According to post #5310 on this link I have a corrupt data partition stopping me from doing a nandroid backup on Philz Recovery
http://forum.xda-developers.com/showthread.php?t=2201860&page=531#post54914099
How do I go about fixing this?
Thanks
Try this: Advanced->Fix permissions
broken920 said:
Try this: Advanced->Fix permissions
Click to expand...
Click to collapse
Excuse my noob ness but I can't see that in Philz Recovery
I thought there was in Philz...flash TWRP or CWM and you'll find it
broken920 said:
I thought there was in Philz...flash TWRP or CWM and you'll find it
Click to expand...
Click to collapse
I take I just flash a zip version then go back to recovery?
Yes, flash zip version and reboot in recovery.
broken920 said:
Yes, flash zip version and reboot in recovery.
Click to expand...
Click to collapse
Don't suppose you have a link please. Thanks
Anyone else help at all? I'm running the latest version of Philz touch. It can't be the recovery that's the problem.
How do I fix this?!?!
Here you are: TWRP, CWM
mike710_0 said:
How do I fix this?!?!
Click to expand...
Click to collapse
Flash PIT file
verny94 said:
Flash PIT file
Click to expand...
Click to collapse
Can you be more specific please on how/link/what to do?
broken920 said:
Here you are: TWRP, CWM
Click to expand...
Click to collapse
Still doesn't have fixed permissions in that certain of Philz touch
Here's a screenshot of the failed nandroid backup
mike710_0 said:
Can you be more specific please on how/link/what to do?
Click to expand...
Click to collapse
Install TWRP or CWM from zip that i've linked and reboot in recovery...go to "advanced" and you'll see "fix permissions" :highfive:
broken920 said:
Install TWRP or CWM from zip that i've linked and reboot in recovery...go to "advanced" and you'll see "fix permissions" :highfive:
Click to expand...
Click to collapse
I've done that. It's not there!
This is the rom I'm running. It's a galaxy s5 based rom.
http://forum.xda-developers.com/galaxy-s3/development/rom-galaxy-s5-mini-12-edition-buy-s5-t2669724
The annoying thing is I've got 2 phones running the exact same rom etc and I can make nandroid backups on mine but not on my wife's
i'm sure that in CWM there must be "fix permissions"...it's impossible there isn't!
Have you got any trouble with your wife's S3 or that rom works fine?
broken920 said:
i'm sure that in CWM there must be "fix permissions"...it's impossible there isn't!
Have you got any trouble with your wife's S3 or that rom works fine?
Click to expand...
Click to collapse
Cheers for your reply
Just re checked Philz touch and can confirm 100% fixed permissions is not there, anywhere
When I install this rom it installs using aroma. I'm just wondering if that's causing the problem as previous roms I flashed were solely installed by Philz Touch
Rom seems more or less the same. I flashed both phones in the exact same way so don't understand how one can't backup. I need to backup incase anything goes wrong.
To be honest I want a TW rom that works 100% all the time! I just really like the look of the S5 rom. Most of these S5 roms after a week or two start slowing down and become unusable
it's very strange...i dont' really understand
Have you ever tried Imperium KitKat? I've it from 2 weeks and works fine: pretty fast, stable and good battery life with boeffla kernel.
here's the 3D link: http://forum.xda-developers.com/galaxy-s3/development/rom-t2842856
broken920 said:
it's very strange...i dont' really understand
Have you ever tried Imperium KitKat? I've it from 2 weeks and works fine: pretty fast, stable and good battery life with boeffla kernel.
here's the 3D link: http://forum.xda-developers.com/galaxy-s3/development/rom-t2842856
Click to expand...
Click to collapse
Yeah I saw that. Might try it. Will see how I get on with this first. So no ideas how to fix this? I always run a 'mega wipe' zip before every flash of a rom. Can I do anything else to completely remove everything so the problem with backup is gone?
You can try doing deep clean to fix your problem and remove everything from your wife's S3.
I always do full wipe and format partitions system and preload before flashing new rom.
Inviato da Tapatalk da Samsung Galaxy S3 GT-I9300
Related
Hello
I've accidentally flashed a wrong cwm-recovery (meant for some other phone)
After the installation I've rebooted into recovery and it booted the one I already had (that's when I understood it's the wrong one)
Then I've tried to reboot back to my rom but it got stuck on the rom's loading screen
Tried to flash a new rom after using gs2RomWipe
Tried to restore from a nandroid backup
all of them gave the same result.. stuck on the loading screen
Now to my question...
