Hi Hi, First you, you are amazing ... do not understand how you can have so much knowledge about this.
Well I tell you my problem that I have spent one week in and I can not resurrect.
I stayed on the phone with samsung logo and did nothing mas..le install a room and before I came to end in the odin..ahora only fail I get a screen with a water blank and I can not put him any rom always gives me fail've tried everything and no result. Will help me I would appreciate. from already thank you to everyone s.
In product Name GT-I9300 I get as I have seen here the phone is not dead if it goes ... no?
I can also tell you that going into Downloading mode.
ODIN MODE
PRODUCT NAME: GT-I9300
CUSTOM BINARY: No
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
get Image Capture to see my screen as it has been
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thank you
first of all
-were you successful flashing the rom via odin and got a pass sign in green color on odin
-which version of rom are you trying to flash.
jasi275 said:
first of all
-were you successful flashing the rom via odin and got a pass sign in green color on odin
-which version of rom are you trying to flash.
Click to expand...
Click to collapse
Hi Thanks for answering.
I have proven with many Roms and always leaves me FAIL in Odin
I have also tried pit.
And whenever I get FAIL in Odin.
I have proven all Odin and I always get the same. FAIL
do you have kies on your pc if not install it, it will install proper drivers for s3 then odin might start working and one more thing odin only works if your phone is on download mode and the added is written
jasi275 said:
do you have kies on your pc if not install it, it will install proper drivers for s3 then odin might start working and one more thing odin only works if your phone is on download mode and the added is written
Click to expand...
Click to collapse
If you have Kies on the PC does not detect the phone.
if you always put the phone in download mode to connect to Odin
Odin if it detects the phone but always comes FAIL
extract the zip file see see if it is corrupted or use different version of odin like latest or old one
jasi275 said:
extract the zip file see see if it is corrupted or use different version of odin like latest or old one
Click to expand...
Click to collapse
The zip file where?
I have proven with all versions of Odin
mensajero2 said:
The zip file where?
I have proven with all versions of Odin
Click to expand...
Click to collapse
you do have a firmware file don't you the stock android .tar file which is used to flash the firmware via odin extract that
jasi275 said:
you do have a firmware file don't you the stock android .tar file which is used to flash the firmware via odin extract that
Click to expand...
Click to collapse
the S3 samsung firmware I have tried them all and does nothing.
Odin goes into FAIL
are you files in zip format or .tar format you do not get added sign in odin when you put your s3 in download mode is that right
jasi275 said:
are you files in zip format or .tar format you do not get added sign in odin when you put your s3 in download mode is that right
Click to expand...
Click to collapse
The Odin works as the problem is not always grabs any ROM out FAIL.
http://forum.xda-developers.com/galaxy-s3/help/samsung-i9300-flash-odin-error-t1842728 see this thread do you have a problem like this
mensajero2 said:
The Odin works as the problem is not always grabs any ROM out FAIL.
Click to expand...
Click to collapse
You cannot fix this with a software fix this is emmc failure you need a service center see this post >> http://forum.xda-developers.com/galaxy-s3/help/problem-white-screen-black-lines-rain-t2467459 << and the many other posts with same problem.
Related
Hi, I've decided to update the fw and have never used Odin before, I am following Intratech's instrutions and have pressed the pda button to find the .tar file but in file I downloaded (from Samfirmware ) doesn't seem to have .tar file?
What should the pda file be labeled as?
Follow instructions post 1
Flashing Firmware with Odin .
jje
JJE.. this what I see, what now?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Puzzled beyond belief
Lightfunkyone said:
JJE.. this what I see, what now?
Puzzled beyond belief
Click to expand...
Click to collapse
Looks like you have un-zipped the tar.
Sent from my GT-I9100 using Tapatalk
So am I not meant to unzip the winrar archive and just select it for pda, phone and CSC?
Just to point out that there are no .tar archives
Check the file extension on the zip, should be a .tar
Best to remove winrar and install 7-zip, it shows proper filename extensions.
Sent from my GT-I9100 using Tapatalk
I re-tracked my steps, I did unpack it...thanks.
