[REQUEST] Request CWM recovery for Vido N90 FHD - Android Q&A, Help & Troubleshooting

Hello.
I need CWM recovery for my chinese tablet (Vido N90 Quad-Core FHD)
It only has 2 button: Power and Return (Back). To enter recovery I have to press Power and Back.
Since it's fully touch so the recovery is touch (no volume buttons )
I tried dumping recovery.img so I can do it my self but somehow I cannot dump it because ADB doesn't reconize recovery partition (only nanda, nandb,nandc,nandf,....... no recovery).
Here's the link of it's rom: http://pan.baidu.com/s/1qqWwM
Please help me if you can :fingers-crossed:
Thanks.

Related

[Q] Flashed clockworkmod touch into boot

I got the img of clockworkmod touch and silly me executed the following command
fastboot flash boot recovery-clockwork.img
Now everytime I boot it goes into clockworkmod touch. I need to flash the boot.img of my kernel. I don't know how to go to fastboot just using volume and power keys as the volume up+power goes into recovery again. Please help.
Fixed - Luckily I had full backup made by clockworkmod a while ago, and was able to restore the /boot from it and got it working.
The complexity was that even the 'Power' + 'Volume down' that should bring up Fastboot, broughtup the clockworkmod touch since I had flashed it to the boot.

[Q] E-Pad QUAD TS-M973G-IPS Recovery mode ? ( Only Power/Back buttons)

Hello
The soft of the tablet somehow is bricked...
I want to enter recovery mode to hard reset it .
But this tablet only has 2 buttons (power/back)
If I reset the device and than hold down power+back brings me the android logo with no command...
And thats all .. I don't know how to go further to acces the recovery menu .
If anyone managed to enter recovery on tablets with only 2 buttons pls help
Or any help to get this tablet alive ?? please .. it has a RK3188 chip

[HELP] unlock Boot Loader XOLO Q1000.

Hello XDA,
I have a XOLO Q1000 with a stock Android 4.2.2 rooted ROM.
My phone Have 4 Hardware keys..
1. Power key (right)
2. Volume keys[+/-] (left)
3. dedicated camera key (left)
Yesterday, I was installing CWM recovery in my phone. But I mistakenly found a boot loader in my phone. It was the power key and the camera key that I pressed together to access the boot loader. It has 3 Options:
1. Fast Boot
2. Recovery Mode
3. Normal Boot
But none of the options are working.
I tried to press all keys but none of keys are working. The only thing I can do is to navigate through these options.
I can access recovery by regular method(power+volume up).
But not with Boot loader.
I think its locked in someway.
pls help Me to find out the way to unlock it.
is there anyone who can help me

[Q]how to boot into recovery mtk6582(kk)

my device is Celkon q42
mt6582
4inch
512 MB ram,4gb rom
I have ported twrp and philz touch recovery rooted too.
I can boot into recovery by mobile uncle or any Rebooter app .
but my problem is I can't boot into recovery by hardware keys .
vol- and power is factory mode
vol+ and power
it shows 3options
1 recoveryy
2 fastboot
3 normal (press vol+ to select and vol- is OK)
but I can't select anything by pressing vol- or any butbutton
plz help:crying:
sudhansu7 said:
my device is Celkon q42
mt6582
4inch
512 MB ram,4gb rom
I have ported twrp and philz touch recovery rooted too.
I can boot into recovery by mobile uncle or any Rebooter app .
but my problem is I can't boot into recovery by hardware keys .
vol- and power is factory mode
vol+ and power
it shows 3options
1 recoveryy
2 fastboot
3 normal (press vol+ to select and vol- is OK)
but I can't select anything by pressing vol- or any butbutton
plz help:crying:
Click to expand...
Click to collapse
Hello,
i have a huge problem with my Blackview Ultra Chinaphone (MTK 6582). I managed to make all necessary backups with MTK Droidtools and i manages to install a custom recovery (TWRP latest version) which wasn't easy because the recovery screen was flipped and the touch screen inverted but i have a flipped recovery with proper working touch now.
My problem is that i am unable to boot into recovery via the hardware buttons. When i press powerbutton+volume down button some chinese menu appers. When i press powerbutton+volume up button (which you press to get into recovery with most chinaphones) a menu appers where i get 3 options and it says "volume down-button is OK". When i navigate to the "recovery" option with the volume up-button and want to confirm it with the volume down-button nothing happens. the button works when fully booted so it can't be a hardware defect. i have to press powerbutton+volume up (the cursor starts to jump between options) until the phone boots normally. the recovery works, because when i boot into it (with rom manager for example) everything works fine. i want to try out a few roms so it is essential for me to be able to boot into recovery with the buttons in case i damage something while flashing.
i would be so glad if anyone could help me !
please excuse my english, it's not my native lenguage!
greetings
Argarash
*push*
this is very urgent and annyoing..i can't flash anything in case i make a mistake while porting..

Yarvik Ingenia X1

I have a big problem with this phone. And it is a bootloop which I can't resolve because I can't find any stock or custom ROM for it. On startup it just show Mediatek and it goes on and on. When I'm holding a Volume + button it goes to recovery. It's a CWM recovery, to be precise it says : Virtual autoCWM v5.5.0.4 for GT-N7100, which is Note2. What should I do?

Categories

Resources