Hi Guys, I'm sory for posting this in here, but to no permissions to go the other way.
I've been struggling for same days with a problem on my custom board EM210 Android 4.03 ICS regarding Carrier network.
From the logcat -b radio I got
D/RILJ ( 2325): [0129]> SIGNAL_STRENGTH
D/RIL ( 2149): onRequest: SIGNAL_STRENGTH
E/RIL ( 2149): EM210 onRequest1 129=19
E/RIL ( 2149): EM210 onRequest15 12=19
D/AT ( 2149): AT> AT+CSQ
D/AT ( 2149): AT< +CSQ: 8,99
D/AT ( 2149): AT< OK
E/RILC ( 2149): invalid response length
D/RILJ ( 2325): [0129]< SIGNAL_STRENGTH error: com.android.internal.telephony
.CommandException: INVALID_RESPONSE
D/RILB ( 2325): getLteOnCdmaMode=0 curVal=-1 product_type='' lteOnCdmaProduct
Type=''
D/RILB ( 2325): getLteOnCdmaMode=0 curVal=-1 product_type='' lteOnCdmaProduct
Type=''
And this prevents carrier signal to be shown in the icon on the status bar.
Does anybody has a way to solve this ? Or at least an idea on how it can be solved?
Thanks
Related
Hi,
I have been using a non-carrier-branded phone (HTC Desire -> stock ROM) without problems during more than one year. Voice and data OK. Carrier is Orange Spain.
Now, I've changed to a different carrier (Vodafone Spain) using and old SIM card I've been using during years in several old Nokia phones without problems (using only voice). As I don't have data yet in that old line, I've deactivated all data connections (3G and WIFI) in my HTC Desire.
With the Vodafone SIM card ALL calls drop after 10-20 seconds.
I ordered a duplicate of the SIM card and the problem still happens. Then I tried with my wife's Vodafone SIM card and the problem it's the same.
The problem happens at different places (home, office, gym...).
I've made a HARD reset without success.
--------------
So, I'm running out of ideas. It seems that the problem root becomes from a combination of the phone and the carrier, worst possible scenario.
I'd like to debug the problem (mainly to know who is dropping the call, the carrier or the phone) but I don't know where I can change (if possible) the call trace level to DEBUG and where are the associated logs.
Maybe with the stock ROM is impossible. In that case, can anyone recommend me any ROM I can use to debug this problem?
Thanks
HTC Desire A8181
Android: 2.2
Baseband version: 32.49.00.32U_5.11.05.27
Kernel version: 2.6.32.15-gf5a401c [email protected] # 1
Build number: 2.29.405.5 CL293415 release-keys
Software number: 2.29.405.5
Another idea:
Do you think that upgrading to v2.3 manually could solve the problem?
Ok, I've found that using adb and logcat is possible to debug calls.
logcat -b radio
...
D/HTC_RIL ( 65): RX::> 3\r
D/HTC_RIL ( 65): (t=1320053119)%% 3\r
D/RILJ ( 197): [UNSL]< UNSOL_RESPONSE_CALL_STATE_CHANGED
D/HTC_RIL ( 65): RX::> @HTCDIS: 0000\r\n
D/RILJ ( 197): [0294]> GET_CURRENT_CALLS
D/HTC_RIL ( 65): (t=1320053119)%% @HTCDIS: 0000\r\n
D/HTC_RIL ( 65): ril_func_get_call_list():called
D/HTC_RIL ( 65): (t=1320053119)>> AT+CLCC\r
D/HTC_RIL ( 65): RX::> 0\r
D/HTC_RIL ( 65): (t=1320053119)<< 0\r
E/HTC_RIL ( 65): write_attr_file():failed to open attribute file: /sys/module/gpio_event/parameters/phone_call_status(errno=2)
E/HTC_RIL ( 65): write_attr_file():failed to open attribute file: /sys/module/gpio_event/parameters/phone_call_status(errno=2)
E/HTC_RIL ( 65): write_attr_file():failed to open attribute file: /sys/class/htc_accessory/phonein/flag(errno=2)
E/HTC_RIL ( 65): write_attr_file():failed to open attribute file: /sys/module/msm_flashlight/parameters/phone_status(errno=2)
D/RILJ ( 197): [UNSL]< UNSOL_RESPONSE_CALL_STATE_CHANGED
D/RILJ ( 197): [0295]> GET_CURRENT_CALLS
D/HTC_RIL ( 65): ril_func_get_call_list():called
D/RILJ ( 197): [0294]< GET_CURRENT_CALLS
D/HTC_RIL ( 65): (t=1320053119)>> AT+CLCC\r
D/HTC_RIL ( 65): RX::> 0\r
D/HTC_RIL ( 65): (t=1320053119)<< 0\r
E/HTC_RIL ( 65): write_attr_file():failed to open attribute file: /sys/module/gpio_event/parameters/phone_call_status(errno=2)
