Pomp P8 font problem. - Android Q&A, Help & Troubleshooting

I installed software that adjusted the fonts and then had to reflash the phone. The problem is that the fonts have all disappeared so it shows no text anywhere. I have tried to install the font zip update to try and replace them and having tried several zip files they all come up with an signature verification error and refuse to install.
The problem is I cannot get the phone to run properly without the fonts - its not rooted so it wont install them, I cant get a copy of the phone rom. Is there any way I can get this phone back and working without having the phone actually working in normal (non recovery) mode?
I have flashed phones before so I have experience with this sort of thing but this has me completely stumped.

flash this font http://forum.xda-developers.com/devdb/project/dl/?id=7704

It didnt work. Same error. Am using SD card to try and install and every single time get this E:signature verification error. Have tried looking elsewhere on here and found nothing that makes any sense as to solving this problem - I dont really want to chuck out a perfectly useable phone so if anyone has any ideas, pleae let me know.

Related

[Q] Partian problem?

I have been trying to add a rom to my lg optimus-t for pretty much the whole afternoon. I rooted it fine but when I tried to install AmunRa to make a recovery but that failed that was ok though since the ROM I ended up choosing asked for a different recovery system. The ROM I chose to use ciaox's openoptimus build
So I installed ROM Manager and did a recovery with clockwork mod, everything seemed fine until I loaded the clockworkMod and got E: bad boot message "recovery" I decided to continue anyways and followed the steps and when I finished part one it actually booted up, but I was unable to see any icons. All I was able to see was the lock screen and the network manager bar at the top.
There is a second part so I thought maybe if I went through all of the steps it would fix itself. It was all going great until I got to phase 2 #16 because it just wouldn't do it and the error message I got was "you cannot program the qcsbl header without the partition". in my infinite wisdom (dun dun dun) I decided to re-install everything, went to the recovery file and nothing happened, said it didn't exist. I had the rom so I decided to wipe the phone again and re-install it, now it doesn't even load and I realized I should have stopped to re-install somethings in the beginning.
Thankfully the clockworkMod recovery still boots and I have all functionality there(Well except for the recovery), so is there anyway for me to get 2.2 and install that into my phone to start all over again? A quick answer would be awesome, sorry for the novel, TIA.
Edit: got the rom up and running again, but I am back at the :"The Application settings (process com.android.settings) has stopped unexpectedly. Please try again" stage where I get the full unlock screen and the top bar that work, the emergency dialer still works as well. I tried doing phase2 again and following the instructions, but the phone goes into emergency mode and shuts off. At this point I'm thinking of trying another more simple ROM where I dont have to change the basebands, does that sound like a good idea?

[Q] Help, please! Flashed zip-killed network connection

Hello All,
(Sorry this might seem long but if you are good at rooting it's a quick read)
I could use some help. I have a rooted Eris and I have flashed a few different ROM's without a problem (New to rooting and flashing). I was recently running xtrsense and tried to flash a lockscreen called 3ring.zip. After that my network was lost. I do not have a nandroid backup (I now know why I should although I thought I did the first flash but can't find it now) and have re-flashed, wiped, factory reset numerous times with no luck. Everytime I do the phone goes through the setup but tells me that I don't have a network and to use wifi. It's not my Verizon account because I have reconnected an old phone in the meantime with no problem.I even installed a flashback zip to unroot but it doesn't work (it tells me E: No signature (1873 files) and E: Verification Failed and Installation Aborted).
I could really use someone's help.
Thanks,
CJ
Did you try re-activating the phone? Dial *228 and choose option 1.
Doing this from xtrSENSE should be fine. See if that helps.
Those error messages from flashing Flashback sound like you had an incomplete download. You also get error messages if you try to flash with a battery less than 30% (I think... it may be 25%?) but I think that the error is different.

Help!, Xperia U,URGENT!

