Related
Is there a possible way that someone can send me a recovery file for cwm that I can flash from an external SD card? My phone wasn't mounting to USB storage so I formatted it, forgetting that my recovery file was on the internal SD card.... and when I tried to reboot my phone it just stays at the blue SAMSUNG logo. Now I cant try to recover the phone and I also can't flash through odin because my phone isnt recognized by the computer whatsoever. SOMEONE HELP.
BryceBrutalityX said:
Is there a possible way that someone can send me a recovery file for cwm that I can flash from an external SD card? My phone wasn't mounting to USB storage so I formatted it, forgetting that my recovery file was on the internal SD card.... and when I tried to reboot my phone it just stays at the blue SAMSUNG logo. Now I cant try to recover the phone and I also can't flash through odin because my phone isnt recognized by the computer whatsoever. SOMEONE HELP.
Click to expand...
Click to collapse
try to uninstall your drivers and reinstall, check my links on my signature links for the Gnote page i have driver listed there
-there are odin package listed on the Gnote page
-try diff usb port on you pc
-try diff cable
-try diff computer if possible
you will need to put your phone in download mode, holding down power and vol down button...
http://forum.xda-developers.com/showpost.php?p=28040353&postcount=1
And don't forget we have a 1 click rom installer if you get your pc drivers installed.
rangercaptain said:
And don't forget we have a 1 click rom installer if you get your pc drivers installed.
Click to expand...
Click to collapse
i miss that....whatcha mean sir...
rangercaptain said:
And don't forget we have a 1 click rom installer if you get your pc drivers installed.
Click to expand...
Click to collapse
edit
XDA is no longer worth my time.
bigjoe2675 said:
try to uninstall your drivers and reinstall, check my links on my signature links for the Gnote page i have driver listed there
-there are odin package listed on the Gnote page
-try diff usb port on you pc
-try diff cable
-try diff computer if possible
you will need to put your phone in download mode, holding down power and vol down button...
http://forum.xda-developers.com/showpost.php?p=28040353&postcount=1
Click to expand...
Click to collapse
I know that I have to get it into download and use ODIN to flash the firmware on there o fix it, but the problem is that computer refuses to pick up my device while its in download mode, and yes I have reinstalled drivers. I have also tried different cables and different ports on my computer. Nothing seems to work.
same problem
TimOster said:
IF when you go into download mode and plug in USB (w/Kies running), it tries to connect....Use Tools/Firmware upgrade and Initialization
That pretty much wipes everything and does a fresh install....of the current ROM which is now ICS.
Click to expand...
Click to collapse
i am trying this method sir, but its asking for serial no and model, i refered from back of my battery and i enterd nut it said to refer it again:crying:
has to be all caps
Mine did the same thing... I called Samsung and walked me threw a hard reset. Check my last post in the general section and the steps are in my post. Only bad thing is u loose everything but u get our phone back....
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
so i formated my phone for some reason and all i see is black screen
and i cant get to the bootloader but i can get to download mode...
but my computer and odin cant recognize my phone
i updated all the drivers i need and still cant recognize
is there a way that i can fix this?
can i install the cwm to the sd card and how?
10x for the help!
sawserlauz48 said:
so i formated my phone for some reason and all i see is black screen
and i cant get to the bootloader but i can get to download mode...
but my computer and odin cant recognize my phone
i updated all the drivers i need and still cant recognize
is there a way that i can fix this?
can i install the cwm to the sd card and how?
10x for the help!
Click to expand...
Click to collapse
bootloader?
Can you still get to recovery mode?
You can try another cable and another USB port
reply
sawserlauz48 said:
so i formated my phone for some reason and all i see is black screen
and i cant get to the bootloader but i can get to download mode...
but my computer and odin cant recognize my phone
i updated all the drivers i need and still cant recognize
is there a way that i can fix this?
can i install the cwm to the sd card and how?
10x for the help!
Click to expand...
Click to collapse
Try another computer, with a good known working cable
Try another computer, with a good known working cable
Click to expand...
Click to collapse
i tried another cable and computer didnt work
bootloader?
Can you still get to recovery mode?
You can try another cable and another USB port
Click to expand...
Click to collapse
that's the problem i can't get to the recovery mode
also tried another usb port didnt work
I Tried using flashtool to flash stock rom from sony for my phone Sony Xperia U but it doesn't work , with normal user (no admin perm) It cannot detect that phone is in flashboot mode but with admin it detects but still nothing just "ended flash session"
Also i instaled driver propertly on windows 8 x64
I was so stupid i forgot to put zip on sdcard , anyone help? BUMP?
duxishere said:
I Tried using flashtool to flash stock rom from sony for my phone Sony Xperia U but it doesn't work , with normal user (no admin perm) It cannot detect that phone is in flashboot mode but with admin it detects but still nothing just "ended flash session"
Also i instaled driver propertly on windows 8 x64
Click to expand...
