As the title says my device is not recognised in adb ?
I,m S Off unlocked installed every driver going tried different leads different ports different pc (windows 7) Usb debugging ticked , quick boot unticked !
It sees my device in fastboot mode too
been trying for days now can anyone help ?:crying:
marra2 said:
As the title says my device is not recognised in adb ?
I,m S Off unlocked installed every driver going tried different leads different ports different pc (windows 7) Usb debugging ticked , quick boot unticked !
It sees my device in fastboot mode too
been trying for days now can anyone help ?:crying:
Click to expand...
Click to collapse
Dow load pdanet
Related
Hello everyone,
I've searched for a solution over the forum but I didn't find any solution..
So my problem is that I can't use Odin because windows doesn't recognize my phone on Download mode.
I have the drivers installed, Kies and windows recognize my GS2 without problems.
I've tried with different cable, different USB port, uninstall/reinstall drivers many times, from Kies or from samsung web site.
I just have no idea why in download mode windows doesn't use the installed drivers..
Help?
Thanks!
Did you try in a different PC?
I am sure driver is the only cause. Perhaps you can try following. Install Kies, then connect phone once and check if Kies detects your phone
Which version of Windows are you using? I am using Windows 7 and its working fine. I did root yesterday and Windows detected drivers and also it had to download from net for some reason. In the end it did work
USB cable to main board connection .
Reboot phone turn USB debugging off .
Set USB to Mass storage mode .
Connect cable and let Windows find USB drivers .
jje
Did you terminate every Kies process before opening Odin?
Hello,
Thanks for the answers.
I'm running on windows 7 64. But it didn't try on another pc.
Windows does install drivers and recognize my phone in USB to Mass storage mode.
But still not recognize it in download mode and yes I've terminated every Kies process.
I know that in Download mode windows install some new/different (?) drivers. When I'm on download mode, windows fails to install driver as it's an "unknown device". Is there a way to install those drivers manually?
Hello,
Un-install Kies, reboot system, reinstall kies.
Still not work. After reboot and reinstalling Kies my phone was recognized, but in download mode there is still nothing.
If windows has USB drivers then download mode works .
Is USB debugging turned off .
Reboot phone
Enter download mode follow instructions on download mode screen .
Open Odin select files to flash
Connect Samsung USB cable to mainboard port .
Hit start on Odin .
jje
USB debugging is off.
But as windows don't recognize the device, Odin can't detect it in download mode.
It's really weird
messem said:
USB debugging is off.
But as windows don't recognize the device, Odin can't detect it in download mode.
It's really weird
Click to expand...
Click to collapse
Post the steps you are taking from the very beginning .
jje
Ok, I manage to get this working.
I did this:
-I have unplugged all the USB on my motherboard, I've uninstalled all the "Universal Serial Bus controllers" (to acces type devmgmt.msc in windows start menu)
-Turn off the PC and unplugged the power supply. Waiting like 3 minutes.
-Replug the power supply and boot.
-Replug all my USB, windows reinstalling everything.
-Plug my phone in download mode and windows finally installed the drivers and Odin detect it !
So if someone have a unknown device issue with a code 43, please try this.
Thanks for your time and answers.
Disabling the "unknown device" and then disconnecting and reconnecting my phone worked for me.
Run Kies as Administrator, Install Drivers
This is what worked for me. Kies said the Drivers were installed without Administrator but nothing worked
JJEgan said:
USB cable to main board connection .
Reboot phone turn USB debugging off .
Set USB to Mass storage mode .
Connect cable and let Windows find USB drivers .
jje
Click to expand...
Click to collapse
This fixed the problem for me thank you very much !
I installed all motorola atrix 2.2.2 froyo drivers on a xp sp2 and was running good then put the phone on debugging mode and connected by usb but windows was like looking for other phone and asking me to install again for drivers i didnt installed so using the last version of superopenclick then hit root but it just stay on looking for device and never found it. so cant root
when I turn off debugging mode all is ok again and windows doesnt ask for drivers .
Simply install the drivers windows is searching in debugging mode and try again. I don't know why but it needs two kinds of drivers sometimes
SimplicityApks said:
Simply install the drivers windows is searching in debugging mode and try again. I don't know why but it needs two kinds of drivers sometimes
Click to expand...
Click to collapse
i will try that but i dont what other drivers to install ?
unicito said:
i will try that but i dont what other drivers to install ?
Click to expand...