If I flash a stock Rom via Odin.. will it be enough? will I be able to reroot and use my phone normally again?
Or is there an easier way maybe?
i did the same today..
all the time bootloop..
flashing same rom that i was using did not helped..
flashing some other rom helped but cant call cause phone dont see simcard..
flashing some other roms like cyanogenmod also stuck my on bootloop..
I am pretty sure you have to flash via odin.
Update...
I've flashed a stock rom via Odin but it went into a bootloop
when I've entered recovery it said E:failed to mount efs (invalid argument)
so far I've found no way to make the phone work
please help
PureMind0 said:
Update...
I've flashed a stock rom via Odin but it went into a bootloop
when I've entered recovery it said E:failed to mount efs (invalid argument)
so far I've found no way to make the phone work
please help
Click to expand...
Click to collapse
If you are using i9100.
Then flash philz kernel via odin.
Then boot into recovery.
MOUNT usb storage
Place any rom zip in the root of ex sd card
Flash it with full wipe
Sent from my GT-I9100 using Tapatalk 2
corruptionfreeindia said:
If you are using i9100.
Then flash philz kernel via odin.
Then boot into recovery.
MOUNT usb storage
Place any rom zip in the root of ex sd card
Flash it with full wipe
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
It doesn't work...
stock rom wont start, restored nandroid wont start, philz + new rom wont start
I have efs backup as tar.gz but didn't find a normal guide on how to use it without the phone working (i.e adb)
I'm not even sure if the problem is because of the efs missing or not but it seems to be the problem
PureMind0 said:
It doesn't work...
stock rom wont start, restored nandroid wont start, philz + new rom wont start
I have efs backup as tar.gz but didn't find a normal guide on how to use it without the phone working (i.e adb)
Click to expand...
Click to collapse
Ok.
Lets make it clear.
After flashing philz which rom did u flash?.
U should have not got any problem.
Sent from my GT-I9100 using Tapatalk 2
corruptionfreeindia said:
Ok.
Lets make it clear.
After flashing philz which rom did u flash?.
U should have not got any problem.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
I've flashed ReVolt JB version
the result was the same as any other method I've tried so far..
stuck on loading screen / bootloop
PureMind0 said:
I've flashed ReVolt JB version
the result was the same as any other method I've tried so far..
stuck on loading screen / bootloop
Click to expand...
Click to collapse
Ok.
Do this.
Boot into recovery
Wipe cache
Wipe dalvik cache
Factory reset/wipe data
Format system
Format preload
Format data
Install philz kernel
Boot into recovery
Select wipe data/factory reset-clean to install a new rom
Install any custom stock rom like neat rom, vivekrom , biftor (choose any one)
Reboot
I assume you are using gti9100
Report back.
Sent from my GT-I9100 using Tapatalk 2
corruptionfreeindia said:
Ok.
Do this.
Boot into recovery
Wipe cache
Wipe dalvik cache
Factory reset/wipe data
Format system
Format preload
Format data
Install philz kernel
Boot into recovery
Select wipe data/factory reset-clean to install a new rom
Install any custom stock rom like neat rom, vivekrom , biftor (choose any one)
Reboot
I assume you are using gti9100
Report back.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
I did everything you said. installed Bitfor rom
got the same result.. still stuck on loading screen
Thanks a lot for your help it's much appreciated
hope I'll be able to solve this somehow
PureMind0 said:
I did everything you said. installed Bitfor rom
got the same result.. still stuck on loading screen
Thanks a lot for your help it's much appreciated
hope I'll be able to solve this somehow
Click to expand...
Click to collapse
First boot takes 5/7 min.
Wait
Sent from my GT-I9100 using Tapatalk 2
corruptionfreeindia said:
First boot takes 5/7 min.
Wait
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
still nothing...
and it usually takes 1-2 mins max for me
also doesn't explain why stock from odin wont work
It seems to me that I need to somehow fix the efs folder but no idea how to do that
almost all the guides I've seen about that requires the rom to work and use root explorer
the others wasn't clear enough or just not related
according to the shell commands my efs folder is empty
copying the efs folder I have on my sdcard doesn't help because it's not there after reboot
I have a tar.gz as well but not sure how to use it
can I flash the .tar via odin? or some other solution with adb/shell?
or do you think it has nothing to do with my problem?
anyone have any idea how to help me???
I've tried many different ways but my device just wont make it past the loading screen of the rom (doesn't matter which one)
I really have no idea what can cause this problem
thought that flashing stock rom via Odin should fix it but it doesn't help
I've tried some methods I've seen to fix efs problems but so far nothing helped
I'm really desperate at the moment :\
download mode and flash the cwm kernel via Odin should work.
Sent from my GT-I9100G using xda app-developers app
i am facing exact same problem
and it also start with flashing cwm for kitkat
nothing working now stock or custmised rom
hope some one can help us to fix it
Any more ideas??
If I take it to my carrier company, will they be able to make it work with their official rom?
PureMind0 said:
Any more ideas??
If I take it to my carrier company, will they be able to make it work with their official rom?
Click to expand...
Click to collapse
i take it to the repair shop they told me they can repair it with some kind of box which will reflash the rom.
i will get it back tomorrow
hope it work
casperusm said:
i take it to the repair shop they told me they can repair it with some kind of box which will reflash the rom.
i will get it back tomorrow
hope it work
Click to expand...
Click to collapse
Good luck!
I should send mine tomorrow and hopefully they can fix it
update when you get yours back
casperusm said:
i take it to the repair shop they told me they can repair it with some kind of box which will reflash the rom.
i will get it back tomorrow
hope it work
Click to expand...
Click to collapse
Did you get your device fixed?
OK.....just a quick thing......Odin flashing a normal single file stock firmware *may* not be the solution as it just overwrites what is already there during the flash. I will provide a link to a three part firmware that wipes the old as it flashes.....this essentially flashes the firmware onto 'pristine' memory partitions....it *might* help......
Here's the link.....
http://www.mediafire.com/?1z5ao5b6r594x45
Search for @Hopper8s Odin troubleshooting guide for instructions on how to flash it.....
Good luck.....
This might be my S2, or it might be my W...but it's definitely CM
hey guys, so iv browsed and browsed and i still cant find an answer...every time i try to flash a new rom to my verizon note 2 using twrp i get an error and then it just goes back to the rom im currently on which is jedix..is there ANY way that i can flash a rom to my phone from my computer i want to get something like cm11 please help!!!
zaksween said:
hey guys, so iv browsed and browsed and i still cant find an answer...every time i try to flash a new rom to my verizon note 2 using twrp i get an error and then it just goes back to the rom im currently on which is jedix..is there ANY way that i can flash a rom to my phone from my computer i want to get something like cm11 please help!!!
Click to expand...
Click to collapse
What version of TWRP are you on? Sounds like you need to update to the latest version.
jcollier said:
What version of TWRP are you on? Sounds like you need to update to the latest version.
Click to expand...
Click to collapse
well i tried updating it a while back and it was no help...do you know of a way i can just flash a new rom to my phone without going through twrp?
zaksween said:
well i tried updating it a while back and it was no help...do you know of a way i can just flash a new rom to my phone without going through twrp?
Click to expand...
Click to collapse
You could switch to CWM or Philz touch recovery.
jcollier said:
You could switch to CWM or Philz touch recovery.
Click to expand...
Click to collapse
and how might one go about doing that? thanks so much for the help your giveing
zaksween said:
and how might one go about doing that? thanks so much for the help your giveing
Click to expand...
Click to collapse
You can download the zip file here -> http://forum.xda-developers.com/showthread.php?t=2552655
Then reboot into recovery. Then flash the zip like you would any other. When you reboot to recovery, you will have a new recovery.
jcollier said:
You can download the zip file here -> http://forum.xda-developers.com/showthread.php?t=2552655
Then reboot into recovery. Then flash the zip like you would any other. When you reboot to recovery, you will have a new recovery.
Click to expand...
Click to collapse
alright thank you and ill let you know how that turns out!
jcollier said:
You can download the zip file here -> http://forum.xda-developers.com/showthread.php?t=2552655
Then reboot into recovery. Then flash the zip like you would any other. When you reboot to recovery, you will have a new recovery.
Click to expand...
Click to collapse
wait do i flash it through odin....the .tar.md5? or how?
zaksween said:
wait do i flash it through odin....the .tar.md5? or how?
Click to expand...
Click to collapse
See my above instructions. It is a zip file that you flash in recovery so there is no Odin involved.
jcollier said:
See my above instructions. It is a zip file that you flash in recovery so there is no Odin involved.
Click to expand...
Click to collapse
ya when i flash it just says it couldn't complete...
Hi All,
I recently updated my stock i9100 to CM11 M11 and I want to check if I have done all the steps correctly or if I have missed any steps out.
I first copied these four files onto a micro sd card:
PhilZ-cwm6-XWLSW-XEU-5.06.1-signed.zip
If you are following these instructions then use the correct PhilZ kernel for your stock kernel version. This is explained in the linked post.
ClockWorkMod Recovery v6.0.5.1 - Recovery_CWM_6.0.4.7_I9100.zip
Cyanogen Mod 11 M11 - cm-11-20141008-SNAPSHOT-M11-i9100.zip
Google Apps (Small) - gapps-kk-20140105-signed.zip
Then I:
Boot into stock recovery (volume up+home+power)
Install PhilZ-cwm6-XWLSW-XEU-5.06.1-signed.zip
Reboot into Philz recovery
Do a full Backup including the Preload folder by using the Custom Backup feature
Install ClockWorkMod Recovery v6.0.5.1
Reboot into CWM
Wipe data/factory reset
Wipe cache partition
Advanced>Wipe dalvik cache
Mounts and Storage>Format /system, Format /cache, Format /storage/sdcard0, Format /boot
Install cm-11-20141008-SNAPSHOT-M11-i9100.zip
Install gapps-kk-20140105-signed.zip
Reboot and all done.
Optional Step: Flash a newer modem,
Download XXMS4 modem - modem_XXMS4.zip
Copy above zip file to SD Card
Boot into CWM Recovery and flash the modem zip file
Reboot
I found that the above newer modem slightly improved call quality and mobile download speed.
Note: Do not change RIL.
Have I done everything correctly? Have I missed anything?
I do have two issues,
When I tried - Mounts and Storage>Format /preload - it didn't work. I can't remember what the error was but it woudn't format the preload in CWMR
Memory only shows up as 791MB in About Phone.
Any advice would be greatly appreciated. Thank you very much!
You did well. More than enough.
No need to format partitions, so just ignore the error.
Memory reported is usable memory. It is ok.
Have fun with the new rom.
svbarbosa said:
You did well. More than enough.
No need to format partitions, so just ignore the error.
Memory reported is usable memory. It is ok.
Have fun with the new rom.
Click to expand...
Click to collapse
Thank you for the reply svbarbosa.
I had been putting off installing a custom rom and living with my laggy stock because I thought it would be tricky to install CM11, turned out it was quite simple one I figured out the correct instructions.
I'd advise anyone it give it a try!
When you have time give AOSP NeatRom a try. Is is based on Slim Rom and is the one I use.
Here is the link: [ROM][Sep 25][4.4.4] I9100 AOSP NeatROM.
Happy flashing...
Is it easier (and just as good) to use CyanogenMod Installer to install CM on the i9100?
I made a question yesterday, and would appreciate it if someone could help me:
http://forum.xda-developers.com/gal...import-sms-t2903491/post55985155#post55985155
Thank you guys.
@oldgalaxy hey, just got that i9100 device from my friend with all stock and laggy... ?
Your question was already an answer for me. I always prefer oldschool ways though they are harder. Followed your steps and... voila... Now I'm fast and stable. ??
But I was kinda curious whether it is really easier to install CM with their installer app. ?
Thanks man...
LeroViten said:
@oldgalaxy hey, just got that i9100 device from my friend with all stock and laggy... ?
Your question was already an answer for me. I always prefer oldschool ways though they are harder. Followed your steps and... voila... Now I'm fast and stable. ??
But I was kinda curious whether it is really easier to install CM with their installer app. ?
Thanks man...
Click to expand...
Click to collapse
Thank you @LeroViten, I'm glad that those steps also worked for you. Also now that you have confirmed that it worked for you I am also happy that I have done things correctly, so thank you for that!
Not too sure about the CM installer, but I didn't use it because I wanted to be sure of all the steps I am doing because of the i9100 kernel bug that can hard brick the phone.
oldgalaxy said:
Thank you @LeroViten, I'm glad that those steps also worked for you. Also now that you have confirmed that it worked for you I am also happy that I have done things correctly, so thank you for that!
Not too sure about the CM installer, but I didn't use it because I wanted to be sure of all the steps I am doing because of the i9100 kernel bug that can hard brick the phone.
Click to expand...
Click to collapse
Yep... That was the exact reason for me either. ✌?
Hi,
I also just got a laggy SGS2 from a friend of mine.
And I want to reset/flash the phone in order to give it to my mother, which ROM do recommend CM11 or any other ROM (MIUI ?) ?
I would prefer to have something stable.
For CM, I saw that the last stable img was for CM10.
Thanks in advance.
rayu94 said:
I would prefer to have something stable.
For CM, I saw that the last stable img was for CM10.
Click to expand...
Click to collapse
I've been using CM11 M11 for the last 3 days and have found it completely stable with a slight improvement in battery life over stock.
rayu94 said:
which ROM do recommend CM11 or any other ROM (MIUI ?) ?
Click to expand...
Click to collapse
I don't have experience of any other ROM, but I'd definitely recommend CM11 M11.
oldgalaxy said:
I've been using CM11 M11 for the last 3 days and have found it completely stable with a slight improvement in battery life over stock.
I don't have experience of any other ROM, but I'd definitely recommend CM11 M11.
Click to expand...
Click to collapse
Thanks I will try CM11 M11
hello
may i ask which version of CWM u installed? the thread you linked doesn't have 6.0.5.1 recovery..also your phone Android 4.1.2 before?
Hi, sorry for the late reply.
ghosty81d said:
may i ask which version of CWM u installed? the thread you linked doesn't have 6.0.5.1 recovery
Click to expand...
Click to collapse
It is the zip file, Recovery_CWM_6.0.4.7_I9100.zip, for some reason when you install it, it shows version number 6.0.5.1
ghosty81d said:
also your phone Android 4.1.2 before?
Click to expand...
Click to collapse
Yes, Android version 4.1.2
great!
hey thank you so much oldgalaxy, i updated my i9100 to M11 following your guide, u are the first person on XDA to post a guide for i9100. thank you so much..M11 is awesome! ,just a thought that you don't need flash cwm kitkat compatible over philz cwm? can flash the ROM zip directly from philz cwm? - also i didn't format system and sdcard, just factory reset and wiped cache patrition n dalvik cache. this rom is awesome, ty again
ghosty81d said:
hey thank you so much oldgalaxy, i updated my i9100 to M11 following your guide, u are the first person on XDA to post a guide for i9100. thank you so much..M11 is awesome! ,just a thought that you don't need flash cwm kitkat compatible over philz cwm? can flash the ROM zip directly from philz cwm? - also i didn't format system and sdcard, just factory reset and wiped cache patrition n dalvik cache. this rom is awesome, ty again
Click to expand...
Click to collapse
Thanks for the message @ghosty81d! Glad it worked well for you.
An additional optional step I recently did was to flash a newer modem (don't change the RIL).
I found this slightly improved call quality and mobile download speeds. The modem I flashed was XXMS4.
i have good signal and pretty ok call quality, however, it heats up moderately when using the internet..near the camera, i think i had this problem on stock rom also..signal is good full bars outside. but i wud give the modem a try n I'm completely noob on this topic..what is RIL and how do i flash this? can i flash using cwm? also can i back up my current modem? and changing modem cause any damage to phone? ty oldgalaxy, this m11 rom is good, no need pc, no need root to install it, perfectly fine procedure
WiFi always on on battery status
I'm new here and also decided to leave stock ROM how ever my battery is draining in 4 hours.... And I checkd battery status and WiFi is shwoing activity all the time but is of.... Can anyone help me?
Also if I turn the phone off and don't use the WiFi it doesn't show activity on battery status
Sorry for my english
Thanks
I am ready to install...
I downloaded all the required things to try your steps. I will try it tomorrow.
I just want to know if I need to upgrade the modem or leave it as it is? Kindly confirm.
Thanks,
Sadiq
I wanted to update the OS of my i5500. I first tried the method here but the phone got stuck in bootloop. Then, I attempted to install the version here. Still bootloop. Can you guys help me? I can't use my phone anymore.
Flash the recovery (CWM) again and format /system , /data and /cache . Then flash the packages mentioned in the second link (which is better than the first, if you ask me).
Vagelis1608 said:
Flash the recovery (CWM) again and format /system , /data and /cache . Then flash the packages mentioned in the second link (which is better than the first, if you ask me).
Click to expand...
Click to collapse
Just did it. Still bootloop.
mertcanhekim said:
Just did it. Still bootloop.
Click to expand...
Click to collapse
Try flashing CM11 from madteam.co
I'm having difficulty finding the right version of CM11 for my phone since madteam.co is inaccessable due to database errors. Do you know somewhere else I can download it?
Vagelis1608 said:
Try flashing CM11 from madteam.co
Click to expand...
Click to collapse
Madteam.co is no more
mertcanhekim said:
I'm having difficulty finding the right version of CM11 for my phone since madteam.co is inaccessable due to database errors. Do you know somewhere else I can download it?
Click to expand...
Click to collapse
Found some days ago a mirror, there are links to Google Drive pages with CM11 and Gapps here
http://vinloren.blogspot.it/?m=1
Inviato dal mio Nexus 5 con Tapatalk 2
jacomail95 said:
Found some days ago a mirror, there are links to Google Drive pages with CM11 and Gapps here
http://vinloren.blogspot.it/?m=1
Click to expand...
Click to collapse
Finding update package...
Opening update package...
Installing update...
E:Error in /sdcard/cm-11.0.0-GT-I5500-galaxy5.zip
(Status 0)
Installation aborted.
I did not understand how to use recovery-clockworkmod-6.0.5.2 so I tried installing with ClockworkMod-Galaxy5-v0.7 . Most likely that is why it failed.
What am I supposed to do with recovery-clockworkmod-6.0.5.2 file? It's not in .tar format so Odin does not accept it. The page is not in English and I did not understand.
mertcanhekim said:
Finding update package...
Opening update package...
Installing update...
E:Error in /sdcard/cm-11.0.0-GT-I5500-galaxy5.zip
(Status 0)
Installation aborted.
I did not understand how to use recovery-clockworkmod-6.0.5.2 so I tried installing with ClockworkMod-Galaxy5-v0.7 . Most likely that is why it failed.
What am I supposed to do with recovery-clockworkmod-6.0.5.2 file? It's not in .tar format so Odin does not accept it. The page is not in English and I did not understand.
Click to expand...
Click to collapse
It's flashable. Flash it in recovery. Then reboot into recovery (so that the new recovery gets loaded).
Also, you have to flash it in order to able to use the ROM.
Vagelis1608 said:
It's flashable. Flash it in recovery. Then reboot into recovery (so that the new recovery gets loaded).
Also, you have to flash it in order to able to use the ROM.
Click to expand...
Click to collapse
I understood very little from that. You mean I need another recovery? I know only clockworkmod that is applicable to my phone.
mertcanhekim said:
I understood very little from that. You mean I need another recovery? I know only clockworkmod that is applicable to my phone.
Click to expand...
Click to collapse
You have an old CWM. Using that old CWM install the flashable zip of the new CWM then reboot. Simple
mertcanhekim said:
I understood very little from that. You mean I need another recovery? I know only clockworkmod that is applicable to my phone.
Click to expand...
Click to collapse
Flash clockwordmod-6.0.5.2 in recovery (like a ROM). Then reboot. Then flash the ROM.
jacomail95 said:
You have an old CWM. Using that old CWM install the flashable zip of the new CWM then reboot. Simple
Click to expand...
Click to collapse
Thanks. When you put it that way I understood clearly.
I installed CM11 and this time instead of the word Android the Cyanogenmod logo appeared and for a second I thought it really worked. Then, the scumbag phone decided to go into a bootloop.
:crying:
mertcanhekim said:
Thanks. When you put it that way I understood clearly.
I installed CM11 and this time instead of the word Android the Cyanogenmod logo appeared and for a second I thought it really worked. Then, the scumbag phone decided to go into a bootloop.
:crying:
Click to expand...
Click to collapse
Did you wipe /data after flashing the ROM?
Vagelis1608 said:
Did you wipe /data after flashing the ROM?
Click to expand...
Click to collapse
I wiped data, wiped cache, and wiped dalvik cache all BEFORE flashing the ROM. I was supposed to do it after? Wouldn't that delete the installed data of the ROM?
I tried wiping data AFTER flashing the ROM. It bootloops the exact same way.
mertcanhekim said:
I tried wiping data AFTER flashing the ROM. It bootloops the exact same way.
Click to expand...
Click to collapse
How did you get into recovery?
Vagelis1608 said:
How did you get into recovery?
Click to expand...
Click to collapse
You mean AFTER flashing the Rom? I was already in recovery to flash the Rom so I wiped /data before rebooting. Was I supposed to reboot first?
mertcanhekim said:
You mean AFTER flashing the Rom? I was already in recovery to flash the Rom so I wiped /data before rebooting. Was I supposed to reboot first?
Click to expand...
Click to collapse
No. After the bootloop, how did you get in recovery?
Vagelis1608 said:
No. After the bootloop, how did you get in recovery?
Click to expand...
Click to collapse
1- I loaded clockworkmod 6.0.1.2 with Odin
2- I flashed clockworkmod 6.0.5.2
3- I wiped data, cache, and dalvik cache
4- I flashed CM11 again
5- I wiped data again
6- Rebooted
Bootloop happened once more.
Hello xda developers
I have an SGS2 (i9100), i tested many custom roms like cm13(official/unofficial), lineage 13(unofficial), resurrection remix(lollipop and marshmallow), aicp (marshmallow), aokp (marshmallow) and more... . the problem that my i9100 always entering to bootloop when i restart the phone or reboot by himself and the only solution is to make data/factory reset to gain access to my phone another time, after 3 or 4 days i should do the same process to remove this terrible bootloop, tested with another battery but no luck.
Please tell me what should i do to make my phone stabe? Is it software or hardware issue?
And thanks.
make clean install with all wipes with TWRP or zip flashable cleaner scripts
Abels2 said:
make clean install with all wipes with TWRP or zip flashable cleaner scripts
Click to expand...
Click to collapse
thanks for reply.
can you provide me flashable zip?
djamiirr said:
thanks for reply.
can you provide me flashable zip?
Click to expand...
Click to collapse
https://mega.nz/#F!gdxEFbzZ!b66K7QoVhWshwUV7L-mgHg
gs2ROMNuke
Abels2 said:
https://mega.nz/#F!gdxEFbzZ!b66K7QoVhWshwUV7L-mgHg
gs2ROMNuke
Click to expand...
Click to collapse
Thank you dude but the SGS2 is still in a bootloop cycle.
djamiirr said:
Thank you dude but the SGS2 is still in a bootloop cycle.
Click to expand...
Click to collapse
even after installing a system? return back to rom stock from 4.1.2
Rom:
https://www.mediafire.com/file/ds4xn2jv0exntvx/I9100XWMS3_I9100FOPLS6_FOP_PDA_PHONE_CSC.zip
Odin:
https://www.mediafire.com/file/py55qjre4i96li2/Odin_1.85.zip
chose PIT,PDA,PHONE and CSC and flash after this your phone return stock without bootloops but need root and install TWRP, easy way flash on normal recovery this zip:
https://app.box.com/s/bp9vm6i0vuq1c0x4d8x3y9253b8i38q6/file/52065481861
after this from the TWRP performs the necessary wipes and you can go to the preferred ROM
Abels2 said:
even after installing a system? return back to rom stock from 4.1.2
Rom:
https://www.mediafire.com/file/ds4xn2jv0exntvx/I9100XWMS3_I9100FOPLS6_FOP_PDA_PHONE_CSC.zip
Odin:
https://www.mediafire.com/file/py55qjre4i96li2/Odin_1.85.zip
chose PIT,PDA,PHONE and CSC and flash after this your phone return stock without bootloops but need root and install TWRP, easy way flash on normal recovery this zip:
https://app.box.com/s/bp9vm6i0vuq1c0x4d8x3y9253b8i38q6/file/52065481861
after this from the TWRP performs the necessary wipes and you can go to the preferred ROM
Click to expand...
Click to collapse
Thank you i will try this solution using my old stockrom (one .tar.md5 file) and a pit with 1GB System, 4GB Data and 512MB Preload .
i hope that will make a difference.
one more question:
can bad repartitioning cause this problem?
Abels2 said:
even after installing a system? return back to rom stock from 4.1.2
Rom:
https://www.mediafire.com/file/ds4xn2jv0exntvx/I9100XWMS3_I9100FOPLS6_FOP_PDA_PHONE_CSC.zip
Odin:
https://www.mediafire.com/file/py55qjre4i96li2/Odin_1.85.zip
chose PIT,PDA,PHONE and CSC and flash after this your phone return stock without bootloops but need root and install TWRP, easy way flash on normal recovery this zip:
https://app.box.com/s/bp9vm6i0vuq1c0x4d8x3y9253b8i38q6/file/52065481861
after this from the TWRP performs the necessary wipes and you can go to the preferred ROM
Click to expand...
Click to collapse
Sorry but no luck
bootlooping again
oh please is there no one can help me??