Click to collapse
Can't you put it on external SD card?
How come fastboot not detected, have you used it on that PC before?
ChikeD said:
Can't you put it on external SD card?
How come fastboot not detected, have you used it on that PC before?
Click to expand...
Click to collapse
Ah it was problem with my front USB port , for some reason it doesn't work ,works only on rear USB port i was searching whole day until i tried rear USB port
EDIT: Also for some reason CWM Recovery 6.0.3.3 cannot mount USB storage so i had to flash stock sony rom via flashmode using ftf file , and now i am running SlimBean with SlidingXU kernel , works perfect , calls working, WiFi working
duxishere said:
Ah it was problem with my front USB port , for some reason it doesn't work ,works only on rear USB port i was searching whole day until i tried rear USB port
EDIT: Also for some reason CWM Recovery 6.0.3.3 cannot mount USB storage so i had to flash stock sony rom via flashmode using ftf file , and now i am running SlimBean with SlidingXU kernel , works perfect , calls working, WiFi working
Click to expand...
Click to collapse
Is it a USB 3 port, AFAIK those don't work with fastboot/flash mode.
Yes it's a big problem most of recoveries do not have working USB storage and adb
ChikeD said:
Is it a USB 3 port, AFAIK those don't work with fastboot/flash mode.
Yes it's a big problem most of recoveries do not have working USB storage and adb
Click to expand...
Click to collapse
Well it is 2.0 , everything else works on front , even USB Storage on phone but flashing don't , on rear USB ports all works..
how to install stock rom.
duxishere said:
Ah it was problem with my front USB port , for some reason it doesn't work ,works only on rear USB port i was searching whole day until i tried rear USB port
EDIT: Also for some reason CWM Recovery 6.0.3.3 cannot mount USB storage so i had to flash stock sony rom via flashmode using ftf file , and now i am running SlimBean with SlidingXU kernel , works perfect , calls working, WiFi working
Click to expand...
Click to collapse
I'm stuck in clockworkmod recovery. What should i do now. Please help me.
manmathb said:
I'm stuck in clockworkmod recovery. What should i do now. Please help me.
Click to expand...
Click to collapse
No other choice man you have to flash stock from a different pc such as your friends or any thing.
there have been complications with windows 8 i've heard but not sure.....
hello guys,
i have sony xperia u having STE 4.4.4 kitkat. but becouse my phone not recognise in any pc, i flash stock rom via TWRP recovery. so now problem is my XPERIA U is not recognize in any pc via flashtool so i can't flash ftf or any other rom. so plz anyone have any solution to fix this problem??
Try turning it off, then holding down the volume down (or up?) key when you plug it into the computer, the LED should go purple or green or something. Then see if it shows up
jebediaah said:
Try turning it off, then holding down the volume down (or up?) key when you plug it into the computer, the LED should go purple or green or something. Then see if it shows up
Click to expand...
Click to collapse
i traied it so many time but laptop does not recognize my phone as xperia u so it do not connect in ither flashboot or fastboot mode. and i installed all drivers which are neccessory. :
Have you tried installing drivers with flashtool?
Have you got access to a linux distro? because thats how I was able to connect my bricked xperia go in fastboot mode.
Maybe try unistalling your drivers and reinstalling them.
ok you need to tell me what os are you using and what rom did you try to flash does your phone light up when you connect it in fastboot if so its a drivers problem you should see if drivers are installed correctly if its correct then change your cable and the usb hub and try again Thanking me is always better than saying thanx
jebediaah said:
Have you tried installing drivers with flashtool?
Have you got access to a linux distro? because thats how I was able to connect my bricked xperia go in fastboot mode.
Maybe try unistalling your drivers and reinstalling them.
Click to expand...
Click to collapse
ya i have tried installing drivers via flashtool and i also changed charging socket because it seems like some hardware problem but problem is still existed....and i dont know about linux much so can you give me some brief???/
THANK YOU
MaDTH Bistata said:
ok you need to tell me what os are you using and what rom did you try to flash does your phone light up when you connect it in fastboot if so its a drivers problem you should see if drivers are installed correctly if its correct then change your cable and the usb hub and try again Thanking me is always better than saying thanx
Click to expand...
