Installation:
Download the ZIP
ZIP on SD card copy
If necessary backup make
In CWM recovery boot
wipe data / factory reset
wipe cache partition
advanced / wipe Dalvik cache
mounts and storage / format system + cache
mounts and storage / mount system mount data +
install zip from sdcard
choose zip from sdcard
finished
during the first boot it takes a while until the ROM starts
Status:Stable
Rom Link: https://www.androidfilehost.com/?w=files&flid=13821
Recovery: 6.5.0 https://www.androidfilehost.com/?w=files&flid=13838
Credits:
No Name
Dazzoo
Huawei Y201 ROM
Thanks !!! Downloading it now !!! I will try it today
Hi there !!! What Gapps version should i use? I have checked all the mini, lite and full ( which does not work ) version that are supposed to work with 4.4.4 but only few apps appear and i have tried a dozen time to flash them over and over with no result so far No Play Store and Gmail opens and stops ....
original CM 11 Thread in German Forum from developer No|Name :
http://www.android-hilfe.de/root-cu...o/532676-rom-4-4-4-cyanogenmod-11-kitkat.html
there youll find all links as well. last update was 18 Sep 2014
Please Repair Link !
Related
Can someone give me FULL instructions for flashing this coming from Miui AOSP, without Odin? From flashing the Rom to installing the google apps (dont know how to)... I havent flashed a WHILE. Thanks guys
im assuming you have rom manager installed for this and the rom you want installed (trigger redux) is at the root of your micro sd .... once you have those done follow the steps
1. in rom manager hit flash clockworkmod recovery then pick vibrantmtd then pick 3.x.x because we are on gingerbread
2. hit install rom from sd card and find the rom's zip folder and select it afterwords something else will pop up with 3 0ptions, put a check on all 3 (backup rom, wipe data and cache and dalvik cache) then hit install
BY SELECTING WIPE DATA AND CACHE YOUR APPS AND STUFF WILL BE GONE WHEN THE NEW ROM BOOTS UP SO MAKE SURE EVERYTHING YOU WANT IS BACKED UP
IF WIPE DATA AND CACHE IS NOT SELECTED THERE IS ONLY A SLIGHT CHANCE THAT YOU WON'T HAVE TO use ODIN!!
http://www.appbrain.com/app/app-backup-reinstall/tw.nicky.AppBackupReinstall
this link has an app that backs up all your apps to your sd card or you can use titanium back up to back up everything
I went from Muiu to redux and what I did is this: (might be overkill but its what I did and everything worked great)
1. Reboot into recovery
2. clear data/factor reset
3. mounts and storage > format system, format data, format cache
4. install zip from sd card > trigger redux
5. install zip from sd card > gapps
6. advanced > wipe dalvic cache, fix permissions
7. reboot
8. let rom boot up and sit for 10 mins and reboot
9. enjoy
That is the correct way ...Guy above ...
Sent from my GT-I9000 using XDA App
I have a plenty of force close problem with almost all of my installed apps, the initial apps from this ROM won't have this problem.
May I know what is the problem? I believe I have correct partition my SD Card and flash the ROM with correct steps...have tried to flash it many many times dy...
Information:
device : bravo(desire) S-OFF
sd card : Sandisk 8GB Class-4
hboot : CM7 r2
recovery : 4EXT Recovery Touch 1.0.0.3 Beta 7
radio : 5.17.05.23
rom : Runnymede AIO 5.0 Special Edition
Partition my SD Card via 4EXT Recovery:
1) tools -> partition sd card -> remove all partitions and start from scratch
2) choose "1024MB" for 1st partition
3) choose "skip" for 2nd partition
4) choose "skip" for swap partition
5) choose "EXT4"
6) check partition aligment
Rom Installation:
Choosen AD2SDX
Wipe:
1) wipe data/factory reset
2) wipe cache
3) wipe cache + dalvik
4) wipe dalvik cache
5) format all partitions (except sdcard)
Can please help help me =.= I like this ROM very much
anyone help help me ?
Try without a2sd. It causes a lot of fc issues
Sent from my phone to your eyes
you mean choose APP2SD instead of AD2SDX?
if use APP2SD,the storage is very low o...
my force close happen after few hours use, have to reboot again when everytime force close...
by the way u using APP2SD type?
No I don't. I don't even own that device. Just giving you some general tips
Sent from my phone to your eyes
I had same problem, but what i did is that,
I used "MiniTool Partition Wizard Home Edition" it is free working on windows. I used it to
1- remove all the partition from my sdcard, then
2- do a partition using 4EXT as a (primary) with 1250MB. and move it the back of the sdcard. (you will know that when you use the MiniTool program).
3- do a partition using Fat32 as a (primary) with the rest of space, you may note extra blank area usually 8MB, that fine just forget about it .
4- upload all the roms you like to the Fat32 part of your sdcard.
5- Wipe:
1) wipe data/factory reset
2) wipe cache
3) wipe cache + dalvik
4) wipe dalvik cache
5) format all partitions (data, system ...etc) (except sdcard).
then install your ROM.
It works with me from the first time and I didn't get any error.
It you get any error after that. take the battery out for few minuses and repeat the wipe step, 2 times for every thing before you install the ROM.
