Hey guys! I need to purchase a USB car charger for my galaxy s4 and I want to make sure I'm buying the right one. I saw this one for example....Amazon.com: Anker® 18W / 3.6A Dual Port USB Car Charger with Built-In Micro USB Cord for Android (Apple Cable Not Included) (Black): Electronics
I know this one says its compatible with the S4 but my question is does it matter that its 18W/3.6A? Browsing different car chargers, I've noticed they all have different strengths. My question is, are they all safe?? Or will something like this one fry the phone or battery??
Any input will be greatly appreciated guys!!
More about : good usb car charger
USB Car Charger
i used one of these with my Charge and I did not have any issues with. I will say that only used it if had to have a bump to hold me over until I got home. Some after market chargers (Plugs and cords) will cause your phone to heat up. If your heat gets too high the next thing you know items are looking up and everything becomes a mess So I would say if you have to use this just be cautious and watch the heat on your phone.
Avantek USB Car Charge is good from all other chargers; personally I use Avantek USB car charger its service is so good.
I hope you also try to take good service.
Related
I bought a cigarette car adapter 12v with MiniUSb plug at the end (says for Motorola V3), but thought I could use it on my Hermes. It seems to charge (maybe a little slower charging that the one I had been using, which got destroyed), and is of good quality compared to my cheap ebay one that I had. It has smart charge protection in it. Someone had told me that any cigarette car charger meant for blackberrys, Motorolas etc that had a MiniUSb plug at the end could be used for the Hermes. Are they wrong?, Should I be worried about it hurting my device? The one I bought is through Cellgear.com,,sorry, the specs on the charger don't appear on the site.
If it is charging a little more slowly, then you are probably ok. Really, if we were all going by the book, we would check the charge rates and voltage outputs against the specs laid out by HTC.
One problem you may face is the the refusing to charge unless the device is switched off syndrome. This can happen with chargers not designed for the Hermes due to differences (it is thought) in the earthing connections. So although it may deliver a charge on the appropriate pins it can sometimes not allow the charging circuit to kick in due to the earth connection difference.
Just something to be aware of if it happens.
Mike
v3 usb charger
sure it will charge your phone, in fact I've found any mini usb will do the job, HOW-EVER if the phone is soft reset then the charger is pluged in it will charge ok, BUT once you "use" the phone it tends to stop charging..thats cause the real chargers are wired a little different.
my other half has a V3, my BT gps uses mini usb as does my BT headset, so I just use whatever is around and put up with the problem.
hope this helps
cheers
fadge
herm100
blacksatin
radio 1.49
+++
I've been using the following devices to charge my 8525.
My HTC supplied 8525 Charger.
My Motorola V3 Razr Charger
My Motorola V3 Razr Car Charger
My Nextel Blackberry Charger
My Nextel Blackberry Car Charger
Mini USB to PC (linux, win2k, winxp, vista, etc..)
Mini USB to laptop
Mini USB to CABLE BOX (DVR and Non-DVR)
Mini USB to Nintendo Wii
Mini USB to Playstation 2
Mini USB to Playstation 3
Mini USB to HP C6100 Series printer
All of them charge the phone with no issues.
I've found that Blackberry chargers work a bit better than Motorola chargers. I think the Moto chargers provide less amperage than the Blackberry ones. This means it may charge, but more slowly. If your battery is completely dead, the Moto charger may not be able to allow you to boot the Hermes. I think the Blackberry charger will.
The other thing is that cheap chargers, especially car chargers are pretty...cheap. I finally bought a name-brand charger and it's a lot more stable and better built that the generics. If you're gentle with your stuff it may not be a problem, but things sometime get thrown around in my car.
Hi
I have noticed that when using a car charger that worked on my older htc phone it heats up the jade and then it eventualy locks i have to hit the reset button or pull the battery.
has anyone else found this or know of a way round it, I like my old one as it has about a 2m cable whish reaches exactly where i need it to.
has anyone else seen a car charger like this that works with the jade?
cheers
Tom
I have a charger from an old O2 phone and it's working fine. I had no problems with car charger so far.
I looked on the mains charger i had with the device and it says output is 5V, I think the car charger is giving out 12V as I think it's just a straight through usb light socket so i wouldn't imagine it's stepping down that much, only problem is i don't like the chargers with curly cables i want a straight cable or a charger that just has a usb socket on it.
any idea where i could find that?
I have another option of adding another lighter socket on the dash of the car near where the phone is but i don't really like drilling holes in the car if i don't have to!
ok a quick google and i have found a 4 usb port 5v car charger so fingers crossed that will sort my problem out.
it's quite cool as it has surge and over load protection for each port so if one shorts out the others carry on working.
Hi,
I already bought 2 car charger kits but non of them fit, they all have a mini USB and not the special one the Jade needs.
Can anyone give me a LINK for a proper car charger, cause on eBay they sell all the mini USB crab which obviously doesn't work!
Thanks!
Cannes said:
Hi,
I already bought 2 car charger kits but non of them fit, they all have a mini USB and not the special one the Jade needs.
Can anyone give me a LINK for a proper car charger, cause on eBay they sell all the mini USB crab which obviously doesn't work!
