Related
I was messing with my old tracfone and trying to install a custom ROM on it. I pressed wipe on TWRP and selected advance wipe and selected everything for factory defaults. After this, I restarted and my phone is stuck on the LG logo and won't go past it. I can't even get back into TWRP by spamming the volume up button. I also have a backup image, but what's the point if I can't access TWRP? Any help is appreciated.
Thanks
Wipe doesn't restore factory defaults, it removes everything. If you wiped system partition there's no Android on your phone, thus no system to boot. If that's the case, you can try to reflash twrp or install original firmware
minimale_ldz said:
Wipe doesn't restore factory defaults, it removes everything. If you wiped system partition there's no Android on your phone, thus no system to boot. If that's the case, you can try to reflash twrp or install original firmware
Click to expand...
Click to collapse
I'm not sure how to reflash TWRP because I used android terminal to install it.
kchesley said:
I'm not sure how to reflash TWRP because I used android terminal to install it.
Click to expand...
Click to collapse
If so, you need a PC, if it's Windows then download this tool - it's a system-wide fastboot that lets you flash software on your phone. It should also download drivers.
If everything goes OK, boot your phone into bootloader (you need to find the right key combination to do that, could be (phone off) power button+ volume down held for about 5-10 seconds, but I don't really know how it's like with this particular phone).
Go to the folder where you've got your TWRP, hold shift and press right mouse button. From context menu choose "open command window here"
In command window enter:
Code:
fastboot devices
if it returns your phones serial number it's OK, if it doesn't - you probably don't have proper drivers so look for them
If everything is OK enter:
Code:
fastboot flash recovery your-twrp-image-name.img
If this step is OK you can reboot:
Code:
fastboot reboot-bootloader
In the bootloader there should be an option to enter recovery mode which is now TWRP. From there you can flash some ROM.
Alternatively you can get ffactory firmware and flash it with fastboot (that's actually a better option to start with).
I hope that helps
minimale_ldz said:
If so, you need a PC, if it's Windows then download this tool - it's a system-wide fastboot that lets you flash software on your phone. It should also download drivers.
If everything goes OK, boot your phone into bootloader (you need to find the right key combination to do that, could be (phone off) power button+ volume down held for about 5-10 seconds, but I don't really know how it's like with this particular phone).
Go to the folder where you've got your TWRP, hold shift and press right mouse button. From context menu choose "open command window here"
In command window enter:
Code:
fastboot devices
if it returns your phones serial number it's OK, if it doesn't - you probably don't have proper drivers so look for them
If everything is OK enter:
Code:
fastboot flash recovery your-twrp-image-name.img
If this step is OK you can reboot:
Code:
fastboot reboot-bootloader
In the bootloader there should be an option to enter recovery mode which is now TWRP. From there you can flash some ROM.
Alternatively you can get ffactory firmware and flash it with fastboot (that's actually a better option to start with).
I hope that helps
Click to expand...
Click to collapse
Thanks for the help, but unfortunately, I think that the phone is junk. My phone can't get into boot-loader for whatever reason, and I heard some people post that the phone was designed to make the boot-loader non-accessible. I already tried to flash it with ADB while it starts up, but no device is detected (no USB debugging I guess). So unless I can flash the phone while It's on the LG logo, I can't do nothing.
I'm trying to flash TWRP, i've got ADB and i've got the Universal ADB Drivers. The device is properly detected when in EUI and my Device ID is displayed correctly when I type 'adb devices', however when I reboot into fastboot and type 'fastboot devices', nothing is listed and cannot continue.
Which drivers do I use? What is it that I need to continue?
Thanks!
Edit: Nevermind, connected it into my linux machine and got it to work easier (lol winBLOWS amirite) and finally got it to recognize the device in fastboot mode. I kept rebooting and failing to get into TWRP. I found somewhere else that before doing 'fastboot reboot' that you should hold VOL UP so you can immediately boot into twrp and make it permanent, which ended up working for me. Freedom!
