This isn't my first rodeo in the root world and I'm usually more careful when I know I won't have a custom recovery for awhile.
Well after using Stump Root everything was working fine and normal and then I pushed GTA III over to my applications because it wouldn't install.
I got a boot loop on the Sprint Spark animation. Downloaded the tot for zv4 aswell as the dll file. and it runs fine on the LG Restore tool but then boots into MiniOS and shows "Factory Reset 2"
Anyone got any ideas on how to fix this? I've looked everywhere for solutions on the G3 and even looked around on the G2 and no solutions.
Steps!
1 Download LG Flash Tool and LG Drivers
2. Download the tot and dll file for your devices.
3. Boot Into Download Mode(Power + Volume up when the LG screen Pops up press those keys again)
4. Open the Command Line and type devmgmt.msc and look for com and switch your G3 to port to 41.
5. Open LG Flash Tool and Put your dll and tot files in and use Board DL not Update DL(Very Important or you'll boot into MiniOS with a "Factory Reset Status 2" screen.
6. Start the tool with your phone plugged in. when It says ready unplug and replug your phone in. It'll run for awhile
7. It should boot into MiniOS just hit ok. Push power button plus touch the screen where it says Normal boot+(power)
8. Profit???
Where can i download the tot file sir i saw one but the link is dead
OMG this WORKS!!!!!!!!!!!!!!!!!!!! after trying so many crap. I almost gave up. THANK YOU!!!
help me please
i actually am stock with my lg g3 AS990 in factory reset status 2 i need help very bad please anyone
thnkx to u...u saved my life...but em in pakistan and my device dont show me the sim signals....before unrooting to stock my device runs D850 software and shows the netwrk signls...now what should i do to get back my netwrk signals...plz help me
Thanks, this worked great for me! Only problem now is that the Google "Verify your account, this device was reset" notification still comes up... ugh.
It work!
Thank you! I have fixed "Factory Reset Status 2" problem
Awesome !! this works for sure
After a long delay
Damn, I followed every guide to get my phone to finally reboot, this one explained exactly what was missing in every other post.
Push power button plus touch the screen where it says Normal boot+(power)
i have Factory Reset Status 2 in lg g5
how can i fix it
thank you soo much this worked
Related
Hi, i've a strange (but i hope common and resolvable) problem.
After all, i say that i searched through the forum (with the search function) but with the solution that i found and tried i didn't solve anything.
I start saying that i got a p500 with a broken sdcard reader board (it simply doesn't have a microsd 'cause doesn't recognize).
That phone some days ago just shut down and went stuck on the LG Logo.
I tried at first the hard reset (home+vlm down+pwr), nothing happens.
I tried then the recovery mode and try to update with lg updater, and didn't work, lg doesn't recognize the phone on the updater (but on the main screen of the BBc app does).
After some tries, (dumb tries, for example leaving it without battery for some hours), and searching, i did two ways:
-KDZ Firmware update way, selecting 3gqtc and diag on lg logo, or recovery (and recovery sc) on recovery screen, nothing done.
-LGMDP for installing fastboot and CWM and v20e. It completes the operation but nothing changes, the lg is still stuck on the lg logo.
The last thing that i noticed is that one time, powering on the phone, button's leds flashed about 4-5 times. but if i try to re-do the action, doesn't get anymore.
I would know if there is another way to exit from this stuck-screen.
I hope opened the topic on the right section.
faglmt said:
-KDZ Firmware update way, selecting 3gqtc and diag on lg logo, or recovery (and recovery sc) on recovery screen, nothing done.
Click to expand...
Click to collapse
When you say recovery and recovery sc, you mean EMERGENCY and CS_EMERGENCY, right?
So, you tried selecting these options while on the black menu of recovery (like the Clockworkmod one) or on the yellow screen saying Emergency Mode!! ?
In case you were on the recovery, try the following: remove the battery and, while holding the volume up and back keys, connect the phone to USB. After that, try using KDZ selecting EMERGENCY.
But in the case you were correctly on the emergency mode and just used the wrong words here, then I'm sorry but I don't know what else you could try to solve your problem (wait and see what other ideas people will come up with).