E/HTC_RIL ( 65): write_attr_file():failed to open attribute file: /sys/module/gpio_event/parameters/phone_call_status(errno=2)
D/RILJ ( 197): [0295]< GET_CURRENT_CALLS
D/RILJ ( 197): [0296]> LAST_CALL_FAIL_CAUSE
D/HTC_RIL ( 65): ril_func_get_last_call_fail_cause():called
D/HTC_RIL ( 65): (t=1320053119)>> AT\r
D/HTC_RIL ( 65): RX::> 0\r
D/HTC_RIL ( 65): (t=1320053119)<< 0\r
D/RILJ ( 197): [0296]< LAST_CALL_FAIL_CAUSE {65535}
D/GSM ( 197): [GSMConn] onDisconnect: cause=ERROR_UNSPECIFIED
D/GSM ( 197): GSMDataConnTrack handleMessage { what=15 when=2545321 [email protected] }
D/GSM ( 197): [GsmDataConnectionTracker](0)***trySetupData due to 2GVoiceCallEnded
D/GSM ( 197): [DSAC DEB] trySetupData with mIsPsRestricted=false
D/GSM ( 197): [GsmDataConnectionTracker](0)isDataAllowed()true, mRequestedApnType = default
D/GSM ( 197): [GsmDataConnectionTracker](0)isDataAllowed()true, mRequestedApnType = default
D/GSM ( 197): [GsmDataConnectionTracker](0)trySetupData: Not ready for data: dataState=IDLE gprsState=0 sim=true UMTS=true phoneState=IDLE isDataAll
false dataOnRoamingEnable=false ps restricted=false desiredPowerState=true setting=false MasterDataEnabled=true isPowerSavingModeActivated=false
D/GSM ( 197): GSMDataConnTrack handleMessage { what=15 when=2545322 [email protected] }
D/GSM ( 197): [GsmDataConnectionTracker](1)***trySetupData due to 2GVoiceCallEnded
D/GSM ( 197): [DSAC DEB] trySetupData with mIsPsRestricted=false
...
It seems that carrier is disconnecting the call, but why?
I updated radio to 5.14.05.17 and 5.17.05.23 without success. I've also tried to use CM7 7.0.3 and CM 7.1... but it's no working...
Any idea?
Hi -
I'm hoping that someone can help me... after flashing a rom I no longer have data. Voice works perfectly fine, however it is not able showing any 3g connection any more. Wifi/Bluetooth also works perfectly.
I've tried reflashing modems and firmwares with ODIN but it has not fixed the issue.
Does anyone have any suggestions? I don't have a backup of the EFS partition before the problem.
Cheers
-dh
call ur career customer care & ask them to send u settings
Sent from my Galaxy S II via XDA app so sorry if i did any typographical or other mistakes!!
I did that but it had no affect. They also showed me that replacing my sim in one of their phones gave data. So I'm left thinking it is my phone that is causing the problem?
One factory reset
Two check CSC and APN settings are correct .
Three check DATA is not switched OFF .
As you have flashed and then had problems logic says its its unlikely to be the phone .
Clean phone revert to correct stock rom and test .
jje
Do you still have your ime?
Sent from my GT-I9100 using XDA App
Tried using ODIN to go back to stock rom, checked CSC and APN settings but no luck. Still says disconnected in status.
I have a valid IMEI number (or at least I think it is valid) - and phone calls work absolutely fine.
When putting my SIM in other phones the data works perfectly.
Any other ideas?
If you press and hold the power button until the menu pops up can you select to turn data on?
Sent from my GT-I9100 using XDA App
Tried that yep, with no luck. It turns the 'mobile network state' into connecting followed by disconnected. Strange eh?
Isn't there a *# combo to look at the RIL status? logcat doesn't help (form what i can tell).
Oddly enough... (I'm traveling right now from US->UK) - but under Status I get unknown for phone # and a lil 'R' above the signal strength?
I think the "r" is for roaming.
I know my carrier has different data settings for different phones and one time I had to ring them to set their system up so I could get data working.
Worth a try...
Also worth a try is splashing your phone with holy water and saying "the power of Christ compels you"
Sent from my GT-I9100 using XDA App
Can anyone make sense of this?
