I've had this problem since December or so now, (whenever CM11 came out) and I've tried asking for help everywhere, including here before. But I'm sending out one final hail mary request. For some reason, whenever I download a 4.4 Rom for my phone and I have my wifi running, the phone will freeze after I hit the power button and will not turn the screen back on at all or it will freeze while I'm using it. The only way to get the phone back on is by doing a battery pull.
Here is everything I've tried: various Roms, various kernels, different steps to install (full wipe, wipe cache, etc.), I've even unrooted and gone back to stock to start from scratch and it still happens.
If anyone could please help me out, I'm stuck running 4.3 and I want to be able to run 4.4. Hopefully I can finally find a fix for this issue I'm having. I don't think it's faulty hardware because one other person or so has had the problem as well. Help me XDA, you're my only hope!
What firmware do you have? Since you mentioned different kernels, are you still on MDK? Have you ever taken any if the OTA updates?
Sent from my SCH-I545 using Tapatalk
jmgib said:
What firmware do you have? Since you mentioned different kernels, are you still on MDK? Have you ever taken any if the OTA updates?
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
Yeah I'm still on MDK. And no I never did an OTA.
What recovery are you using?
It happens to you all the time now? I've been so busy with work and school now that I hardly have any time at all. I really do want to pinpoint the issue before I throw this thing out the window....lol
thesoldier said:
It happens to you all the time now? I've been so busy with work and school now that I hardly have any time at all. I really do want to pinpoint the issue before I throw this thing out the window....lol
Click to expand...
Click to collapse
Me too ha, like I said this is my final hail mary. If I can't get it fixed I'm going to buy a new phone and I really don't want to have to do that. I'm praying one final time for someone to figure a fix for me.
joshm.1219 said:
What recovery are you using?
Click to expand...
Click to collapse
I've used CWM and TWRP. Currently using TWRP.
Nwwolf1 said:
I've used CWM and TWRP. Currently using TWRP.
Click to expand...
Click to collapse
This what I would do if I was you.
Flash full wipe MDK tar file
Root using towelroot
Install latest TWRP via flashify
Flash jrkruse's stock 4.4.2 NC5 rom for MDK, picking the stock talexop kernel in aroma.
If that doesn't work, I don't know what to tell you.
joshm.1219 said:
This what I would do if I was you.
Flash full wipe MDK tar file
Root using towelroot
Install latest TWRP via flashify
Flash jrkruse's stock 4.4.2 NC5 rom for MDK, picking the stock talexop kernel in aroma.
If that doesn't work, I don't know what to tell you.
Click to expand...
Click to collapse
Will I be able to still run AOSP Roms or will I have to stick with TW?
Nwwolf1 said:
Will I be able to still run AOSP Roms or will I have to stick with TW?
Click to expand...
Click to collapse
No you can still run AOSP roms, the only way you can lose MDK bootloader is if you flash firmware in Odin that is anything other than MDK, or if you take an OTA update while completely stock.
I guess I should say that after rooting stock MDK via towelroot, use a root explorer to delete SDM.apk and FWupgrade.apk from /system or /system/priv-app to prevent the phone from auto-updating before you flash a custom rom.
joshm.1219 said:
No you can still run AOSP roms, the only way you can lose MDK bootloader is if you flash firmware in Odin that is anything other than MDK, or if you take an OTA update while completely stock.
I guess I should say that after rooting stock MDK via towelroot, use a root explorer to delete SDM.apk and FWupgrade.apk from /system or /system/priv-app to prevent the phone from auto-updating before you flash a custom rom.
Click to expand...
Click to collapse
I'll definitely give it my best shot. Thank you!
Nwwolf1 said:
I'll definitely give it my best shot. Thank you!
Click to expand...
Click to collapse
Good luck, just letting you know, that full wipe tar file will wipe EVERYTHING. So make sure you have anything that you care about backed up on am external SD card or the cloud.
joshm.1219 said:
Good luck, just letting you know, that full wipe tar file will wipe EVERYTHING. So make sure you have anything that you care about backed up on am external SD card or the cloud.
Click to expand...
Click to collapse
Yeah I've got my music and photos backed up on my external SD and contacts backed with Google, those are really the only things I care about.
Related
I was running eclipse 4.2.2 and spent two days flashing Vario's Roms and modems
I ended up going back to eclipse 4.2.2 and now every time I run a system process my phone freezes. Black screen. Sometime reboots.