Help!
I tried to flash Jellyblast v3 custom ROM on my Samsung Galaxy Y s5360l but its stuck at boot now. i have Odin downloaded and i downloaded the necessary files from hotfile to flash the stock ROM back on my phone but when i click PDA on odin and search for the file, it is not appearing. Help would be greatly appreciated. Oh, and i dont know if i have the latest firmware-I got this phone on Christmas 2012, but does that make a difference? The files are just not appearing with Odin. Thank You.
sgyboy8 said:
I tried to flash Jellyblast v3 custom ROM on my Samsung Galaxy Y s5360l but its stuck at boot now. i have Odin downloaded and i downloaded the necessary files from hotfile to flash the stock ROM back on my phone but when i click PDA on odin and search for the file, it is not appearing. Help would be greatly appreciated. Oh, and i dont know if i have the latest firmware-I got this phone on Christmas 2012, but does that make a difference? The files are just not appearing with Odin. Thank You.
Click to expand...
Click to collapse
Did you download the firmware from sammobile.com. If not download the latest firmware of your country from sammobile.com and the follow the correct procedure of how to flash the rom from odin you will find them on xda
Good luck :thumbup:
Help!
Thank you!
Yeah, I think we got that the first time you posted it
Lol
MistahBungle said:
Yeah, I think we got that the first time you posted it
Click to expand...
Click to collapse
Lol dude, posted that again accidentally. Sorry!
So you fixed the issue or you still need help ?
All Good
MistahBungle said:
So you fixed the issue or you still need help ?
Click to expand...
Click to collapse
No thanks, i got it fixed. Thanks for asking.:good:
I am having the same problem of my file clearly being located and visible in the location I want when viewing via Windows Explorer. Yet when I go into ODIN, the file doesn't show as an option. In the attached screenshot, ODIN shows me that there isn't ONE single file from this location that is usable via the PDA option?? Please help as this is really perplexing me.
Thanks!!
Hi Frnds,
I was trying to root my ICS 4.0.3 through CF Root "CF-Root-SGS2_XW_XEN_LP7-v5.4-CWM5" but i was getting result Fails?
ICS 4.0.3 INU (Official): I9100XWLP7
Baseband :I9100DDLPA
I also need a suggestion, can i also upgrade my FW with ICS 4.0.4 and then root it again?
Please suggest i m doing it first time.
Thanks in adv.
Hi,
which method did you try?
CWM Recovery or via ODIN (you need to go in Download Mode for Odin)?
You can update any FW - if you flash stock you have to root again, if you flash custom you got root (bcz of the implemented kernel)
The leaked 4.0.4 is not recommended to flash bcz of the hardbrick probs, and in your case i wouldnt try it bcz you already fail at flashing a kernel
greetz
Thansk for reply,
Yes i user Odin method select PDA "CF-Root-SGS2_XW_XEN_LP7-v5.4-CWM5". Yes via Download Mood only but still its failing.
Please suggest me what to do... i am waiting for reply.
ftrack said:
Thansk for reply,
Yes i user Odin method select PDA "CF-Root-SGS2_XW_XEN_LP7-v5.4-CWM5". Yes via Download Mood only but still its failing.
Click to expand...
Click to collapse
Could you be little bit more specific please? What do you mean by 'still its failing', does ODIN report an error? If so what is the error, can you provide a screen shot of the error message?
ftrack said:
Please suggest me what to do... i am waiting for reply.
Click to expand...
Click to collapse
We are all very sorry here to not serve you faster, apologizes. Be assured we are just sitting here waiting to answer your questions
ftrack said:
Thansk for reply,
Yes i user Odin method select PDA "CF-Root-SGS2_XW_XEN_LP7-v5.4-CWM5". Yes via Download Mood only but still its failing.
Please suggest me what to do... i am waiting for reply.
Click to expand...
Click to collapse
hey man tou have to extract the downloaded filebecause it is in zip format..
after extracting the downloaded file you will get another file which is in .tar format...you have to put this .tar file in PDA section of odin and disable antivirus,firewall etc.. and then start flashing...