D/GSM ( 2820): [GsmDC-1] notifyConnectionCompleted at 1324543580053 cause=SERVICE_OPTION_NOT_SUBSCRIBED
D/GSM ( 2820): [GsmDC-1] clearSettings
D/GSM ( 2820): [GsmDCT] handleMessage msg={ what=270336 when=-1ms arg1=-1 [email protected] }
D/GSM ( 2820): [GsmDCT] isDataSetupCompleteOk return false, ar.result=SERVICE_OPTION_NOT_SUBSCRIBED
D/GSM ( 2820): [GsmDCT] onDataSetupComplete: error apn=pta cause=SERVICE_OPTION_NOT_SUBSCRIBED
D/GSM ( 2820): [GsmDCT] onDataSetupComplete: WaitingApns.size=0 WaitingApnsPermFailureCountDown=0
D/GSM ( 2820): [GsmDCT] onDataSetupComplete: All APN's had permanent failures, stop retrying
D/GSM ( 2820): [ApnContext] setState: FAILED for type default, previous state:INITING
D/GSM ( 2820): [GsmDCT] isDataPossible(default): possible=false isDataAllowed=true apnTypePossible=false apnContextisEnabled=true apnContextState()=FAILED
D/GSM ( 2820): [GsmDCT] get active apn string for type:default
D/GSM ( 2820): [GsmDCT] onDataSetupComplete: permanent error apn=%spta
E/RIL ( 2584): ipc_debug_send_ipc: timestamp 1324543593175793
E/RIL ( 2584): [EVT]:Req(0), RX(1)
E/RIL ( 2584): RX: Time: 1693666008 / 719179
E/RIL ( 2584): RX: (M)IPC_DISP_CMD (S)IPC_DISP_ICON_INFO (T)IPC_CMD_NOTI len:b mseq:ff aseq:cf
E/RIL ( 2584): RX: ---- DATA BEGIN ----
E/RIL ( 2584): RX: FF 00 00 05
E/RIL ( 2584): RX: ---- DATA END ----
E/RIL ( 2584): RxDis_ResIconInformation()
E/RIL ( 2584): RSSI Updated
E/RIL ( 2584): RIL_onMultiClientUnsolicitedResponse:
E/RIL ( 2584): unsupported multiclient unsolicited response code 1009
E/RIL ( 2584): ipc_debug_send_ipc: timestamp 1324543598616300
E/RIL ( 2584): ipc_debug_send_ipc: timestamp 1324543598616628
E/RIL ( 2584): [EVT]:Req(0), RX(2)
E/RIL ( 2584): RX: Time: 1693671449 / 724619
E/RIL ( 2584): RX: (M)IPC_NET_CMD (S)IPC_NET_REGIST (T)IPC_CMD_NOTI len:12 mseq:ff aseq:ff
E/RIL ( 2584): RX: ---- DATA BEGIN ----
E/RIL ( 2584): RX: 04 02 06 93 A7 91 6A 5D 35 00 00
E/RIL ( 2584): RX: ---- DATA END ----
E/RIL ( 2584): ipc_recv_network()
E/RIL ( 2584): RxNET_ResNetworkRegistration()
E/RIL ( 2584): RegiStatus_Ipc2Ril()
E/RIL ( 2584): RIL_onMultiClientUnsolicitedResponse:
E/RIL ( 2584): unsupported multiclient unsolicited response code 1002
I'm no expert but looks like it's complaining about your APN settings.
Sent from my GT-I9100 using XDA App
hi everybody
i need help with this logcat.
i really need help right now
main problem is here
Code:
I/Netd ( 2153): Netd 1.0 starting
W/InterfaceController( 2153): Warning (Cannot load library: load_library(linker.
cpp:771): library "/system/lib/libnetcmdiface.so" not found) while opening the n
et interface command library
D/libEGL ( 2151): loaded /system/lib/egl/libEGL_adreno200.so
D/libEGL ( 2151): loaded /system/lib/egl/libGLESv1_CM_adreno200.so
D/libEGL ( 2151): loaded /system/lib/egl/libGLESv2_adreno200.so
I/Adreno200-EGL( 2151): <qeglDrvAPI_eglInitialize:294>: EGL 1.4 QUALCOMM build:
AU_LINUX_ANDROID_JB.04.01.01.00.036_msm8960_JB_CL2644550_release_AU (CL2644550)
I/Adreno200-EGL( 2151): Build Date: 07/31/12 Tue
I/Adreno200-EGL( 2151): Local Branch:
I/Adreno200-EGL( 2151): Remote Branch: quic/master
I/Adreno200-EGL( 2151): Local Patches: NONE
I/Adreno200-EGL( 2151): Reconstruct Branch: AU_LINUX_ANDROID_JB.04.01.01.00.036
+ NOTHING
E/Trace ( 2151): error opening trace file: No such file or directory (2)
D/memalloc( 2143): init_pmem_area: Initializing pmem area
D/memalloc( 2143): init_pmem_area_locked: Opening master pmem FD
D/memalloc( 2143): init_pmem_area_locked: Total pmem size: 18874368
E/Netd ( 2153): exec() res=65280 for /system/bin/iptables -t filter -N oem_ou
t
E/Netd ( 2153): exec() res=65280 for /system/bin/ip6tables -t filter -N oem_o
ut
F/libc ( 2225): Fatal signal 7 (SIGBUS) at 0x400c32d0 (code=2), thread 2225 (
iptables)
I/Netd ( 2229): Netd 1.0 starting
W/InterfaceController( 2229): Warning (Cannot load library: load_library(linker.
cpp:771): library "/system/lib/libnetcmdiface.so" not found) while opening the n
et interface command library
D/MDnsDS ( 2229): MDnsSdListener::Hander starting up
D/MDnsDS ( 2229): MDnsSdListener starting to monitor
D/MDnsDS ( 2229): Going to poll with pollCount 1
D/libc ( 1667): pt_debug : pthread_create->start_routine= 0xf4dd, tls=0x406f
9f00, arg=0xed5680
D/libc ( 1667): pt_debug : __thread_entry->func= 0xf4dd
D/libc ( 1667): , tls=0x406f9f00, arg=0xed5680
I/Netd ( 2443): Netd 1.0 starting
W/InterfaceController( 2443): Warning (Cannot load library: load_library(linker.
cpp:771): library "/system/lib/libnetcmdiface.so" not found) while opening the n
et interface command library
I/DEBUG ( 1505): timed out waiting for tid=2151 to die
I/DEBUG ( 1505): ptrace detach from 2151 failed: No such process
I/DEBUG ( 1505): debuggerd committing suicide to free the zombie!
