Related
can anyone post cwm or twrp for samsung sm g316hu model ???
or any rooting method for sm g316hu ...i have tried everything i root, vroot, srsroot, root genius...didnt work...
please help....
ashwini212199 said:
can anyone post cwm or twrp for samsung sm g316hu model ???
or any rooting method for sm g316hu ...i have tried everything i root, vroot, srsroot, root genius...didnt work...
please help....
Click to expand...
Click to collapse
me too
nothing works ....
---------- Post added at 08:46 PM ---------- Previous post was at 08:42 PM ----------
if u find someting ,,,, plz post it
Hii guys .. try use 360root.apk
Solution
ashwini212199 said:
can anyone post cwm or twrp for samsung sm g316hu model ???
or any rooting method for sm g316hu ...i have tried everything i root, vroot, srsroot, root genius...didnt work...
please help....
Click to expand...
Click to collapse
Use "360 Root" mobile app version. Tested on Samsung Galaxy Ace 4 Lite SM-G313H. :good: :good: :good:
It's a chinese app, but it will do the trick as the only rooting method for this phone (Kitkat 4.4.2) beside Z3X Box !
You can root and flash twrp
Hello guys i'm also owning a samsung ace 4 (SM-G316HU)
I have found a solution for rooting and flashing twrp recovery in your phone
1ST STEP:-
download kingoroot app for android for that just type kingoroot in google
enable usb debugging and developer option
open kingo app and click root.
thats it you hav rooted your mobile
2nd step:-
FLASHING CWM AND THEN TWRP
i recommend TWRP for ace 4 but unfortunately you cannot flash zip file without custom recovery
download odin in pc
download cwm recovery for odin from the link given below.
http://forum.xda-developers.com/ace-4/development/recovery-cwm-v6-0-3-7-samsung-galaxyace-t3243127
put the recovery.tar in AP tab in odin
enable usb debugging and put your phone in recovery mode.
when u see the added! message in odin click start
your device will automatically reboot
plug out your battery and start in recovery mode you will see cwm installed.
FOR TWRP(STEP 3):-
download twrp from the given link
http://forum.xda-developers.com/ace-4/development/twrp-t3257076/post66574468#post66574468
now paste the zip file in sd card
go to cwm recovery
choose install zip
locate the file and flash
now reboot your phone you have sucessfully rooted and flashed twrp recovery
NOTE: IF YOU DONE ANYTHING WRONG AND MESSED UP YOUR DEVICE AND POINT FINGER AT ME.I WILL LAUGHT AT YOU.
enjoy :laugh::laugh::laugh::laugh::laugh::laugh::laugh:
No more long method for rooting sm-g316hu
Just try new kingroot app
NOW it can root sm-g316hu
You have to use kingroot...
Please help me I want to install custom recovery on my karbonn titanium MACHFIVE.
This phone running on lollipop 5.0. & it have MediaTek MT6582 1.3 GHz Quad-core processor
&2GB of RAM & 16GB internal memory.
have you rooted your fone
need root
i know machfive is new in the market but really need at least rooting method for it cause it have some bugs though pls pls pls developers we are relaying on you for this
Yes
farhanfarhan32 said:
have you rooted your fone
Click to expand...
Click to collapse
I have rooted phone.
I root with kingroot
mukulkumars13 said:
I have rooted phone.
I root with kingroot
Click to expand...
Click to collapse
kingo root does not worked for me
Use iroot it worked for me
Need recovery for it man..... Xposed is also need to flash zip n i dont hav recovery damn!!
ajju akm said:
Use iroot it worked for me
Click to expand...
Click to collapse
kingo root , iroot , towel root, every thing failed:crying::crying:
I just rooted with iroot windows application.
ashish128 said:
I just rooted with iroot windows application.
Click to expand...
Click to collapse
which version of iroot you used?
root with kingroot
i used kingroot ver. 4.0.0 and it works try it out
after root u can use http://forum.xda-developers.com/showthread.php?t=2379412 to make recovery for ur machfive as it is a mediatek device
hit thanks if i helped
ajju akm said:
i used kingroot ver. 4.0.0 and it works try it out
after root u can use http://forum.xda-developers.com/showthread.php?t=2379412 to make recovery for ur machfive as it is a mediatek device
hit thanks if i helped
Click to expand...