Hi Frnds,
I have attached screenshot of Odin with fail message. I think now now can understand it properly and help me out to root my SGS2.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I don't know why i can't see the attached image www(com)freeimagehosting(com)net/4hbaa
ftrack said:
I don't know why i can't see the attached image www(com)freeimagehosting(com)net/4hbaa
Click to expand...
Click to collapse
Maybe I missed a new version of ODIN as I do not know the one you use. For the SGS2 I use ODIN 3 V1.85, see the title bar of the attached screen shot.
I suggest you try with ODIN 3 version 1.85.
I have both Odin version that is Odin3_v3.04 and Odin3-v1.85 but reason i m using latest one because in old one 1.85 odin doest reply any result though latest 3.04 atleast show me result fail.
I really don't know what is happening and how can i root my SGS2 4.0.3?
Please help me...
Nevertheless, please try with V1.85 and post resulting screen shot. At least we should see how ODIN gets stuck. Perhaps it is easier to debug even the information reported by V1.85 is not accurate.
PS: Please use the 'Manage Attachments' button to upload a screen shot.
I am here attached Odin Fail Report
Hi Frnds,
First thanks for all to helping out.. I have attached Odin Latest version screenshot and with old version 1.85 nothing is happening no result i mean. its just stuck after connecting device.
I have also attached my Mobile setting screenshot.
I hope that attached picture will help you to understand my problem
What makes you think that things will work better with ODIN V3.04 then with ODIN V1.85? The fact that you see more 'information'? Maybe this information is just misleading...
Anyway: from what you say ODIN V1.85 is doing (nothing!) I suggest you do:
1. make sure Kies is not running
2. reinstall the latest USB drivers
3. use another USB cable
4. try another computer
Ctrl+Alt+Delete. Task Manager>Processes. Kill anything that start with "Kies".
Odin and Kies are like sworn brothers. They hate each other. Run Odin in Windows XP compatibility mode & also run it as Administrator. This works for me and hope it will work for you too....good luck.
Thanks @fxrb and other frnd too,
Finaly i am able to successfull root my SGS2. Now please let me know what can i do next like i have remove few inbuild software and how i allow root permission to recording apps.Do i need to install superoneclick?
Thanks in adv
ftrack said:
Do i need to install superoneclick?Thanks in adv
Click to expand...
Click to collapse
NO, you don't need SuperOneClick since you have already rooted your phone. For removing/freezing/delete bloatware you can use Titanium Backup...
guys, my phone has been FINE for ages on I9300XXBLG8 ..then on friday while charging off my laptop ..i pull the plug and boom, it force restarts.
and has been doing so ever since ... just gets stuck at that very 1st galaxy s3 logo.
tried flashing the rom again ...odin fails saying no pit file found .... ditto flashing a kernal ...
looked around net and tried flashing a pit file ... odin log says > Re-Partition operation failed ....
anybody been able to fix something like this....? i have a few pit files i've found ..none seem to work.
are they rom specific ?
sun-drop said:
guys, my phone has been FINE for ages on I9300XXBLG8 ..then on friday while charging off my laptop ..i pull the plug and boom, it force restarts.
and has been doing so ever since ... just gets stuck at that very 1st galaxy s3 logo.
tried flashing the rom again ...odin fails saying no pit file found .... ditto flashing a kernal ...
looked around net and tried flashing a pit file ... odin log says > Re-Partition operation failed ....
anybody been able to fix something like this....? i have a few pit files i've found ..none seem to work.
are they rom specific ?
Click to expand...
Click to collapse
Why are you trying to repartition your phone..PIT-Partition Information Table..is used for partitioning the flash memory of your device.. flash the firmware as PDA with repartition checked off..
Sent from my GT-I9300 using xda app-developers app
zoot1 said:
Why are you trying to repartition your phone..PIT-Partition Information Table..is used for partitioning the flash memory of your device.. flash the firmware as PDA with repartition checked off..
