Switching from PAC-Rom to CM11, I was missing the 'less frequent notifications' feature.
When you have some chat app (like whatsapp) that make vibrate/sound/both on any incoming message, and someone sends you like 10 messages in a row it can be very annoying
What this feature does is limit the number of times an app (single-app) can make a notification.
You define a time-frame, and any extra notification within this time-frame (=annoying notification) will be stripped down from its sound/vibrate/both data (but will be shown).
So, It's done!
http://repo.xposed.info/module/com.ofnitz.xless
Please download from Xposed Repo to get update notifications
UPDATES
2014-12-22 (version 1.1.1) :
* Fix and block notifications for whatsapp, hangouts, and other applications (they played the notification sound not thru the regular notification system).
2014-09-16 (version 1.1.0) :
* Added new 'Reload Preferences' option to Live Reload settings without restart
* Added few more thresholds [2,3,5,10,15,30] minutes
2014-09-04 (version 1.0.2) :
* Fixed crash on 'Test notification' (By requiring the VIBRATE permission)
2014-09-01 (version 1.0.1) :
* Re-released on Xposed repo (fixed package name)
2014-08-31 (version 1.0.0) :
* Will remember notification time only if it has sound/vibrate
* Released on Xposed repo
ill test this one out
4.4.4 Moto X. When I press test notification, should something happen or it's just like a "save" button? When I click it, nothing happens.
alex91s said:
4.4.4 Moto X. When I press test notification, should something happen or it's just like a "save" button? When I click it, nothing happens.
Click to expand...
Click to collapse
Thanks for feedback :good:
That is a button to test the module after a restart. I should clarify that..
So just enable the module, set your preferences, and reboot.
Than you can test it manually by clicking this button
ofmb said:
Thanks for feedback :good:
That is a button to test the module after a restart. I should clarify that..
So just enable the module, set your preferences, and reboot.
Than you can test it manually by clicking this button
Click to expand...
Click to collapse
I did it, rebooted and everything, but nothing happens.
same here
alex91s said:
I did it, rebooted and everything, but nothing happens.
Click to expand...
Click to collapse
What should happen is that only first click on 'test notification' should trigger sound+vibrate. All subsequent clicks within the X seconds time frame should not trigger sind/vibrate..
Are you saying that no notification at all triggered sound?
@shadowcreeper_1
Just so you know, it's working perfectly here. Awesome module.
On first reboot after installing I got a few system server crashes. It then booted and it seems to work just fine (with the Test Notifications button). Thanks! LG G2 stock 4.4.2
Brilliant. Works fine. I'm actually using gravitybox to control notifications for my apps and it has a function to limit amount of notifications but the least amount of time is one minute which is too much. This one, with five seconds, is great. Now you just need to make it have per-app settings
THANK YOU!!!!!!! The amount of times I get 5-6 messages in a row from Whatsapp and it was so annoying.
Please upload it at Xposed repo.
i tested the module on PA 4.5 beta 3, nexus 5, setting the 30 seconds interval. i tried with the notification test button, and it works. Then i tried with hangouts but i get a first notification, then no sound, even after 1+ minutes.
EDIT: i can get a new notification only if i read the previous
A question: the timer starts from the first notification or it restarts on every notification?
alex91s said:
Please upload it at Xposed repo.
Click to expand...
Click to collapse
Done.
RobLudo said:
i tested the module on PA 4.5 beta 3, nexus 5, setting the 30 seconds interval. i tried with the notification test button, and it works. Then i tried with hangouts but i get a first notification, then no sound, even after 1+ minutes.
EDIT: i can get a new notification only if i read the previous
A question: the timer starts from the first notification or it restarts on every notification?
Click to expand...
Click to collapse
What I think happens that some apps re-notify every Z seconds without sound/vibration.
Thanks for pointing that out as this has led me to improve behavior and save the notification
time only when it has sound/vibration.
New version on op and on exposed repo
I'm getting a package name error on xposed
Sent from my HTC6525LVW using Tapatalk
---------- Post added at 04:32 PM ---------- Previous post was at 04:31 PM ----------
Screenshot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my HTC6525LVW using Tapatalk
ofmb said:
New version on op and on exposed repo
Click to expand...