Thanks!
Click to expand...
Click to collapse
Whats wrong with the mini usb ones? Thats what I use.
Hey all, the Sprint Hero comes with a charger that uses the usb cable to plug in to the phone. My problem is two-fold:
First, I like having a usb cord on me to charge where ever I go, and I don't like/am bad at remembering to take the usb cord out of the wall unit and pack with me in the morning.
Second, The usb cord isn't very long for a device that's plugged into an outlet near the ground (read: nearly every outlet in existence) and the usb cable barely reaches my desk for the phone to rest on.
Is there a decent charger that doesn't need our usb cable and has a couple extra feet in length? I don't want to get a universal charger because I don't want to fry the phone's charging system, which happened to my old Vogue. Everything I have found online is a universal type charger.
Has anyone had any experience with a good wall charger for the hero?
Thanks,
- JustPyro
You are aware that a standard USB cable works with the Hero? No need to use the one that came with the phone.
Regards,
Dave
Buy a longer USB-miniUSB lead, plug that into your home charger, and then carry the shorter one that HTC supplies around with you.
I've also found the stock one too short so I got a longer one, I also got a 3 inch long one to keep with me for tethering at work.... fits in my pocket nicely and it doesn't need to be any longer when the phone is sat next to my laptop.
These days I rarely find anywhere where I can't quickly borrow a miniUSB lead to charge my phone, they're used on so many different devices. Oh, and don't be afraid of 'universal' chargers - the Hero works with these fine, since USB is a 'universal' standard and 5v is 5v no matter where it comes from.
HI,
I'm hoping I can get some help. I have purchased a USB in can charger with two out puts. Now when I plug my ipod in through the USB charger it charges fine. When I plug in the X10 charger it will not charge, I've tried 2 separate USB chargers and 3 different charger cables with no success.
Am I missing somthing here? my ipod works fine which ever fag lighter charger I use but the X10 refuses to charge.
Can anybody help!!
Same here. End of the day i get sonyericsson original car charger instead.
Most devices made now, that are of quality, will not allow you to use third party power adapters. Not exactly how but its something to do with the exact current flowing to the device and/or using resistors in the adapter itself. I'm sure you could duplicate it and modify a cheap one for a dollar or two in parts instead of buying an SE brand
-X10(a)i 2.1, JIT ~ via XDA App
Allow me to Explain
USB charging from computers will work on all devices, this is "as intended". USB charging from a car socket or any other means is "not as intended" and so companies like Sony, Creative, Apple have got wise to the idea and started "blocking" it, they want more revenue from thier own charging devices so have over-ruled the basics of USB and made the device need a sort of "trigger" which is usually a wire that is different in a standard car changing USB dock.
The only way around this is to find a branded car usb charger or a company who knows the method and has added it to their type of USB socket.
So remember it's not mainly to do with amps or the voltage, but the companies themselves that stop you using a standard USB power adapter
Damn Dudes...
This has been discussed a zillion times in this forum..
Simply shorten the middle USB-PINs and everything will be fine...
Hey y'all,
I was in the AT&T store the other day getting a replacement for my wall charger (it died and they replaced it under the warranty, nice guys) and they told me not to use any other USB cable with my phone because the Motorola one is special.
They say it charges faster and maybe does other things better too, although they didn't really say what else. Is there any truth to this, or were they just trying to sell more cables?
they are trying to sell more cables...
I got a cable from ebay for my car with a 90 degree tip so i can charge the phone while using it as a navigation device. it surely wasn't a Motorola cable but works great. I have also used other peoples chargers and cables, I think I had an issue only once where I borrowed the cable from a friend and the cable didn't want to charge, don't know what that was about, didn't play with it enough to figure it out, may have been a defective cable. but basically it comes down to, the charger is putting out 5 volts, if the cable carries all 5 volts to the device and doesn't loose any, it will work fine. Also there are only 2 pins in the cable that are used for charging, one for (-) and one for (+). those pins are all the same for every usb charger or a computer. also phones with that type connector are wired to receive the charge only through those 2 pins. Thus, all of them are made the same. The only thing that manufacturers will do is change the gauge of the wire being used in the cable, but with a 3 foot long cable, and only 1amp of power maximum traveling through it, it just doesn't matter
hope I was some kind of help to you...
Hey! I was also thinking that in my mind but couldn't express. I thought everyone will think I'm getting crazy! Buy my atrix full charges in just 1.5/1.45 hours with the Motorola's Official Wall Charger & USB Cable. I haven't seen any phone that charges that fast! The battery backup of this phone is awesome! 2days with moderate use & 4.5 days with normal use. Aweomeeeeeee!
I use the Factory cable at home, and an old Blackberry cable at work. No difference in the USB cables performance.
Hi,
Yes, nothing magic...
The Motorola wall plug is 850mA output, a PC USB port is UP TO 500mA and for example the IPhone one (square one) is 1000mA.
So the charging time will be shorter with the IPhone one, then the Motorola and finally the USB port.
As I have already say in another thread, I have connect the +5V of my power supply directly on the USB port, so now, no problem !
Now you know !