Hello :cyclops:
If you have to make a bet, which of these tablets do you think will run a CyanogenMod firmware?
Samsung Galaxy Tab 3 10"
or
Huawei MediaPad 10 Link
I have to choose one between them and I'm confused because their hardware specs are pretty similar. :silly:
Sekmeth said:
Hello :cyclops:
If you have to make a bet, which of these tablets do you think will run a CyanogenMod firmware?
Samsung Galaxy Tab 3 10"
or
Huawei MediaPad 10 Link
I have to choose one between them and I'm confused because their hardware specs are pretty similar. :silly:
Click to expand...
Click to collapse
Hi,
Sorry I think you're in the wrong thread
I have to choose between these 2 tablets, but both them are similar so I think that the "best" way to choose one is the hope which of they could run a CyanogenMod rom.
If this is not the correct place, where can I post my question?
Could you as a admin move this threat to the correct place? :good:
sorry for my english
Related
Hey I have a ViewSonic VPAD10 that I picked up from a friend. It seems to have dual boot for Windows 7 and Android 1.7 i think.
Is there a way to install Android on the NAND, for example Honeycomb?
Also, does the ViewSonic ViewPad 7 applies to the VPAD10....for example the ROMS available?
Datfoooo said:
Hey I have a ViewSonic VPAD10 that I picked up from a friend. It seems to have dual boot for Windows 7 and Android 1.7 i think.
Is there a way to install Android on the NAND, for example Honeycomb?
Also, does the ViewSonic ViewPad 7 applies to the VPAD10....for example the ROMS available?
Click to expand...
Click to collapse
Anyone ideas on this one?
The short answer - no, it will NOT work !
Datfoooo said:
Anyone ideas on this one?
Click to expand...
Click to collapse
Assumed you've search but missed the response, you would've learned to NOT do it but you could still try your luck & ask the folks at the Viewsonic 10" Tab sub-forum for what you wanted to believe in.
See post #41 -
http://forum.xda-developers.com/showthread.php?t=1015005&page=5
It will brick your device & turn it to a paper weight ....
Hey all!
I've just got an Arnova 10 4GB which has Android installed,
Now I put the file update.img on the root on the tablet
, then I begin the update process .......
BUT suddenly , the device turned OFF and it doesn't wanna turn ON again ,,,
what can I do to solve this prob.
waiting yr replies ,,,,,
Thanks in advance.
Hello ??
anyone can HELP ??
HotMind said:
Hey all!
I've just got an Arnova 10 4GB which has Android installed,
Now I put the file update.img on the root on the tablet
, then I begin the update process .......
BUT suddenly , the device turned OFF and it doesn't wanna turn ON again ,,,
what can I do to solve this prob.
waiting yr replies ,,,,,
Thanks in advance.
Click to expand...
Click to collapse
firstly this isn't ebay you dont need huge writing and different coloured font. And this isn't really a device supported in these forums, but firstly was the battery fully charged/plugged in when you tried to update? Does it turn on at all? i.e. get the first splash screen?
zacthespack said:
firstly this isn't ebay you dont need huge writing and different coloured font. And this isn't really a device supported in these forums, but firstly was the battery fully charged/plugged in when you tried to update? Does it turn on at all? i.e. get the first splash screen?
Click to expand...
Click to collapse
firstly thnx for yr reply .
** what's the wrong with the huge colored writing ?? it just to attract the reader
** u told me this isn't device suppoted in these forums , (HOW) ? this is the ARCHOS forum which designs the ARNOVA 10 which I need the support for .
yes , the battery was fully charged , then while the updating process , it turned off and never get ON again ...
many thnx 4 yr help
HotMind said:
firstly thnx for yr reply .
** what's the wrong with the huge colored writing ?? it just to attract the reader
** u told me this isn't device suppoted in these forums , (HOW) ? this is the ARCHOS forum which designs the ARNOVA 10 which I need the support for .
yes , the battery was fully charged , then while the updating process , it turned off and never get ON again ...
many thnx 4 yr help
Click to expand...
Click to collapse
Why do you need to attract the reader? if they have opened your thread they will read it...
this is the archos Gen 8 and Gen 9 forums which the arnova products do not full into.
zacthespack said:
Why do you need to attract the reader? if they have opened your thread they will read it...
this is the archos Gen 8 and Gen 9 forums which the arnova products do not full into.
Click to expand...
Click to collapse
Do U mean that I've to post my question on Gen 9 forum , (not Gen 8) ??
waiting yr reply
HotMind said:
Do U mean that I've to post my question on Gen 9 forum , (not Gen 8) ??
Click to expand...
Click to collapse
Sorry for interrupting your discussion.
We got similar questions few days/weeks ago.
The Arnova devices have different hardware than the original Archos Gen8/9 series.
These tablets are neither gen8 nor gen9, they are something special
The firmware and update mechanism is also different.
The best would be to search for Arnova related stuff in this forum (i'm lazy too, but i like searching).
There'd been a lot of related postings already, so you might get some answers/links which put you in the right direction.
Best regards and good luck,
scholbert
HotMind said:
Do U mean that I've to post my question on Gen 9 forum , (not Gen 8) ??
waiting yr reply
Click to expand...
Click to collapse
scholbert said:
Sorry for interrupting your discussion.
We got similar questions few days/weeks ago.
The Arnova devices have different hardware than the original Archos Gen8/9 series.
These tablets are neither gen8 nor gen9, they are something special
The firmware and update mechanism is also different.
