hey guys. just want to start by saying im a NOOB in the rooting/flashing world so i'll greatly appreciate your patients.
now, I had my glaxy tab 10.1 rooted and was running clockworkmod 4.4 and wanted to upgrade that to the new 5.5.0.4, I went to the following link
http://forum.xda-developers.com/showthread.php?t=1312218
and downloaded the zip file and installed it on to my tab (P7510UW) and now i cant get into recovery. Im not sure where I've gone wrong but if someone can help me get back into recovery that would be awesome. And also if someone can explain why this would happen and how i can prevent this in the future, would be great.
I am running the AOKP rom 4.0.4 if that helps.
again, any and all help is appreciated
thanks.
That recovery isn't for the 10.1 that's why it didn't work. Grab the correct recovery and you won't have a problem.
Beezer80 said:
That recovery isn't for the 10.1 that's why it didn't work. Grab the correct recovery and you won't have a problem.
Click to expand...
Click to collapse
Thanks for the info. Any idea on how I can install the new recovery? Because when I try to boot into recovery my tablet just turns off. Is there a how to guide or something I should be following?
Thanks
Grab the correct recovery for your tab from the development section. Boot into download mode on the tab and Oden the modified recovery.
Are you even able to get the device to the download mode...???
I was playing around with the Ubislate 7ci tablet, which is basically a generic Android tablet with stock ICS. Since it is not supported well, I went thru multiple documents and rooted it, After a lot of tries installed ClockWorkMod 4 too and took a backup. But after that I went one too far and installed ClockWorkMod touch 6, which pushed my system in to a bootloop. I am not able to go to recovery, adb / fastboot is not recognizing my tablet.
I tried writing the boot.img and recovery.img to SD card using win32diskimager, but the tablet is not booting from the SD card.
I have the backup files from ClockWorkMod and a tablet which bootloops (not able to go in to recovery or adb/fastboot). Is there a chance of reviving the tablet?
Ubislate 7ci soft bricked
I read a lot of threads (inside and outside of XDA) and all of them suggest using fastboot / recovery, which is not working for me or suggest to flash a firmware. I don't have the correct firmware, so I have downloaded a img file for another China tablet with ICS, just searching more before trying that, since that could hard brick my tablet.
I have also analyzed what I did wrong and I could see that the clockworkmod touch img file is moved to /dev/block/nandg, which should only affect recovery and should not affect normal boot-up. I have left my tablet to discharge to see whether rebooting after discharge goes directly to nanda.
If you have any suggestions to try out, it is much appreciated.
need help got ubislate 7ci in dec12 with bootloop problem pl advice how to flash/bric
need help got ubislate 7ci in dec12 with bootloop problem pl advice how to flash/brick whatever applicable my friend got a working 7ci how can i copy his rom &load in my 7ci using flash/brick
on long pressing power+vol up a green android logo comes up& no key works& system hangs.
can i reset android using key board if so pl help.
vinweb said:
need help got ubislate 7ci in dec12 with bootloop problem pl advice how to flash/brick whatever applicable my friend got a working 7ci how can i copy his rom &load in my 7ci using flash/brick
on long pressing power+vol up a green android logo comes up& no key works& system hangs.
can i reset android using key board if so pl help.
Click to expand...
Click to collapse
I have a Ubislate 7C+ - Have you tried doing a factory reset? There's a tiny hole on the back of the tablet for it.
Are you able to get in to fastboot
vinweb said:
need help got ubislate 7ci in dec12 with bootloop problem pl advice how to flash/brick whatever applicable my friend got a working 7ci how can i copy his rom &load in my 7ci using flash/brick
on long pressing power+vol up a green android logo comes up& no key works& system hangs.
can i reset android using key board if so pl help.
Click to expand...
Click to collapse
My 7ci did not go in to a fastboot mode :crying:. If you can get in to fastboot mode, you can try flashing CWM recovery and restore a CWM backup taken from your friend's machine. I have attached the version of CWM which worked for me and as always NO GUARANTEES. USE IT AT YOUR OWN DISCRETION.
FYI - Fastboot was NOT working in my Ubislate, I was able to get adb working ROOTING your Ubislate 7ci
If it is not too much trouble send it back to datawind ([email protected])
Cyber-Logic said:
I have a Ubislate 7C+ - Have you tried doing a factory reset? There's a tiny hole on the back of the tablet for it.
Click to expand...
Click to collapse
I don't think there is a reset button in Ubislate 7ci. All I see is a hole for the mic.
Success
srinivask82 said:
If it is not too much trouble send it back to datawind ([email protected])
Click to expand...
Click to collapse
I sent the TAB back and they fixed the tab and sent it back :victory:
ROM
Found this ROM
havent tried myself yet
http://forum.gsmhosting.com/vbb/f606/ubislate-7ci-working-rom-found-1682115/
asrinivask82 said:
I read a lot of threads (inside and outside of XDA) and all of them suggest using fastboot / recovery, which is not working for me or suggest to flash a firmware. I don't have the correct firmware, so I have downloaded a img file for another China tablet with ICS, just searching more before trying that, since that could hard brick my tablet.