I was doing full wipes or data/cache/davlik every time.
I can't figure it out. Pressing volume up or down freezes and lags the phone.
Pressing the phone icon lags and submitting the call lags the phone.
On top of that my mp3s on my sdcard no longer work on Google music...
Any idea how to fix this? My phone is almost useless except for third party apps. Thanks
gt5oh said:
I was running eclipse 4.2.2 and spent two days flashing Vario's Roms and modems
I ended up going back to eclipse 4.2.2 and now every time I run a system process my phone freezes. Black screen. Sometime reboots.
I was doing full wipes or data/cache/davlik every time.
I can't figure it out. Pressing volume up or down freezes and lags the phone.
Pressing the phone icon lags and submitting the call lags the phone.
On top of that my mp3s on my sdcard no longer work on Google music...
Any idea how to fix this? My phone is almost useless except for third party apps. Thanks
Click to expand...
Click to collapse
Give us more info.. I take it you are mdk with loki exploit...right?
safestrap enabled, Hyperdrive driven
decaturbob said:
Give us more info.. I take it you are mdk with loki exploit...right?
safestrap enabled, Hyperdrive driven
Click to expand...
Click to collapse
Mdk correct. Loki
I'm using cwm recovery
Volume up and down is also bogging down the phone..
Been messing with this for hours
No matter what rom I run the core system is messed up
I ODIN back to stock.
What happens if I accept the stock OEM software upgrade?
gt5oh said:
Been messing with this for hours
No matter what rom I run the core system is messed up
Click to expand...
Click to collapse
Have you considered odin the stock mdk full wipe image file to start over?
safestrap enabled, Hyperdrive driven
decaturbob said:
Have you considered odin the stock mdk full wipe image file to start over?
safestrap enabled, Hyperdrive driven
Click to expand...
Click to collapse
yeah I did that, im on stock mdk 4.2.2 right now, software update popped up, if I take it will I be able to root in the future?
gt5oh said:
yeah I did that, im on stock mdk 4.2.2 right now, software update popped up, if I take it will I be able to root in the future?
Click to expand...
Click to collapse
Root yes. Custom recovery, no. Your only option would be Safestrap and compatible TW roms. Try to do whatever it takes to stay on MDK.
Sent from my NCC 1701 using Tapatalk 4
riker147 said:
Root yes. Custom recovery, no. Your only option would be Safestrap and compatible TW roms. Try to do whatever it takes to stay on MDK.
Sent from my NCC 1701 using Tapatalk 4
Click to expand...
Click to collapse
ok got it thanks.. is there a stock but rooted mk2 rom that you can install from mdk with CWM?
gt5oh said:
ok got it thanks.. is there a stock but rooted mk2 rom that you can install from mdk with CWM?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2581072
There's a stock rooted MK2 ROM you can flash in CWM. Just don't take that OTA!
Sent from my SCH-I545 using Tapatalk
gt5oh said:
yeah I did that, im on stock mdk 4.2.2 right now, software update popped up, if I take it will I be able to root in the future?
Click to expand...
Click to collapse
if you are mdk, I would NEVER take OTA as that will cause you to lose custom recoveries and ability to rom any type of ROM and custom kernels. There is a way to continue forward with MDK but I don't know what the process is as I don't have MDK myself
Yes I rejected the update.
Instead I put on CWM recovery and flashed the TW stock 4.3 build
Was running Eclipse 4.2.2 before
So I had originally had TWRP/Hyperdrive on my phone, and switched to CWM/Cyanogenmod. I noticed now that I seem to have two different recoveries on my phone, because if I hold up+home+power I can go to a different version of CWM Recovery than if I use the Rom Manager app to boot into recovery. How would I rectify this? Would it involve wiping the /boot partition? I don't know where/how recoveries are stored so I don't understand how I can have two.
Doing a fresh install of a ROM has not resolved this by the way. And actually currently, I can't hold the buttons and boot into recovery at all, it gets stuck on the Samsung logo. I can only get into recovery via Rom Manager or Reboot options if I'm in android.
Markstache said:
So I had originally had TWRP/Hyperdrive on my phone, and switched to CWM/Cyanogenmod. I noticed now that I seem to have two different recoveries on my phone, because if I hold up+home+power I can go to a different version of CWM Recovery than if I use the Rom Manager app to boot into recovery. How would I rectify this? Would it involve wiping the /boot partition? I don't know where/how recoveries are stored so I don't understand how I can have two.