Yesterday i tried to install this rom(http://forum.xda-developers.com/showthread.php?t=1889581 ,Xperia Fidelity JB v1.0 (JB) on my Xperia U ST25a, so i went to recovery and install it as normal and the install was succesfull,but when i turned on my phone again the wallpaper took a lot of time to load and they will apear a lot of windows on my phone saying"system UI has stopped working would you like to close it?",and a lot of crashes, so i tried to factory reset it and i did, but when i turned on again after the factory reset the phone will do the same, oh and the CMW recovery is gone, i cant connect it to the computer to install it again, it says "USB connectivity has crashed" and the worst part is that when i try to download an apk from internet it says that SD card is required to download the file(but xperia u doesn't have a SD slot!),now i cant remove the rom i installed and my recovery and notification bar are gone,and when someone is calling me the phone will just vibrate but it wont show the answer/deny screen, i just can send sms and call please help me with this,this is frustrating!
Federic321 said:
Yesterday i tried to install this rom(http://forum.xda-developers.com/showthread.php?t=1889581 ,Xperia Fidelity JB v1.0 (JB) on my Xperia U ST25a, so i went to recovery and install it as normal and the install was succesfull,but when i turned on my phone again the wallpaper took a lot of time to load and they will apear a lot of windows on my phone saying"system UI has stopped working would you like to close it?",and a lot of crashes, so i tried to factory reset it and i did, but when i turned on again after the factory reset the phone will do the same, oh and the CMW recovery is gone, i cant connect it to the computer to install it again, it says "USB connectivity has crashed" and the worst part is that when i try to download an apk from internet it says that SD card is required to download the file(but xperia u doesn't have a SD slot!),now i cant remove the rom i installed and my recovery and notification bar are gone,and when someone is calling me the phone will just vibrate but it wont show the answer/deny screen, i just can send sms and call please help me with this,this is frustrating!
Click to expand...
Click to collapse
that's weird... here's a possible workaround but you're gonna need another android phone or something else that you can bluetooth things over to your phone with. ok, so you still have root access hopefully. so first lets solve the recovery problem, download the latest apk you can find for rom manager of the internet, bluetooth it to your phone. install, through this install cwm recovery, now bluetooth a rom and gapps you know are stable to your phone, finally boot into CWM and install. hope this works!
blu422 said:
that's weird... here's a possible workaround but you're gonna need another android phone or something else that you can bluetooth things over to your phone with. ok, so you still have root access hopefully. so first lets solve the recovery problem, download the latest apk you can find for rom manager of the internet, bluetooth it to your phone. install, through this install cwm recovery, now bluetooth a rom and gapps you know are stable to your phone, finally boot into CWM and install. hope this works!
Click to expand...
Click to collapse
Yeah, i have root acces still and the playstore still works, i already have rom manager, when i enter the program it will tell me"SD card needs to be mounted before using rom manager" well, i just press ok and the program will work "properly"(i think) , so i go to the recovery setup option and i try to to install and i select CMW 3.x+ and it tells me that the operation has been succesfull now i try tp reboot into recovery and it wont work still

[Q] [HELP] ZTE Kis Pro - RO Orange Zali problem

Hi xda-developers. I'm iDatFuuzy and i have this little (huge) problem. So, I was messing with some ROMs on my phone (Orange Zali RO) when I install an messed up boot animation (the actual messed up part is the resolution i think). Then I was like <OK. Reboot should help.> So I rebooted and I simply booted to android but with one problem: everything is INVISIBLE. I still can push buttons and stuff and I can hear if someone calls me but I can't see a thing ! I then tried to factory reset from the recovery, but that didn't fix, since it only formatted my Data and my cache folders. After that, I tried to re-install the Stock-ROM and I had another problem then: After verifying update package, at the half it says this: Installation Aborted. I have downloaded the OFFICIAL ROM from ztedevices.com and I have not modified it in any sort of way. So, can I fix this somehow ? I tried messing with my updater-script without any help. BTW before this happened (about 5months) I rooted my phone so THAT is not the reason for this.

Issues With Honor 8

After I stilled root and xposed with TWRP for this post: https://forum.xda-developers.com/honor-8/development/twrp-t3566563 , it worked fine, but after I tried installing a different type of root, xposed framework stopped working as it should. I tried using a backup of complete stock, but when I booted the device with the restored backup, it was like only half of the ROM was restored. I was missing muliple of stock apps, and thos that was there didn't work. Not even settings.
Then I did my attempt at flashing the stock EMUI with the "dload" folder method. But every time I try it just says "Update Failed".
As I last resort I went to custom ROM's cause I need a device with basic Internet and phone supper atleast. But when I flash ANY custom ROM, it just reboots a few times and the screen stay black. It's like the device is still on, and I know this because when I plug it in my PC in this stage, windows gives out a unknown device plugged in.
I have been trying and googeling for the past two days. And I really am lost...
I apriciate any attempt to help me!

Categories

Resources