Click to collapse
king root 4.0 worked:laugh:
farhanfarhan32 said:
king root 4.0 worked:laugh:
Click to expand...
Click to collapse
Hi
Just bought this phone for my friend. While trying to root with kingroot v4 and 4.5 its does not works.. Can u tell me ur frmware version number ?
Is there any recovery for this phone Karbonn Titanium Machfive.
Thanks in advance.
Sent from my MACHFIVE using Tapatalk
phone stuck in boot loop after kingroot 4.5. what to do?
model karbonn mach five.
Ya my phone too struck in karnonn logo after updating su binary...
Please anyone provide the factory image of karbonn titanium mach five ASAP..
And also provide instructions for flashing the image
Device: Karbonn Titanium Mach Five
Status: Rooted, No custum recovery installed, Bootloop...
Kingroot 4.0 worked. Rooted successfully
Sent from my MACHFIVE using Tapatalk
Recover KARBONN TITANIUM MACHFIVE
rockybilla007 said:
Ya my phone too struck in karnonn logo after updating su binary...
Please anyone provide the factory image of karbonn titanium mach five ASAP..
And also provide instructions for flashing the image
Device: Karbonn Titanium Mach Five
Status: Rooted, No custum recovery installed, Bootloop...
Click to expand...
Click to collapse
The last week I had a similar issue stuck on KARBONN logo.
I used Stock from XDA Firmware xdafirmware.com/karbonn-mach-five
Download the necessary drivers (a must) .
The downloaded compressed file will have SP flash tool with it .
1 .Open "flash_tool.exe" under "\SP Flash Tool v5.1516" folder (with admin privileges) .
2 .Navigate to the "Download" section .
3. Click on the "Scatter-loading". Browse "MT6582_Android_scatter.txt" under "Firmware" .
4. Now this will give you a list of files to flash that comes from the "\Firmware" folder . Make sure every files load correctly to the list(location can be seen to the right of the item to be flashed) . Especially "Android" which correspond to the system.img file in the \Firmware which I think which actually solves the android system related files' problems.
5. Now Power off your phone .
'''Wait for a sec ( many people advice removing the battery for a while).
6. Now click on the Download sign in the SP flash tool window . Connect your phone with the USB cable immediately and click on the volume up or down for SP flash tool to detect your phone. If the phone gets detected SP flash tool throws some info on the left pane. Then the files will start flashing . Flashing status is provided by a yellow bar at the bottom of the window.
7. After the flash is complete a green ok popup.
8. Boot your phone to recovery and Wipe the cache partition.
9. Restart the phone.
This worked with my MACHFIVE . Wishing you luck :good:.
*Flashing always have a risk of bricking your phone. Think twice before you act . I will not take responsibility.
*Always take any errors in SP flash tool seriously and consult expert advice before continuing
*Even if you are stuck on boot if you have enabled USB debugging you can use adb pull to pull your data from memory.
greentoy said:
The last week I had a similar issue stuck on KARBONN logo.
I used Stock from XDA Firmware xdafirmware.com/karbonn-mach-five
Download the necessary drivers (a must) .
The downloaded compressed file will have SP flash tool with it .
1 .Open "flash_tool.exe" under "\SP Flash Tool v5.1516" folder (with admin privileges) .
2 .Navigate to the "Download" section .
3. Click on the "Scatter-loading". Browse "MT6582_Android_scatter.txt" under "Firmware" .
4. Now this will give you a list of files to flash that comes from the "\Firmware" folder . Make sure every files load correctly to the list(location can be seen to the right of the item to be flashed) . Especially "Android" which correspond to the system.img file in the \Firmware which I think which actually solves the android system related files' problems.
5. Now Power off your phone .
'''Wait for a sec ( many people advice removing the battery for a while).
6. Now click on the Download sign in the SP flash tool window . Connect your phone with the USB cable immediately and click on the volume up or down for SP flash tool to detect your phone. If the phone gets detected SP flash tool throws some info on the left pane. Then the files will start flashing . Flashing status is provided by a yellow bar at the bottom of the window.