When you say recovery and recovery sc, you mean EMERGENCY and CS_EMERGENCY, right?
Click to expand...
Click to collapse
Yup, sry it's late night and i got confused with words.
I'm can go on the yellow screen and "EMERGENCY MODE" is texted on center.
And on KFC Used both modes of emergency (even diag).
I tried to do this without battery, but the result is the same. When it reboots stucks up on the lg logo. =(
Uh, i forgot to post the errors of kdz:
Upgrade error
WParam: 100
LParam: 500
Here is the log: http://pastebin.com/4SECdaT4
Hello. I'm new to the forum, and the issue that brought me here as had me fulling my hair out of the last three days.
I'll try my best to make this short as possible. I have (obviously) AT&T Lg Optimus G (E970) that was running 4.0.4. i rooted and unlocked it and flashed a cm 10.1 using TWRP. Yesterday tried to flash a zip for a transparent status bar mod. But the flash resulted in CM getting stuck on the splash screen. So i booted in TWRP recovery mode to restore from a recent backup. In the midst of wiping my rom and going to restore, i guess my phone died (which was weird because it had a substantial charge). Then it would no longer power on, and the only was i could get ANY response was by plugging it on the charger. All i get it the red indicator light. my phone will only turn on when plugged into the computer. from there the only two thing i can do is enter download mode and boot. and when i try to boot, i will get the lg logo for a moment and the the screen cuts out and goes back the the flashing red light.
so I trien the LGNPST method.
i downloaded the auto LGNPST and installed just fine. downloaded teenybin and lg stock bin. i've tried to flash both (put phone into download mode, select the dll and select the bin file). what happens is everything starts off fine, then when it gets to 67% the phone reboots, then goes back to the flashing red indicator light, and a message on LGNPST will pop up saying the phone has been disconnected, and to reconnect to continue. so i'll unplug the phone, plug it back in, and put it in download mode, and hit continue. LGNPST will say complete but the phone will still be just sitting in download mode. and if i unplug it, it's goes back to square one (red flashing indicator light)
EDIT: i was flashing the v11c stock bin. i just flashed the v20j bin and now we're boot looping while plugged in (lg logo for about 2 seconds, shut off, repeat) progress???
SO SO SORRY FOR THE LONG READ. Just trying to give as much info as possible hoping it helps.
My question is, is this a hard or a soft brick, and do i have any options left? after researching on here i'm hoping JTAG isn't my only option (I don't have the time or funds to go that route) and i saw someone mention taking it back to at&t, butIi don't think that would help me any since rooting the phone voids the warranty, correct?
I'd be eternally grateful for ANY advice. i'm at my wits end, and i've been google researching this for so long i'm starting not to even comprehend what i'm reading. PLEASE HELP!! And thank you so much in advance.
goplatinum said:
Hello. I'm new to the forum, and the issue that brought me here as had me fulling my hair out of the last three days.
I'll try my best to make this short as possible. I have (obviously) AT&T Lg Optimus G (E970) that was running 4.0.4. i rooted and unlocked it and flashed a cm 10.1 using TWRP. Yesterday tried to flash a zip for a transparent status bar mod. But the flash resulted in CM getting stuck on the splash screen. So i booted in TWRP recovery mode to restore from a recent backup. In the midst of wiping my rom and going to restore, i guess my phone died (which was weird because it had a substantial charge). Then it would no longer power on, and the only was i could get ANY response was by plugging it on the charger. All i get it the red indicator light. my phone will only turn on when plugged into the computer. from there the only two thing i can do is enter download mode and boot. and when i try to boot, i will get the lg logo for a moment and the the screen cuts out and goes back the the flashing red light.
so I trien the LGNPST method.
i downloaded the auto LGNPST and installed just fine. downloaded teenybin and lg stock bin. i've tried to flash both (put phone into download mode, select the dll and select the bin file). what happens is everything starts off fine, then when it gets to 67% the phone reboots, then goes back to the flashing red indicator light, and a message on LGNPST will pop up saying the phone has been disconnected, and to reconnect to continue. so i'll unplug the phone, plug it back in, and put it in download mode, and hit continue. LGNPST will say complete but the phone will still be just sitting in download mode. and if i unplug it, it's goes back to square one (red flashing indicator light)
EDIT: i was flashing the v11c stock bin. i just flashed the v20j bin and now we're boot looping while plugged in (lg logo for about 2 seconds, shut off, repeat) progress???
