Hello All. Im very glad and thankful if you could help me solving my problem with my experia u not turning on and not even charging. I knew my battery was on 25% when the phone shuts down itself and never turn on again. Help me out of these anyone?
try charging battery from other phone or a portable battery charger...
then try getting it into flashmode... if the phone enters flashmode, flash stock ftf using flashtool.
complete guide : http://forum.xda-developers.com/showthread.php?t=1849170
and have patience, dont mess up or it might get hard bricked .
topzias said:
Hello All. Im very glad and thankful if you could help me solving my problem with my experia u not turning on and not even charging. I knew my battery was on 25% when the phone shuts down itself and never turn on again. Help me out of these anyone?
Click to expand...
Click to collapse
deshx said:
try charging battery from other phone or a portable battery charger...
then try getting it into flashmode... if the phone enters flashmode, flash stock ftf using flashtool.
complete guide : http://forum.xda-developers.com/showthread.php?t=1849170
and have patience, dont mess up or it might get hard bricked .
Click to expand...
Click to collapse
I hav charged already the battery with a universal charger and i know its fully charged but still the phone wont respond not even the vibrate or the light. Its like nothing happens.
well, the guide has all major recovery methods.
you can try this :
1. remove battery.
2. wait for ~1 min
3. connect battery. do not try to turn on the phone.
4. start flashtool, wait for it to start completely.
5. press volume up (for fastboot mode, preferred if bootloader unlocked ) or volume down (for flashmode) and connect the phone.
ans the following :
does the flashtool recognize anything ???
does led blink ? if yes, what color ? do you fell any vibrations ?
does SONY logo (anything else) displayed ?
does your PC detect any device connected ?
does the phone vibrate on hard/soft reset button combinations (as stated in guide)?
IF all the answers are NO, then you better get your phone checked for hardware issues.
lets hope its not a H/W issue or a hard brick.
and if possible, try to remember what caused this. how and when did this happen. may be that can help you recover your phone.
topzias said:
I hav charged already the battery with a universal charger and i know its fully charged but still the phone wont respond not even the vibrate or the light. Its like nothing happens.
Click to expand...
Click to collapse
deshx said:
well, the guide has all major recovery methods.
you can try this :
1. remove battery.
2. wait for ~1 min
3. connect battery. do not try to turn on the phone.
4. start flashtool, wait for it to start completely.
5. press volume up (for fastboot mode, preferred if bootloader unlocked ) or volume down (for flashmode) and connect the phone.
ans the following :
does the flashtool recognize anything ???
does led blink ? if yes, what color ? do you fell any vibrations ?
does SONY logo (anything else) displayed ?
does your PC detect any device connected ?
does the phone vibrate on hard/soft reset button combinations (as stated in guide)?
IF all the answers are NO, then you better get your phone checked for hardware issues.
lets hope its not a H/W issue or a hard brick.
and if possible, try to remember what caused this. how and when did this happen. may be that can help you recover your phone.
Click to expand...
Click to collapse
Tried the above steps but no luck.
does the flashtool recognize anything ??? No.
does led blink ? if yes, what color ? do you fell any vibrations ?No led blink and no vibrations.
does SONY logo (anything else) displayed ? No.
does your PC detect any device connected ? No.
does the phone vibrate on hard/soft reset button combinations (as stated in guide)? No.
IF all the answers are NO, then you better get your phone checked for hardware issues.
lets hope its not a H/W issue or a hard brick.
My wife is the one using this phone and it suddenly shutsdown while charging and never turn on again. thanks for ur help.
possibly a hardware issue, get your phone checked..
also try connecting battery in another phone, if you are very lucky,the battery might be dead, and you can buy new one, otherwise ... god knows.
topzias said:
Tried the above steps but no luck.
does the flashtool recognize anything ??? No.
does led blink ? if yes, what color ? do you fell any vibrations ?No led blink and no vibrations.
does SONY logo (anything else) displayed ? No.
does your PC detect any device connected ? No.
does the phone vibrate on hard/soft reset button combinations (as stated in guide)? No.
IF all the answers are NO, then you better get your phone checked for hardware issues.
lets hope its not a H/W issue or a hard brick.
My wife is the one using this phone and it suddenly shutsdown while charging and never turn on again. thanks for ur help.
Click to expand...
Click to collapse
deshx said:
possibly a hardware issue, get your phone checked..
also try connecting battery in another phone, if you are very lucky,the battery might be dead, and you can buy new one, otherwise ... god knows.