ItsJono said:
I'm trying to flash TWRP, i've got ADB and i've got the Universal ADB Drivers. The device is properly detected when in EUI and my Device ID is displayed correctly when I type 'adb devices', however when I reboot into fastboot and type 'fastboot devices', nothing is listed and cannot continue.
Which drivers do I use? What is it that I need to continue?
Thanks!
Edit: Nevermind, connected it into my linux machine and got it to work easier (lol winBLOWS amirite) and finally got it to recognize the device in fastboot mode. I kept rebooting and failing to get into TWRP. I found somewhere else that before doing 'fastboot reboot' that you should hold VOL UP so you can immediately boot into twrp and make it permanent, which ended up working for me. Freedom!
Click to expand...
Click to collapse
I believe you need to configure in the developers options that you don't want to have the recovery overwritten on reboot. What also seems to work is to boot into the TWRP from the command line via 'fastboot boot <recovery-file-name>'
I have the exact same problem. I have installed all drivers and adb, but as soon as i am into fastboot and my device doesnt show up in the command line. If i want to install the recovery the command line just says <waiting for device> and nothing happend.
I already enabled the "Enable AT Port" Settings (http://forum.le.com/in/index.php?threads/le-max-2-x820-qpst-not-working.14820/) but i think this is not permanent turned on on my phone, because i have to repeat this step after every reboot.
Anybody got some tips?
Edit: Also booting directly into TWRP doesnt work, 'fastboot boot <recovery-file-name>' just ends up in <waiting for device>..
If you're using Win 8 or Win 10 you should turn off the driver singing verification before installing usb drivers for device.
In your case one of the drivers was blocked from installing and the systom does not see the device after it switches in fastboot/recovery mode.
I am not allowed to post urls, so google this: How to Disable Driver Signature Verification on 64-Bit Windows 8.1 or 10 (So That You Can Install Unsigned Drivers)
RovnyiK said:
If you're using Win 8 or Win 10 you should turn off the driver singing verification before installing usb drivers for device.
In your case one of the drivers was blocked from installing and the systom does not see the device after it switches in fastboot/recovery mode.
I am not allowed to post urls, so google this: How to Disable Driver Signature Verification on 64-Bit Windows 8.1 or 10 (So That You Can Install Unsigned Drivers)
Click to expand...
Click to collapse
Thanks for this Hint! Didnt know this
Nevertheless, no improvement so far. I Unistalled every driver and installed them again, but the PC doesnt recognize the phone when its in fastboot mode
Kampfgans said:
Thanks for this Hint! Didnt know this
Nevertheless, no improvement so far. I Unistalled every driver and installed them again, but the PC doesnt recognize the phone when its in fastboot mode
Click to expand...
Click to collapse
There is a chance, that your computer has installed the WRONG driver for the fastboot mode, so find any related to the phone entries in Device Manager when the phone is connected in fastboot mode, and if it is not "Android Phone/Android ADB Interface" -> remove them with remove driver checkbox checked. Optionally, if nothing changes -> try to manually pick the device driver to Android ADB Interface
RovnyiK said:
There is a chance, that your computer has installed the WRONG driver for the fastboot mode, so find any related to the phone entries in Device Manager when the phone is connected in fastboot mode, and if it is not "Android Phone/Android ADB Interface" -> remove them with remove driver checkbox checked. Optionally, if nothing changes -> try to manually pick the device driver to Android ADB Interface
Click to expand...
Click to collapse
I tried it now with the fifth computer and after a few strange error messages, it "succesfully" installed TWRP.
BUT: There is no TWRP installed on my phone. I followed every tip which i found how to exit the fastboot mode (pressing Vol+ & Power / Removing USB Cable / Tried TeamSpains Automatic Installer).
What is wrong with this phone ? - I think i will oben a new thread, thanks for your help!
Kampfgans said:
I tried it now with the fifth computer and after a few strange error messages, it "succesfully" installed TWRP.