Click to collapse
Thank you! i'll test the behavior as soon as i can.
ofmb said:
Done.
What I think happens that some apps re-notify every Z seconds without sound/vibration.
Thanks for pointing that out as this has led me to improve behavior and save the notification
time only when it has sound/vibration.
New version on op and on exposed repo
Click to expand...
Click to collapse
Awesome, but package name is incorrect .
Not sure if this is fixed in the latest version but when I tried it out initially it seemed like sometimes it would cut notifications short? Like I have an app that vibrate for 250 ms then a little pause then 250 ms again.. It would be cut short and there hard to hear. Is it just me?
@ofmb: I've hidden the module on Xposed, can't change the the package name. You could just create it with correct one
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AFH Link (Indefinitely option removed)
Play Store Link (Indefinitely option included)
Change the default screen timeout! Keep On Keeping On keeps your screen on!
The default screen timeout interval on Android Wear is too short!
Having such a short timeout makes it difficult to perform tasks that require pauses or to demonstrate features for an audience.
Using KOKO (Keep On Keeping On) you can keep your screen on longer!
Choose from many timeout options ranging from 5 seconds to 2 hours. Or keep your screen on indefinitely!
Please allow a few minutes for the app to be installed on the wearable after installing to mobile device.
Please be aware that setting a long screen off time will affect your battery life.
Now use wrist gestures in KOKO to select your screen timeout without touching your watch!!!!
Feel free to message us with requests for timeout intervals if you can't find one that works for you.
Thanks for trying it out and any feedback you may have.
I thought payed apps are allowed here ONLY, if also a free Version is pushed!
Free version coming soon for XDA, sorry for the delay. Created post on mobile and will update when I get to desktop.
Thread re-opened.
Again, sorry for the delay in getting the free version up. But it's there (OP) now. Please leave feedback if you find any issues.
Free one crashes on my G Watch and a friend's Gear Live, we are both running 5.1.1w, I can provide a log later or tomorrow if needed.
Ranomez said:
Free one crashes on my G Watch and a friend's Gear Live, we are both running 5.1.1w, I can provide a log later or tomorrow if needed.
Click to expand...
Click to collapse
Havent received 5.1.1 on my Moto360 yet. I'll check it out on the emulator and see if I can find what's up. Thanks for letting me know.
Ranomez said:
Free one crashes on my G Watch and a friend's Gear Live, we are both running 5.1.1w, I can provide a log later or tomorrow if needed.
Click to expand...
Click to collapse
Alright, I think I fixed it. 5.1.1 required a new library that was previously missing. Please let me know if v1.3 works for you.
registered-user said:
Alright, I think I fixed it. 5.1.1 required a new library that was previously missing. Please let me know if v1.3 works for you.
Click to expand...
Click to collapse
Well it does not FC anymore but it does not seem to do anything.
EDIT: It does in fact work but not the short options, nothing under 30s works.
Ranomez said:
Well it does not FC anymore but it does not seem to do anything.
EDIT: It does in fact work but not the short options, nothing under 30s works.
Click to expand...
Click to collapse
Okie dokie, I'll look into that. They work on the emulator so I may have to wait until I get 5.1.1 on my Moto360 to diagnose it. Maybe the default timeout was increased in 5.1.1?
registered-user said:
Okie dokie, I'll look into that. They work on the emulator so I may have to wait until I get 5.1.1 on my Moto360 to diagnose it. Maybe the default timeout was increased in 5.1.1?
Click to expand...
Click to collapse
I don't really think so because I think that's what it always was for me even on 4.4 and 5.0, I think 30s always the default, that's why I was hoping your app would let me decrease that time.
That is long for default. On my Moto is was like 4 seconds, that's why I made this app. I don't really want the app to force screen off, just keep it on. Maybe it's a build.prop setting? Are you rooted? Running a custom ROM? I'm neither.