Click to collapse
i was using xperia STE 4.4.4 kitkat. and then i flash Stock JB 4.1.2. but i dont have rom in my SD card and it is also not connected to flashtool ( every time i connect to pc its show the massage of Device is not recognise )so i cant revert it back to STE 4.4.4 so now what shold i do????
ok if your twrp is working do the following
1-download a new rom
2-see mount usb and check it
3-now your phone will connect storage
4-do the steps to install the rom
5-ALLWAYS DO A NANDROID backup after it
if twrp is not working
does your phone work with the stock rom??? if so it will be so easy just root it (if its unrooted) and install cwm or twrp
hope that i helped
9228
MaDTH Bistata said:
ok if your twrp is working do the following
1-download a new rom
2-see mount usb and check it
3-now your phone will connect storage
4-do the steps to install the rom
5-ALLWAYS DO A NANDROID backup after it
if twrp is not working
does your phone work with the stock rom??? if so it will be so easy just root it (if its unrooted) and install cwm or twrp
hope that i helped
Click to expand...
Click to collapse
My phone is not connecting to pc. It's shows device not recognize. And even i install all the drivers for xperia u and fastboot/flashboot both. so n now i think it's may be a hardware problem. and i also showed it to mabile repair technician but he even can't do anything.:crying::crying::crying::crying:
dont worry
D3ViL's AnG3L said:
My phone is not connecting to pc. It's shows device not recognize. And even i install all the drivers for xperia u and fastboot/flashboot both. so n now i think it's may be a hardware problem. and i also showed it to mabile repair technician but he even can't do anything.:crying::crying::crying::crying:
Click to expand...
Click to collapse
dont worry man we will fix it i promise
let me do some research and i will get you the solution man
try it
D3ViL's AnG3L said:
My phone is not connecting to pc. It's shows device not recognize. And even i install all the drivers for xperia u and fastboot/flashboot both. so n now i think it's may be a hardware problem. and i also showed it to mabile repair technician but he even can't do anything.:crying::crying::crying::crying:
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1849170 check this and try it if you have any problems then contact me
data cable
D3ViL's AnG3L said:
My phone is not connecting to pc. It's shows device not recognize. And even i install all the drivers for xperia u and fastboot/flashboot both. so n now i think it's may be a hardware problem. and i also showed it to mabile repair technician but he even can't do anything.:crying::crying::crying::crying:
Click to expand...
Click to collapse
Even your data cable can cause these issues try another data cable.
make sure it is an standard one!:good:
MaDTH Bistata said:
dont worry man we will fix it i promise
let me do some research and i will get you the solution man
Click to expand...
Click to collapse
Thanxxx buddy....
Reply soon
The_Ace said:
Even your data cable can cause these issues try another data cable.
make sure it is an standard one!:good:
Click to expand...
Click to collapse
ya i tried it too
but no positive result.....
I have same problem which isnot sorted out yet
HEllow guys..
the simple solution that my device was needed was one soldering at charger connecting pin. i don't know at where that person did that soldering but now its recognize in every pc.
and thank a lot for your help in troubleshoot this problem
Hi all,
by cons for several weeks I've a concern with my redmi Note 2 and I can't find the answer to my problem on the forum or even the Internet.
Since the last update 7.2.2 (global) I have the Recovery MIUI who crushed the TWRP. I changed to test 6.3.17. The update to the .24 went wrong and I don't know why. Since the phone is bootloop. But the problem is that my phone is not recognized by any PC. I tried several PCs, several cables, several drivers, with or without the Fastboot, unable to connect. Therefore impossible to load a new version. I don't think it's material problem because the phone recharge well with a cable to the socket.
Is there another handling or debug decision to restart the phone? I'm in France for information.
thank you in advance if you can point me to a solution !
Hope someone can help me.
Manu
Can the phone boot to miui recovery? If so, you should be able to use miui recovery to flash TWRP (I think you will need one with a signed install zip). You only need to take out the external SD, put it in one of those cheap USB card readers, copy your recovery and ROM to the SD, put it back in the phone, flash TWRP with miui recovery, and then flash the ROM with TWRP (I am assuming that miui recovery can install things from the external SD - if not, then none of this will work).
Hi Bro,
Yes it boot in MIUI recovery but impossible to get access to the SD Card...
I tried to put the file on the SD card but you can't choose the path, I think the recovery will look only in the internal memory ... And as I can't access the internal memory..
I despair !!