Click to collapse
i installed other drivers while debugging mode so used superclick 2.3.3 and voila all is ok ,, rooted atrix froyo! :fingers-crossed:
Hi my neo l not connecting in fastboot mode. I have updated all drivers but when i connect phone in fastboot mode a popup shows unrecognised usb device. Aldo not showing anything when i typed" fastboot devices " in cmd.
Mani-saini said:
Hi my neo l not connecting in fastboot mode. I have updated all drivers but when i connect phone in fastboot mode a popup shows unrecognised usb device. Aldo not showing anything when i typed" fastboot devices " in cmd.
Click to expand...
Click to collapse
Hello friend, try to connect to another USB port on your computer, if it does not work disconnect any USB devices you may have connected and try again, if still don't work is because drivers are not installed, try re-install them again, what windows version are you using, if it is Windows 8 there is special procedure how to install fastboot drivers,
Good luck
Yeah first make sure you see it in the Device Manager on Windows.
galarpo said:
Hello friend, try to connect to another USB port on your computer, if it does not work disconnect any USB devices you may have connected and try again, if still don't work is because drivers are not installed, try re-install them again, what windows version are you using, if it is Windows 8 there is special procedure how to install fastboot drivers,
Good luck
Click to expand...
Click to collapse
I have instaled all fastboot drivers. Also changed the cable.and in device manager it showing unknown device.
I am using windows 8 .which method for installing drivers???
how to
Mani-saini said:
I have instaled all fastboot drivers. Also changed the cable.and in device manager it showing unknown device.
I am using windows 8 .which method for installing drivers???
Click to expand...
Click to collapse
1- Hold SHIFT and restart you computer, always holding SHIFT or run this "shutdown /r /o"
2- You should be now on "Advanced Startup options", select "Troubleshoot" --->"Advanced Options"--->"Startup settings"--->"restart"
3- Next select option 7
4- plug your phone to computer in fastboot mode and install flashtool drivers, remenber to say yes on the windows appearing during installation, after everything is installed, restart your computer and problem solved.
My end goal is stock lolipop rooted.
I botched a flash and now I cant get developer mode / ADB working.
When I started, my tablet was stock ROM, towelroot. I connect tablet in developer mode, flashed dual recovery and everything was great. I copied the pre-rooted lolipop ROM to my SD card and flashed it. HOWEVER instead of turning off the device, I selected reboot from recovery. This resulted in boot loop.
SOOOO, I figured no worries, just flash old ROM and try again. So did this:installed Androxyde Flashtool
opened XperiFirm
downloaded 1276-8392 and 1274-8801 (I've tried the rest using both ROMs btw)
Tools>Bundler>Create>Selected folder>selected SGP312 for device
For branding I entered the above ie 1276-8392
For version I entered the ver ie 10.5.A.230
Flashmode>checked boxes to wipe everything
The flash goes through without a hitch. Under about tablet, I see
Model : SGP312
Android Ver : 4.4.2
Kernel : 3.4.0-perf-g32ce454, [email protected]#1
Build Number : 10.5.A.0.230
I activate USB debugging and unknown sources, connect to USB and Flashtool returns: Device connected with USB debugging turned off
I went into device manager and found the MTP driver. Also of note, the device ID is: USB\VID_0FCE&PID_5194&REV_0228
I downloaded Sony's ADB drivers, tried to manually update device driver and windows7x64 kicked back driver is not for your device.
I edited the INF to include the hardware ID exactly as it appears in device manager and tried again. This time windows let me load the driver. It shows up in device manager as 'Sony sa0107 ADB Interface Driver'
HOWEVER, Flashtool is still giving me the same MTP message and if I cmd prompt "adb devices" I get nada.
Is there a way to verify developer mode on the tablet? What else can I try? The tablet gives me a notification when I connect 'usb debugging mode connected, ready to install software'
Thanks!
_sadpanda said:
I went into device manager and found the MTP driver. Also of note, the device ID is: USB\VID_0FCE&PID_5194&REV_0228
HOWEVER, Flashtool is still giving me the same MTP message and if I cmd prompt "adb devices" I get nada.
Thanks!
Click to expand...
Click to collapse
I had a very similar problem in 2014. I do not want to discourage you, but at the end I send it back to sony for a repair. They gave me a new tablet and said that the mainboard was broken.
Nevertheless, there is a thread in Sony cross device general, where people like you end up: http://forum.xda-developers.com/showthread.php?t=1849170
You can try and search for help there, maybe you have more luck then me.
Its odd... ADB was working and stopped after flash. Is this what you had or just no connection from the start?
Sorry, I misread your post. I thought your tablet would not start and you could not get flashmode working. Sorry for that.