Doing a fresh install of a ROM has not resolved this by the way. And actually currently, I can't hold the buttons and boot into recovery at all, it gets stuck on the Samsung logo. I can only get into recovery via Rom Manager or Reboot options if I'm in android.
Click to expand...
Click to collapse
I would just Odin back to stock MDK and start fresh and choose whichever recovery suits you. I had to do the same a while back myself
Sent from my SCH-I545 using Tapatalk
Mistertac said:
I would just Odin back to stock MDK and start fresh and choose whichever recovery suits you. I had to do the same a while back myself
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
I've done that so many times.
Markstache said:
I've done that so many times.
Click to expand...
Click to collapse
My fault ...I see where you adressed that in the last part of your post. I'm no expert either on how recoveries are stored and executed.
I would think though that flashing stock mdk would fix this as it did for me. I used ROM manager to install cwm then I flashed Philz and haven't had a problem since. Hope someone else can help you.
Sent from my SCH-I545 using Tapatalk
Mistertac said:
My fault ...I see where you adressed that in the last part of your post. I'm no expert either on how recoveries are stored and executed.
I would think though that flashing stock mdk would fix this as it did for me. I used ROM manager to install cwm then I flashed Philz and haven't had a problem since. Hope someone else can help you.
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
The only way to fix is to Odin back to factory image and start over.
Sent from my SCH-I545 using xda app-developers app
cbmggm said:
The only way to fix is to Odin back to factory image and start over.
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
Yea that's what I said before too but the op said they've done that many times with no luck...
Sent from my SCH-I545 using Tapatalk
cbmggm said:
The only way to fix is to Odin back to factory image and start over.
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
That's what I would have figured would fix it, because I'm pretty sure that's supposed to wipe /boot, but I found out I cannot flash kernels on my phone for some reason and when having to fix softbricks while experimenting with why it doesn't work and flashing different kernels, I had to do that whole process so many times I can go from softbrick back to where I'm at now in about 20 minutes.
Is your device in factory mode when using touchwiz roms?
jamesd1085 said:
Is your device in factory mode when using touchwiz roms?
Click to expand...
Click to collapse
I have no idea what you mean, and I'm not using anything touchwiz based anymore.
Markstache said:
I have no idea what you mean, and I'm not using anything touchwiz based anymore.
Click to expand...
Click to collapse
OK...well try something real quick for me...use a root manager and open your efs folder...are the files still there...if not your efs folder has been formatted to the incorrect format... That would explain funky recovery issues and not being able to flash kernels...that's the only things I can think of
jamesd1085 said:
OK...well try something real quick for me...use a root manager and open your efs folder...are the files still there...if not your efs folder has been formatted to the incorrect format... That would explain funky recovery issues and not being able to flash kernels...that's the only things I can think of
Click to expand...
Click to collapse
It sure is there and has files in it.
What is that folder? Should I delete the contents?
Markstache said:
It sure is there and has files in it.
What is that folder? Should I delete the contents?
Click to expand...
Click to collapse
Definitely don't delete your efs folder. Actually it's good practice to back it up
Sent from my SCH-I545 using Tapatalk
Markstache said:
It sure is there and has files in it.
What is that folder? Should I delete the contents?
Click to expand...
Click to collapse
No!!!!...you will lose your number and all data capability...just wanted to make sure everything was still mounting properly... I'm at a loss as to what else could be causing your issues
Markstache said:
I have no idea what you mean, and I'm not using anything touchwiz based anymore.
Click to expand...
Click to collapse
I'd find someone like Philz or a TWRP compiler to ask if u haven't already gone that route. I'm sure one of them will know. Hopefully [emoji41]
Sent from my SCH-I545 using Tapatalk
Something just occured to me. When flashing back to stock with odin I always use the nowipe image because it's all I can find. I think that technically means boot was never wiped. Would that explain my phenomena? Also where to find stock that will wipe?
Markstache said:
Something just occured to me. When flashing back to stock with odin I always use the nowipe image because it's all I can find. I think that technically means boot was never wiped. Would that explain my phenomena? Also where to find stock that will wipe?
Click to expand...