I/DEBUG ( 2503): debuggerd: Jul 3 2013 11:35:05
D/MDnsDS ( 2443): MDnsSdListener::Hander starting up
D/MDnsDS ( 2443): MDnsSdListener starting to monitor
D/MDnsDS ( 2443): Going to poll with pollCount 1
Somehow last night my phone (Galaxy S4 running AOSP 4.4.2) crashed and now it wont reboot. It just sticks on the screen with the four colours animation for ever. I tried deleting the Cache, and Davilik Cache but it has not fixed the problem .. after this is went through the Upgrading Android process for all the apps but then stuck on "Starting Apps" .. so pretty clearly some application is starting and has a problem and so my phone wont boot .. but is there anyway of finding out which application it is?? Im aware I can wipe data and start again but would like to solve the problem without this if its possible. I also tried re-flashing my ROM but it didnt help.
Thanks for any help in advance.
If it helps anybody help me, I plugged my phone into usb while it is stuck in the bootloop and ran
adb logcat *:E .. here is the result
--------- beginning of /dev/log/system
--------- beginning of /dev/log/main
E/DataRouter( 198): USB Interface is open with 0x9
E/kickstart-qcks( 226): Couldn't find "/dev/mdm", 1 of 10
E/macloader( 210): CID info file will be created!!!
E/wcnss_service( 221): CAL file not found
E/wcnss_service( 221): Failed to open wcnss device : No such file or directory
E/mm-camera( 211): qcamsvr_start: old_mode = 3f
E/INSTHK ( 249): Checked...
E/PPDaemon( 217): Failed to open the config file!
E/PPDaemon( 217): Panel type: 8
E/rmt_storage( 223): Remote storage service is not supported on mdm target
E/AT_Distributor( 212): Failed to init ATD
E/mm-camera( 211): qcamsvr_load_gesture_lib Error opening gesture library
E/mm-camera( 211): Cannot init Gesture library
E/mm-camera( 211): camera_plugin_create_func: handle = 0xb6c10008, client_open_fn = 0xb6c0d565, destroy_fn = 0xb6c0db99
E/QC-time-services( 220): Daemon:genoff_boot_tod_init: Unable to set TOD at boot up
E/QC-time-services( 220): Daemon: Unable to set TOD at boot up
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QC-time-services( 220): Daemon:genoff_modem_qmi_init: qmi_client_get_service_list returned -2num_services 0
E/Diag_Lib( 195): Diag_LSM_Init: Failed to open handle to diag driver, error = 13
E/QCNEA ( 214): CnE Standard Version 4.01
E/QCNEA ( 214): CnE Pro Version 1.01
E/QCNEA ( 214): Cne WQE Version 0.1
E/QCNEA ( 214): Cne NSRM Version 1.01
E/Sensorhubs( 207): couldn't find 'ssp_context' input device
E/Sensorhubs( 207): SSPContext: open sensorhub device failed(-1)
E/PRDrmPlugIn( 202): PRDrmPlugin:RDrmPlugin
E/PRDrmPlugInImp( 202): PRDRMPluginAPI::create
E/PRDrmPlugInImp( 202): PRDRMPluginAPI::SetEventHandler
E/kickstart-qcks( 226): Couldn't find "/dev/mdm", 2 of 10
E/PRDrmPlugIn( 202): PRDrmPlugin:nGetSupportInfo, uniqueId = 0
E/Sensorhubs( 207): couldn't find 'gesture_sensor' input device
E/MediaPlayerFactory( 203): calling dlopen on FACTORY_LIB
E/MediaPlayerFactory( 203): calling dlsym on pFactoryLib for FACTORY_CREATE_FN
E/MediaPlayerFactory( 203): registering DASH Player factory...
E/QualcommCamera( 203): Qint android::get_number_of_cameras(): E
E/alsa_mixer( 203): Control open failed
E/ ( 203): [ACDB RTC]->rtc init done!->result [0]
E/Diag_Lib( 203): actp_diag_init: call diag init function with B50181DD
E/ ( 203): [ACDB ACPH]->actp diag init done!
E/ACDB-LOADER( 203): done with conversion, anc config size is 148
E/ACDB-LOADER( 203): done with conversion, anc config size is 148
E/ACDB-LOADER( 203): done with conversion, anc config size is 148
E/ACDB-LOADER( 203): done with conversion, anc config size is 148
E/ACDB-LOADER( 203): done with conversion, anc config size is 74
E/ACDB-LOADER( 203): done with conversion, anc config size is 74
E/AndroidRuntime( 201): cannot open customer xml file
E/AndroidRuntime( 201): /system/csc/customer.xml can't open file
E/kickstart-qcks( 226): Couldn't find "/dev/mdm", 3 of 10
E/ICD ( 194): There is no file or permission.
