My Fujitsu M532's battery won't charge anymore. I have just bought a replacement tablet (Samsung Note 10.1), so I want to take it apart and see if I can replace the batteries. But I'm not able to find any instructions on the disassembly. If anyone have a guide please share. Thanks.
awdrifter said:
My Fujitsu M532's battery won't charge anymore. I have just bought a replacement tablet (Samsung Note 10.1), so I want to take it apart and see if I can replace the batteries. But I'm not able to find any instructions on the disassembly. If anyone have a guide please share. Thanks.
Click to expand...
Click to collapse
Bump. If anyone has disassembled the M532 before please help. Thanks.
Related
Hey,
My phone (Samsung Galaxy S i9000)'s charger port has broken, and i'm not a fan of goin soldering it in, so i was just wondering if i could replace that whole board? i can get one pretty easy so that's why i'm wondering. i'm aware that the NAND and all that is on this board so thats why im asking. i dont mind losing my personal data just wondering about the phone. here's a pic of the board: i'm not allowed to put in the link yet! i will after, but it can be found easy enough i'm sure
Thanks
Nertballs said:
so i was just wondering if i could replace that whole board?
Click to expand...
Click to collapse
yes possible, everything you need for doing it can be found under Guides in My Android Collections
Well fellas, recently bought a Galaxy Tab2 10.1 GT-P5113, and no charger was included . I need to order one ASAP. Ive looked on amazon and ebay, found some but amazon reviews state that it will charge at a very slow rate. I dont want something like that. Not sure if i need to buy a special charger required for this model or what. Can anyone help me out and point me in the right direction? all help is appreciated. Thanks guys!
1slow4G said:
Well fellas, recently bought a Galaxy Tab2 10.1 GT-P5113, and no charger was included . I need to order one ASAP. Ive looked on amazon and ebay, found some but amazon reviews state that it will charge at a very slow rate. I dont want something like that. Not sure if i need to buy a special charger required for this model or what. Can anyone help me out and point me in the right direction? all help is appreciated. Thanks guys!
Click to expand...
Click to collapse
I purchased one on amazon and had no such issues with slow charging. It was awhile back so I don't remember exactly which one I got. It was just a generic charger labeled for use with Samsung.
IFLATLINEI said:
I purchased one on amazon and had no such issues with slow charging. It was awhile back so I don't remember exactly which one I got. It was just a generic charger labeled for use with Samsung.
Click to expand...
Click to collapse
Yeah ended up ordering one off of ebay. We'll see how it charges when i recieve it
Sent from my SGH-T999 using xda app-developers app
Hi guys,
Do any of you know on where I can get a replacement for the usb cover here in Jeddah, KSA?
Thanks!
zerodynamyx said:
Hi guys,
Do any of you know on where I can get a replacement for the usb cover here in Jeddah, KSA?
Thanks!
Click to expand...
Click to collapse
Did you try ebay?
Is this that you are looking for?
http://www.ebay.co.uk/itm/USB-Cap-MicroSD-Cap-Sony-Xperia-Z-Ultra-C6802-C6806-C6833-C6843-Black-Pack-ORIGI-/151134774990?pt=UK_Replacement_Parts_Tools&hash=item233055a6ce#shpCntId
Found it before, so I was looking for a cheaper alternative. It looks like this is my only option. Thanks, though.
Hey Guys,
My girlfriend is having alot of problems with her phone lately.
It was turned off occusionaly during the day.
I've replaced the rom on her device and though it would fix it.
I bought the akku polarcell 1800mah for her because I had good experience
on the past with polarcell battery for my previous galaxy s1.
Guys I don't really know what to do and my girlfriend is counting on me to fix this ..
I told her to put some papar near the battery to have it better grip with the electricity circuit.
Maybe there is a Corrosion- how to fix this?
Guys,
Please let me know your input on this and how to solve this.
Looking forward for any input- thanks in advance.
All the best!
thanks you guys
Be nice and get her a new phone. Keep the S2 for your ownself. Problem solved!
You can't really fix corrosion, because it tends to spread slowly throughout the device over time. It depends on what's damaged, if you're lucky it might only be the USB board which is cheap to replace, if it's components on the motherboard then replacing that is more expensive, if it's through the whole phone it might even be a bin job because it's probably going to continue to get worse over time.
Only way to know for sure is to take it to someone qualified (I.E a mobile repair shop) & have them take a look.
Edit - Or...You could replace the USB board yourself & see how that goes. It's easy/quick/cheap (~US$10) to do yourself, search for KeithRoss39's guide in General (search for 'replacing USB charger board' or similar), and if you're lucky this solves the problem. If it doesn't, then you take it someone qualified for diagnosis (and in changing the USB board, as you're pulling the phone apart, you'll be able to see if/how much corrosion is there).
Thanks for the quick replies.
The issue is we don't want to invest money in this and would rather staying with the phone as it is if needed.
How can I make it better?
Any Idea?
Did you even read my post ?
You can't. It's obviously something hardware-wise going on. You can either take that advice & possibly fix the phone, or put up with it in its current state. There isn't anything 'easy' you can do.
biotech326 said:
Hey Guys,
My girlfriend is having alot of problems with her phone lately.
It was turned off occusionaly during the day.
I've replaced the rom on her device and though it would fix it.
I bought the akku polarcell 1800mah for her because I had good experience
on the past with polarcell battery for my previous galaxy s1.
Guys I don't really know what to do and my girlfriend is counting on me to fix this ..
I told her to put some papar near the battery to have it better grip with the electricity circuit.
Maybe there is a Corrosion- how to fix this?
Guys,
Please let me know your input on this and how to solve this.
Looking forward for any input- thanks in advance.
All the best!
thanks you guys
Click to expand...
Click to collapse
What rom did you put on it?
Aosp or sammy-based?? The reboots can be software related
Sent from my iPhone using Tapatalk
erdal67 said:
What rom did you put on it?
Aosp or sammy-based?? The reboots can be software related
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
It's a very custome israeli rom
called yoelz-rom
Hello, I am looking to change my battery that has swollen.
Do you have an idea where to buy it?
AFAIK you can't buy new batteries, nor can you remove the old one unless you know exactly what you're doing.
it is removed from the phone but I can not find a seller for this item ......
aliexpress, there is a lot of stuff for our phones. i picked up the screen about a month ago, and it cost only 20$.
I also bought a screen for this phone on this site, but there is no battery ...
bubu3333 said:
I also bought a screen for this phone on this site, but there is no battery ...
Click to expand...
Click to collapse
I have also bought a screen from AliExpress, but there are no instruction on how to replace. Do you have any kind of instructions? I can only find remove the screws on the bottom and the simcard holder, then use a prying tool between the bezel and the backplate. But this is very limited? Any advice? Ofcourse doing it is all at my own risk, but I need some help
Hello ,
I found a video on "youtube" for a tutorial done in Russia.
Hoping that it will be useful
cordially
bubu3333 said:
Hello ,
I found a video on "youtube" for a tutorial done in Russia.
Hoping that it will be useful
cordially
Click to expand...
Click to collapse
Hi Bubu,
I can't find the video. Do you have the link or can you post the title (if a link wouldn't be allowed).
Any help is probably better that none.
A local phone shop was able to open it. Now I am removing all parts. I am currently stuck with the battery, but I expect the screen will also be a challenge. At least it seems it was at the first Swift.
Thanks,