7. After the flash is complete a green ok popup.
8. Boot your phone to recovery and Wipe the cache partition.
9. Restart the phone.
This worked with my MACHFIVE . Wishing you luck :good:.
*Flashing always have a risk of bricking your phone. Think twice before you act . I will not take responsibility.
*Always take any errors in SP flash tool seriously and consult expert advice before continuing
*Even if you are stuck on boot if you have enabled USB debugging you can use adb pull to pull your data from memory.
Click to expand...
Click to collapse
Sir thank you so much for replying have been waiting for weeks for the solution..
1)Downloaded the files
2)Installed drivers
3)Started flash tool and loaded scatter file
4)Clicked on download
5)Powered off phone and connected via usb
6)Flashing process started
7)Flashing finished and green ring appeared!!!
8)Device booted after some time.
Thanks again for the solution :good::good::good:
Thanks for the guide.
Did anyone made custom recovery for this phone yet. If anyone has a recovery kindly share here.
Sent from my MACHFIVE using Tapatalk
hi guys,
can you please help with rooting micromax canvas juice 3 q392. it runs on lollipop 5.1.
thanks,
vikas
which chipset your phone using?
have tried onclick root like kingroot,kingoroot,root genius,vroot,iroot,..etc
Phone Specs : http://www.gsmarena.com/micromax_canvas_juice_3_q392-7663.php
chipset : MT6580
http://www.gsmarena.com/micromax_canvas_juice_3_q392-7663.php
---------- Post added at 21:50 ---------- Previous post was at 21:47 ----------
And for Root try to google or xda search ...
http://pidapso.com/how-to-root-micromax-canvas-juice-3-q392-on-android-4-4-4-4-4/
if they failed,there is a way but it is little bit harder.....
need to edit some files and compile them manually....
to port TWRP
http://forum.xda-developers.com/showthread.php?p=32965365
arshad145 said:
http://forum.xda-developers.com/showthread.php?p=32965365
Click to expand...
Click to collapse
thank you for this detailed one:good:
Try to root with
1. Kingo Root ( Kingoroot Android )
2. Kingo Root for windows ( Kingo Root Windows )
1. Procedure :
1.) Download and install Kingo root apk from the link provided.
2.) Simply click on "one click root"
3.) Rooting will start and If rooted successfully then device will restart.
IF this not works for you then follow the next.
2.Procedure :
1.)Download Kingo root for windows from link provided.
2.)Install on PC.
3.)Start the application
4.)Connect your device with USB and click on "ROOT" on pc.
5.)It will start rooting your device.
6.)Rooting will take few minutes.
7.)IF rooted successfully device will restart.
Done!!
IF first one not works then try second one.
Second one mostly works.
Ask if stuck in any problem.
And Give " Thanks "if this works for you.
Good luck!
him.singh17 said:
Try to root with
1. Kingo Root
2. Kingo Root for windows
1. Procedure :
1.) Download and install Kingo root apk from the link provided.
2.) Simply click on "one click root"
3.) Rooting will start and If rooted successfully then device will restart.
IF this not works for you then follow the next.
2.Procedure :
1.)Download Kingo root for windows from link provided.
2.)Install on PC.
3.)Start the application
4.)Connect your device with USB and click on "ROOT" on pc.
5.)It will start rooting your device.
6.)Rooting will take few minutes.
7.)IF rooted successfully device will restart.
Done!!
IF first one not works then try second one.
Second one mostly works.
Ask if stuck in any problem.
And Give " Thanks "if this works for you.
Good luck!
Click to expand...
Click to collapse
Hi him.singh,
I tried both of the above and sadly it didn't work.
However I was finally able to root my device with kingroot successfully.
I do have a query though: a.) how do i disable "root safe protector " in kingroot.
b.) can i replace the kingroot (v 4.8.0) with superSu?
Thanks to all who took time to respond.
Regards,
Vikas
vikas_1983 said:
Hi him.singh,
I tried both of the above and sadly it didn't work.
However I was finally able to root my device with kingroot successfully.