What you could try:
1. Be sure you actually activated USB debugging in developer options
2. When you connect the device, you should get a prompt on the tablet to allow usb debugging from that computer
Maybe try "revoke USB debugging authorisations" in developer options and reconnect
3. Install the drivers from flashtool/drivers/ or install sony pc companion. Delete your old driver from device manager.
4. try switching between MTP and MSC mode in usb connectivity menu
Since ADB worked before it was probably no driver problem. Now you cannot be sure. Most probably you tapped away the said prompt of allowing usb debugging when connecting.
If none of this helps I don't know of anything more. Maybe try different usb ports or even computers.... Or try to flash again
bernddi said:
4. try switching between MTP and MSC mode in usb connectivity menu
Click to expand...
Click to collapse
UGH!!! I'm a jacka$$. I totally forgot about that menu/setting. fixed instantly.
poco f1 not recognised in adb windows 10
I unlocked bootloader and re did the USB debugging but the computer wont reconize poco in adb.
I've tried portable and normal and run as admin and installed the drivers but not showing.....any help appreciated
Your PC has an AMD Ryzen?? Try Intel...
ashboe said:
poco f1 not recognised in adb windows 10
I unlocked bootloader and re did the USB debugging but the computer wont reconize poco in adb.
I've tried portable and normal and run as admin and installed the drivers but not showing.....any help appreciated
Click to expand...
Click to collapse
you have to enable MTP (File Transfer) in Pop Up Screen on Phone once the phone is plugged in
ashboe said:
poco f1 not recognised in adb windows 10
I unlocked bootloader and re did the USB debugging but the computer wont reconize poco in adb.
I've tried portable and normal and run as admin and installed the drivers but not showing.....any help appreciated
Click to expand...
Click to collapse
Here's what i did, (not for poco but it worked for mido, kenzo) downloaded mi flash tool and installed the drivers from it's installed directory. And it worked.
fmcheetah said:
you have to enable MTP (File Transfer) in Pop Up Screen on Phone once the phone is plugged in
Click to expand...
Click to collapse
I'm such an idiot! That was it!
Hi guys,
Need your help.. am facing some weired issue with POCO F1 ... with adb..
1. I have enabled the debugging.
2. installed the google drivers.
3. CMD check reflects the adb device.. <some numbers>..
4 When i tried to connect the phone via usb to mi suite or hisuite... they fails to recognize the Phone..
I have intel processor ... and I am able to transfer stuffs via MTP mode.. but the software aren't recognizing.. any suggestions..
I have all this below mentioned files ..
qualcomm_driver-4.zip
TOOL_ALL_IN_ONE_2.0.1.1.zip
usb_driver_r12-windows.zip
XiaomiADBFastbootTools-Win32-master.zip
Xiaomi-UniversalAdbDriver.zip
HiSuite_8.0.1.300_OVE.exe
latest_usb_driver_windows.zip
minimal_adb_fastboot_v1.4.3_setup.exe
MiSetup2.2.0.7032_2717.exe
Does it have anything to do with USB .. is ours 3.0 ?? and 2.0 works ?? is there any setup to be done in mobile ??
Attachment shows --
1. adb with ? mark .. (disconnected device)
2. ADB composite device (now connected device with udpated google driver).
Please guide..
mini2015 said:
Hi guys,
Need your help.. am facing some weired issue with POCO F1 ... with adb..
1. I have enabled the debugging.
2. installed the google drivers.
3. CMD check reflects the adb device.. <some numbers>..
4 When i tried to connect the phone via usb to mi suite or hisuite... they fails to recognize the Phone..
I have intel processor ... and I am able to transfer stuffs via MTP mode.. but the software aren't recognizing.. any suggestions..
I have all this below mentioned files ..
qualcomm_driver-4.zip
TOOL_ALL_IN_ONE_2.0.1.1.zip
usb_driver_r12-windows.zip
XiaomiADBFastbootTools-Win32-master.zip
Xiaomi-UniversalAdbDriver.zip
HiSuite_8.0.1.300_OVE.exe
latest_usb_driver_windows.zip
minimal_adb_fastboot_v1.4.3_setup.exe
MiSetup2.2.0.7032_2717.exe
Does it have anything to do with USB .. is ours 3.0 ?? and 2.0 works ?? is there any setup to be done in mobile ??
Attachment shows --
1. adb with ? mark .. (disconnected device)
2. ADB composite device (now connected device with udpated google driver).
Please guide..
Click to expand...
Click to collapse
My Phone is clean wiped..No OS on it...how can i enable debugging?