E/BootAnimation( 613): Could not open '/sys/devices/w1_bus_master1/w1_master_check_id'
E/kickstart-qcks( 226): Couldn't find "/dev/mdm", 4 of 10
E/EmojiFactory_jni( 201): Failed to load libemoji.so: dlopen failed: library "libemoji.so" not found
E/kickstart-qcks( 226): Couldn't find "/dev/mdm", 5 of 10
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QC-time-services( 220): Daemon:genoff_modem_qmi_init: qmi_client_get_service_list returned -2num_services 0
E/kickstart-qcks( 226): Couldn't find "/dev/mdm", 6 of 10
E/kickstart-qcks( 226): Couldn't find "/dev/mdm", 7 of 10
E/Sensors ( 768): getName gyro_sensor name file open error.
E/GyroSensor( 768): GyroSensor : getName of gyro_sensor failed.
E/TemperatureHumiditySensor( 768): Failed to open send_accuracy sysfs
E/Sensors ( 768): sensors__get_sensors_list gyro_sensor name file open error.
E/MagneticSensor( 768): enable, 122, data_fd = -1
E/GyroSensor( 768): enable, 148, data_fd = -1
E/TemperatureHumiditySensor( 768): enable, 216, data_fd = -1
E/TemperatureHumiditySensor( 768): enable, 216, data_fd = -1
E/Sensors ( 768): sensors__get_sensors_list gyro_sensor name file open error.
E/Sensors ( 768): sensors__get_sensors_list gyro_sensor name file open error.
E/kickstart-qcks( 226): Couldn't find "/dev/mdm", 8 of 10
E/kickstart-qcks( 226): Couldn't find "/dev/mdm", 9 of 10
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QC-time-services( 220): Daemon:genoff_modem_qmi_init: qmi_client_get_service_list returned -2num_services 0
E/kickstart-qcks( 226): Couldn't find "/dev/mdm", 10 of 10
E/kickstart-qcks( 226): '/dev/mdm' was not found
E/kickstart-qcks( 226): ERROR: Can't bring MDM9K out of reset
E/alsa_ucm( 203): EC_REF_RX mixer ctl: SLIM_RX
E/alsa_ucm( 203): EC_REF_RX mixer ctl: SLIM_RX
E/alsa_ucm( 203): EC_REF_RX mixer ctl: SLIM_RX
E/alsa_ucm( 203): EC_REF_RX mixer ctl: SLIM_RX
E/alsa_mixer( 203): Control open failed
E/ ( 203): csd_client_service_init: Invalid rx device 0, setting to handset
E/ ( 203): csd_client_service_init: Invalid tx device 0, setting to handset
E/alsa_ucm( 203): Invalid current verb value: Inactive - -1
E/alsa_ucm( 203): No valid device Speaker found
E/alsa_ucm( 203): Control device not initialized
E/alsa_ucm( 203): Control device not initialized
E/alsa_pcm( 203): cannot open device '/dev/snd/pcmC0D0p', errno 2
E/ALSADevice( 203): open: Failed to initialize ALSA device 'hw:0,0'
E/AudioHardwareALSA( 203): Device open failed
E/QMI_FW ( 203): xport_open: socket creation failed - 1
E/AudioPolicyManagerBase( 203): Not output found for attached devices 00000003
E/AudioPolicyManagerBase( 203): Failed to open primary output
E/AudioPolicyManagerBase( 203): getDeviceForStrategy() speaker device not found for STRATEGY_SONIFICATION
E/AudioPolicyManagerBase( 203): getDeviceForStrategy() speaker device not found for STRATEGY_SONIFICATION
E/Audio_Control_CSC( 203): /system/csc/sales_code.dat ==> cannot open file
E/AudioPolicyService( 203): couldn't init_check the audio policy (No such device)
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QC-time-services( 220): Daemon:genoff_modem_qmi_init: qmi_client_get_service_list returned -2num_services 0
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QC-time-services( 220): Daemon:genoff_modem_qmi_init: qmi_client_get_service_list returned -2num_services 0
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QC-time-services( 220): Daemon:genoff_modem_qmi_init: qmi_client_get_service_list returned -2num_services 0
E/QC-time-services( 220): Daemon:genoff_modem_qmi_init:retry count exceeds limitQMI init failed continuing withoutserver
E/QC-time-services( 220): Daemon: QMI init failed, QMI calls inactive
E/QC-time-services( 220): Daemon: Time-services: Waiting to acceptconnection
E/QMI_FW ( 203): QMUXD: Service_id=20 not found over conn_id=0
E/QMI_FW ( 203): QMUXD: Service_id=20 not found over conn_id=18
E/QMI_FW ( 203): QMUXD: Service_id=20 not found over conn_id=37
E/QMI_FW ( 203): open_lookup_sock_fd: Lookup sock fd creation failed
E/QMI_FW ( 203): QMUXD: Service_id=20 not found over conn_id=0
E/QMI_FW ( 203): QMUXD: Service_id=20 not found over conn_id=18
E/QMI_FW ( 203): QMUXD: Service_id=20 not found over conn_id=37
E/SensorHubManager( 768): JNI: sensorhubs_get_next_module: getSensorHubList: count= 2
E/SensorHubManager( 768): JNI: sensorhubs_get_next_module: getSensorHubList: count= 2
E/SensorHubManager( 768): JNI: sensorhubs_enabledisable: delay= 0
E/EventHub( 768): could not get driver version for /dev/input/mice, Not a typewriter
E/ConnectivityService( 768): Error in networkAttributes - ignoring attempt to define type 17
E/ConnectivityService( 768): Ignoring protectedNetwork 14
