Hi there,
I would like to install CWM to my D605, but I'm unable to do that, cause my phone has KitKat and there's no way how to load JB to my phone.
KDZ flasher doesn't work for me, even I installed every possible driver (LG Unified Driver, B2C Tool, LG PC Suite) and try every possible mode (Download Mode, Recovery, PC Suite mode...) on phone.
I read, the problem is, if you have any other language version of Windows than English one. But I don't want to reinstall or install EN Win version just only for downgrade my phone to JB. Why LG has such a shi*ty software support?
Anyone knows a solution to that except installing english Windows?
Had same problems, KDZ flasher didn't recognize phone. I don't know how, but at last I could downgrade from KK to JB on non-english Windows.
So try again and again and don't resign. Remove all drivers, download from LG "USB Treiber" and "LG Mobile Service Tool" and install it. Don't connect phone to PC and boot in download mode, then connect to PC. Wait until Windows recognize phone and install drivers. Check in KDZ flasher, if it can see you phone.
Problem solved with LG Extractor and LG Flash Tool. I successfully flashed TOT file with JB.
Related
Hello, i'm upgrade p760 v20B to 20C in OTA. The phone rebooted and went in recovery. At the moment I can only get in recovery and S/W upgrade mode. I restored backups and install CM 10.1, AOKP.... In all earning error can't restore /data. At the moment I can not mount /sd-card.
If anyone can help me?
:crying:Sorry for bad English
arman4o said:
Hello, i'm upgrade p760 v20B to 20C in OTA. The phone rebooted and went in recovery. At the moment I can only get in recovery and S/W upgrade mode. I restored backups and install CM 10.1, AOKP.... In all earning error can't restore /data. At the moment I can not mount /sd-card.
If anyone can help me?
:crying:Sorry for bad English
Click to expand...
Click to collapse
Hello, i have de same problem yesterday and to resolve it I connect the phone in S/W Mode and run LG Mobile Support Tool.
It flash the original lg firmware so you need to install CWM recovery and root again.
I'm sorry for my bad english too.
In my LG mobile support tool can not connect to the phone ...
Writes: Checking the connection with the cell phone.. and again
Is your phone in s/w mode?
Yes,
1. scoot battery
2. Pressing Vol UP
3. Put usb cable
4. Enter into a phone S/W mode
5. Put the battery and run Lgmobile support tool
LG mobile support tool must work, try with another pc, install drivers and do the same process
Not working. I tried two other computers with two other cable ..
If it matters I unlocked bооtloader
EDIT: WORKS, I deleted 127.0.0.1 csmg.lgmobile.com127.0.0.1 csmgdl.lgmobile.com from the host file and the phone is connected
hi, I have the following problem
I installed the latest version of the drivers of lg P760 on Win 7 x64
install all drives except the "LGE Mobile USB Modem" needed to make the flash with the KDZ tool. I tried to remove all usb devices but does not work. I tried to uninstall and reinstall the drivers but nothing works.
how can I fix?:good:
tonysgh89 said:
hi, I have the following problem
I installed the latest version of the drivers of lg P760 on Win 7 x64
install all drives except the "LGE Mobile USB Modem" needed to make the flash with the KDZ tool. I tried to remove all usb devices but does not work. I tried to uninstall and reinstall the drivers but nothing works.
how can I fix?:good:
Click to expand...
Click to collapse
What's error you got? What your phone model & software version?
For JB phone you may want to try using DIAG mode when flash kdz instead of Emergency. Just let your phone turn on, it will go to software update mode automatically.
I want to try to unlock my p769's bootloader but i cant get the lg flashing tool to work.
heres what i did
1.i made the change to the host file
2.i installed the msxml parser and the b2c appsetup
3.installed the lgunited drivers
4.installed drivers for all 4 modes pc connection on my phone.
5.ran https.exe its on port 9002
6.i ran the uptestex_mod2_mrwin.exe
7.connected my phone
8.chose the v20b kdz
9.put it in diag mode and 3QGCT
10.choose nomal web upgrade
11.chose upgrade start but then the lgmobile support tool opens. not the flashing tool.