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
because trying to flash the normal way just gets me a "no pit file" error in odin.
and i can't get to recover ...
ok sorta progress .. trying to flash CWM recovery via odin3 1.85 gets me a progress bar at least ...but it's hung ... but thats the first progress bar ive seen on my phone afrter two days of trying ... might power off and see whats happens ..
nope...nand write fail :/
how is the phone now? still not working?
So what is the status now? your phone recovered or not?
I have the same problem
I have the same problem
What I already tried
I have it on another usb port (nothing):crying:
And other PC :crying:
And others type ODIN :crying:
And 5 other pit files :crying:
And other firmware Roms from XDA And Sammobile :crying:
It remains no pit file partitioning or no re-partitioning :crying:
Taxi341 said:
I have the same problem
What I already tried
I have it on another usb port (nothing):crying:
And other PC :crying:
And others type ODIN :crying:
And 5 other pit files :crying:
And other firmware Roms from XDA And Sammobile :crying:
It remains no pit file partitioning or no re-partitioning :crying:
Click to expand...
Click to collapse
Exactly same here!! Died today whilst charging - tried everything the OP did but nothing works.:crying:
Calpol said:
Exactly same here!! Died today whilst charging - tried everything the OP did but nothing works.:crying:
Click to expand...
Click to collapse
I'm a noob of android, but i can try this: http://forum.xda-developers.com/showthread.php?t=1840030
??i've got a stock galaxy s3, can only work in download mode :crying:
try this set but follow the screenshots carefully. If not... join the club, search for "sudden death" thread in General section, then, service can be your only option.
http://forum.xda-developers.com/showthread.php?p=31827683
i9.0.1.3k galaxy imperator
I've tried your rescue firmwere but odin return me always the same error, what can i do?only samsung service i think... :crying:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello Guys
I've download CWM img file for my S3 from this clockworkmod website.
but noticed that I only have to flash this file to my S3 (can't use by recovery mode).:crying:
please can you guys show me how to convert this img to zip file so I can use it like what i have in my S2 (like this recovery-clockwork-4.0.1.5-galaxys2_2.zip)
Appreciate your reply.
wisammeesh said:
Hello Guys
I've download CWM img file for my S3 from this clockworkmod website.
but noticed that I only have to flash this file to my S3 (can't use by recovery mode).:crying:
please can you guys show me how to convert this img to zip file so I can use it like what i have in my S2 (like this recovery-clockwork-4.0.1.5-galaxys2_2.zip)
Appreciate your reply.
Click to expand...
Click to collapse
if you are using gt-19300 (international variant) try this or go here where you get official cwm for s3 international
MoonBlade said:
if you are using gt-19300 (international variant) try this or go here where you get official cwm for s3 international
Click to expand...
Click to collapse
Many thanks for reply
I tried all of these CWM in the thread you sent, but stocked in the (signature verification failed) error, please help.
wisammeesh said:
Many thanks for reply
I tried all of these CWM in the thread you sent, but stocked in the (signature verification failed) error, please help.
Click to expand...
Click to collapse
in recovery goto install zip menu and then toggle the signature verification to disabled. then flash.
MoonBlade said:
in recovery goto install zip menu and then toggle the signature verification to disabled. then flash.
Click to expand...
Click to collapse
But I'm using the stock recovery mode & and there is no toggle option??
when I load any zip file (root or the CWM) from the stock recovery the installation aborted due to signature verification failed.
wisammeesh said:
But I'm using the stock recovery mode & and there is no toggle option??
when I load any zip file (root or the CWM) from the stock recovery the installation aborted due to signature verification failed.
Click to expand...
Click to collapse
ok how about using the cwm.tar and flashing via odin ?
MoonBlade said:
ok how about using the cwm.tar and flashing via odin ?
Click to expand...
Click to collapse
Ok can you please show how to do it, coz I also try this method step by step but it wont success.
every time I boot in recovery mode the old stock rc loaded instead of CWM, please help.
I used Odin 3.04 & touch CWM last version tar file.
wisammeesh said:
Ok can you please show how to do it, coz I also try this method step by step but it wont success.
every time I boot in recovery mode the old stock rc loaded instead of CWM, please help.