I do have a query though: a.) how do i disable "root safe protector " in kingroot.
b.) can i replace the kingroot (v 4.8.0) with superSu?
Thanks to all who took time to respond.
Regards,
Vikas
Click to expand...
Click to collapse
Hello vikas_1983 ,
I apologise for this.
I forgot to mention Kingroot App.
And Congrats !! you rooted your mobile.
Now coming to your question...
--I dont understand your first question !!!!
-- Replacing Kingroot with superSu.
replacing is simple
++ Method ++
1) Download SuperSu me (Download)
2) Install and open app,
3) Click on "Blue android button" ,
4) It will start replacing Kingroot with SuperSu.
4) Now , Process finished , SuperSu starts automatically .
5) Now you can check "root" status by using Root Checker app
6) After this process if there is any kingroot icon in mobile then you can remove that manually.
This is simple
I hope it will work for you :good:
""Please Ask your first question in detail""
If got stuck anywhere .....feel free to contact me.
And Give " **Thanks** "if this works for you.
Good luck!
vikas_1983 said:
hi guys,
can you please help with rooting micromax canvas juice 3 q392. it runs on lollipop 5.1.
thanks,
vikas
Click to expand...
Click to collapse
kingroot now supports rooting micromax canvas juice 3 Q392
please visit kingroot.net
vikas_1983 said:
Hi him.singh,
I tried both of the above and sadly it didn't work.
However I was finally able to root my device with kingroot successfully.
I do have a query though: a.) how do i disable "root safe protector " in kingroot.
b.) can i replace the kingroot (v 4.8.0) with superSu?
Thanks to all who took time to respond.
Regards,
Vikas
Click to expand...
Click to collapse
kingroot apk or kingroot exe which aps helped you to root??
Hey Kesupat
You can use both..
As vikash is saying Kingroot worked for him..
Then both exe and apk will work..
Becauce scripts used to root are same whether you are rooting via PC or using Apk.
If Kingroot Rooted Micromax Q392 then King root have working script for that device.
So you can try both....
First try to root using APK.
If it not works then try to root using windows pc.
Hit "Thanks" if answer helped you..
Vikas how u rooted your mm canvas juice 3 q392 i also want to root my device please help me.
---------- Post added at 05:42 AM ---------- Previous post was at 05:28 AM ----------
Thnxx a lot xda friends i have rooted my mm canvas juice 3 q392 successfully by Kingroot thnxx taht firend who who suggested for trying kingrott latest version .... big big thankss.
substituting kingroot by supersu
is there any bootloop risk in substituting kingroot by supersu??
kesupat said:
is there any bootloop risk in substituting kingroot by supersu??
Click to expand...
Click to collapse
I don't think there is any risk..
To replace Kingroot with super su Follow (Click Here And follow the instructions to replace )
If got stuck anywhere .....feel free to contact me.
And Give " **Thanks** "if this works for you.
Good luck!
how to backup mmx q392 stock rom..........???
How to backup stock rom
kesupat said:
how to backup mmx q392 stock rom..........???
Click to expand...
Click to collapse
you need to be rooted
install terminal emulator
install root explorer
using root explorer go to the root of the phone ,then browse to dev folder----> block ----> platform -----> within platform try to browse different folders to find a folder named "by-name" . open it to find the address to one of its contents in the properties section . the address should be like
dev/block/platform/xxxxx/by-name; (xxxxx is replaced by one that ur device has )
now open terminal emulator and type
su
grant superuser access to terminal emulator , if prompted n then type
ls -al /dev/block/platform/xxxxx/by-name (xxxxx is replaced by one that ur device has)
u will get a list with elements like...
lrwxrwxrwx root root 2014-01-02 07:22 boot -> /dev/block/mmcblk0p33 (where address of block boot i.e "mmcblk0p33" is replaced by one unique for ur device )
try and find this "block info" for boot , system , recovery , copy to keep the list somewhere .
now in terminal emulator type
dd if=/dev/block/mmcblk0p33 of=/sdcard/boot.img (to backup boot image for your device to sd card ; replace "mmcblk0p33" with the "block info" address found in the above step )
repeat the same step for system and recovery to get system.img and recovery.img respectively
Now you have the backup of your system , recovery and boot partition that you can modify or flash from fastboot later if required !!