BUT: There is no TWRP installed on my phone. I followed every tip which i found how to exit the fastboot mode (pressing Vol+ & Power / Removing USB Cable / Tried TeamSpains Automatic Installer).
What is wrong with this phone ? - I think i will oben a new thread, thanks for your help!
Click to expand...
Click to collapse
Kampfgans: Klingt irgendwo zwischen lustig und richtig bedrohlich...
Lots of ROMs (including most CM variants) like to "automatically 'recover'" recoveries, that is they overwrite the recovery partition with a copy of the "original" every time you reboot.
I seem to remember that my first attempt to overwrite the stock recovery using "fastboot flash recovery <twrp-image-name>" also didn't succeed in making TWRP "stick".
Within the CM13 which I installed next (over the stock v15) there is a developer option to control that, but in this case I simply used a trick, which seems to bypass the recovery overwrite: I told the phone to boot the TWRP recovery over USB after flashing.
It went like this:
fastboot flash recovery <name-and-path-of-TWRP-recovery> //puts the TWRP image on the recovery partition
fastboot boot <name-and-path-of-TWRP-recovery> //bypasses the recovery overwrite logic of either the bootloader or whereever it hides
That booted TWRP over USB and allowed me to install CM13.
There I disabled recovery overwrite in the deveoper's options and I've never had issues with TWRP disappearing since.
Actually you should in theory be able to leave the stock recovery in place and still use TWRP by booting it over USB on the fastboot command line.
I install drivers and USB but when trying to go to fast boot I receive "waiting for device"
I am very new to this, I rooted my Moto G4 and now I need to download SUHide in order to play Pokemon Go. When I try to enter recovery via my fastboot/abd folder I get a < waiting for any device > message. When I hold down the power + volume down button my phone just turns on as normal without entering bootloader even though my bootloader is unlocked. I tried downloading an app that loads recovery for me but when I tried that I got a "no command" screen with a little green robot.
From what I've read, it's possible I didn't flash my trwp properly? I don't know how this is possible since I just rooted my phone. I would appreciate some help, I'm afraid to take any random guesses at the risk of ruining my phone. Sorry if I'm missing something obvious or not giving enough info, I'm not very tech savvy.
levijoseph said:
I am very new to this, I rooted my Moto G4 and now I need to download SUHide in order to play Pokemon Go. When I try to enter recovery via my fastboot/abd folder I get a < waiting for any device > message. When I hold down the power + volume down button my phone just turns on as normal without entering bootloader even though my bootloader is unlocked. I tried downloading an app that loads recovery for me but when I tried that I got a "no command" screen with a little green robot.
From what I've read, it's possible I didn't flash my trwp properly? I don't know how this is possible since I just rooted my phone. I would appreciate some help, I'm afraid to take any random guesses at the risk of ruining my phone. Sorry if I'm missing something obvious or not giving enough info, I'm not very tech savvy.
Click to expand...
Click to collapse
Try power plus volume up button to go to fastboot mode.
If it not working then connect your android to pc and enable adb. Type "adb devices" enter then type "adb reboot bootloader" and enter. It boots your android in fastboot mode.
If adb commands not working then install adb and fastboot drivers and try again.
https://forum.xda-developers.com/showthread.php?t=2317790
In most devices, volume up + power boots up the recovery options, volume down + power boots the device into fastboot mode (volume buttons first plus power, pressing power button first would boot the device normally).
levijoseph said:
When I try to enter recovery via my fastboot/abd folder I get a < waiting for any device > message. When I hold down the power + volume down button my phone just turns on as normal without entering bootloader even though my bootloader is unlocked.
Click to expand...
Click to collapse
How did you install the custom recovery? Try flashing the recovery.img again (I'm guessing, since you have root, that you did not "flash" (fastboot flash recovery recovery.img) TWRP but just "boot" (fastboot boot recovery.img) it and installed SuperSU).
Ashwinrg said:
Try power plus volume up button to go to fastboot mode.