Click to collapse
I've always used this one
http://forum.xda-developers.com/showthread.php?t=2289325
I'm not 100% if its no wipe as it doesn't say. But it you haven't tried this one yet may be worth a shot
Sent from my SCH-I545 using Tapatalk
Mistertac said:
I've always used this one
http://forum.xda-developers.com/showthread.php?t=2289325
I'm not 100% if its no wipe as it doesn't say. But it you haven't tried this one yet may be worth a shot
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
^^^this should fix you up...but backup everything you can to external SD or computer...when it says full wipe its no joke
Mistertac said:
I've always used this one
http://forum.xda-developers.com/showthread.php?t=2289325
I'm not 100% if its no wipe as it doesn't say. But it you haven't tried this one yet may be worth a shot
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
So I flashed that one via Odin, followed the guide to root and everything step by step, and now that I'm back on stock kernel and want to install CWM Recovery, I downloaded Rom Manager and hit install recovery and it says everything worked but if I boot into recovery it's just the android stock recovery.
EDIT: Another thing I thought of. Could the fact that at one point I used this method to install CWM recovery on my phone have caused there to be two different recoveries running parallel?
http://galaxys4root.com/galaxy-s4-r...on-att-or-verizon-galaxy-s4-sgh-i337sch-i545/
UPDATE: Using this method I installed the latest version of CWM Recovery Touch but Rom Manager still thinks the normal version is installed, though now if I hit reboot to recovery from the app it actually takes me to the touch instead of a separate one. Is the app dumb or do I still have an issue? Also I cannot install kernels without tripping the count and having my phone tell me I need to go to a verizon store.
http://wiki.cyanogenmod.org/w/Install_CM_for_jfltevzw
Markstache said:
So I flashed that one via Odin, followed the guide to root and everything step by step, and now that I'm back on stock kernel and want to install CWM Recovery, I downloaded Rom Manager and hit install recovery and it says everything worked but if I boot into recovery it's just the android stock recovery.
EDIT: Another thing I thought of. Could the fact that at one point I used this method to install CWM recovery on my phone have caused there to be two different recoveries running parallel?
http://galaxys4root.com/galaxy-s4-r...on-att-or-verizon-galaxy-s4-sgh-i337sch-i545/
UPDATE: Using this method I installed the latest version of CWM Recovery Touch but Rom Manager still thinks the normal version is installed, though now if I hit reboot to recovery from the app it actually takes me to the touch instead of a separate one. Is the app dumb or do I still have an issue? Also I cannot install kernels without tripping the count and having my phone tell me I need to go to a verizon store.
http://wiki.cyanogenmod.org/w/Install_CM_for_jfltevzw
Click to expand...
Click to collapse
ROM manager may actually be the issue.
And as far as installing kennels I've never had an issue myself. The last link you posted is about flashing the md2 kernel in order to root the phone. Do you mean that?? Or installing say a KToonsez kernel after you're already rooted and have your custom recovery?
Sent from my SCH-I545 using Tapatalk
Mistertac said:
ROM manager may actually be the issue.
And as far as installing kennels I've never had an issue myself. The last link you posted is about flashing the md2 kernel in order to root the phone. Do you mean that?? Or installing say a KToonsez kernel after you're already rooted and have your custom recovery?
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
As in installing a KT kernel after rooting and having a custom recovery and ROM on my phone. Right now I have three 3/22 nightly cyanogen up and running but as soon as I install kt it trips the Verizon security and on have to flash back to stock kernel to use my phone. Booting into Odin and canceling out to restart does not let me get past the yellow triangle
Wow. Bonehead mistake. I went from Sarge's 4.4.2 rooted rom to Hyperdrive 16.1 via safestrap and I forgot to flash the nc5 module before rebooting and now my wifi wont work and I can't reboot into safestrap.
Anyone know what I can do to recover wifi/safestrap?
tjhooker4 said:
Wow. Bonehead mistake. I went from Sarge's 4.4.2 rooted rom to Hyperdrive 16.1 via safestrap and I forgot to flash the nc5 module before rebooting and now my wifi wont work and I can't reboot into safestrap.
Anyone know what I can do to recover wifi/safestrap?
Click to expand...
Click to collapse
did you flash su before you rebooted?
If you didn't do that you will most likely have to start the process completely over....
decaturbob said:
did you flash su before you rebooted?
If you didn't do that you will most likely have to start the process completely over....
Click to expand...
