
Device: Galaxy S3 GT-I9300
ROM name: SlimKat
ROM version and base: 3.10 weekly
Kernel: Boeffla-Kernel Omni 2.2-rc1
Look my device (Samsung Galaxy S3 GT i9300) has a problem in the GSM system to attempting a connection appears the message "Not Registered to Network", I literally everything you can imagine in this world (absolutely everything), I started trying:
- Use the new version of Busybox and the old version along with Ariza Patch
- Installing the Kernel Stock along with the modified solution of this problem that would Modem.
- Performing the reset of the EFS folder.
- Making Factory Reset
- Installing Stock ROM through Odin
- I used the firmware 21.1.14 (the latest version) of the Brazilian operator TIM is the ZTM (I've used the international Firmware too)
- I performed the process of downgrading the ROM for 4.2 and 4.1
- Have you installed all possible ROMs, Modems possible, possible Kernels.
- And finally, that's as far as changing the SIM Operator as trying to configure the automatic or manual Networks...
(Note: during my use of the apparatus I never did any of EFS Backup folder, know very well the risks they take responsibility to not opt for backing up, and that was the price I paid for not having done the backup, but I'm looking for a solution to solve this by removing the option to restore the EFS folder, since I did not perchance Backup it) - and remembering that I live in Brazil.
So the question is: Is there a solution for this? Or you must take your unit in technical assistance for them to do the repair via Box?
Take to 'technical assistance' for them to repair. Make sure it works on firmware 4.3 before you pay them.
boomboomer said:
Take to 'technical assistance' for them to repair. Make sure it works on firmware 4.3 before you pay them.
Click to expand...
Click to collapse
Got it from the beginning I already knew that the only solution was to bring in a same technical assistance, but thought I had another solution now is to see how they will charge for the service in relation to firmware believe that it does not interfere much, since I bought the machine in the store in August of 2013 and at that time was the official launch of version 4.1 and version 4.3 only came in April 2014 (at least the Brazilian version, since the UK version was not very well regarded here) but anyway, thank you friend! :good:
Did you read the today's post here about wrong CSC?
S3 FAQs need updating
Thanks rp158!
We REALLY need to get the FAQs updated with my info on CSCs etc. I can only presume no admins have read my postings yet.
http://forum.xda-developers.com/galaxy-s3/help/suggestions-s3-faq-t2902962
pfmdan said:
Thanks rp158!
We REALLY need to get the FAQs updated with my info on CSCs etc. I can only presume no admins have read my postings yet.
http://forum.xda-developers.com/galaxy-s3/help/suggestions-s3-faq-t2902962
Click to expand...
Click to collapse
Go to faq thread, pm OP to edit, report post to mods giving them the reason and info.
If either of them agree to the changes it will be done bu please stop hijacking others post, also asking the mods or admin to do something in a normal post tons of time will not get it done. They do not read the posts and there are alot of other sections for them to monitor and only a few of them. That's what the report button is for