EDIT: I see you are indeed rooted by your sig, maybe it's something in your ROM?
registered-user said:
That is long for default. On my Moto is was like 4 seconds, that's why I made this app. I don't really want the app to force screen off, just keep it on. Maybe it's a build.prop setting? Are you rooted? Running a custom ROM? I'm neither.
EDIT: I see you are indeed rooted by your sig, maybe it's something in your ROM?
Click to expand...
Click to collapse
I just have root and a custom kernel, didn't modify anything in the ROM, and I did keep the watch not rooted for a long time and that's just the screen on time I always had by default, I can't see anything in build.prop that I could modify to lower the screen on time, I also used some other apps from Play Store on older android versions to do that but they have not been updated in a long time and thus don't work anymore. I was hoping your app would allow me to do that but I understand if you don't want to give that option, I will learn java in my next year of college so I might try to make my own app to do that afterwards, thank you for your work anyway, it's good to have it for those that want longer screen on time.
I was thinking off how to implement the screen off, how to know when the users not still interacting? Maybe a transparent overlay on the entire screen that listens for touches and after each touch resets a timer that when reaches its end turns off the screen? But this would require the DRAW OVER APPS permission and a Service to add the overlay to WindowManager. If I get some time I'll see if I can slap a demo together.
Promo Codes!!!!
Get them while they're hot!!!
MBEHRZ4M12L75MRLYD0GXXX
0YWBQK4S8HXVM2NGQ6MRYJ4
8EVX0T00LKXXPPZ44Q75R7A
B5B9FAGSZFYNU0FKFLFE215
N06LCZYNXXJ2RX0K72ZAYGZ
UAT3RBQMSZB32KH8YSUSEGG
8GRCE6ZYGWFA2ULFWV3V451
D202K3D9P6WYEEZAJ487252
470VUY7WE4H72SVS79SL9CV
RQFG51X5MN6M1LXJSJ6BN35
XXX4V1PP2CB1PZEVZ9XUW72
STAV52MDEMBD4Q3WRFX6VP5
H7VH9DW14GDTZZ4A7ZRUUSJ
9NXKWZPH8YDZT2AK4SDEKVB
P4TBS2PUQ2ZT5FRDY7E4750
YA14HTT19X2C2MFBVL88M5W
GRKKPEM4H824Z2DNJ1WPS82
NUDFC4AF43HGDBX7BJ1A7L9
RGG26LQMXAMD0UB2VCKJS3V
C83C32X5G4JHJ33TT2WJUAW
Please post which code you use so I can update this list
7 codes remain unused, not which ones though so you may have to try a couple before you find an unused code.
,j????????????
Thanks.... XXX4V1P.... used...
Inviato dal mio SM-N910F utilizzando Tapatalk
Over half the codes remain unclaimed, if you use one please post the first few characters of the code you used so I can update the list, thanks. :highfive:
registered-user said:
Over half the codes remain unclaimed, if you use one please post the first few characters of the code you used so I can update the list, thanks. :highfive:
Click to expand...
Click to collapse
Thanks...
BTW these codes are all coming up used... (I only used 1)
NUDFC4AF43HGDBX7BJ1A7L9
RGG26LQMXAMD0UB2VCKJS3V
C83C32X5G4JHJ33TT2WJUAW
boufa said:
Thanks...
BTW these codes are all coming up used... (I only used 1)
NUDFC4AF43HGDBX7BJ1A7L9
RGG26LQMXAMD0UB2VCKJS3V
C83C32X5G4JHJ33TT2WJUAW
Click to expand...
Click to collapse
Does it work on a iPhone as well?
Can try it tonight.... But happy if others has experiences on forehand...
Hi everyone.
Ever since my phone got Android 6 update I've noticied an wired behaviour regarding volume slider: it simply won't go away. And I'm not alone... just google it and see.
So if you are in the same boat, give this module a try and leave a feedback
WHAT TO EXPECT FROM THIS MODULE?
This module fixes Marshmallow's volume dialog excessive delay on closing. See the post #4 for screenshots.
