Hello guys. First, I have to say that I'm not experienced with android phone modifications. I am trying to get NeatROM into my phone, but I can't set up custom recovery mod. I tried both CWM and TWRP.
This is my third time I am re-installing the ROM, first I have done it with ODIN second time with CWM recovery, but now I can only enter "Android system recovery <3e>" where there isn't an option "Install Rom SD card".
I don't know how CWM recovery got replaced with stock recovery mod,but I am suspicions that it happened during latest Samsung "Software update" via Kies.
I tried to flash CWM and TWRP recoveries via their apps, but when the phone booted, there was always stock recovery mod. I also tried to flash recovery mod via Android SDK, following manual on phonearena.com, but got stucked on 3rd step- when I typed in "adb reboot bootloader" my phone only restarted and it did not enter bootloader.
Please, can you help to flash the stock recovery mod, so I can install new ROM, or is there other way to get it into my phone and then flash the recovery mod?
Never mind, I was able to flash CWM recovery with Odin, following the steps on androidlegend[dot]com. Then it let me to install NeatROM.
Related
Hello everyone, First I apologize for my English.
I have a problem with my TF101G(B70), CMW installed and no ROM, I adb pushed stock rom but when i try to install it shows me "install complete" but nothing happens and if I reboot it returns in recovery I can't use NVFLASH. I'm desperate
I'd like to install stock 9.2.2.6 and stock recovery if is possible.
I tried to install twrp and stock recovery but the device boots always in cwm
Thanks again to all
Hey guys -
I'm having trouble getting CWM Recovery to work with my YP-G70. I've rooted, installed ROM Manager, wiped data and partitions, installed Odin, Used Odin to (supposedly) flash the DD_01142012.tar recovery to the device. Everything looks successful, but when booting back up ROM manager only gives me the option to go to "recovery setup" instead of the normal flash option. Even when I reboot it in recovery, it just goes to the standard android recovery screen. Any ideas on how to fix this? It may be painfully obvious, this is my first root.
Hydraulix_93 said:
Hey guys -
I'm having trouble getting CWM Recovery to work with my YP-G70. I've rooted, installed ROM Manager, wiped data and partitions, installed Odin, Used Odin to (supposedly) flash the DD_01142012.tar recovery to the device. Everything looks successful, but when booting back up ROM manager only gives me the option to go to "recovery setup" instead of the normal flash option. Even when I reboot it in recovery, it just goes to the standard android recovery screen. Any ideas on how to fix this? It may be painfully obvious, this is my first root.
Click to expand...
Click to collapse
Rom Manager does not work for this device ( I think ) and you should not use it. "DD_01142012.tar" is not just a recovery, it's the kernel too. They are integrated. Flash it again and hold power and vol-up during boot up to get to recovery then flash your rom...
Hello,
I have just successfully rooted my S3 using "Heimdall Frontend" following the tutorial here:
However I found initially when leaving "No Reboot" unchecked I was unable to boot into CWM until I checked no Reboot then once the flash was complete I manually went into CWM by holding the recovery keys.
I then installed the SuperSu zip file on my SD card and rebooted my phone into it's newly rooted state.
HOWEVER.. I went to boot my S3 into CWM Recovery to flash a custom ROM and I'm only able to boot into the standard android recovery.. It says on the tutorial that versions 4.1.2+ need to tick "No reboot" otherwise the newer firmware simply wipes over CWM recovery every reboot..
I was under the impression that CWM was there as a safety net in case my phone ever played up and needed to be unrooted?
read this http://forum.xda-developers.com/showthread.php?t=1911726
UPDATE: After using ROM Manager to boot into CWM to create a backup, it gave the option to "Fix reflashing to original recovery after reboot"
Is it a good idea to have CWM permanently flashed as my recovery? How would I revert back to the stock recovery should I want to unroot the device?
Thanks
iamtherealmungo said:
UPDATE: After using ROM Manager to boot into CWM to create a backup, it gave the option to "Fix reflashing to original recovery after reboot"
Is it a good idea to have CWM permanently flashed as my recovery? How would I revert back to the stock recovery should I want to unroot the device?
Thanks
Click to expand...
Click to collapse
You need to read the faqs and guides its all posted and has been asked multiple times .
I have a rooted MDK Verizon S4 with SuperSU installed. I had been trying to use Rom Manager to install clockworkmod recovery and every time, it comes back with the message that it has been successfully installed. When I try to boot into recovery, it wouldn't work. I finally installed GooManager and went ahead and installed TWRP. Now I am able to boot into TWRP with no issues, but when I try to overwrite and install clockworkmod recovery from within Rom Manager, it again comes back with the message that it has been successfully installed, but it still boots into TWRP.
I understand that I can use TWRP to switch over to a different rom, but I am just befuddled as to why I am not able to install clockworkmod. Can you guys please help me understand what I am doing wrong?
the_jaguar said:
I have a rooted MDK Verizon S4 with SuperSU installed. I had been trying to use Rom Manager to install clockworkmod recovery and every time, it comes back with the message that it has been successfully installed. When I try to boot into recovery, it wouldn't work. I finally installed GooManager and went ahead and installed TWRP. Now I am able to boot into TWRP with no issues, but when I try to overwrite and install clockworkmod recovery from within Rom Manager, it again comes back with the message that it has been successfully installed, but it still boots into TWRP.
I understand that I can use TWRP to switch over to a different rom, but I am just befuddled as to why I am not able to install clockworkmod. Can you guys please help me understand what I am doing wrong?
Click to expand...
Click to collapse
You can either ODIN the CWM edition you want (for example Philz Touch Recovery - http://goo.im/devs/philz_touch/CWM_Advanced_Edition/jfltevzw) - get the md5 file of course for ODIN. You can also try to flash the zip file of Philz Touch Recovery from your SDCard (same site - http://goo.im/devs/philz_touch/CWM_Advanced_Edition/jfltevzw) through TWRP. Reboot into recovery and see what happens.
Skeetch79 said:
You can either ODIN the CWM edition you want (for example Philz Touch Recovery - http://goo.im/devs/philz_touch/CWM_Advanced_Edition/jfltevzw) - get the md5 file of course for ODIN. You can also try to flash the zip file of Philz Touch Recovery from your SDCard (same site - http://goo.im/devs/philz_touch/CWM_Advanced_Edition/jfltevzw) through TWRP. Reboot into recovery and see what happens.
Click to expand...
Click to collapse
Thanks. When I was trying to install CWM within Rom Manger, I ended up paying for the touch upgrade, hence my desire to try and install CWM form within Rom Manager... It's just a bit frustrating that I can't figure out what's going on..
My galaxy s2 19100 was having problems and I wanted to flash a custom rom but did not make a backup first,so first I had to root and install a recovery I downloaded CWM-SuperSu-v0.97 installed it had root and I asssumed I had recovery also, did the wipe and installed the rom got error message saying instalation failed tried another rom same message then I realiased that cwm was not installed and was using the systems recovery and my computer
does not pick up the phone even after installing samsung drivers and Kies,so now there is no system and I can only boot into recovery and download modes. tried to use Odin 3 but still does not connect. how can I install CWM or TWRP img. so far I have googled but the required files is not on the websites anymore.
Please Help Thanks in advance:
Currently what recovery do you have installed?