P.S. BE PAITIENT FOR system.img backup as it takes SOME time to back it up
after substituting of kingroot by su mobile do not start.......only canvas logo is showing???plz help.........
kesupat said:
after substituting of kingroot by su mobile do not start.......only canvas logo is showing???plz help.........
Click to expand...
Click to collapse
What Happened actually?
When it stuck in bootloop , while replacing ?
Do you have a complete backup of your phone?
And I am Sorry for that happened with you but this worked for me fine....
him.singh17 said:
What Happened actually?
When it stuck in bootloop , while replacing ?
Do you have a complete backup of your phone?
And I am Sorry for that happened with you but this worked for me fine....
Click to expand...
Click to collapse
its started after some time............please help me how to backup my phone ???& how to rocover stock rom...??
How To Root And install Custom Recovery { I already used many one click root softwares like kingroot,iroot, framaroot and etc } Plz Help Me
There is no way to root micromax e455 until now
Sent from my Micromax E455 using XDA Free mobile app
I have rooted micromax e455 (Nitro 4G) through kingroot, but i was not able to go to recovery mode, used sp flash tool, now working fine
emhashmi said:
How To Root And install Custom Recovery { I already used many one click root softwares like kingroot,iroot, framaroot and etc } Plz Help Me
Click to expand...
Click to collapse
Though i am not an expert android developer but i have found a way to root this phone. I have not yet been able to find custom recovery (TWRP or CWM) for this phone yet.
Anyways the procedure of rooting is given below. I have tested this on my own phone but cannot guarantee that it will work on your phone also. Use it at your own risk and do not blame me if you make your phone a brick or paper weight!
1. Download Mi4i Toolkit from here:
http://forum.xda-developers.com/mi-4i/development/tool-mi-toolkit-v4-root-twrp-stock-t3170607
2. Enable Developer Options in the phone (Go to Settings and press version 7 times in "About Phone") and then in Developer Options will appear under setting.
3. In developer options enable USB debugging.
3. Extract the toolkit ZIP wherever you like, but keeping all files in same folder.
4. Download and install drivers from micromax website.
5. Connect your phone to the PC.
6. Run the Start.bat file and select option no.1. The phone will automatically reboot and you will find superuser.apk in app drawer.
Warning>>>> Do not select option no.2 (Custom reovery....) or 5 (Stock recovery......) as the same will brick this device.
These posted by sandss. I don't know it work for you or not
Can you pleases compile twrp gor this mobiles
Hi all!! recently I had been searching a lot for support on my device Micromax P681 Tab.
I tried googling around as well as on xda but no result found or something totally not related to my device.
For rooting my tab - I attempted Kingroot, Kingoroot, towelroot, one click root & meshuproot tool (both PC software as well as mobile software) but nothing work. Under developer option I have enable OEM unlock from setting as well fastboot oem bootloader unlock and retried above mentioned root tools but all failed to root my device.
Please someone help me in rooting my tab
charlessxavier said:
Hi all!! recently I had been searching a lot for support on my device Micromax P681 Tab.
I tried googling around as well as on xda but no result found or something totally not related to my device.
For rooting my tab - I attempted Kingroot, Kingoroot, towelroot, one click root & meshuproot tool (both PC software as well as mobile software) but nothing work. Under developer option I have enable OEM unlock from setting as well fastboot oem bootloader unlock and retried above mentioned root tools but all failed to root my device.
Please someone help me in rooting my tab
Click to expand...
Click to collapse
I downloaded a app to look at the stuff you can't see it's only rooted in one application and the reason we have no control is Android manager operating system is the admistrator.Not me not att and I can't do anything about it.