DOWNLOAD - Xposed Repository
http://repo.xposed.info/module/com.glauber.android.xposed.volumesliderdelayfix
For either feature requests or bugs please use GitHub issues
https://github.com/glauberlima/VolumeSliderDelayFixForMarshmallow/issues
Thanks:
@rovo89 for Xposed Framework
All XDA community
XDA:DevDB Information
Volume Slider Delay Fix for Marshmallow, Xposed for all devices (see above for details)
Contributors
glauberlima
Source Code: https://github.com/glauberlima/VolumeSliderDelayFixForMarshmallow
Xposed Package Name: com.glauber.android.xposed.volumesliderdelayfix
Version Information
Status: Stable
Current Stable Version: 1.0.1
Stable Release Date: 2016-02-12
Created 2016-02-12
Last Updated 2016-04-09
Changelog
v1.0.1 - 2016-02-12
Initial public version
Technical details
Original file: VolumeDialog.java
Original method: computeTimeoutH
Proposed change type: method replacement
Original source code:
CM13: https://github.com/CyanogenMod/andr...com/android/systemui/volume/VolumeDialog.java
AOSP: https://android.googlesource.com/pl...com/android/systemui/volume/VolumeDialog.java
The original method as it is:
Code:
private int computeTimeoutH() {
if (mAccessibility.mFeedbackEnabled) return 20000;
if (mSafetyWarning != null) return 5000;
if (mExpanded || mExpandButtonAnimationRunning) return 5000;
if (mActiveStream == AudioManager.STREAM_MUSIC) return 1500;
return 3000;
}
Now, look at the following line within original method:
if (mAccessibility.mFeedbackEnabled) return 20000;
Very suspicious, isn't it? If something related to accessibility is turned on then timeout is set to 20000 ms (20 seconds). We've found the culprit for the delay
So my proposed change is simple as that:
Code:
private int computeTimeoutH() {
return 1500;
}
Why 1500?
Because it's the lowest value Android has been using at original method.
And that's it
Screenshots
Image 1: When the module is installed volume panel goes away after 1.5 seconds
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Image 2: When the module is NOT installed volume panel stays active for 20 seconds!
Reserved 4
Thanks. Is this also needed on CM13? I already use Gravitybox (MM).
Verstuurd vanaf mijn SM-G900F met Tapatalk
When does this happen? I don't think I've ever experienced this bug before.
I'm getting 'incorrect package name' when trying to download.
gordonpn said:
When does this happen? I don't think I've ever experienced this bug before.
Click to expand...
Click to collapse
This happens on Moto X2 (and probably the newer models too) running Android 6.
How many seconds does it take to yours to disappears after you increase/decrease volume by using hardware buttons?
glauberlima said:
This happens on Moto X2 (and probably the newer models too) running Android 6.
How many seconds does it take to yours to disappears after you increase/decrease volume by using hardware buttons?
Click to expand...
Click to collapse
~3,5s from pressing the button
What timeout does your module set? Configurable?
Edit: 1500ms as I see on Github. Still a tad long imho. Consider adding a UI?
XlAfbk said:
~3,5s from pressing the button
What timeout does your module set? Configurable?
Edit: 1500ms as I see on Github. Still a tad long imho. Consider adding a UI?
Click to expand...
Click to collapse
What's your phone?
fleming222 said:
I'm getting 'incorrect package name' when trying to download.
Click to expand...
Click to collapse
Where is this message being displayed?
glauberlima said:
What's your phone?
Click to expand...
Click to collapse
Nexus 5 on CM13
I've grabbed your code from Github and changed the timeout to 1s in the meantime
XlAfbk said:
Nexus 5 on CM13
I've grabbed your code from Github and changed the timeout to 1s in the meantime
Click to expand...
Click to collapse
Huum, Maybe this bug affects only Moto's on Android 6.
Without this fix the delay is set to 20 seconds!
It's something to do with Accessibility options.
glauberlima said:
Where is this message being displayed?
Click to expand...
Click to collapse
As a toast message when downloading using the xposed app.
I'm on a Moto X Force and my volume panel takes ~15 seconds to disappear.
fleming222 said:
As a toast message when downloading using the xposed app.