E/MobileDataStateTracker( 768): default: Ignoring feature request because could not acquire PhoneService
E/MobileDataStateTracker( 768): default: Could not enable APN type "default"
F/SystemServer( 768): BOOT FAILURE Creating Connectivity Engine Service
F/SystemServer( 768): java.lang.ClassNotFoundException: Didn't find class "com.quicinc.cne.CNE" on path: DexPathList[[],nativeLibraryDirectories=[/vendor/lib, /system/lib]]
F/SystemServer( 768): at dalvik.system.BaseDexClassLoader.findClass(BaseDexClassLoader.java:56)
F/SystemServer( 768): at java.lang.ClassLoader.loadClass(ClassLoader.java:497)
F/SystemServer( 768): at java.lang.ClassLoader.loadClass(ClassLoader.java:457)
F/SystemServer( 768): at com.android.server.ServerThread.initAndLoop(SystemServer.java:572)
F/SystemServer( 768): at com.android.server.SystemServer.main(SystemServer.java:1263)
F/SystemServer( 768): at java.lang.reflect.Method.invokeNative(Native Method)
F/SystemServer( 768): at java.lang.reflect.Method.invoke(Method.java:515)
F/SystemServer( 768): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:1264)
F/SystemServer( 768): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:1080)
F/SystemServer( 768): at dalvik.system.NativeStart.main(Native Method)
E/SystemServer( 768): Failed to load CNE class
E/SystemServer( 768): java.lang.ClassNotFoundException: Didn't find class "com.quicinc.cne.CNE" on path: DexPathList[[],nativeLibraryDirectories=[/vendor/lib, /system/lib]]
E/SystemServer( 768): at dalvik.system.BaseDexClassLoader.findClass(BaseDexClassLoader.java:56)
E/SystemServer( 768): at java.lang.ClassLoader.loadClass(ClassLoader.java:497)
E/SystemServer( 768): at java.lang.ClassLoader.loadClass(ClassLoader.java:457)
E/SystemServer( 768): at com.android.server.ServerThread.initAndLoop(SystemServer.java:572)
E/SystemServer( 768): at com.android.server.SystemServer.main(SystemServer.java:1263)
E/SystemServer( 768): at java.lang.reflect.Method.invokeNative(Native Method)
E/SystemServer( 768): at java.lang.reflect.Method.invoke(Method.java:515)
E/SystemServer( 768): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:1264)
E/SystemServer( 768): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:1080)
E/SystemServer( 768): at dalvik.system.NativeStart.main(Native Method)
E/wpa_supplicant( 1981): wpa_driver_nl80211_driver_cmd: failed to issue private commands
E/WifiStateMachine( 768): Unexpected BatchedScanResults :null
E/wpa_supplicant( 1981): wpa_driver_nl80211_driver_cmd: failed to issue private commands
E/ActivityManager( 768): Attempt to launch receivers of broadcast intent Intent { act=android.net.ConnectivityService.action.PKT_CNT_SAMPLE_INTERVAL_ELAPSED flg=0x4 (has extras) } before boot completion
Hello, here is my problem,
I have always ported the miui rom to my thl w200 device.
in the latest builds, after porting it to my phone I get stuck at bootlogo.
I did a logcat but cant really find what causes this.
someone can look at it and help me?
--------- beginning of /dev/log/main
I/Resize ( 86): The size of data already meet the request.
I/Resize ( 86): Partition has been resized,so nothing to do!
D/ADB_SERVICES( 158): install_listener('tcp:5037','*smartsocket*')
D/ADB_SERVICES( 158): adb_main(): pre init_jdwp()
D/ADB_SERVICES( 158): adb_main(): post init_jdwp()
D/ADB_SERVICES( 158): Event loop starting
D/ADB_SERVICES( 158): transport: 0xf67520 init'ing for usb_handle 0xf67498 (sn='')
I/ADB_SERVICES( 158): transport: usb
D/ADB_SERVICES( 158): transport: (null) registered
D/ADB_SERVICES( 158): transport: (null) (16,17) starting
W/ADB_SERVICES( 158): (null): starting transport input thread, reading from fd 17
W/ADB_SERVICES( 158): (null): starting transport output thread on fd 17, SYNC online (2)
D/ADB_SERVICES( 158): recv: SYNC 00000001 00000002 0000
W/ADB_SERVICES( 158): (null): transport SYNC online
E/ccci_mdinit(0)( 121): md_init ver:1.00
E/ccci_mdinit(0)( 120): md_init ver:1.00
I/6620_launcher( 117): open device node succeed.(Node:/dev/stpwmt, fd:3)
I/6620_launcher( 117): keypersist.mtk.wcn.combo.chipid)-value0x6628),chipId:0x6628
I/6620_launcher( 117): index:1, chipId:0x6628
I/6620_launcher( 117): chiId:0x6628
I/6620_launcher( 117): index:1, chipId:0x6628
I/6620_launcher( 117): set chipId(0x6628) to HIF-SDIO module
I/6620_launcher( 117): Info:key:mt6620.defAnt value:mt6620_ant_m3.cfg
I/6620_launcher( 117): Info:key:mt6628.defAnt value:mt6628_ant_m1.cfg
I/6620_launcher( 117): NULL is returned, eighter EOF or error maybe found
I/6620_launcher( 117): close /system/etc/firmware/WMT.cfg succeed
I/6620_launcher( 117): index:1, chipId:0x6628
I/6620_launcher( 117): STP Mode is not set, fetching default mode...