If it not working then connect your android to pc and enable adb. Type "adb devices" enter then type "adb reboot bootloader" and enter. It boots your android in fastboot mode.
If adb commands not working then install adb and fastboot drivers and try again.
https://forum.xda-developers.com/showthread.php?t=2317790
Click to expand...
Click to collapse
Okay, so that did work, and I was able to enter fastboot mode. However, once I scrolled down to "recovery mode" and tried to enter, I got the same "no command" screen.
rolland.arriza said:
In most devices, volume up + power boots up the recovery options, volume down + power boots the device into fastboot mode (volume buttons first plus power, pressing power button first would boot the device normally).
How did you install the custom recovery? Try flashing the recovery.img again (I'm guessing, since you have root, that you did not "flash" (fastboot flash recovery recovery.img) TWRP but just "boot" (fastboot boot recovery.img) it and installed SuperSU).
Click to expand...
Click to collapse
I used the official moto g4 root guide on this website to root my phone and I'm pretty sure I booted, not flashed, the recovery img (mine is named twrp-3.0.2-0-athene). So, I tried using the command you provided to flash the recovery img and I got a < waiting for any device > message in the command prompt. My phone is plugged in and my recovery img is in the adb / fastboot folder. Any idea what this means? Thank you for the help guys
edit: If it helps to know this, my phone has usb debugging enabled and it is recognized by my pc. I type adb devices and my moto g4 serial number does indeed show up.
levijoseph said:
I am very new to this, I rooted my Moto G4 and now I need to download SUHide in order to play Pokemon Go. When I try to enter recovery via my fastboot/abd folder I get a < waiting for any device > message. When I hold down the power + volume down button my phone just turns on as normal without entering bootloader even though my bootloader is unlocked. I tried downloading an app that loads recovery for me but when I tried that I got a "no command" screen with a little green robot.
From what I've read, it's possible I didn't flash my trwp properly? I don't know how this is possible since I just rooted my phone. I would appreciate some help, I'm afraid to take any random guesses at the risk of ruining my phone. Sorry if I'm missing something obvious or not giving enough info, I'm not very tech savvy.
Click to expand...
Click to collapse
If you are trying to flash twrp recovery on your android then rename your twrp to recovery.
Boot your android in fastboot mode,
Navigate to folder that you have recovery. Press shift and right click and click on open command here and type "fastboot devices" and enter
"fastboot flash recovery recovery.img
It flash your recovery to your android.
Ashwinrg said:
If you are trying to flash twrp recovery on your android then rename your twrp to recovery.
Boot your android in fastboot mode,
Navigate to folder that you have recovery. Press shift and right click and click on open command here and type "fastboot devices" and enter
"fastboot flash recovery recovery.img
It flash your recovery to your android.
Click to expand...
Click to collapse
Did all that, getting:
(bootloader) slot-count: not found
(bootloader) slot-suffixes: not found
(bootloader) slot-suffixes: not found
(bootloader) has-slot:recovery: not found
error: cannot load 'recovery.img'
Also, per the suggestion of other users on these forums, I tried to hold down power and press volume up during the "no command" screen after attempting to enter recovery. That sent me into Android Recovery but it's not the twrp platform I used when originally rooting my phone.
How did you unlock the bootloader? have you tried: fastboot oem unlock?
You need to "allow oem unlocking" on developer options (which I guess you already did). Then reboot in bootloader: (a) adb reboot bootloader. In fastboot, you need to unlock the bootloader first: (b) fastboot oem unlock (or unlock-go). Then you can try to flash that recovery.img: (c) fastboot flash recovery "name of the file.img"
edit: fastboot oem unlock restores the device to factory settings. You need to configure and enable again "usb debugging" and "oem unlocking" (which are disabled by default). You can then proceed to fastboot flash
Hi, My Nokia 1 (TA-1047) is now in "No Command" mode.
I installed TWRP recovery previously and tried to root but failed. Then I installed stock recovery and phone started normally. As the phone started normally, I locked OEM through Fastboot mode and disabled OEM unlocking from "Developer Option".