Click to collapse
Eeek. I did not. When you say start the whole process over, what are you referring to? Will I even be able to use saferoot from 4.4.2 HD16.1?
*edit: I should add - I don't have root on this ROM.
tjhooker4 said:
Eeek. I did not. When you say start the whole process over, what are you referring to? Will I even be able to use saferoot from 4.4.2 HD16.1?
*edit: I should add - I don't have root on this ROM.
Click to expand...
Click to collapse
I mean if you did the upgrade..downgrade method by surge...you have to start completely over...same with whatever method you used. Best to make a checklist as you missed several key steps
sent by baja kitkat S4
decaturbob said:
I mean if you did the upgrade..downgrade method by surge...you have to start completely over...same with whatever method you used. Best to make a checklist as you missed several key steps
sent by baja kitkat S4
Click to expand...
Click to collapse
I know. Will do. And thanks for the tips/help. Very much appreciated.
Would you advise using this method?
tjhooker4 said:
I know. Will do. And thanks for the tips/help. Very much appreciated.
Would you advise using this method?
Click to expand...
Click to collapse
I don't know anything about that. I did surge's method after I did a full wipe MK2 to my phone. Important to have a check list
I forgot to add the SU file after flashing Echoe Rom and I had to start all over. In your case, I don't think you even have to flash SU after flashing Hyperdrive 16.1 bc SU is cooked into the Rom.
Sent from my SCH-I545 using XDA Premium 4 mobile app
dm1105 said:
I forgot to add the SU file after flashing Echoe Rom and I had to start all over. In your case, I don't think you even have to flash SU after flashing Hyperdrive 16.1 bc SU is cooked into the Rom.
Sent from my SCH-I545 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You do have to flash it with HD, it never hurts regardless. With your phone running partitions from different firmwares baked in SU won't always work
Sent from my HTC6600LVW using Tapatalk
joshm.1219 said:
You do have to flash it with HD, it never hurts regardless. With your phone running partitions from different firmwares baked in SU won't always work
Sent from my HTC6600LVW using Tapatalk
Click to expand...
Click to collapse
Sounds like sound advice to me :good:. I don't see how it can hurt either. Better safe than sorry.
There is a root now, but no WiFi?
First off, I want to thank everyone involved for rooting NC5! :highfive:
Now, onto my problem. I still can't seem to get Wi-Fi working on my NC5/Verizon S4! I have the Hyperdrive 16.1 ROM installed, and everything works well except I just CANNOT turn on my Wi-Fi! I've tried flashing modem modules and such through Odin and SafeStrap, but nothing seems to work.
Any ideas on what I should do that DOESN'T include wiping and starting over?
Thanks,
JB
(PS -- This is my first post, so be gentle, LOL!)
ShnikeJSB said:
First off, I want to thank everyone involved for rooting NC5! :highfive:
Now, onto my problem. I still can't seem to get Wi-Fi working on my NC5/Verizon S4! I have the Hyperdrive 16.1 ROM installed, and everything works well except I just CANNOT turn on my Wi-Fi! I've tried flashing modem modules and such through Odin and SafeStrap, but nothing seems to work.
Any ideas on what I should do that DOESN'T include wiping and starting over?
Thanks,
JB
(PS -- This is my first post, so be gentle, LOL!)
Click to expand...
Click to collapse
Gigilies wifi fix works for many. You flash the zip in safe strap
Sent from my SCH-I545 using Tapatalk
ShnikeJSB said:
First off, I want to thank everyone involved for rooting NC5! :highfive:
Now, onto my problem. I still can't seem to get Wi-Fi working on my NC5/Verizon S4! I have the Hyperdrive 16.1 ROM installed, and everything works well except I just CANNOT turn on my Wi-Fi! I've tried flashing modem modules and such through Odin and SafeStrap, but nothing seems to work.
Any ideas on what I should do that DOESN'T include wiping and starting over?
Thanks,
JB
(PS -- This is my first post, so be gentle, LOL!)
Click to expand...
Click to collapse
Root it with Towelroot. Then you can install Safestrap and then flash the modules.
As a MDK owner lately my wifi on HD16.1 turns on fine, but i cant data to go through (send receive nothing at all, worse than having 1 bar on 3g bad). I'm headed to my girls in a bit for dinner where i'll hop on her wifi and find out if its junky comcast router i have or ROM related.
Edit/update: It's my home router right now on at+t n no issues with six AL or data
I have already rooted with Towelroot, and can boot into Safestrap fine. I've tried flashing "gogolies-wififix-VZW-retail-NC5-w-modules-SS.zip" and "I545VRUFNC5_modem.zip" and "jfltevzw-NC5-modules.zip" in Safestrap, as well as "modem-only-NC5-odin.tar" in Odin. Nothing works.
ShnikeJSB said:
I have already rooted with Towelroot, and can boot into Safestrap fine. I've tried flashing "gogolies-wififix-VZW-retail-NC5-w-modules-SS.zip" and "I545VRUFNC5_modem.zip" and "jfltevzw-NC5-modules.zip" in Safestrap, as well as "modem-only-NC5-odin.tar" in Odin. Nothing works.
Click to expand...
Click to collapse
there is a standalone wifi fix zip that gigilie put out, flash that "gogolies-wififix-VZW-FN2-NC2-w-modules-SS.zip" it may work better for you
WOOHOO!
decaturbob said:
there is a standalone wifi fix zip that gigilie put out, flash that "gogolies-wififix-VZW-FN2-NC2-w-modules-SS.zip" it may work better for you
Click to expand...
Click to collapse
YESSSSSS!!!
:victory:
Thank you SO very much!!! I now have wifi back after flashing with the gogolie nc2 file you named! Phew, these data overages were killing me... What a load off my back!
ShnikeJSB said:
YESSSSSS!!!
:victory:
Thank you SO very much!!! I now have wifi back after flashing with the gogolie nc2 file you named! Phew, these data overages were killing me... What a load off my back!
Click to expand...
Click to collapse
No problem. ...I found this zip usually does the trick.
Sent from my SCH-I545 using Tapatalk
decaturbob said:
No problem. ...I found this zip usually does the trick.
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
Are you flashing the NC2 Gogolies fix on the nc5 base with safestrap? I did try that along with flashing Hyperdrive 16.1 and required SU zip file, that still did not allow my wifi to work.
oiram14 said:
Are you flashing the NC2 Gogolies fix on the nc5 base with safestrap? I did try that along with flashing Hyperdrive 16.1 and required SU zip file, that still did not allow my wifi to work.
Click to expand...
Click to collapse
same with me
Make sure you have the latest SuperSU, though. I already had HyperDrive 16.1 installed on NC5 BL, and Towelroot let me root once again. Put the "gogolies-wififix-VZW-FN2-NC2-w-modules-SS.zip" file on your SD card. Make sure you have SELinux mode set to "Permissive" with SELinux Mode Changer. Then, get SafeStrap 3.72 and the new SuperSU 2.00. Give SS the permissions in SU, open SS and reboot to flash the "gogolies-wififix-VZW-FN2-NC2-w-modules-SS.zip" file. Reboot, and you should have Wi-Fi again!
***first of All I'm only making a new thread because I haven't found my specific issue anywhere else (even though its a common issue)***
SO...I need some help with my S4 ASAP!! I recently flashed a new rom (Hyperdrive 16.1 the link is: http://forum.xda-developers.com/showthread.php?t=2301724), Wiped Data/Factory Reset, Wiped cache and dalvik cache. I also did the format data where you had to type in "yes." I did it all in TWRP. Then after using my phone for a few hours I decided to reboot it. Now its stuck in the Samsung "Custom" screen with the lock (unlocked icon).
I cannot seem to be able to go into recovery mode as well. I'm not sure what build version my phone uses, and since I can't boot the phone i don't know what to do. What do you recommend I do? I was also using android 4.4.2....
Should I Odin back to factory and then re root?
This video seems to be very useful, and I want to follow it but what should i do if I don't know the build?
https://www.youtube.com/watch?v=GL8XwuRYoWU
Thanks for youre help XDA,
Dany
Danylevy12 said:
***first of All I'm only making a new thread because I haven't found my specific issue anywhere else (even though its a common issue)***
SO...I need some help with my S4 ASAP!! I recently flashed a new rom (Hyperdrive 16.1 the link is: http://forum.xda-developers.com/showthread.php?t=2301724), Wiped Data/Factory Reset, Wiped cache and dalvik cache. I also did the format data where you had to type in "yes." I did it all in TWRP. Then after using my phone for a few hours I decided to reboot it. Now its stuck in the Samsung "Custom" screen with the lock (unlocked icon).
I cannot seem to be able to go into recovery mode as well. I'm not sure what build version my phone uses, and since I can't boot the phone i don't know what to do. What do you recommend I do? I was also using android 4.4.2....
Should I Odin back to factory and then re root?
This video seems to be very useful, and I want to follow it but what should i do if I don't know the build?
https://www.youtube.com/watch?v=GL8XwuRYoWU
Thanks for youre help XDA,
Dany
Click to expand...
Click to collapse
Were you using SafeStrap or TWRP... that may help with what build you were on since your not sure and if you were MDK you don't want to Odin a different firmware and lock your phone up.
If you don't know.. What other ROMs have you flashed successfully before? Have you flashed custom kernels before?
Or did you have to flash kernel modules when flashing TW ROMs...
HD 16.1 needs to be on either MDK or a SafeStrap with 4.4.2 base so most likely you were on 4.3 base is my guess until you provide more info.
Sent from my SCH-I545 using Tapatalk
Mistertac said:
Were you using SafeStrap or TWRP... that may help with what build you were on since your not sure and if you were MDK you don't want to Odin a different firmware and lock your phone up.
If you don't know.. What other ROMs have you flashed successfully before? Have you flashed custom kernels before?
Or did you have to flash kernel modules when flashing TW ROMs...
HD 16.1 needs to be on either MDK or a SafeStrap with 4.4.2 base so most likely you were on 4.3 base is my guess until you provide more info.
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
So Unfortunately i did a big mistake. I didn't realize I was still using MDK, and then I used Odin to upgrade to NC5
1. Can i Odin (full wipe) to MDK, or too late?
2. If not, should I considering doing this downgrade http://forum.xda-developers.com/showthread.php?t=2720163 ??
Danylevy12 said:
So Unfortunately i did a big mistake. I didn't realize I was still using MDK, and then I used Odin to upgrade to NC5
1. Can i Odin (full wipe) to MDK, or too late?
2. If not, should I considering doing this downgrade http://forum.xda-developers.com/showthread.php?t=2720163 ??
Click to expand...
Click to collapse
Yikes !! That's too bad. I won't make you feel any worse lol
It is to late now. You can't go back to MDK
I'd say look for Surge's method on here. I have an MDK phone and have never done those methods but most seem to like his method. Up to you though.
Sent from my SCH-I545 using Tapatalk
Here's an easier method to get root on NC5, http://forum.xda-developers.com/showthread.php?t=2769480. Well more like a better explained one.
Sent from my OtterX running SlimKat
Poor guy updated an MDK phone... No it's not the end of the world.. Just a cell phone.. But that just plain sux!
Sent from my SCH-I545 using Tapatalk
Mistertac said:
Poor guy updated an MDK phone... No it's not the end of the world.. Just a cell phone.. But that just plain sux!
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
we see this happen as they dont really understand the rules of what can and can't be done with their phones. Unfortunate as we have a boatload of info in these forums that would them out,,,,,just need to take time to read first
Hi all,
I previously had my GS4 rooted on JellyBean, running the stock ROM and ClockworkMod. I upgraded my phone with the Verizon update to 4.4.2 when the update came out. I am now on the NC5 build. I am now trying to root my phone again, to run a different ROM. I still have Rom Manager and SuperSU on my phone from the last root.
I tried using Towelroot yesterday. It said the root was successful. I was able to go into Rom Manager and update CWM, which also said it flashed successfully. SuperSU is working. However, when I try to boot into CWM, it boots into the stock (I think) recovery. I'm trying to run a nandroid backup before I do anything drastic.
Do I have to wipe my device, and start fresh? It seems that CWM is installed, but the stock recovery is overriding it. Sorry if this is a noob-ish question. I've been out of the Root game since my Incredible.
Leach0789 said:
Hi all,
I previously had my GS4 rooted on JellyBean, running the stock ROM and ClockworkMod. I upgraded my phone with the Verizon update to 4.4.2 when the update came out. I am now on the NC5 build. I am now trying to root my phone again, to run a different ROM. I still have Rom Manager and SuperSU on my phone from the last root.
I tried using Towelroot yesterday. It said the root was successful. I was able to go into Rom Manager and update CWM, which also said it flashed successfully. SuperSU is working. However, when I try to boot into CWM, it boots into the stock (I think) recovery. I'm trying to run a nandroid backup before I do anything drastic.
Do I have to wipe my device, and start fresh? It seems that CWM is installed, but the stock recovery is overriding it. Sorry if this is a noob-ish question. I've been out of the Root game since my Incredible.
Click to expand...
Click to collapse
I believe when you accept the Verizon OTA update it locks down custom recoveries like CWM/TWRP and the only option is SafeStrap.
scrillakev said:
I believe when you accept the Verizon OTA update it locks down custom recoveries like CWM/TWRP and the only option is SafeStrap.
Click to expand...
Click to collapse
Ah ha. Thanks for the reply. So can I proceed with installing SafeStrap, or do I need to uninstall CWM first?
Leach0789 said:
Ah ha. Thanks for the reply. So can I proceed with installing SafeStrap, or do I need to uninstall CWM first?
Click to expand...
Click to collapse
Yea if your on a Verizon s4 running any build after MDK... which you are... SafeStrap is your only option.
Hard to say what that will do to your phone after trying to install CWM.... usually it just soft bricks it and you need to Odin back to stock...
Sent from my SCH-I545 using Tapatalk
Mistertac said:
Yea if your on a Verizon s4 running any build after MDK... which you are... SafeStrap is your only option.
Hard to say what that will do to your phone after trying to install CWM.... usually it just soft bricks it and you need to Odin back to stock...
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
I just started the process of installing SafeStrap, but maybe I will wait until I'm home from work, in case I need to Odin..
Leach0789 said:
I just started the process of installing SafeStrap, but maybe I will wait until I'm home from work, in case I need to Odin..
Click to expand...
Click to collapse
May be a good idea just in case. I've seen some on here do the same as you with ROM manager and once they rebooted they were brought to the unauthorized software detected screen.... And without a recovery and a backup already made you'd be out of luck.
Sent from my SCH-I545 using Tapatalk
Mistertac said:
May be a good idea just in case. I've seen some on here do the same as you with ROM manager and once they rebooted they were brought to the unauthorized software detected screen.... And without a recovery and a backup already made you'd be out of luck.
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
It would probably be smart to remove CWM with Odin before attempting SafeStrap, correct? Is there a specific thread for removing CWM from a Verizon S4? I searched around but couldn't find anything specific to the S4.
Edit: I found a guide on NasirTech. Looks like that will work.
Leach0789 said:
It would probably be smart to remove CWM with Odin before attempting SafeStrap, correct? Is there a specific thread for removing CWM from a Verizon S4? I searched around but couldn't find anything specific to the S4.
Edit: I found a guide on NasirTech. Looks like that will work.
Click to expand...
Click to collapse
Well it didn't actually install it since your kernel doesn't allow for it now but what I would do is just use Odin and start over. Can use a No Wipe file and keep all your stuff.
You could try the method you found... I'm just not familiar with it.
Hard to say really how it will act. Maybe you'll have no issues at all just be able to install SafeStrap. Maybe you'll be able to install it but then it won't boot properly into it... who knows. Both have happened to me with my recovery ( CWM ),.. and using Odin was the only thing that helped.
Good luck .. I'm sure you'll get it going
Sent from my SCH-I545 using Tapatalk
Mistertac said:
Well it didn't actually install it since your kernel doesn't allow for it now but what I would do is just use Odin and start over. Can use a No Wipe file and keep all your stuff.
You could try the method you found... I'm just not familiar with it.
Hard to say really how it will act. Maybe you'll have no issues at all just be able to install SafeStrap. Maybe you'll be able to install it but then it won't boot properly into it... who knows. Both have happened to me with my recovery ( CWM ),.. and using Odin was the only thing that helped.
Good luck .. I'm sure you'll get it going
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
Thanks! Would you mind helping me find a correct no-wipe file? I found a couple files, but since I'm a new user I can't post links here, so I can't ask anyone if its the correct file or not!
Leach0789 said:
Thanks! Would you mind helping me find a correct no-wipe file? I found a couple files, but since I'm a new user I can't post links here, so I can't ask anyone if its the correct file or not!
Click to expand...
Click to collapse
Here you go!
http://forum.xda-developers.com/showthread.php?t=2735172
Yup... Tulsa you're quick!! Lol
Grab the NC5 No Wipe...
Sent from my SCH-I545 using Tapatalk
Tulsadiver said:
Here you go!
http://forum.xda-developers.com/showthread.php?t=2735172
Click to expand...
Click to collapse
Thanks! You guys rock.