I'm on a Moto X Force and my volume panel takes ~15 seconds to disappear.
Click to expand...
Click to collapse
Same time for volume panel here, Stock 6.0 Moto X Play.
Also getting "incorrect package" error.
I have a Nexus 6P with Marshmallow 6.01. The delay is 20 seconds before the audio panel disappears. This occurs even though I have GravityBox installed and set the timeout to 5 seconds or less (setting under Media Tweaks).
UPDATE: The following problem has been fixed by the developer!
I also get the message that the "Package name is incorrect" when I attempt to download using Xposed (version 80). Therefore, I haven't been able to test your module yet. Looking forward to trying, though!
Sent from my Nexus 6P using XDA Free mobile app
joyousfrank said:
Same time for volume panel here, Stock 6.0 Moto X Play.
Also getting "incorrect package" error.
Click to expand...
Click to collapse
Sorry for inconvenience. I've updated the package. Refresh and you will be able to see v1.0.1
Spikedude said:
I have a Nexus 6P with Marshmallow 6.01. The delay is 20 seconds before the audio panel disappears. This occurs even though I have GravityBox installed and set the timeout to 5 seconds or less (setting under Media Tweaks).
I also get the message that the "Package name is incorrect" when I attempt to download using Xposed (version 80). Therefore, I haven't been able to test your module yet. Looking forward to trying, though!
Sent from my Nexus 6P using XDA Free mobile app
Click to expand...
Click to collapse
Sorry for this error. I've updated the package. Could you try again? It will work now!
fleming222 said:
As a toast message when downloading using the xposed app.
I'm on a Moto X Force and my volume panel takes ~15 seconds to disappear.
Click to expand...
Click to collapse
@fleming222 the fixed version is up. Refresh and try again. Sorry for this.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi all! Let me present my new Xposed module, that combines together all my previous micro modules (such MIUI Brightness Fix, MIUI Separate Volume Control, etc).
Capabilities:
Unlink ringer and notification volumes. Add separated notification volume control in settings and unlink it from ringer volume control. Adds a notification volume slider in sound settings.
Add 3 way reboot (normal, recovery, fastboot) menu
Multiline contacts names. Disable trimming contacts with long names and display its on multiple lines.
Add russian language support in dialer (T9). Add support for russian language in dialer T9 contacts search. After enable/disable you should rebuild T9 index in Contacts app settings.
Add shortcut for launch dialer to lockscreen (swipe left to right). You can customize dialer package name and starting activity.
Fix automatic brightness steps (more smooth) and minimal brightness level on some devices. You can customize brightness and backlight levels gradation.
Installation:
Install Xposed framework for MIUI
Install module from Google Play
Activate it in Xposed Installer
In module UI check needed options
Reboot
Download:
extMIUIv7 on Google Play
If some of features not working - send me PM or email (address in Google Play) with Xposed logs.
Also, you can make a donation from application - that makes me happy and gives an incentive to the development of the program.
Version 1.1.0 uploaded to Google Play.
Added ability to change alphabet in contacts sidebar to russian language.
Added ability to enable or disable transparent blurred background of notification panel.
Added fix for music control in notification panel - now it's open current playing application, not only MIUI Music
Thank you. Perfect.
Thanks you!
Sent from my MI 3W using Tapatalk
Version 1.1.1 uploaded to Google Play. Update will be soon.
Changed process of dialer application selection - now you can choose between all installed phone & contacts apps on your phone and pick up needed activity of all of this apps interactively
Added ability to change default opening music player from notification panel control.
Added two new donations options - QIWI and Yandex.Money
Version 1.1.2 uploaded to Google Play. Fixed crash when selecting the dialer or music player app on some devices
Hi, great module!
A good addition would be the option to change ugly kitkat navbar buttons to the new Marshmallow ones (this problem exists on several devices)
Keep it up!
DaRk_dOg said:
Hi, great module!
A good addition would be the option to change ugly kitkat navbar buttons to the new Marshmallow ones (this problem exists on several devices)
Keep it up!