Thanks o lot for your help
DarthJabba9 said:
Can the phone boot to miui recovery? If so, you should be able to use miui recovery to flash TWRP (I think you will need one with a signed install zip). You only need to take out the external SD, put it in one of those cheap USB card readers, copy your recovery and ROM to the SD, put it back in the phone, flash TWRP with miui recovery, and then flash the ROM with TWRP (I am assuming that miui recovery can install things from the external SD - if not, then none of this will work).
Click to expand...
Click to collapse
manu33xtro said:
Hi Bro,
Yes it boot in MIUI recovery but impossible to get access to the SD Card...
I tried to put the file on the SD card but you can't choose the path, I think the recovery will look only in the internal memory ... And as I can't access the internal memory..
I despair !!
Thanks o lot for your help
Click to expand...
Click to collapse
Ok - but have you tried the Mediatek SP Flash Tool?
Of course yes but the real problem is that the phone is not recognized by the PC and therefore can't load anything ...
Even changing drivers or cables or PC, nothing to do.
DarthJabba9 said:
Ok - but have you tried the Mediatek SP Flash Tool?
Click to expand...
Click to collapse
manu33xtro said:
Of course yes but the real problem is that the phone is not recognized by the PC and therefore can't load anything ...
Even changing drivers or cables or PC, nothing to do.
Click to expand...
Click to collapse
So, when the battery is removed, and you connect the USB cable, the phone is not even vibrating (and making that weird sound) every couple of seconds or so?
Yes you're right : every 10s the phone vibrate...
DarthJabba9 said:
So, when the battery is removed, and you connect the USB cable, the phone is not even vibrating (and making that weird sound) every couple of seconds or so?
Click to expand...
Click to collapse
manu33xtro said:
Yes you're right : every 10s the phone vibrate...
Click to expand...
Click to collapse
Well, then it is very strange that you can't use the SP Flash Tool. If the phone vibrates, then the device is recognised, and you should be able to flash anything you want with the SP Flash Tool! How exactly were you trying to use the Flash Tool?
I tried so many solutions I really don't know exactly how I used the software.
I will again try everything.
But against any changes when I look in the USB settings of the PC, the phone doesn't appear.
I try again just now, thank you for your help.
DarthJabba9 said:
Well, then it is very strange that you can't use the SP Flash Tool. If the phone vibrates, then the device is recognised, and you should be able to flash anything you want with the SP Flash Tool! How exactly were you trying to use the Flash Tool?
Click to expand...
Click to collapse
manu33xtro said:
I tried so many solutions I really don't know exactly how I used the software.
I will again try everything.
But against any changes when I look in the USB settings of the PC, the phone doesn't appear.
I try again just now, thank you for your help.
Click to expand...
Click to collapse
With the SP Flash Tool, all you need is the correct "scatter" file (MT6795_Android_scatter.txt), and the image(s) that you want to flash. If the phone is vibrating, then the SP Flash Tool should be able to connect to it when you click "Download". Just make sure that you first untick everything that you do NOT want to flash. I would try flashing the boot image (boot.img) first. If that succeeds, then try the TWRP recovery image.
Ok. I'm going to try again with "http://en.miui.com/forum.php?mod=viewthread&tid=196175&highlight=sp%2Btool%2Bflash%2Bredmi%2Bnote%2B2"
DarthJabba9 said:
With the SP Flash Tool, all you need is the correct "scatter" file (MT6795_Android_scatter.txt), and the image(s) that you want to flash. If the phone is vibrating, then the SP Flash Tool should be able to connect to it when you click "Download". Just make sure that you first untick everything that you do NOT want to flash. I would try flashing the boot image (boot.img) first. If that succeeds, then try the TWRP recovery image.
Click to expand...
Click to collapse
Well... Install again drivers MTK but nothing... The phone vibrates well but the PC still doesn't see ... It's late now, I look again tomorrow night.
Thanks again.
manu33xtro said:
Ok. I'm going to try again with "http://en.miui.com/forum.php?mod=viewthread&tid=196175&highlight=sp%2Btool%2Bflash%2Bredmi%2Bnote%2B2"
Click to expand...
Click to collapse
manu33xtro said:
Well... Install again drivers MTK but nothing... The phone vibrates well but the PC still doesn't see ... It's late now, I look again tomorrow night.
Thanks again.
Click to expand...
Click to collapse
Perhaps you might want to describe what exactly happens when do you what exactly?
Hi,
Ok that's what I do with an old PC with Win XP.
