Hi,
I have Gionee's Elife E7 mini. I am need some help regarding creating a playlist in the music player. The snapshot of the music player is attached.
Another Issue is regarding the USB OTG. When I saw on certain websites it says that this device supports USB OTG. But it is not recognizing the device. I dont know the problem. I have allOne OTG Cable Micro USB which I ordered from infibeam.com. Is there any specific OTG cable that I have to use with this device or the specific format/size of the USB Pendrive.
Please help.
Thanks.
Related
Hi folks!
I need the OTG/USB Host function on my Jiayu G3. Normally it doesn't support it..
So I did i lot of research and tests at "how i can enable it" and found some information:
1. some things point to it, like the libusbhost.so in /system/lib
2. all 5 pins of the usb slot are connected to a chip (this says nothing, i know)
3. i have found a pdf, which says that otg is possible on mt6575-77 (found on github)
So my question, has anybody get otg/usb host get enabled on Jiayu G3 oder m65xx phones? OR is anybody there who want the same like me and helps me to make it possible?
OTG unlock
Hi
I have a similar problem with my Jiayu G3s (MTK6589T).
For most USB devices it does not react but i hope there is a chance to make it work.
I do not know if it si trustworthy but according to USB OTG Checker my device supports USB OTG.
When i insert one of my USB flash drives i can find sdcard1 folder (total commander) . It is empty but it reacts.
Can anybody please help or just explain what is the problem. Thank you
USB Cables
Djoudie said:
Hi
I have a similar problem with my Jiayu G3s (MTK6589T).
For most USB devices it does not react but i hope there is a chance to make it work.
I do not know if it si trustworthy but according to USB OTG Checker my device supports USB OTG.
When i insert one of my USB flash drives i can find sdcard1 folder (total commander) . It is empty but it reacts.
Can anybody please help or just explain what is the problem. Thank you
Click to expand...
Click to collapse
Hi there,
I think I have a possible solution for this case.
Many USB cables are not correct to link with computer. I have two cables, one of Jiayu and other (more thin) brought in a chinese store. The cable brought in chinese store don't work to link with computer.
I hope this information was useful.
Any updates?
maxiandroid.blogspot.com/2012/06/usb-otg-android.html
This might help. Using an apk it is possible to make it work, IF kernel supports it. Don't know if phone has hardware support though...
I've read here that you should connect the ID pin to a pull-down 150k resistor, then to GND.
Hello,
I've used my tablet with flash drives etc. with the OTG cable. Before few days the OTG stopped working.
I though it's from ES File Manager because I use this app very often and I have clicked somewhere and disabled the OTG function.
So, I made decision to pre-install my android firmware and clear everything. > I did this.
And then I put the OTG cable with the flash drive connected and then a USB mouse - the flash drive does not connect, the optic ot the mouse only lights up and then it goes off and the mouse does not work too. I tried the OTG cable on my phone (SGS 2) and it's working perfectly.
Can you guys help me to solve this problem?
hey guys
i have xolo q1000s and i have tried usb otg but it doesn't gets connected. even i have used apps like usb host controller,usb otg helper and lots more but still no success and yes i have a rooted device
hope anyone can help me
i have read its possible to add otg if your device supports usb host by modifying your kernel but couldn't find any proper info
some screenshots:
Hi,
does any of the countless i9100 (not "G") ROMs have OTG support?
Best regards,
toshibashi
CyanogenMod does support OTG.
Just checked with CM12.1.
And when i remember correctly, Cm11 worked as well.
I have cyanogenmod 12.1-20160106 Nightly-i9100 kernel 3.064-cm-gd71763e [email protected] #1. I have enable Android debug brigde and usb debbuging but OTG is not working. The cable is tested on a sony experia tablet and works fine with usb mouse and usb flash drive. I have also download several programs like USB OTG Helper, Stick (something), and others i don't remember. One of them said s3c usb host driver is missing. Any idea how to fix OTG?
Thanks in advance
What is OTG?
Web_Monster said:
What is OTG?
Click to expand...
Click to collapse
OTG is the ability of a phone to connect USB devices with an adapter connected to the microUSB port. You can connect keyboards or USB sticks, for example.
Well I run stock CM12.1 and never had any problem with OTG. I don't know if it might be the problem that your USB OTG adapter is not from Samsung?
dear all android developer and user , i've some curiosity regarding OTG and usb host.
-> is there any difference between OTG and USB Host? i run a portable usb speaker. it can detect that. some OTG suported device does support only pen drive/flash drive+Mouse+KyBrd. does not detect any HDD/USB speaker (eg Moto E 2nd/ local Chinese brand). i just want to know the difference of their OTG system. or usb host system.
-> My moto G gives over 4 volt through OTG and that can fluently run any portable HDD without any extra power (any rom). its tested and i use a portable HDD. did you found any other set with this feature? i didnt found any.
sorry for my long post. hope u'll share ur knowledge if got enough time to reply. thanks.