I/6620_launcher( 117): chipId(0x6628), default Mode(1), strlen(gWmtCfgName)(39), wmtCfgFile(/system/etc/firmware//mt6628_ant_m1.cfg)
I/6620_launcher( 117): HifConfig:0x0001, wmtCfgFile:/system/etc/firmware//mt6628_ant_m1.cfg
I/6620_launcher( 117): keyro.build.type)-valueuser)
I/6620_launcher( 117): MCU patch folder path: /system/etc/firmware/
I/6620_launcher( 117): Common Interface: UART mode
I/6620_launcher( 117): MCU patch folder path: /system/etc/firmware/
I/6620_launcher( 117): Common Interface: UART mode
I/6620_launcher( 117): uart name ttyMT2
D/MsensorDaemon( 151): Msensor deamon statr!!!!!!!!!!!!
D/MsensorDaemon( 151): msensor demon start process detect demon name = memsicd3416x
D/MsensorDaemon( 151):
D/MsensorDaemon( 151): msensor demon start process detect demon prop = init.svc.memsicd3416x
D/MsensorDaemon( 151):
D/MsensorDaemon( 151): start_msensor_demon
D/MsensorDaemon( 151): HAVE_LIBC_SYSTEM_PROPERTIES
E/MsensorDaemon( 151): [99] ''
D/permission_check( 145): permission check ver:0.01
D/permission_check( 145): Empty, not decrypt!
D/permission_check( 145): change_md_nvram_attr++
--------- beginning of /dev/log/system
E/POAD ( 155): boot_mode = 0
E/POAD ( 155): update boot reason = 0
D/permission_check( 145): new_ver file exist!!!
D/permission_check( 145): change_md_nvram_attr--0
I/stp_dump( 143): ==>main
I/stp_dump( 143): stp_dump_ctrl_iface_trace_logger_sendto_fd succeed
E/stp_dump( 143): [STP_DBG] family id = 19
I/stp_dump( 143): sending dummy command
I/stp_dump( 143): set sock number to 9
I/stp_dump( 143): addr.sun_path:stp_DIR=/data/misc/stp_dump GROUP=stp
I/stp_dump( 143): Using existing control interface directory.
E/stp_dump( 143): mkdir (/data/misc/stp_dump) succeed
I/stp_dump( 143): ctrl_interface_group=1000 (from group name 'stp')
I/stp_dump( 143): chown (/data/misc/stp_dump) succeed
I/stp_dump( 143): CTRL: chmod[/data/misc/stp_dump] succeed
E/stp_dump( 143): ctrl_iface bind(PF_UNIX) failed: Address already in use
E/stp_dump( 143): ctrl_iface exists, but does not allow connections - assuming it was leftover from forced program termination
D/stp_dump( 143): Successfully replaced leftover ctrl_iface socket '/data/misc/stp_dump/stpd'
I/stp_dump( 143): set sock number to 10
I/stp_dump( 143): stp_dump_ctrl_iface_init succeed.
I/stp_dump( 143): ==>main222
I/busybox ( 114): run-parts: /system/etc/init.d: No such file or directory
D/wlanLoader( 144): checkSupport 0x6628
D/wlanLoader( 144): Match 0x6628
D/wlanLoader( 144): Get the correct chip version mt6628
D/wlanLoader( 144): Get chip Version mt6628.
D/wlanLoader( 144): DRIVER_MODULE_PATH is /system/lib/modules/wlan_mt6628.ko
D/MsensorDaemon( 151): HAVE_LIBC_SYSTEM_PROPERTIES
D/MsensorDaemon( 151): memsicd3416x running
D/MsensorDaemon( 151): Msensor deamon2 statr!!!!!!!!!!!!
D/MsensorDaemon( 151): open demon attr err = No such file or directory
E/stp_dump( 143): table == NULL || table->table == NULL
E/stp_dump( 143): table == NULL || table->table == NULL
D/wlanLoader( 144): Success to insmod the /system/lib/modules/wlan_mt6628.ko
I/thermal_repeater( 154): START+++++++++ 154
I/thermal_repeater( 154): Success to write 154 to /proc/wmt_tm/tm_pid
I/thermal_repeater( 154): Fail to chmod ffffffff
I/thermal_repeater( 154): Enter infinite loop
I/AEE/AED ( 122): Built Jan 30 2013 19:35:15
D/AEE/AED ( 122): ChangeAEEWorkMode: 3
I/AEE/AED ( 122): AED config
I/AEE/AED ( 122): mode '3'
I/AEE/AED ( 122): exp level '1
I/AEE/AED ( 122): dal enable '0'
I/AEE/AED ( 122): db count '20'
I/AEE/AED ( 122): db storage '1'
I/AEE/AED ( 122): SMP Info => 1
I/MobileLogD( 123): [void change_permission()] set mobile_log_d is in root user, adjust caps for its thread
I/MobileLogD( 123): mobilelog start after boot, mode:0
D/MobileLogD/cache( 123): init cache configure items....