But while installing "system update" from "Settings", it showed error and went to "No Command" mode.
Now I'm unable to flash anything through Fastboot mode because the OEM is locked. Also I'm unable to change OEM unlocking from "Developer Option" as the phone is not starting.
Is there any option to unlock OEM without the help of "Developer Option"?
salmanvai said:
Hi, My Nokia 1 (TA-1047) is now in "No Command" mode.
I installed TWRP recovery previously and tried to root but failed. Then I installed stock recovery and phone started normally. As the phone started normally, I locked OEM through Fastboot mode and disabled OEM unlocking from "Developer Option".
But while installing "system update" from "Settings", it showed error and went to "No Command" mode.
Now I'm unable to flash anything through Fastboot mode because the OEM is locked. Also I'm unable to change OEM unlocking from "Developer Option" as the phone is not starting.
Is there any option to unlock OEM without the help of "Developer Option"?
Click to expand...
Click to collapse
Edit. Okay, ignore most of what i said down there as after re-reading your post you seem to have a grasp on fastboot, the no command bit still applies though i think
"No Command" mode
If your talking about the recovery with the android image in the background, then there might still be hope, for some reason, the recovery starts up in this mode, showing the "no cammand" message, its fiddly, but you have to press the power button and either volume up or volume down repeatedly, in the end i was button spamming all the buttons and eventually the recovery menu showed up. Carefull to stop pushing buttons when the menu shows up as the buttons are how you navigate(v+,v-) and choose options(power button)
Whether that gives you any options i dont know, you could try a factory reset from the recovery menu, i suppose, or try the posted ota in the other thread if nokia has`nt released official firmware, although im not sure if you can use stock recovery to flash unofficial firmware, best bet is to try and boot into fastboot and use adb on another computer to flash the firmware that way, assuming the firmware files are available.
Most android devices have a way to boot into recovery or fastboot/bootloader using hardware keys
Quick google found this (works?)
Power off
Connect Micro USB to computer.
"In the next step hold down Volume Down + Power key for a short while"
Let go of the buttons when fastboot comes up
Using the computer with adb installed, go to a command terminal and type "fastboot devices" without quotes, you`ll know everythings working if your the device is listed in terminal after typing that command. From there look up fastboot flashing firmware or something to that extent, this is assuming you managed to find the correct firmware for your device and have it stored in your computer
I`d be real carefull here with fastboot, flashing wrong image file could make things much worse, at least it seems you can boot to recovery, so hopefully a factory reset fixes things, use fastboot as last resort i.e if its new job is a paperweight, as i dont think theres any particular guide on doing this specifically for the nokia 1, but i havent checked thouroughly so i could be wrong, take a look and see..............
And let us know if/how you managed to get it working
Goodluck
I had my OPX running nicely with TWRP bootloader and AOSIP 8.1 rom, and then I went and relocked the bootloader with "fastboot oem lock" command. Now it just vibrates and flashes up the OP logo and "powered by Android" screen, and continuously reboots. Only thing I can do is hold the power button till it turns off. Holding the vol down button and power buttons aren't getting it back into fastboot state. What's the best way to recover from this state? Kind of hoping it's as simple as getting back in somehow and "fastboot oem unlock"?
OK, managed to recover it by getting into fastboot and unlocking the bootloader again. Bit of a relief. "Fastboot oem device-info" is now reporting device tampered as true, it was previously saying false. Is this different to being rooted? When I run a root check app it says the device isn't rooted. Everything is working fine apart from the Barclays banking app, which it seems is very fussy about non standard firmware, unlocked bootloaders, and having TWRP installed. Is there any way to make it happy? Kind of frustrating to loose that, all my other online banking apps work.
Did you tried with Magisk activating the Hide option for the Barclay's app?
Kéno40 said:
Did you tried with Magisk activating the Hide option for the Barclay's app?
Click to expand...