I used Odin 3.04 & touch CWM last version tar file.
Click to expand...
Click to collapse
For flashing via Odin DO NOT BOOT INTO RECOVERY MODE. Boot into DOWNLOAD MODE. here is a description below.
The Samsung drivers must be properly installed and phone recognized prior to flashing with odin.
1. Open the "Odin307" folder and right click on "Odin3 v3.07.exe" and choose run as
administrator. Odin will open.
2. place your phone into download mode. Turn off phone - press and hold volume down, home
button and power button at the same time. When you see the warning push the volume up
button to continue.
3. Plug your usb cord to your phone and computer and wait until you see any number and com
in the com
4. Check the PDA block and browse to the tar file you would like to flash.
5. that settings are correct for what you are doing
When all this is setup Odin should look like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
6. If everything looks like the picture, click on the start button in Odin.
Please do not mess iwth the other options in Odin.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Description:
Odin is the ROM Flashing Tool for SAMSUNG smartphones. ROM files flashable with Odin come with .tar extension.
Most of the ROMs you are going to flash with Odin are the official stock Samsung ROMs (or leaked stock ROMs). Custom ROMs are rerely flashable by Odin because they come with .zip extension that Odin does not recognize (it recognizes .tar files).
Custom kernels, however, are sometimes provided in .tar format by their developers (e.g. CF-Root kernels), so that they can be flashed by Odin. When your phone is new and running official firmware you most often cannot flash a custom ROM to it because a Samsung phone often requires a custom recovery and root rights that are included in a custom kernel to be able to flash custom ROMs. That's why Odin often comes in handy in rooting and flashing a custom firmware to your phone because you (often) can flash a custom kernel with it that already includes root and custom recovery and enables you to flash custom firmware (custom ROMs). I use the word "often" very frequently in the previous sentence because every Samsung smartphone is different and requires various procedures for rooting it and flashing custom ROMs (see the section about using Odin below).
If it comes to stock ROMs, the best source of stock (official) Samsung ROM files is located at this excellent website: SamMobile.com/firmwares (link). It requires registration (it's free) and I encourage you to set up an account there because you will most likely use this site several times during your stay at XDA. You will most likely come across 1 .tar or 3 .tar file ROMs there, flashable by Odin. Refer to the Odin flashing guide below for more info.
Below in this thread you can download Odin v3.09, v3.07, v3.06, v3.04, v1.85, v1.83 and all important versions of Odin Multi Downloader.
However, bear in mind that not every Samsung smartphone can be flashed using any Odin version. In fact, for every Samsung smartphone there's a specific Odin version compatible with it. Please refer to the tables below to learn which Odin version is compatible with your phone!
To use Odin with ANY Samsung phone you first need to properly install latest Samsung USB Drivers for Mobile Phones. You can download the drivers in this thread (link). They work for all Samsung smartphones. In that thread there is a full guide on installing the drivers on Win 8/7/Vista/XP x86 & x64.
Click to expand...
Click to collapse
Download:
Code:
https://www.sendspace.com/file/bub5f3
http://www51.zippyshare.com/v/4KvmJlOM/file.html
Support to all devices
Yes.
Samsung Only
Hi John, thanks for the info. Where are the table below you mention? i am using note 3 SM-N900, which odin should i use?
The one posted above in the 1st post should work fine with your phone
ompid said:
Hi John, thanks for the info. Where are the table below you mention? i am using note 3 SM-N900, which odin should i use?
Click to expand...
Click to collapse
You can use odin 3.09 version, I highly recommended to get more info and the download links via following links.
http://forum.xda-developers.com/gal...08-2013-odin-3-09-odin-1-85-versions-t2189539
http://www.samsungodindownload.com
Thanks :good: :good:
Odin3 v3.12.3
Update: Download Odin3 v3.12.3 – Latest Version - odin3download.com/download-odin3-v3-12-3.html
Can I flash without pc?
Isn't there way to flash recovery without pc cuz.. I forgot to restore boot image in twrp and now my phone is now in downloading mode .