Good Luck and Greeting from Saudi Arabia ..
Hi mates i made a flashable.zip for CWM recovery based of the ISR/ISRAEL V20A firmware
It has all the same things of the KDZ file i just extracted a rooted it.
INSTALLATION:
MAKE A NANDROID BACKUP OF YOUR CURRENT ROM AND APPS,RECOVERY,TITANIUM BACKUP ETC
Go into CWM recovery
then go to :
Mounts and Storage
mount /data
mount /sdcard
mount /system
under that options select this ones:
format /cache
format /data
format /system
go back to the main menu
then wipe Cache partition
after that go to advanced and wipe dalvik cache
go back to main menu then
wipe data/factory reset
Install Rom from SDCARD
after installation its completed wipe cache and dalvik cache again
Restart the phone.
Go to superSU app
it will show a warning telling you that something its wrong with the SU access.
Reboot into CWM and flash the SuperSU providen by chainfire.
http://download.chainfire.eu/396/SuperSU/
Reboot the phone then superSU app should be gone from the app drawer,just reinstall it from google play and update the binaries via normal mode.
Reboot the phone again ,now you wil have complete root access
also dont forget to disable MLT from hidden menu,just dial:
3845#*714#
DONE :good:
DOWNLOAD:
https://mega.co.nz/#!rUwkEYDD!QIQlPGO9ctfazAQ_HhqTDmt0vkDy5VBsXTiFD7-ndWU
P.S. PLEASE DONT REUPLOAD THE ROM TO ANOTHER HOST BECAUSE I TAKE A COUNT OF THE DOWNLOADS,PLEASE,AND THANKS.
Have a nice day,evening,etc
Dont work the phone calls :/
MarcosJoeel said:
Dont work the phone calls :/
Click to expand...
Click to collapse
Flash this zip
http://forum.xda-developers.com/showpost.php?p=56661337&postcount=177
Hello friends
My Nubia Z7 runs on KitKat 4.4.2 ver V1.26 (stock rom) and it has the stock recovery, which is a limited one, it is able only to update the stock rom, but it cannot flash gapps, or other zip packages
I dag the net but it doesn't exist any custom recovery such as TWRP or CWM for this model, working with kitkat 4.4.2, only a Chinese TWRP version for Lollipop.
So after many days I found on Baidu a Chinese version of CWM which I wish to share.
You can download it from here:
https://we.tl/Cehp0LBOS7
If anyone could take the file and upload it on cloud for download, because the link will soon expire, please do it.
On a spanish site I found this;
RECOVERY MAIN MENU (ENGLISH TRANSLATION)
(1) Reboot System now
(2) Install ZIP from SD card
(3) Wipe data / factory reset
(4) Wipe Cache
(5) Backup and restore
(6) Mount / format
(7) Advanced Settings
(2) Sub-menu for Install Zip from SD card.
(2.1) Choose ZIP from SD card
(2.2) Last used ZIP
(2.3) Install Zip from Sideload allows you to flash a ZIP file via ADB from your computer with the command adb sideload
(2.4) Toggle signature verification
(2.5) Go Back
(3) No sub-menu for Wipe data / factory reset
(4) No sub-menu for Wipe cache
(5) Sub-menu for Backup and restore
(5.1) Backup to sdcard
(5.2) ????
(5.3) ????
(5.4) ????
(5.5) Clean up useless backup data
(5.6) Select default Backup format TAR, DUP, TAR+GZIP
(5.7) Go Back
(6) Sub-menu for Mount / Format
(6.1) Mount /system
(6.2) Mount /cache
(6.3) Mount /data
(6.4) Mount / auto
(6.5) Format /system
(6.6) Format /cache
(6.7) Format /data
(6.8) Format /boot
(6.9) Format / auto
(6.10) Format /data (include built in memory)
(6.11) Go Back
(7) Sub-menu for Advanced Settings
(7.1) Reboot Recovery
(7.2) Reboot Bootloader
(7.3) Power off device
(7.4) Wipe Dalvik-cache
(7.5) Perform error log
(7.6) Key test
(7.7) Display recovery log
(7.8) Go Back
______________________________
TheFrenchMan
Thanks TheFrenchMan.
I've uploaded the file to the MEGA cloud. Here is the link:
https://mega.nz/#!M5ljiCaa!fIraPXTxGJxQhVLtiyxw772Km3dJK2idZI9RplXAS_c
Please, someone have a link to download stock MIUI rom ? (fastboot version)
I have TWRP but I wiped system partition, so I haven't system to boot, and my tab don't stop to bootloop. Now I can't decrypt data when I boot to TWRP, so I can't mount storage partition for copy ROM file.
Thanks
EDIT: It's done
1. CANCEL WHEN TWRP ASK FOR PASSWORD
2. GOTO WIPE
3. SLIDE TO WIPE
4. BACK TO MAIN TWRP MENU
5. REBOOT TO RECOVERY AGAIN
Now I can mount storage partition without any encryption.
Here is the link:
http://www.miui.com/getrom-349.html
Or English version of webpage:
http://en.miui.com/forum.php?mod=viewthread&tid=3661957
Thanks !