Click to expand...
Click to collapse
Hmm, can you send me screenshots with KK and MM navbar? Thank you.
xxxTy3uKxxx said:
Hmm, can you send me screenshots with KK and MM navbar? Thank you.
Click to expand...
Click to collapse
Here you are.
MIUI 7 (6.4.21) is still using this old navbar icons on several devices like nexus 5 (check the difference).
Thanks for your time.
Sent from my Nexus 5 using Tapatalk
DaRk_dOg said:
Here you are.
MIUI 7 (6.4.21) is still using this old navbar icons on several devices like nexus 5 (check the difference).
Thanks for your time.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Ok, got it. But what about this module: http://repo.xposed.info/module/com.ash.androidlnavigationbar
?
xxxTy3uKxxx said:
Ok, got it. But what about this module: http://repo.xposed.info/module/com.ash.androidlnavigationbar
?
Click to expand...
Click to collapse
This specific one does not work at all and even more recent ones just change "back" and "recents" while leaving "home" button in kitkat.
I suggested the fix in your thread since your module fixes several issues of MIUI
Best regards, D_d
Ok, i'll add this into my TODO list
xxxTy3uKxxx said:
Ok, i'll add this into my TODO list
Click to expand...
Click to collapse
Even if you don't manage to do it thumbs up for your time mate.
Cheers. D_d
Version 1.1.3 uploaded to Google Play. Fixed incorrect behavior of notification panel music control tweak with non-stock themes. Thanks for issue and testing to asd2003ru.
How to download for MM? I don't understand
hakan5816 said:
How to download for MM? I don't understand
Click to expand...
Click to collapse
From Google Play
xxxTy3uKxxx said:
From Google Play
Click to expand...
Click to collapse
I downloaded. In practice it throws.
Get logcat after crash and send me in PM
It has activated xposed but I get an error when the application entry. '' Unfortunately, extmıuıv7 has stopped. ''
hakan5816 said:
It has activated xposed but I get an error when the application entry. '' Unfortunately, extmıuıv7 has stopped. ''
Click to expand...
Click to collapse
Marshmallow? Send me logcat after crash (you can use catlog from google play, hit menu button and select Save)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
OnePlus3 Slider Mod
Mute - Vibrate - Loud
Hello,
this is my latest Xposed module for the OnePlus 3.
It changes the behavior of the OnePlus3 slider to
mute
vibrate
loud
instead of the normal do not disturb/priority/zen mode.
It also removes the popup and replaces the dnd icons in statusbar
In order for this to work correctly you need to go to your settings and
allow calls and messages from everyone in the priority settings.
This module has been tested on OnePlus3 with OxygenOS
Download from Xposed repo
[QRCODE]http://repo.xposed.info/module/com.chrisxe.xposed.op3slider[/QRCODE]
Thanks for this mod! I really need it!
However, it has two bugs I've found.
First one is a visual bug. When in vibrate mode, it shows two icons.
Then, when turn the slider down to normal mode, the sound is always low, even if it was loud when changing to vibrate.
Thanks. Installed and experienced the two vibration icon too. Hope next version will fix it.
Sorry for the two vibrate icons. i hid mine before with another module so i forgot about it..
should be fixed now.
@mrasquinho do you mean ringer or media volume?
MythosXe said:
Sorry for the two vibrate icons. i hid mine before with another module so i forgot about it..
should be fixed now.
@mrasquinho do you mean ringer or media volume?
Click to expand...
Click to collapse
Ringer volume my friend
Sent from my OnePlus2 using XDA Labs
@MythosXe
Hey, thats nice thanks. I created an app with is doing the same (via Tasker).
There are many users already (at least it looks like, the Thread in the offical Oneplus Forum is growing -> alert slider: ring-vibrate-silent is the title, can't post links yet)
Anyway im at the end of what i can do with tasker now (other customization)
Would you like to work together in order to customize the alert slider even more?
If so, can you tell me what your app is doing exactly, and why xposed is needed?
Thanks!
Weathon
Just installed this module and there are still 2 vibrate icons @MythosXe,You mentioned its fixed?