SO SO SORRY FOR THE LONG READ. Just trying to give as much info as possible hoping it helps.
My question is, is this a hard or a soft brick, and do i have any options left? after researching on here i'm hoping JTAG isn't my only option (I don't have the time or funds to go that route) and i saw someone mention taking it back to at&t, butIi don't think that would help me any since rooting the phone voids the warranty, correct?
I'd be eternally grateful for ANY advice. i'm at my wits end, and i've been google researching this for so long i'm starting not to even comprehend what i'm reading. PLEASE HELP!! And thank you so much in advance.
Click to expand...
Click to collapse
If it is hard bricked when connected to computer it will show up in device manager as QDUSB Device or something similar. You could try to do a factory reset with button combo, be sure phone is powered off then hold power and volume down until menu shows up.
You Can Also Try TeenyBin If Factory Reset Does Not Work
Regards,
acervenky,
XPT
thanks for the reply guys. it looks like my phone is showing up in the device manager under ports as "LGE AndroidNet USB Serial Port (COM3)" is that a good sign? i'm going to try flashing teenybin again.
goplatinum said:
thanks for the reply guys. it looks like my phone is showing up in the device manager under ports as "LGE AndroidNet USB Serial Port (COM3)" is that a good sign? i'm going to try flashing teenybin again.
Click to expand...
Click to collapse
Yes, you are not dead in the water. Proceed, young grasshopper.
Sent from my Optimus G using xda app-developers app
All the custom, unofficial 4.2.2 roms I found on XDA require that you be on the latest LG 4.1.2 OTA.
There are also links to stock rom and kernel so you don't have to mess with LGPT whatever. No need to do OTA etc, if you flash this.
http://forum.xda-developers.com/showthread.php?t=2219953
I also found TWRP to be far easier to install, which is installed by default I think with FreeGee. But you can find thread for the latest TWRP 2.6. TWRP makes flashing and wiping cache/dalvik super easy.
Ok, so i'm starting to think this is a battery issue as opposed to a hardware issue. i could still be wrong. I've flashed the stcok rom after stock rom. When i plug my phone into a computer usb port it LG logo boot loops (and this is the only way i can get to download mode), but when i plug it into the usb wall charger, i just get the red flashing light and no other response. when it's not plugged in i get nothing.It's still showing up as "LGE AndroidNet USB Serial Port" in my device manager and i can still get to dpownload mode just fine, so i know all isn't "according to what i've read and been told". So i'm running out of fixes. I did come accross a thread on here suggesting i unplug the battery and plug it back up. So i'll be getting the tools and praying that works.
I did also come across an interesting thread on another forum. They were saying how id you allowed your battery to drain all the way to true zero (which i think might be possible because my phone died in recovery mode), it wouldn't have enough juice to initiate and monitor the charging process. If this is the case, can the batter be brought back to life? a jump start or something (lol)? or will i have to just replace the battery?
THANK YOU SO MUCH FOR THE HELP SO FAR GUYS.
When you used lgnpst to go to 11c it boot looped because you tried to go backwards from cm. If you did a factory reset afterwards with button combo it should boot. Also can you get into recovery after flashing teenybin to do a reset and flash a ROM?
adfurgerson said:
When you used lgnpst to go to 11c it boot looped because you tried to go backwards from cm. If you did a factory reset afterwards with button combo it should boot. Also can you get into recovery after flashing teenybin to do a reset and flash a ROM?
Click to expand...