- install media Tek USB VCOM drivers for Win XP -> installation complete
- launch SP Flash Tool with administrator rights)
- use scatter file from Redmi Note 2 rom
- use download agent "MTK_AllInOne_DA.bin"
- press download button
- connect phone with UCB cable and waiting... and waiting...
- and I can't see it in device manager !
No way again !
I will try again...
DarthJabba9 said:
Perhaps you might want to describe what exactly happens when do you what exactly?
Click to expand...
Click to collapse
manu33xtro said:
Hi,
Ok that's what I do with an old PC with Win XP.
- install media Tek USB VCOM drivers for Win XP -> installation complete
- launch SP Flash Tool with administrator rights)
- use scatter file from Redmi Note 2 rom
- use download agent "MTK_AllInOne_DA.bin"
- press download button
- connect phone with UCB cable and waiting... and waiting...
- and I can't see it in device manager !
No way again !
I will try again...
Click to expand...
Click to collapse
Strange! I am assuming that when you connect the phone with the USB cable, the battery has been removed from the phone? If so, then it should work.
Perhaps you should try first connecting the phone, and then waiting until it has vibrated once or twice, before clicking the "Download" button?
Yes I removed battery before connect the phone to PC. I tried also with battery and nothing changed.
I even changed the cable to be sure.
Which seems to me most strange is that I see nothing in the device manager, as if the phone wasn't connected. Whatever the installed driver is the same result. I think it should at least have the phone on the COM or USB port ...
I will try again this night to be sure with all steps one by one. And I will also try with ACER tablet I and runs Android 5.1. Maybe it will be recognized.
Otherwise I also tried to pass a Linux PC as a last resort.
Thanks again for your help.
DarthJabba9 said:
Strange! I am assuming that when you connect the phone with the USB cable, the battery has been removed from the phone? If so, then it should work.
Perhaps you should try first connecting the phone, and then waiting until it has vibrated once or twice, before clicking the "Download" button?
Click to expand...
Click to collapse
manu33xtro said:
Yes I removed battery before connect the phone to PC. I tried also with battery and nothing changed.
I even changed the cable to be sure.
Which seems to me most strange is that I see nothing in the device manager, as if the phone wasn't connected. Whatever the installed driver is the same result. I think it should at least have the phone on the COM or USB port ...
Click to expand...
Click to collapse
Yes, it should. The fact that the phone vibrates when connected indicates that the PC and phone are communicating - but it may well be that a low-level driver in the phone has been overwritten (which may mean that this is a lost cause). A final idea - can miui recovery access usbotg?
Hum good question. In fact I don't know. I'll ask the MIUI forum.
I got home late from work so I don't do tests tonight, I'd see it all tomorrow including the connection with my tablet ...
Thanks
DarthJabba9 said:
Yes, it should. The fact that the phone vibrates when connected indicates that the PC and phone are communicating - but it may well be that a low-level driver in the phone has been overwritten (which may mean that this is a lost cause). A final idea - can miui recovery access usbotg?
Click to expand...
Click to collapse
Hi,
I tried to connect with an Acer Tablet with Android 5.1.1 but nothing appends...
I tried also with a Linux PC (Debian) and if I can see a Samsung A3 phone dirrectly, no way for my Redmi Note 2...
There really I despair : I think I can't access any of the phone. Can't do anything !
If you have any other solution but you help me a lot already, and thanks for that.
Can be a micro crack on the USB plug into the phone if it's not a software problem ... Let's go for it apart and look at this ...
Thanks again bro.
Manu
DarthJabba9 said:
Yes, it should. The fact that the phone vibrates when connected indicates that the PC and phone are communicating - but it may well be that a low-level driver in the phone has been overwritten (which may mean that this is a lost cause). A final idea - can miui recovery access usbotg?
Click to expand...
Click to collapse
manu33xtro said:
Hi,
I tried to connect with an Acer Tablet with Android 5.1.1 but nothing appends...
I tried also with a Linux PC (Debian) and if I can see a Samsung A3 phone dirrectly, no way for my Redmi Note 2...
There really I despair : I think I can't access any of the phone. Can't do anything !
If you have any other solution but you help me a lot already, and thanks for that.
Can be a micro crack on the USB plug into the phone if it's not a software problem ... Let's go for it apart and look at this ...
Thanks again bro.
Manu
Click to expand...
Click to collapse
I don't think it is a crack on the USB plug. It seems to me to be a low-level driver problem - ie, the drivers on the phone that are active when the phone is not (fully) booted up. I don't have the right terminology for these drivers, but they are possibly part of the bootloader. If that is the problem, then I don't know how you would solve this problem.