Hello I've installed this mod and it is working fine ...
There are 2 parts to this
1. (feature request)
Just one question... Can the order be reversed? Top position - all ; middle position - vibrate ; bottom position - mute?
Can this be done?
2. (bug identified)
When the slider is set "NORMAL" mode the volume is decreased and we must manually increase it again can you fix this bug..?
luxandroid said:
Just installed this module and there are still 2 vibrate icons @MythosXe,You mentioned its fixed?
Click to expand...
Click to collapse
what rom / version are you on? do you have the oneplus 3?
you can try the attached version if it works for you, just install it over your old one
(different approach to remove the second vibrate icon, if this one also fails for you, i might have another one)
about ringer volume:
i'll take a look soon, dont have much time atm, sry
@coolguynothot
yeah can be done. i might add some more settings in later versions
Any plans to support CM13?
Looks cool. Do you plan on releasing the source code? :good:
Hi, I remember you from alarmclock+ mod. Confirmed working (0.2 on OOS 3.2.2) with no bugs whatsoever. If I may ask for a request - could you reset the order of the slider in the same module? The top position being normal, mid stays vibrate, and the lowest becomes mute? That would be more logical, this is tingling my OCD.
Works well on my OP3 OxygenOS 3.2.2, icons display perfect, one for each position !
Can you please look at the bug of the low ringer?
Otherwise, it's unusable for me...
Sent from my ONEPLUS A3003 using XDA-Developers mobile app
CM13 not working. Please support.
Sent from my ONEPLUS A3003 using XDA-Developers mobile app
When i put it to mute and den back to loud ,the ringer volume is set to the minimum level. Plz fix this also reversing the slider and toast notification wud be nice add ons
thanx for this awesome module
invert slider and other goodies coming soon
(as soon as the xposed repo is back online )
MythosXe said:
invert slider and other goodies coming soon
(as soon as the xposed repo is back online )
Click to expand...
Click to collapse
It's back online right now.
Thanks for the update!
Have you seen the bug we talked? The one which puts ringer volume low when changing from mute/vibrate to loud?
Thanks
mrasquinho said:
It's back online right now.
Thanks for the update!
Have you seen the bug we talked? The one which puts ringer volume low when changing from mute/vibrate to loud?
Thanks
Click to expand...
Click to collapse
@MythosXe
Have you already uploaded new version?
Great app bro, waiting for an update with the small bugs fixed
Thanx
Hi guys, after i updated to emui 9.1 I have some notification issues. To be more precise I noticed that my WhatsApp's messages previews that always showed in notifications line, now is gone. I can see the number of chats with new messages but I can't preview them anymore. I also noticed that this is an effect from app lock. If I unblock WhatsApp and leave it open in the background then I can see previews again. But when I have it blocked with app lock, I have first to unblock with password to see previews. Anyone else noticed it? Any solution for this? I want to see message previews no matter how and no matter if the app is locked or not.. it was like that on emui 9.0 and o was doing fine.
I have the same problem.
Enviado desde mi LYA-L29 mediante Tapatalk
Fix
Just Disable the PowerGines its will be work for you.
I Disable it and get notifications for all apps.
Zimperium said:
Just Disable the PowerGines its will be work for you.
I Disable it and get notifications for all apps.
Click to expand...
Click to collapse
Where is this feature located?
bhagiratha said:
Where is this feature located?
Click to expand...
Click to collapse
It has to be done by adb on your computer
Click recent apps, swipe down your Whatsapp to lock it in background, no need adb or special trick
If you want to disable Power Genie
Link
sunu792002 said:
Click recent apps, swipe down your Whatsapp to lock it in background, no need adb or special trick
Click to expand...
Click to collapse
Don't work for me. I have the same problem. I don't show the message before open the app and unlock that.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Enviado desde mi LYA-L29 mediante Tapatalk
I have noticed this issue and it is so damn annoying
Did you find any solution to this?
Did you've tried to set the Autostart etc. to manual?