Click to collapse
i did a factory reset a few times, but it still never booted. and whenever i LGNPST, when it hits 67% the phone reboots and just starts bootlooping (if i flash a stock rom) if i LGNPST teenybin, at 67% the phone will shut off and the flashing red light will just come up. and after each a message will say phone was unplugged or lost connection. after both instances ill plug it back up and put it in download mode again to finish and it will complete, but the phone will just be sitting there in download mode. and if i reboot.... bootloop city.
i cam across this thread that seems to detail my issue perfectly. so i'm going to attempt a teenybin flash one more time to tryt to get recovery mode (havent been able to get it at all), and if that doesn't work i'm going to do a battery pull..
http://forum.xda-developers.com/showthread.php?t=2261803&highlight=battery
BATTERY UNPLUG WORK LIKE A CHARM. again, i followed the method [r.]GimP laid out here http://forum.xda-developers.com/showthread.php?p=43732147#post43732147
i was nervous because i've never opened my (or any other) phone before.
and thanks to the tot link provided by zymphad above, i'm now running jb 4.1.2
THANK YOU GUYS :highfive:
I found LG's camera lacking, but 4.2 has an update for that, plus the camera mod, much improved I think.
Running RootBox great now with 124mhz idle, GPU downclocked to 200 and CPU undervolted to 85, stable and cool. I don't 3d game on phones.
Glad you fixed it, I just hope someone makes a high capacity internal battery for us since taking it apart isn't that difficult.
Sent from my Optimus G using Tapatalk 4 Beta
SOLVED
I've been able to debrick the phone! It's difficult to reproduce the steps, but it goes something like this:
- Being that the phone rebooted by itself [with battery on] the flashing process could never be completed successfully. So I noticed that the phone kept powered on when the battery was removed and it was connected to the micro USB. So I used LG Flash Tool 2014, and as soon as the process started (after selecting the KDZ file > CSE Flash > START > OK) I connected the phone, with the battery removed. The process started and had a
"Connection to Server failed. Try again in a moment."
Click to expand...
Click to collapse
error, which I ignored, so the flashing process went on background. Then it said there was an error and give me the option to retry. I did. The process started again, reaching 99%. Then the phone restarted and the perennial "Download mode" was gone! The Android with a charging bar below appeared. I put back the battery on the phone and after a few reboots more it was back on KitKat :victory:
Hope this helps someone else in the future. It made me sweat
____________
Hi. I've a LG L30 Sporty, also known as LG D120g. I've been using the phone and a day, three weeks ago, I had the brilliant idea of trying to flash Injector with Flashify.
The phone was rooted, running stock Android 4.4.2 and without any other issues. I have never been able to use the stock recovery (except for factory reset) because strangely the font exceeds the screen limits and the menu is illegible.
Now, the reason because I say it's "hard bricked" is because, at the moment, the only two things which the phone can do is freezing on download mode, and "factory hard reset" with VOL. DOWN + POWER BUTTON, and the POWER BUTTON once. The factory hard reset is confirmed, and only returns the phone, without rebooting, to the download mode.
I have tried ADB and LG Bridge, but none of them detect the phone. I've two firmware: D120AR10B_00.kdz and D120G10A.kdz. But (only tried once) now the phone is in a boot loop! It cycles every 40 seconds, taking with the dark screen to boot (or reboot) and 20 in download mode.
Well, any ideas? I've given up, but now my father could use the phone and I thought of asking around.
Firstly it is not HARD-BRICK
Its is just boot-loop aka (soft-brick)
Now its solution
1-USB Drivers (your device)
2-LG Flash tool / KDZ Updater
3-Stock ROM (other necessary file).
Try flashing it with stock ROM, and still your having boot-loop Don't worry do a factory reset and than good to go.
Instruction Link : Click HERE
Also If you need any help please do reply to my post, So that I can receive notification and reply you.
NOTE: The link which I provided you is others work. So, I and XDA COMMUNITY doesn't hold any responsiblity if you end up in great problem. We are here to help you and guide you.
Salman
(If I helped you, Don't Forget to click on Thanks)
Salman Al-Badgail said:
Firstly it is not HARD-BRICK
Its is just boot-loop aka (soft-brick)
Now its solution
1-USB Drivers (your device)
2-LG Flash tool / KDZ Updater
3-Stock ROM (other necessary file).