Click to collapse
No, not yet. I've been reading about it on XDA, but seems a bit hit and miss whether it Magisk can fool the latest Barclays app?
I also have another OPX (my current main phone) running stock Oxygen 2.2.3/Android 5.1.1. Bootloader is locked and it's not been rooted. I would really like to transfer all my saved wifi network passwords over to another device. They don't seem to go into google backup from the OPX, and I'm struggling to find another way to get them off without rooting. Obviously, I can't unlock the bootloader because it'll wipe everything off the phone. I did try Kingroot out of desperation (seems to be the only way to root with bootloader still locked?), but even that wouldn't install. So I'm stuck on that as well.
One Plus X reboots continuously and able to enter only fast boot mode
Hi My One plus X is now rebooting continuously and able to enter only fast boot mode. I tried unlocking boot loader but where the OEM Unlocking option is disabled in settings. Now unable to switch on mobile. Please help in getting out of Fast boot mode and switch on normally.
Tried pressing volume down+ power key
Volume up + power key enters only fast boot mode.
surya_vs said:
Hi My One plus X is now rebooting continuously and able to enter only fast boot mode. I tried unlocking boot loader but where the OEM Unlocking option is disabled in settings. Now unable to switch on mobile. Please help in getting out of Fast boot mode and switch on normally.
Tried pressing volume down+ power key
Volume up + power key enters only fast boot mode.
Click to expand...
Click to collapse
Noob Guide:
1. Download latest TWRP on computer.
https://dl.twrp.me/onyx/twrp-3.2.3-0-onyx.img.html
2. Download minimal adb tools and install it (Folder installed at C:\ProgramFiles\Minimal ADB and Fastboot)
https://forum.xda-developers.com/showthread.php?t=2317790
3. Transfer Twrp file to 'minimal adb and fastboot' folder.
4. Switch to fastboot in mobile by pressing "vol up + power"
5. Connect to PC using usb cable
6. Press "Shift" and right click in 'minimal adb and fastboot' folder, click on "open powershell(cmd) window here"
7. Type " ./fastboot devices "( it should show you fastboot serial number)
8. If bootloader is locked, unlock it by typing " ./fastboot oem unlock "
9. Install twrp by typing " ./fastboot flash recovery twrp-3.2.3-0-onyx.img "
10. Boot into twrp by typing " ./fastboot boot twrp-3.2.3-0-onyx.img "
11. If TWRP shows up,
Download your favorite desired Custom ROM (my fav any Oreo ROM) on computer and transfer it onto your mobile.
Download Gapps(any package nano,stock etc..) and transfer it to mobile.
12. In TWRP goto
Wipe >> swipe to factory reset
Advanced wipe >> select "System,Cache,Dalvik Cache" and wipe it
13. In TWRP goto
Install >>select ROM,gapps>>flash it.
14. Reboot
That's it.:laugh:
---------- Post added at 12:54 PM ---------- Previous post was at 12:41 PM ----------
mike-b said:
OK, managed to recover it by getting into fastboot and unlocking the bootloader again. Bit of a relief. "Fastboot oem device-info" is now reporting device tampered as true, it was previously saying false. Is this different to being rooted? When I run a root check app it says the device isn't rooted. Everything is working fine apart from the Barclays banking app, which it seems is very fussy about non standard firmware, unlocked bootloaders, and having TWRP installed. Is there any way to make it happy? Kind of frustrating to loose that, all my other online banking apps work.
Click to expand...
Click to collapse
Check the above guide to solve your issue.
Guide to use banking apps on custom roms.
1. Flash latest Magisk in TWRP and install Magisk manager.
2. Open up Magisk >>Magisk hide >>Choose app(ex: Google pay:Tez.. etc).
3. Magisk >> Settings>> Hide Magisk manager
4. Apps>> Google Play services >> Permissions >>Turn off telephone or phone permission.
5. Apps>> Google Play store >> Permissions >>Turn off telephone or phone permission
6. Login to banking app.
7. Viola!! Done and done.
Hope this helped.:laugh: