i flashed my p4000 to the new rom, and my pst info cleared, which i have written down, but when i go to enter the new info in, it asks me for a unlock code...
in all the tuts i read it never told me how to check it or anything i dont know what the unlock code would be, i also bought it used, anyone know?
i cant use my phone until i fix this, and i really need my phone tonight.
Unlock code for the SIM or the phone? I presume theres nothing on your device till now, why not hard-reset or upgrade to another ROM?
Regards,
Carty..
htc p4000 have no sim cards.
im doing the ##778 to get into the PST menu, then when i try to edit it, to input my #, it asks me for an unlock code... :S
have you tried all 0s or 123456 or your phone number?
yes i tried a couple.
000000
123456
654321
i havnt changed the code...anyone know how to change it through an app or the default code?
arg!
i need my phone tonight.
Berserk87 said:
yes i tried a couple.
000000
123456
654321
i havnt changed the code...anyone know how to change it through an app or the default code?
arg!
i need my phone tonight.
Click to expand...
Click to collapse
If it's anything like sprint, then a simple call to your carrier should remedy the problem. with sprint it's called an "MSL" and they give it to you when programming your phone. So if you call and tell them that you need to 'reprogram' your phone, they should walk you through the steps along with giving you the code.
if i reflash it with the nueROM v2 build 5022, its a sprint rom...so that would mean i could use the 000000 as the unlock code?
also, after flashing to the new roms, my phone continually reset...would go on for a minute then reset... thats why i went back to my default rom, but now its asking for an unlock code >.>
Unzip this to your phone. Take your battery off and write down your Hex ESN. Run GetSPC.exe. Type your Hex ESN in the first box. The second box will be your unlock code.
*edit - removed file, missing keygen and someone linked to it on the next page.
k ill try that out, thank you.
any reason why my phone would be constantly reseting after installing the new roms?
k.
my EST is
but when i type that in, its saying "could not link to dll"
?
If I were you I would edit that post and remove that ESN # ASAP, people can use that to steal your service.
jjlwork said:
If I were you I would edit that post and remove that ESN # ASAP, people can use that to steal your service.
Click to expand...
Click to collapse
****, i was worried something like that could happen.
it should be the hex of that number though right?
do i include the first 3 letters?
k i converter the esn to hex and its still not working >.>
Berserk87 said:
k i converter the esn to hex and its still not working >.>
Click to expand...
Click to collapse
you might try the program found here:
http://forum.xda-developers.com/showthread.php?p=1541466 (it's the program called GetSPC)
i tried it on my phone and it provided an MSL number. hafta admit, tho - the MSL it gave me didn't work (and it differs from the MSL i have written down for my phone).
i might also suggest that you SEARCH...it's what I did to find the above. you might also try calling your carrier and ask them what the unlock code is.
OH -- use a HEX version of the ESN, and use ALL CAPS for any letters in the HEX version. It still may provide you with an invalid MSL...but worth a shot.
Make sure you are using the correct number for ESN, just converting the number from the back of your phone to hex will not work. Click program settings and device information on the bottom it will say ESN followed by a 8 digit hex number..that is the hex esn, you then put that in GetSPC and it will give you your 6 digit master unlock code. Dial ##6digitcodeSEND and it will open up to a place with 2 settings that can be changed, enter your 10 digit phone number for these two settings.
If you still can't get it, call Telus & tell them you can't make any calls, they will walk you thru the reprogramming process.
jjlwork said:
Make sure you are using the correct number for ESN, just converting the number from the back of your phone to hex will not work. Click program settings and device information on the bottom it will say ESN followed by a 8 digit hex number..that is the hex esn, you then put that in GetSPC and it will give you your 6 digit master unlock code. Dial ##6digitcodeSEND and it will open up to a place with 2 settings that can be changed, enter your 10 digit phone number for these two settings.
If you still can't get it, call Telus & tell them you can't make any calls, they will walk you thru the reprogramming process.
Click to expand...
Click to collapse
ahhhh
thats what i was doing :loollll
k, i entered my hex number and its still saying "cant link to dll"
i got like 15 minutes to figure this out :O
k the "phonetools" the other guy linked too was missing files, so it wouldnt work either way, lets try the real one >.>
WORKED, AWESOME.
now to test it out
Berserk87 said:
k the "phonetools" the other guy linked too was missing files, so it wouldnt work either way, lets try the real one >.>
Click to expand...
Click to collapse
Don't know why it didn't work, it's the exact same program. The only thing I took out was the PPC 2003 version so you wouldn't run that by mistake.
*edit - just downloaded it & it's missing the keygen. I don't know how that happened, sorry. I would've just linked to the original but I couldn't remember where I'd gotten it initially.
sorry for bother, i have try to search, and follow some post about updating smsc on galaxy but with no luck. Hope someone can help me.
puttin *#*#4636#*#* on phone thr SMSC its stuck to 00
i have try to put my smsc number from my carrier (tim italy) +393359609600
I have try lot of time with many change on number like +39-3359609600 00393359609600.
No luck, cant update...
then i have try to change on sms go program, i have set on smsc menu the +393359609600 but im not able to send SMS.
Can someone help me to put the correct number, coz i have read to change on HEX or somenthing but i dont know how to do it...
ty vm!
ok got it the solution.
can be closed.
i remember back in the days where there was a code to enter in the dialer which would tell you if the phone was currently locked or not. any1 know whats that code ?
I entered some i found on google but all i got was some weird pop up which said something about USSID errors or something similar. Thanks!
There are many codes but they all tell me the same error
did you try:
*#7465625#
?
Hello there, I want to unlock this phone but I can't find the PUK code... when I try to open the phone it says:
"Sim network pin blocked.Enter pin network PUK" , is there anyway to find the password ;
DeathSsHanD said:
Hello there, I want to unlock this phone but I can't find the PUK code... when I try to open the phone it says:
"Sim network pin blocked.Enter pin network PUK" , is there anyway to find the password ;
Click to expand...
Click to collapse
If its your phone you must have set the sim lock, therefore you must know the pin....
If its your phone then call your carrier and they will give you it.
If its not your phone, there's nothing you can do without the previous owner, and his/her details to get the PUK code.
Hello everybody.
I was trying to run a test with this famous app downloaded from the play store.The first screen after opening says: "Enter your key code". A few sites suggested that the key code is the pin code.The default pin code is 1234 and I did not change it.I tried 1234 and 0000 but both of them wont work- I got a message like "Oops!There is a problem with the internet". I can assure you there is no problem with the internet...
I tried to put the serial number and imei number but it did not go....I tried to install it on my Samsung Note 20 ultra-same results.
Can anybody help or have any idea what is the key code?Thanks.
P.S - I already sent an email to the app`s support a few days ago but there was no reply so far.