I also installed the programs with Win xp sp3 compatibilty and ran them with it to.
i did all this twice and it still doesnt want flash.
Thanks in advance!
Hay guys,
I got a big problem, yesterday I tryed to downgrade my brothers LG P760 and made a big misstake.
When I tryed to go into 'recovery mode', I just used the wrong keys (VOL DOWN + HOME + POWER ON/OFF). Now my phone doesn't boot up anymore, it just hangs at the LG bootlogo. I can go into 'S/W Mode' and into 'Fastboot Mode', but if I go into 'Fastboot Mode' my decive driver is hangs in a loop. Hanging all day and night to fix this problem, but I can't do anything.... I hope anyone can help me!
Windows OS: Windows 10
Phone: LG P760
ROM: CM 12.1
Thanks a lot!
See this page... http://lgflashtool.com/
puntoazul said:
See this page... http://lgflashtool.com/
Click to expand...
Click to collapse
Yea, this is the last tool I used and it went fast as nothing else yet, but while flashing the stock firmware it doesn't continue at 60% and saying "Verifying phone connection...".
And does it work with Windows 10?
Thanks for your help!
Fastboot & L9 & Win10 ain't good for me, too.
But D/L mode is more basic and thus more reliable. And there are basically two ways to unbrick, online with the official LG tool, and with LG Flash Tool 2014 and a KDZ image. Only the first option works without problems for me.
lecorbusier said:
Fastboot & L9 & Win10 ain't good for me, too.
But D/L mode is more basic and thus more reliable. And there are basically two ways to unbrick, online with the official LG tool, and with LG Flash Tool 2014 and a KDZ image. Only the first option works without problems for me.
Click to expand...
Click to collapse
Thanks for your time and answere!
Yea, I also think it's the Windows 10 which makes problems, I can't get any driver installed for this P760.
So I can just download the official lg support tool and try it this way?
EDIT: And btw... I did exactly the second step already and had also problems. I didn't did the D/L mode step yet. Can you explain how it works, I don't know how to come into D/L mode.
Thanks!
In da other Thread! In D/L mode the phone should get recognized by LG driver and a virtual com port be installed. LG software only works with LG drivers, and they sometimes don't recognize the phone, except in D/L mode.
Fir other purposes the Google SDK usb drivers are best, but then there's the Fastboot issue. But ADB should work.
lecorbusier said:
In da other Thread! In D/L mode the phone should get recognized by LG driver and a virtual com port be installed. LG software only works with LG drivers, and they sometimes don't recognize the phone, except in D/L mode.
Fir other purposes the Google SDK usb drivers are best, but then there's the Fastboot issue. But ADB should work.
Click to expand...
Click to collapse
The 'LG Mobile Support Tool' says that the right firmeware is already installed and then he is starting to download V20O with 599,15MByte. But the thing is, that the phone will just go out of the S/W mode while the 'LG Mobile Support Tool' is downloading the V20O. After the phone switched off, my driver is looping and always saying it can't recnogrize it. It does it like 20 times and then the phone will go on and LG logo appears. Nothing more.... :/
My P760 never quit D/L mode before or during download. Afterwards LGs recovery may appear, which calls itself something like Service Mode. This is not good, though the stock rom should initially work, but there are problems when rooting etc. In such a case leave phone connected and flash a second time. The phone should reboot to the launcher, if successful.
Hey, its my first post here
I have a Trouble
this morning, I tried to isntall CM13, before I complete the download, tried to install bootloader, i dont remenber the name
I reboot the android
and fall of on a looping of LG logo screen, I pluged on PC windows, install LG Mobile support tool, he reconize my device, only... and say my OS is on the last Update
I tried everything
Take off batery, press the butons to make anything
And I have the Idea to enter in the emergency mode
with this I can download the driver, and windows reconize my device...
I tried ADB
but he dont reconize the device
Anyone can help? I have a CM13 here, for my device, and my PC...