Settings - Akku - App Start - Whatsapp
Manuell for every 3 Things (Auto-Start, Second Start, Background)
I've done this for every App I need to get push-notifications and got no more problems with delivered notifications.
Does anybody has the Same Problem Like me . Since i Updated to 9.1 the notifications shows Eversthing in Lockscreen.
In 9.0 i get an notification on Lockscreen that was inviseblity . Mean First i have to unlock my Phone by Facescan then the notification Show it full.
Is this Feature disabled since 9.1 or does i need to activate it ?
Most people are not reading what is posted !!!
The contents of the WhatsApp messages is gone in notification after upgrading to 9.1.
Notifications work fine, but you cannot see from who are what message you expect to see when you are about to click on the notification. There is just an indication of how many messages you have received.
webpatrick said:
Most people are not reading what is posted !!!
The contents of the WhatsApp messages is gone in notification after upgrading to 9.1.
Notifications work fine, but you cannot see from who are what message you expect to see when you are about to click on the notification. There is just an indication of how many messages you have received.
Click to expand...
Click to collapse
Don't have this issue at all. I see the message just by swipe down notification bar. Did you check notifications on WhatsApp? (setting, app, WhatsApp, notification). It look like it's just the way to see the message : in place of click notification you have just to swipe down notifications panel and see the whole message.
I think they've changed how notifications are "grouped".
If you get one WhatsApp notification, you still see the message in the pull down notification panel.
If you get more than one WhatsApp notification, it shows you "x number of messages"
stuclark said:
I think they've changed how notifications are "grouped".
If you get one WhatsApp notification, you still see the message in the pull down notification panel.
If you get more than one WhatsApp notification, it shows you "x number of messages"
Click to expand...
Click to collapse
Also with one message I see no content.
I enabled the Popup in WhatsApp setting , waiting for a message to see if it changes.
Hi, i'm still having problem with notifications in WIFI connection only.
Currently i'm using GCM FIX(blue color icon) in playstore and set heartbeat to 1 minute and disable powergenie to have normal push notification.
But, if i don't use that, i got delay every 4 minutes notifications.
I'm just curious and if you guys can help me to send your FCM DIAGNOSTICS screenshot by dialing *#*#426#*#* (i really want to know if only me to experienced this or not just me)
the example of mine below, it's always shows Err:28 Time:xx every 4 minutes, this is not normal.
I also had the same issue, a simple restart fixed the issue for me, hope it does for you too.
Bumping this thread because my notifications do not have content previews anymore after the update to 9.1. I have tried the tips in exception for disabling power genie, what are the repercussions to doing this?
One observation I have is if app lock is on for the apps in question then then preview will not display even if the phone is unlocked. If the app itself is unlocked then notification previews work fine. I don't believe I had this issue with EMUI 9.0.
I have the exact same issue, it's not only WhatsApp but all the apps I use AppLock for. If the app is not locked I see them fine. If the app is locked, not only that I don't see the content but I cannot swipe it to dismiss it either...
It has nothing to do with killing the app in the background, since I DO get the notification but the content is blocked.
I'm having the same issue. Since upgrading to EMUI 9.1 last night, I can no longer see notification previews (e.g. WhatsApp). It just says WhatsApp and you can't expand the notification or see the preview like before. It's the same for other apps. It did briefly work but stopped ... I've tinkered with all the settings and restarted numerous times....I still have the issue.
Anyone else seeing this issue? Can anyone share a fix?
---------- Post added at 02:40 AM ---------- Previous post was at 02:36 AM ----------
matanlevanon said:
I have the exact same issue, it's not only WhatsApp but all the apps I use AppLock for. If the app is not locked I see them fine. If the app is locked, not only that I don't see the content but I cannot swipe it to dismiss it either...
It has nothing to do with killing the app in the background, since I DO get the notification but the content is blocked.
Click to expand...
Click to collapse
Thank you! So Huawei have changed the way App Lock protected apps display their notification. I guess what they've done makes sense from a security point of view...if you've chosen to lock the app then why should the phone display full previews with people being able to see what's in the secured app without passing validation....but I miss previewing WhatsApp haha