D/MobileLogD/cache( 123): value of ro.build.type:user.
I/installd( 140): installd firing up
D/PQ ( 130): PQ init start...
D/PQ ( 130): PQ test...
I/ ( 137): ServiceManager: 0x41661698
D/PQ ( 130): PQ init end !
E/AEE/LIBAEE( 122): Can't remove file /sdcard/mtklog/aee_exp/temp: No such file or directory
E/AEE/LIBAEE( 122): Can't remove file /data/aee_exp/temp: No such file or directory
V/AEE/AED ( 122): ETB buffer length = 512
I/AEE/AED ( 122): wdt_status = 2, fiq_step=0
I/AEE/AED ( 122): reboot_reason = 0
V/AEE/AED ( 122): ETM start
D/installd( 140): LBE is enabled, starting...
D/NVRAM ( 152): NvRAMAgent created
E/NVRAM ( 152): Haman, serviceManager work well
D/NVRAM ( 152): NvRAMAgent Service is now ready
I/DPFD ( 149): [DPFD] main start ...
I/DPFD ( 149): [DPFD] set priority to RR:268435540
I/DPFD ( 149): [int adjustPriority()] set dpfd is in root user, adjust caps for its thread
D/DPFD ( 149): [DPFD] Wait Request.....
I/DMAgent ( 147): DMAgent created
I/DMAgent ( 147): [DMAgent]register OK.
D/DMAgent ( 147): DMAgent Service is now ready
D/MobileLogD( 123): write "mobilelog start after boot, mode:0" to mblog
E/installd( 140): Failed to load liblbesec.so
I/installd( 140): add service shelld success!
W/installd( 140): service start entry 'shelld', flag :0
W/installd( 140): starting 'shelld'
E/ccci_fsd(0)( 118): md_fsd Ver:v1.00
I/Hald ( 133): Hald 1.1011 starting
D/ccci_fsd(1)( 118): /dev/ccci_fs is opend(600).
D/ccci_fsd(1)( 118): Check OTP...
D/Hald ( 133): Create ResetManager
D/Hald ( 133): Size of initial message: 6
D/Hald ( 133): [MTK_WIFI] family id = 20
D/Hald ( 133): Reset Manager Prepare Dummy command
D/Hald ( 133): Reset Manager Send Command for binding
D/Hald ( 133): Start ResetManager
E/ccci_fsd(0)( 119): md_fsd Ver:v1.00
E/ccci_fsd(2)( 119): /dev/ccci2_fs is not enabled(2).
D/MobileLogD/cache( 123): config autostart=0 same as current value
D/MobileLogD/cache( 123): config logpath=/mnt/sdcard same as current value
D/MobileLogD/cache( 123): config logsize=300 same as current value
D/MobileLogD/cache( 123): config AndroidLog=1 same as current value
D/MobileLogD/cache( 123): config KernelLog=1 same as current value
D/MobileLogD/cache( 123): config BTLog=1 same as current value
D/MobileLogD/cache( 123): config BTLog=1 same as current value
E/MobileLogD/cache( 123): cant get true log path through property
E/MobileLogD/cache( 123): true path is /mnt/sdcard
D/MobileLogD( 123): create local socket server success
D/Vold ( 116): Check whether nvram restore ready!
D/NVRAM ( 128): g_i4CFG_File_Count: 25
D/NVRAM ( 128): NVM_Init Max Lid: 43
D/NVRAM ( 128): Total nvram Lid number is 43
I/Netd ( 125): Netd 1.0 starting
W/InterfaceController( 125): Warning (Cannot load library: load_library(linker.cpp:745): library "/system/lib/libnetcmdiface.so" not found) while opening the net interface command library
D/agps ( 142): [agps] WARNING: [Main] mtk_agpsd is running ver=0.46
D/agps ( 142): [agps] WARNING: [Main] mkdir failure for /data/agps_supl/log reason=[File exists]
D/MtkAgpsNative( 142): SuplRawLog.bEnable:0
D/MtkAgpsNative( 142): SuplRawLog.szPath:/sdcard
D/MtkAgpsNative( 142): SuplRawLog.szFile:agps_raw.log
D/MtkAgpsNative( 142): SuplSslLog.bEnable:0
D/MtkAgpsNative( 142): SuplSslLog.szPath:/sdcard
D/MtkAgpsNative( 142): SuplSslLog.szFile:agps_ssl.log
I/MtkAgpsNative( 142): Enter up_int_init
I/MtkAgpsNative( 142): Enter mtk_agps_up_init
D/MtkAgpsNative( 142): FS_CreateDir: /data/agps_supl
W/MtkAgpsNative( 142): -> errno(EEXIST) => dir already exists
D/MtkAgpsNative( 142): ############ mtk_agps_up_init --> agps_disable_enalbe_times = 1 ############
Click to expand...
Click to collapse