I have also analyzed what I did wrong and I could see that the clockworkmod touch img file is moved to /dev/block/nandg, which should only affect recovery and should not affect normal boot-up. I have left my tablet to discharge to see whether rebooting after discharge goes directly to nanda.
If you have any suggestions to try out, it is much appreciated.
Click to expand...
Click to collapse
Hope your issues are solved, can I have your CWM backup.img, my Ubislate 7ci is softbricked. Please help.
Try this
chirag.here said:
Hope your issues are solved, can I have your CWM backup.img, my Ubislate 7ci is softbricked. Please help.
Click to expand...
Click to collapse
The clockworkmod image which worked for my 7Ci and few 7C+ (based on the reply to this thread), can be found in the following thread in the second post. Best of luck... :fingers-crossed:
Successfully Rooted Ubislate 7ci and installed ClockWorkMod
srinivask82 said:
The clockworkmod image which worked for my 7Ci and few 7C+ (based on the reply to this thread), can be found in the following thread in the second post. Best of luck... :fingers-crossed:
Successfully Rooted Ubislate 7ci and installed ClockWorkMod
Click to expand...
Click to collapse
cwm that I have works well with my 7ci. I need a system backup of your ubislate which u did with your cwm.. Plz help if u can..
srinivask82 said:
I was playing around with the Ubislate 7ci tablet, which is basically a generic Android tablet with stock ICS. Since it is not supported well, I went thru multiple documents and rooted it, After a lot of tries installed ClockWorkMod 4 too and took a backup. But after that I went one too far and installed ClockWorkMod touch 6, which pushed my system in to a bootloop. I am not able to go to recovery, adb / fastboot is not recognizing my tablet.
I tried writing the boot.img and recovery.img to SD card using win32diskimager, but the tablet is not booting from the SD card.
I have the backup files from ClockWorkMod and a tablet which bootloops (not able to go in to recovery or adb/fastboot). Is there a chance of reviving the tablet?
Click to expand...
Click to collapse
Hey could you please upload your backup files here for others?
want rom for the ubislate 7cz im helpless
plz help me in gettng rom for my ubislate 7cz its an earnest rrquest plz help!
I have a Karbonn Titanium S2....Already Rooted it. But didnt install CWM. Installed Pimp My ROM........Changed few settings.....when i rebooted the device, it is stuck in Karbonn Logo. I entered recovery mode (Andriod Recovery <3e>) and Wiped all user data and cache. But still the phone doesnt go beyond the operator logo. Phone is just one month old................. Pls help me guys!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!:crying:
Help
karthiknanthaa said:
I have a Karbonn Titanium S2....Already Rooted it. But didnt install CWM. Installed Pimp My ROM........Changed few settings.....when i rebooted the device, it is stuck in Karbonn Logo. I entered recovery mode (Andriod Recovery <3e>) and Wiped all user data and cache. But still the phone doesnt go beyond the operator logo. Phone is just one month old................. Pls help me guys!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!:crying:
Click to expand...
Click to collapse
If you can access your recovery and/or sd card through mounting. Your device isn't bricked. I would suggest you double check everything you downloaded and make sure it's all compatible with your device. If one simple .zip doesn't match your device you can get a bootloop or soft brick (non-fatal) which is what you seem to be experiencing. Let me know if you have any questions and thanks for sharing!
Still facing issues..........
Heavywater88 said:
If you can access your recovery and/or sd card through mounting. Your device isn't bricked. I would suggest you double check everything you downloaded and make sure it's all compatible with your device. If one simple .zip doesn't match your device you can get a bootloop or soft brick (non-fatal) which is what you seem to be experiencing. Let me know if you have any questions and thanks for sharing!
Click to expand...
Click to collapse
Not getting the exact stock rom for this model anywhere. when i tried to install other custom roms........installation gets aborted.
Search in moulnisky.com there you may find your stock rom with flash tool
Sent from my A15 using XDA Premium 4 mobile app
Hi guys. I have a problem.
I accidentally deleted all odex file from my root folder. Now my phone stuck on boot screen..
I read somewhere here that MTK based phone can used some other roms if you cant find your own stock rom.
Can someone teach me or provide a link for this? I cant still access my recovery menu. I tried the factory reset and not a luck.
My Phone is BAUHN ASP 5000H
MT6589
ALPS.JB2.MP.V1
Cant find my stock rom so my only hope is to use similar rom to fit in my phone.........
Someone help me pls
Hey guys, i have a Acer Iconia B1-721 That has android 4.2.2 on it. It has a virus that infected the whole system. If i do a factory reset the virus still exists on the device. I tried flashing it with a spft image i found here, but it seems like its bootloader is still locked because spft gives a error and phone disconnects.
I pushed the system.img to the device using adb but it only caused the tab to stop booting. Now i cant use anything but the stock recovery to flash a stock rom. But the 4.4 stock rom for stock recovery does not get picked up by the recovery.
So i ask, is there anyone that can help me with the 4.2.2 stock rom for stock recovery or the test point to force flash with SPFT.
Thanx in advance.
Please guys, i really need your help.
Bump, please experts, help a guy to fix his tab.
I need to bump this again.
If no one can help me with the ROM or test point, can someone please tell me how I can flash the 4.4 ROM with stock recovery? Maybe i'm doing something wrong.
I'm relying on this to revive this phone.