Sent from my 9020A using Tapatalk
Yes, Charles I downloaded a app in Google play store. Some one recommended it.I checked the whole tablet system out.Said my cellular is disconnected, don't know why only thing I can figure is I now have Comcast internet not U-verse &, tablet is a ATT 9020ATrek.It connects to WiFi but drops. I used cellular data yesterday because I can't access ATT mail.But yes the app said I'm not rooted except in one place can't remember cuz technically it's a crappy tablet.But according to Android Lollipop is rooted to Android manager.Not ATT Not me.So that's why we can't be undone unless you get specific permission from a Android form. At least that's my understanding
Sent from my 9020A using Tapatalk
charlessxavier said:
Hi all!! recently I had been searching a lot for support on my device Micromax P681 Tab.
I tried googling around as well as on xda but no result found or something totally not related to my device.
For rooting my tab - I attempted Kingroot, Kingoroot, towelroot, one click root & meshuproot tool (both PC software as well as mobile software) but nothing work. Under developer option I have enable OEM unlock from setting as well fastboot oem bootloader unlock and retried above mentioned root tools but all failed to root my device.
Please someone help me in rooting my tab
Click to expand...
Click to collapse
do you still need help? I have rooted Micromax canvas tab p681 successfully by porting TWRP recovery to p681 device.
Dharmendra_1111 said:
do you still need help? I have rooted Micromax canvas tab p681 successfully by porting TWRP recovery to p681 device.
Click to expand...
Click to collapse
Thanks mate, I did it as well.. Did you find any custom recovery yet ? Now I am searching for a good ROM or custom recovery.
charlessxavier said:
Thanks mate, I did it as well.. Did you find any custom recovery yet ? Now I am searching for a good ROM or custom recovery.
Click to expand...
Click to collapse
I do have ported working TWRP recovery, but xda won't let me post it unless I score 10 posts in forums. not a very smart step to fight spams, but that's how it is...
hello sir..how shll i do root my micromax p681 tab??
. i hv used almost all apps to get it rooted. but i failed. plese help. help me by describing the process of rooting this tab perfectly??
I want to root my Micromax Canvas p681 and need help
Hi Team,
I want to root my Micromax Canvas P681 tablet. Tried all other rooting options no go.. Tried ADB command root ,it says not permissible because it is a production build. It's a mtk8321 with marshmallow 6.0
Any help possible on this!?
Regards,
Kishor
charlessxavier said:
Hi all!! recently I had been searching a lot for support on my device Micromax P681 Tab.
I tried googling around as well as on xda but no result found or something totally not related to my device.
For rooting my tab - I attempted Kingroot, Kingoroot, towelroot, one click root & meshuproot tool (both PC software as well as mobile software) but nothing work. Under developer option I have enable OEM unlock from setting as well fastboot oem bootloader unlock and retried above mentioned root tools but all failed to root my device.
Please someone help me in rooting my tab
Click to expand...
Click to collapse
help needed to root micromax p681 tablet
i have been trying hard to root my device micromax p681 tab.but not getting any solution.please hepl.if u have any twrp files please forward to my mail [email protected]
Dharmendra_1111 said:
do you still need help? I have rooted Micromax canvas tab p681 successfully by porting TWRP recovery to p681 device.
Click to expand...
Click to collapse
Plz can u send the req. files at [email protected]
pratik.win said:
Plz can u send the req. files at [email protected]
Click to expand...
Click to collapse
----------------------------------------------------------
Warning: flashing may void warranty or brick device.
applies to:
Micromax Canvas Tab P681
marshmallow 6.0
MMX_P681_SW_V2.2_HW_V1.2_10092016
How to install:
Unlock Bootloader if haven't yet and flash recovery via Fastboot
fastboot flash recovery recovery.img
How to Root:
install Superuser.zip from recovery
Downloads:
Driver, Recovery
https://drive.google.com/folderview?id=0B6KfvNWgBbV6ZTFZdXJDeDFZVUU
----------------------------------------------------------------
---------- Post added at 10:19 PM ---------- Previous post was at 10:16 PM ----------
SUBHAM BOSE said:
hello sir..how shll i do root my micromax p681 tab??
. i hv used almost all apps to get it rooted. but i failed. plese help. help me by describing the process of rooting this tab perfectly??
Click to expand...