Try flashing it with stock ROM, and still your having boot-loop Don't worry do a factory reset and than good to go.
Instruction Link : Click HERE
Also If you need any help please do reply to my post, So that I can receive notification and reply you.
NOTE: The link which I provided you is others work. So, I and XDA COMMUNITY doesn't hold any responsiblity if you end up in great problem. We are here to help you and guide you.
Salman
(If I helped you, Don't Forget to click on Thanks)
Click to expand...
Click to collapse
First of all, thanks for your quick response.
I don't know if it's relevant, but the phone is effectively rebooting every 40 seconds. Can a firmware be flashed like that?
Anyway I've tried. The flashing process reachs the third stage, the one with the phone and the up arrow when the software extraction in progress completes, and then there are 2 dead-ends: 1) A window which says
Connection to server failed.
Try again in a moment.
Click to expand...
Click to collapse
And when I close it, I disconnect the phone and remove the battery, press VOL. UP and connect and put the battery on, and the phone starts again and I click "Retry". LG Flashing Tools says "Verifying phone connection..." and then "S/W Upgrade is in progress", but it never goes beyond %11. I believe that it is because of the boot loop =/
If I could only stop it...
Post your question here, some expert might help you.
Check HERE
I'm giving it a bump. Just once.
Any idea? I'll try anything (I think I had already, but maybe...)
NEWS:
On fastboot I can't list the device on it, or at least I couldn't yet. I've, however, noticed that the phone is detected by the computer.
When it's on download mode there are 3 new devices: 1) USB Composite Device 2) LGE AndroidNet USB Modem 3) LGE AndroidNet USB Serial port (COM13)
I've stabilized the reboot cycle by taking the battery out when connected to the computer. Somehow the USB cable seems to power the phone independently from the battery circuit.
Please help,
I have stock rom rooted LG l70 d320. It works propperly but now I applied exposed module called "Commandr for Google Now
", then rebooted but...
Phone just started vibrating every second once, but screen was still black.
It continues about 10 minutes and still same...
Than i pull out my battery and place it back. Again it start vibrating but nothing more.
I tried to hard reset (volume down and power button), but it only stopped vibrating for the while.
And I tried to connect to PC (i want ro flash stock rom)too, but PC cant detect my device. So I cant use ADB to recovery
Thank you in advance for your answers.
Follow this
Follow this steps as indicated in my post. you'll need the data cable/pc cable came with your phone
https://forum.xda-developers.com/android/help/help-bootloop-lg-l70-d320-t3304382#post70962321
Hi,
I have Ls 990 rooted, twrp 2.8 with bump, cloudy rom2.5.
I was trying to get gsm bands working as this is a cdma phone with Sprint.
I was connected to usb, QPST server, and QXDM PRO at the time reading nv values etc.
I stopped working on it for awhile. Then came back. Read some more on my google. I wanted to see what cell connections I was getting related to the band and frequency. So I thought I would go into hidden menu. The phone was still connected to the usb but I don’t think this matters (?). I tapped on “device test”. It says AAT must start. I tap “ok”. The phone reboots but then gets stuck in the lg logo mode. I try to reboot again by holding down the power button to try and get into the hidden menu “mini OS” but it will never come up. I know others have gotten stuck here but the mini OS window pops up allowing them to reboot in “normal mode” but mine never gets there.
So I booted into twrp recovery and did a restore to my recent backup with a reboot but still stuck on lg logo. So I went back and wiped dalvik cache, cache and did a restore of same most recent restore point. Same thing with reboot it gets hung up on the lg logo forever.
I know there is a way to fix this, I just need some help or ideas to try.
Thank you.
Must be a way. Please help.
Thanks.
Solved. Had to do a factory rom flash with lg flash tool. Then stump, twrp bump, supersu, cloudy.
Back to where I was but learned even more now. Need to unlock the bands through QXDM. If there’s someone that’s done this I’d appreciate help.
Thanks.
Ps...interestingly once I rebooted after the factory rom flash the mini os window with AAT opened and allowed me to press power button and select normal reboot. It got hung up on AAT and caused this boot loop. Crazy.