[Q] I think i bricked my micromax a87 - Android Q&A, Help & Troubleshooting

i installed a custom rom namedhydroid xlr8 and was working great but as i entered into custom recovery for doing a factor data reset, it completed nut when it started to reboot, it started to show a white screen just after the logo and then logo... then white screen... then logo and it keeps on going... not even entering into CWM.. I think its bricked.. can anybody help??:crying::crying:

vishnunair said:
i installed a custom rom namedhydroid xlr8 and was working great but as i entered into custom recovery for doing a factor data reset, it completed nut when it started to reboot, it started to show a white screen just after the logo and then logo... then white screen... then logo and it keeps on going... not even entering into CWM.. I think its bricked.. can anybody help??:crying::crying:
Click to expand...
Click to collapse
I had a similiar device before I got my S3. Actually you are stuck at a bootloop. Most of the time it was caused by corrupt framework on my device. But I can't understand why you can't enter recovery. Are you sure your volume buttons are working fine?

GeekyDroid said:
I had a similiar device before I got my S3. Actually you are stuck at a bootloop. Most of the time it was caused by corrupt framework on my device. But I can't understand why you can't enter recovery. Are you sure your volume buttons are working fine?
Click to expand...
Click to collapse
I have a Micromax A87, Which I accidently bricked by
formatting boot in recovery. So it does not boot to recovery nor fastboot, no vibration.. Just a black screen .
I believe that qpst alone is the one detecting the phone, and .mbn & .hex files are required. Those files are different from the regular ones like boot.img, recovery.img etc. If anyone can guide me and help with
these files Id be grateful.

vishnunair said:
i installed a custom rom namedhydroid xlr8 and was working great but as i entered into custom recovery for doing a factor data reset, it completed nut when it started to reboot, it started to show a white screen just after the logo and then logo... then white screen... then logo and it keeps on going... not even entering into CWM.. I think its bricked.. can anybody help??:crying::crying:
Click to expand...
Click to collapse
---------- Post added at 06:44 PM ---------- Previous post was at 06:43 PM ----------
Yogesh1969 said:
I have a Micromax A87, Which I accidently bricked by
formatting boot in recovery. So it does not boot to recovery nor fastboot, no vibration.. Just a black screen .
I believe that qpst alone is the one detecting the phone, and .mbn & .hex files are required. Those files are different from the regular ones like boot.img, recovery.img etc. If anyone can guide me and help with
these files Id be grateful.
Click to expand...
Click to collapse
SP flash tool + stock backup = solution

Hovatek said:
---------- Post added at 06:44 PM ---------- Previous post was at 06:43 PM ----------
SP flash tool + stock backup = solution
Click to expand...
Click to collapse
Thanks,for the reply. But, this a qualcomm devive not a mtk device. therefore the problem.

Related

[Q] Galaxy S5830I Problem

Hello, I have a small problem with this phone. I'm trying to return it to the stock rom but here's my issue I can get into download mode and the recovery mode but when i use Odin v 1.85 or 3.09 it does not recognize the phone at all in the id:com can somebody please help? Tried to share a screen shot but it won't go through
Did you install Samsung drivers? And don't go into recovery mode, go into download mode only.
S5830i Stuck
indospot said:
Did you install Samsung drivers? And don't go into recovery mode, go into download mode only.
Click to expand...
Click to collapse
I've boot up my phone with ODIN3 v1.84......
Its already pass the boot up..but it stuck at recovery mode with message
"--Appling Multi-CSC--
Multi_CSC : there are common apks"
---------- Post added at 09:40 PM ---------- Previous post was at 09:32 PM ----------
zsddin said:
I've boot up my phone with ODIN3 v1.84......
Its already pass the boot up..but it stuck at recovery mode with message
"--Appling Multi-CSC--
Multi_CSC : there are common apks"
Click to expand...
Click to collapse
Need help on the issue.....
What To Do!!!

[BRICKED][XOLO][SOLUTION]XOLO Play Tab 7.0 / TW800 bricked after turning on BlueTooth

So you bought your new XOLO device and was excited to put data in it and when you turned on Bluetooth . It suddenly stopped responding and when you rebooted , you were stuck at bootloop of XOLO Logo ? (I know that feel ) Here I have got the solution :fingers-crossed: .
First of all let me clear some things -
1. Your XOLO Tab can be recovered but make sure you follow the instructions .
2. This is not a bug of XOLO but that of Android 4.1.1 , that is the problem . :good:
So lets solve this one ! :fingers-crossed:
1. Switch off the tablet , by long pressing the power key .
2. Turn on by pressing and holding VOLUME UP + VOLUME DOWN + POWER KEY .
*NOTE - Keep keys pressed until you see some options in upper - left corner.
3 . Navigate with volume keys and select Recovery and press the power button .
4 . Then you will see a dead android with a red exclamation mark .
{ IF YOU DONT SEE RECOVERY OPTIONS , JUST PRESS THE VOLUME AND POWER KEYS RANDOMLY ]
Then select "wipe data or factory reset " and then select "Yes" .
Wait for the process .
Aaaaaaaaand after reboot it starts up normal !!! :good: :fingers-crossed: :highfive: :laugh:
To prevent it from happening in future : :
Never turn on Bluetooth when it prompts you , always turn Bluetooth on manually by going to setting !! :fingers-crossed: Hope it helps
Xolo play tab 7.0 stock recovery.img needed!
Hey man!
I flashed a wrong cwm recovery and my recovery has been lost. I screwed up my tab as well and now its just stuck on XOLO boot loop and not booting in.
So the only thing I can do now is I have fastboot. No recovery and no boot.
I need your help!
Can you get the recovery.img of Xolo play tab 7.0 through flashify app or any other application in play store and send me the file 'recovery.img' to my mail?
So I can flash the recovery.img through fastboot and hopefully get the stock recovery back and from there I can flash the original stock ROM of this device and probably get my tablet back online.
Could you help please? Waiting for your reply.
I have a back up stock recovery
need recovery.img for xolo play tab7 (tw8oo)
notsooharsh said:
I have a back up stock recovery
Click to expand...
Click to collapse
can you please sent me the recovery file for xolo tw800
---------- Post added at 10:04 AM ---------- Previous post was at 10:01 AM ----------
shrihari123 said:
Hey man!
I flashed a wrong cwm recovery and my recovery has been lost. I screwed up my tab as well and now its just stuck on XOLO boot loop and not booting in.
So the only thing I can do now is I have fastboot. No recovery and no boot.
I need your help!
Can you get the recovery.img of Xolo play tab 7.0 through flashify app or any other application in play store and send me the file 'recovery.img' to my mail?
So I can flash the recovery.img through fastboot and hopefully get the stock recovery back and from there I can flash the original stock ROM of this device and probably get my tablet back online.
Could you help please? Waiting for your reply.
Click to expand...
Click to collapse
can you sent me xolo tw800 recovery.img if you have it now

Moto E unloked bootloader but unable to reboot.

Hi,
This is sriram. Recently my phone suddenly got restarted and hanged with Blue Moto M logo. I used to restart it several times but not able to get rid of the Blue Logo Screen. Then after some rigorous search I unlocked bootloader with Android SDK tools. Now I am getting White screen with "WARNING! BOOT LOADER UNLOCKED" and some description. Now I am not able to get rid of this screen. Is my phone hard bricked??? Is my phone useful or throw it in garbage?? please help me!!
are you stuck on that screen?
---------- Post added at 12:51 AM ---------- Previous post was at 12:48 AM ----------
and no your device is not hardbricked..
reboot to bootloader
flash twrp
flash cm13 or any other rom you'd like
OR
flash stock rom using fastboot..
there are tutorials for all these things... SEARCH

Bricked Ulefone Armor X5

Hey,
So i have an Ulefone Armor X5 and it froze during utilization, and now wont boot, its stuck on the Ulefone logo. I tried getting into the recovery, it did once, and i restarted it after that just to try and boot it normaly for the last time before doing a factory reset, and now when i boot into recovery, the screen is all black, no options, the only thing that is shows is: "Supported API: 3" at the bottom.
Any idea how i can revive the phone?
Bootloader is locked.
Maybe u need to install stock Rom.
You can download Guide, utility and Rom from official site on link below :
drive.google{dot}com/open?id=1c7W908yo36WWOZ4qu90zCidsbyswmJuh
I hope this will help you..
---------- Post added at 01:59 PM ---------- Previous post was at 01:22 PM ----------
xXSantyXx said:
Hey,
So i have an Ulefone Armor X5 and it froze during utilization, and now wont boot, its stuck on the Ulefone logo. I tried getting into the recovery, it did once, and i restarted it after that just to try and boot it normaly for the last time before doing a factory reset, and now when i boot into recovery, the screen is all black, no options, the only thing that is shows is: "Supported API: 3" at the bottom.
Any idea how i can revive the phone?
Bootloader is locked.
Click to expand...
Click to collapse
Flash with SP Multi Port,, maybe...
Your stuck in adb sideload mode, if you see API, I reckon, try sideloading the official zip....

Realme 6 Bootloop can't enter recovery mode and fastboot mode

help me, my realme 6 has bootloop and can't enter recovery mode and fastboot mode, what should I do? Plz help asap
Nappx said:
help me, my realme 6 has bootloop and can't enter recovery mode and fastboot mode, what should I do? Plz help asap
Click to expand...
Click to collapse
pls reply if any developer or person have a solution of this problem
Nappx said:
help me, my realme 6 has bootloop and can't enter recovery mode and fastboot mode, what should I do? Plz help asap
Click to expand...
Click to collapse
Same with me bro. I have reached out to service center and they have repaired my mobile by flashing the stock firmware and that too within the warranty(you don't have to pay anything).
I have also tried to flash it myself but for using SP Flash Tool I need scatter file which I don't have and if I have to use realme tool it asks for username. So my only option is to reach out to service center.
VjayReddy said:
Same with me bro. I have reached out to service center and they have repaired my mobile by flashing the stock firmware and that too within the warranty(you don't have to pay anything).
I have also tried to flash it myself but for using SP Flash Tool I need scatter file which I don't have and if I have to use realme tool it asks for username. So my only option is to reach out to service center.
Click to expand...
Click to collapse
Thats nice tho. Here in the PH they wont even bother to fix it. I mean it is stated that once you play around with it, the warranty will not cover the damages made
Nappx said:
help me, my realme 6 has bootloop and can't enter recovery mode and fastboot mode, what should I do? Plz help asap
Click to expand...
Click to collapse
Your bootloader is opened or closed
I have the same issue after OTA update. My Realme 6 is rooted with magisk. I have read some forum that we need to remove the root to receive the OTA update. Thus I have restore boot image before i perform the OTA update. The phone reboot and keep updating for a few min. After that, the phone was stuck at initial screen, cannot even boot into the yellow realme logo. Cannot go into fastboot. It only load the Realme UI recovery with a system error display. Try the wifi update, also cannot find any wifi network.
Pls help. Maybe only way is send it to service centre.
tokthem said:
I have the same issue after OTA update. My Realme 6 is rooted with magisk. I have read some forum that we need to remove the root to receive the OTA update. Thus I have restore boot image before i perform the OTA update. The phone reboot and keep updating for a few min. After that, the phone was stuck at initial screen, cannot even boot into the yellow realme logo. Cannot go into fastboot. It only load the Realme UI recovery with a system error display. Try the wifi update, also cannot find any wifi network.
Pls help. Maybe only way is send it to service centre.
Click to expand...
Click to collapse
Latest update: when I am in realme recovery UI, I factory reset and also wipe data and reboot. I repeat that step again and boom the phone at last load the setup language screen. My phone is back to life again.
tokthem said:
Latest update: when I am in realme recovery UI, I factory reset and also wipe data and reboot. I repeat that step again and boom the phone at last load the setup language screen. My phone is back to life again.
Click to expand...
Click to collapse
thanks bro it worked for me as well , i manually do an ota update then i perform factory reset continuously for a two to three times , and boom realme yellow logo comes with setup screen
VjayReddy said:
Same with me bro. I have reached out to service center and they have repaired my mobile by flashing the stock firmware and that too within the warranty(you don't have to pay anything).
I have also tried to flash it myself but for using SP Flash Tool I need scatter file which I don't have and if I have to use realme tool it asks for username. So my only option is to reach out to service center.
Click to expand...
Click to collapse
Is it unlocked bootloader or just bootloop? because I want to root but it fails
Bootloop
Maybe should restore stock vbmeta and boot.img before updating to newer version
If it bootlooped and restarts at boot logo. Try holding volume up and down and power when the first logo appears (not the animated gold realme logo) let go of the power button. The stock recovery will start. If you flashed a wrong custom recovery then bootlooped...then you are in for a real problem. But it's okay...you can still use your phone as a paper weight.
bro as here i cant boot in recovery mode or fastboot mode
Nappx said:
help me, my realme 6 has bootloop and can't enter recovery mode and fastboot mode, what should I do? Plz help asap
Click to expand...
Click to collapse
cant turn offf how did you go to recovery mode
divinevergil said:
cant turn offf how did you go to recovery mode
Click to expand...
Click to collapse
Try or go to service center
carlostabanud91 said:
If it bootlooped and restarts at boot logo. Try holding volume up and down and power when the first logo appears (not the animated gold realme logo) let go of the power button. The stock recovery will start. If you flashed a wrong custom recovery then bootlooped...then you are in for a real problem. But it's okay...you can still use your phone as a paper weight.
Click to expand...
Click to collapse
i made this mistake, if i send the phone to service center , they coud fixt it?
---------- Post added at 06:23 AM ---------- Previous post was at 05:36 AM ----------
Hello.
I have a really serious problem, after installing magisk the phone restarts and get into a infinite restart, I can't enter fastboot mode with the button combination, the phone don't even power off, only restarts.
I read some posts and things over the internet but it seem like a hard brick.
Please help me, I need to go to customer service in my country? Or the phone definitely not gonna work at all? .
Nappx said:
help me, my realme 6 has bootloop and can't enter recovery mode and fastboot mode, what should I do? Plz help asap
Click to expand...
Click to collapse
I have the same problem. my device keep on restarting any software or application to fix this?
Hello, I have same problem. I tried install a magisk_patched.img and reboot then it stuck at realme (white font) logo and keep restarting. I also tried to press the button combination for fastboot and stock recovery but not working at all. I wonder if there any method to enter edl mode such as testing point to trigger edl mode in other phones?
VjayReddy said:
Same with me bro. I have reached out to service center and they have repaired my mobile by flashing the stock firmware and that too within the warranty(you don't have to pay anything).
I have also tried to flash it myself but for using SP Flash Tool I need scatter file which I don't have and if I have to use realme tool it asks for username. So my only option is to reach out to service center.
Click to expand...
Click to collapse
Bootloader locked or unlocked
{Mod edit: Question mark added}
my realme 7 phone is dead | bootloop | stuck on restart | can't enter in realme recovery mode
while downgrading Andriod 11 to Andriod 10
plz. help me
Nappx said:
help me, my realme 6 has bootloop and can't enter recovery mode and fastboot mode, what should I do? Plz help asap
Click to expand...
Click to collapse
Don't worry just go to the service centre they will fix it within minutes
i just got it fixed too i had the same problem
gajendra2003 said:
my realme 7 phone is dead | bootloop | stuck on restart | can't enter in realme recovery mode
while downgrading Andriod 11 to Andriod 10
plz. help me
Click to expand...
Click to collapse
Bro same thing happened to my realme phone while downgrading from android 11 to android 10
Have you found any solution?

Categories

Resources