Click to collapse
Warning: flashing may void warranty or brick device.
applies to:
Micromax Canvas Tab P681
marshmallow 6.0
MMX_P681_SW_V2.2_HW_V1.2_10092016
How to install:
Unlock Bootloader if haven't yet and flash recovery via Fastboot
fastboot flash recovery recovery.img
How to Root:
install Superuser.zip from recovery
Downloads:
Driver, Recovery
https://drive.google.com/folderview?id=0B6KfvNWgBbV6ZTFZdXJDeDFZVUU
---------- Post added at 10:20 PM ---------- Previous post was at 10:19 PM ----------
kkb351 said:
i have been trying hard to root my device micromax p681 tab.but not getting any solution.please hepl.if u have any twrp files please forward to my mail [email protected]
Click to expand...
Click to collapse
Warning: flashing may void warranty or brick device.
applies to:
Micromax Canvas Tab P681
marshmallow 6.0
MMX_P681_SW_V2.2_HW_V1.2_10092016
How to install:
Unlock Bootloader if haven't yet and flash recovery via Fastboot
fastboot flash recovery recovery.img
How to Root:
install Superuser.zip from recovery
Downloads:
Driver, Recovery
https://drive.google.com/folderview?id=0B6KfvNWgBbV6ZTFZdXJDeDFZVUU
---------- Post added at 10:21 PM ---------- Previous post was at 10:20 PM ----------
Kishordhruv said:
Hi Team,
I want to root my Micromax Canvas P681 tablet. Tried all other rooting options no go.. Tried ADB command root ,it says not permissible because it is a production build. It's a mtk8321 with marshmallow 6.0
Any help possible on this!?
Regards,
Kishor
Click to expand...
Click to collapse
Warning: flashing may void warranty or brick device.
applies to:
Micromax Canvas Tab P681
marshmallow 6.0
MMX_P681_SW_V2.2_HW_V1.2_10092016
How to install:
Unlock Bootloader if haven't yet and flash recovery via Fastboot
fastboot flash recovery recovery.img
How to Root:
install Superuser.zip from recovery
Downloads:
Driver, Recovery
https://drive.google.com/folderview?id=0B6KfvNWgBbV6ZTFZdXJDeDFZVUU
Root micrmax p681 tablet
I downloaded the files you provided in google drive.But i am unable to proceed further please provide a tutorial how to complete all the steps?please??In device manger there is a adb driver exclamation markafter i follow the driver installation process.
kkb351 said:
I downloaded the files you provided in google drive.But i am unable to proceed further please provide a tutorial how to complete all the steps?please??In device manger there is a adb driver exclamation markafter i follow the driver installation process.
Click to expand...
Click to collapse
(1) in settings > developer options > oem unlocking (turn it on)
(2) install drivers provided
(3) Google and download "adb" if you don't already have it
(4) open command prompt and enter commands ...
> adb devices
it displays connected devices
> adb reboot bootloader
wait until rebooted to bootloader mode
> fastboot oem device-info
to check if flashing is allowed
>fastboot flash c:\recovery.img
provide path to recovery file downloaded instead
(4) if you don't understand all this, don't attempt it.
hello mr. dharmenda_111.could you please explain every thing in laymans terms how did
pratik.win said:
Plz can u send the req. files at [email protected]
Click to expand...
Click to collapse
hello mr. dharmenda_111.could you please explain every thing in laymans terms how did you root micromax p681
.please tell me as soon as possible. I dont have a pc so please tell me something pc-free. I tried every celebrated app like kingo,kingroot etc. But to no avail
Hi everyone, can someone please help me @Dharmendra_1111 or other people here. I need to root this antique. send me a link of recovery file on [email protected] Please or let me know where can i find it. model micromax p81
Awaiting reply with high hopes.
charlessxavier said:
Hi all!! recently I had been searching a lot for support on my device Micromax P681 Tab.
I tried googling around as well as on xda but no result found or something totally not related to my device.
For rooting my tab - I attempted Kingroot, Kingoroot, towelroot, one click root & meshuproot tool (both PC software as well as mobile software) but nothing work. Under developer option I have enable OEM unlock from setting as well fastboot oem bootloader unlock and retried above mentioned root tools but all failed to root my device.
Please someone help me in rooting my tab
Click to expand...
Click to collapse
I don't know it works or not, but but it may help,