The best would be to search for Arnova related stuff in this forum (i'm lazy too, but i like searching).
There'd been a lot of related postings already, so you might get some answers/links which put you in the right direction.
Best regards and good luck,
scholbert
Click to expand...
Click to collapse
As scholbert said, and what I meant was these arnova tablets are neither archos gen 8 or gen 9 so its very unlikely you will find the help you need here, so yes best search xda or more likely try to find another forum that has a section for these tablets
Try here HotMind
http://forum.archosfans.com/viewforum.php?f=79
Dears,
anybody succeeded in dual booting Windows 8 / Android a Samsung ATIV SmartTAB XE500T1C?
Best regards
ultradj83 said:
Dears,
anybody succeeded in dual booting a Samsung ATIV SmartTAB?
Best regards
Click to expand...
Click to collapse
This is Intel, right?
If so, try the Android x86 project. I wish I could put the link it, but XDA's "Noob control" isn't letting me. Dang.
Also, I had to remove part of your earlier post since it wouldn't let me quote that link either. Sorry for that confusion.
Hello,
I wanted to ask, if there is any ROM development for the Ployer Momo 12?
a new toy mate :laugh:
remember i can hunt you too :laugh:
Christian Nothing said:
a new toy mate :laugh:
remember i can hunt you too :laugh:
Click to expand...
Click to collapse
You took me for another one, maybe a former member? I own a 10 inch Chinese tablet for some time now, it's a good tablet but bad software support, only 4.1.1.
Do you do custom Roms for this?
tempdroid said:
You took me for another one, maybe a former member? I own a 10 inch Chinese tablet for some time now, it's a good tablet but bad software support, only 4.1.1.
Do you do custom Roms for this?
Click to expand...
Click to collapse
really
sorry i might confused you with an former member
if you gave me an rom stock from that tablet i'll probably build one :laugh::laugh:
oh btw an google search gave me this : http://www.flashmyandroid.com/forum/showthread.php?3907-ROM-Ployer-MOMO12-SlimMod-ROM
cheers
Ohh, there is a stock ROM for this tablet, it can be found here download(.)ployer(.)cn (Sorry, can't post URLs as junior member (You have to click on "Momo12" and read through some chinese stuff to get it.
I know SlimMod ROM and already wrote in that forum, this version is based on an old release and the dev stopped development...
Can you have a look at the Stock ROM?
Don't know , if I'll have some time maybe I'll try to help you
⇚███▓▒░░SNAPPED FROM MY JellySNAP ROM░░▒▓███⇛
Christian Nothing said:
Don't know , if I'll have some time maybe I'll try to help you
Click to expand...
Click to collapse
Hello Chris, this would be fantastic. At first, I need to get a good recovery on that tablet...
Let's see, if there's something around XDA.
tempdroid said:
Hello Chris, this would be fantastic. At first, I need to get a good recovery on that tablet...
Let's see, if there's something around XDA.
Click to expand...
Click to collapse
Why you don't build one for it
Can we continue on PM
⇚███▓▒░░SNAPPED FROM MY JellySNAP ROM░░▒▓███⇛
Anyone else with a good hint?
I finally found it!!!
Just to let you know: There is a great CM ROM out there for the Momo12: Crew RKTablets Genio CM10.1 v1.3.5.
I've installed it yesterday and now I have a fantastic running 4.2.2 Custom ROM with CWM Recovery!!! :good::good::good:
You can use this also on Captiva Pad 10.1, it's a clone of the Momo12.
Hello,
I bought recently huawei ascend g700 and I would like to know is there any way to upgrade to 4.4 or higher? Does it have CyanogenMod 11 or some other version for this device? I have 4.4.2 on my Nexus 7 II and I'am very satisfied!
Regards, Thank's in advance!
I am also curious about this. Have you found anything since you posted this thread? Was hard to find any specific information about installing a custom ROM on the G700, so I am not sure if that is because it is not currently possible, or for other reasons.
Hi folks,
Develop a Custom ROM is not that easy, you have to find the well-known developers of the forum and ask them if they're planning to do that, otherwise you'll only have the chance to wait for an upgrade directly from the manufacturer.
Best regards.
Enrique
Thanks Enrik for your nice comments,
But some one must be digging something in the ground for this Huawei's big smartphone
And we hope it will soon be availabe in this forum because people in this world are so lovely and helping.
Dule Cerak said:
Hello,
I bought recently huawei ascend g700 and I would like to know is there any way to upgrade to 4.4 or higher? Does it have CyanogenMod 11 or some other version for this device? I have 4.4.2 on my Nexus 7 II and I'am very satisfied!
Regards, Thank's in advance!
Click to expand...
Click to collapse
knutmarius said:
I am also curious about this. Have you found anything since you posted this thread? Was hard to find any specific information about installing a custom ROM on the G700, so I am not sure if that is because it is not currently possible, or for other reasons.
Click to expand...
Click to collapse
Enrique XDA said:
Hi folks,
Develop a Custom ROM is not that easy, you have to find the well-known developers of the forum and ask them if they're planning to do that, otherwise you'll only have the chance to wait for an upgrade directly from the manufacturer.
Best regards.
Enrique
Click to expand...
Click to collapse
talvigi said:
Thanks Enrik for your nice comments,
But some one must be digging something in the ground for this Huawei's big smartphone
And we hope it will soon be availabe in this forum because people in this world are so lovely and helping.
Click to expand...
Click to collapse
I have ported cm11/12 from another phone. Touchscreen not works and that rom is useless. if anyone can fix it will be great.