Click to expand...
Click to collapse
Problem is i cant test the battery bec. I dont hav other phone. I only chargedmit with a universal charger. I hope its not a hardware problem. Cross fingers..
Related
Hello comrades,
I have xperia x10 mini pro. I rooted phone with Flashtool and installed CWM. I tried to boot it in flash mode (turned off phone, back button held and plugged in USB into the phone), but what I get is that my phone turned on always, like that I pressed Power button.
Earlier I couldn't boot it into the flash mode and I got that I charging battery, but after I installed CWM, phone always turns on.
Due to, I can't re-flash it because it always turns on. I tried with flashtool, PC companion, SEUS but all software need that I turn off phone and then hold back button and plug in usb and what I get is turned on phone. Please help me how to fix this problem.
I would like to re-flash it to stock 2.1.1.A.0.6 (2.1-update1).
Phone turns on even if I just plug in usb to phone (one end is in the PC and when I plug in other end into the phone, phone turns on). What is wrong guys?
bokivaol said:
Phone turns on even if I just plug in usb to phone (one end is in the PC and when I plug in other end into the phone, phone turns on). What is wrong guys?
Click to expand...
Click to collapse
Happened to me b4 if u want to repair with pc comp just remove the battery till u reach connection step then quickly connect battery and cable (nvm the cover) and hold back button when connecting if u do fast enough will work
sent from my u20i xperia x10 mini pro running mini cm9 3.0.2 on nAa ics 3
THX nAa. VERY MUCH!!!
Leave your phone plugged in and press POWER-HOME and BACK all together, as soon as the screen turns completelly black (backlight off too) releast POWER and HOME, and leave the back-button pressed, that will probably work too.
LukBoy99 said:
if u want to repair with pc comp just remove the battery till u reach connection step then quickly connect battery and cable (nvm the cover) and hold back button when connecting if u do fast enough will work
Click to expand...
Click to collapse
Can you explain me a little more detailed, i didn't get you very well. I am noob
How do you mean until I reach connection step, where should I reach connection step?
You take out the battery, then you go into PC Companion and follow the steps to repair your phone, until it asks to connect your phone in flash-mode.
Then do as he said (put the battery in etc.)
SmG67 said:
You take out the battery, then you go into PC Companion and follow the steps to repair your phone, until it asks to connect your phone in flash-mode.
Then do as he said (put the battery in etc.)
Click to expand...
Click to collapse
It doesn't work.
I tried and POWER-BACK-HOME buttons while the phone is plugged in (turned off and turned on), same sh..t. Phone starts like that I powered it on
stitypta had
What do you think, what will happened if I wipe it using CWM? Can I brick it on that way?
If you mean formatting your phone, so you don't have a system on there anymore... that probably will give you a brick. Flashmode is a hardware feature, implemented to install firmware and enable reparations to your phone's software.
Deleting everything you can will not magically solve your problem, as far as i know.
It might help if you get mad at the phone and abuse the back-button by repeatedly pressing it when connecting the phone.
SmG67 said:
If you mean formatting your phone, so you don't have a system on there anymore... that probably will give you a brick. Flashmode is a hardware feature, implemented to install firmware and enable reparations to your phone's software.
Deleting everything you can will not magically solve your problem, as far as i know.
It might help if you get mad at the phone and abuse the back-button by repeatedly pressing it when connecting the phone.
Click to expand...
Click to collapse
Does this mean that I have hardware problem. Phone works without any problem.
Somehow it doesn't detect you pressing the back-button, maybe there is some dust or dirt inbetween the contacts or something, since you flashed sucessfully before i don't think it's a serious hardware-problem.
SmG67 said:
Somehow it doesn't detect you pressing the back-button, maybe there is some dust or dirt inbetween the contacts or something, since you flashed sucessfully before i don't think it's a serious hardware-problem.
Click to expand...
Click to collapse
I didn't flashed it before, I couldn't do that. I couldn't unlock bootloader, because I couldn't boot it in flash mode (phone just show that battery charging), after installing CWM now phone even don't show that battery is charging (it turns on when I plug in USB in the phone without holding any button). This is nightmare!
You are still on the original firmware then?
I mean, your phone still works?
SmG67 said:
You are still on the original firmware then?
I mean, your phone still works?
Click to expand...
Click to collapse
Yes, I am on original firmware and phone still works, but I have problem to boot it in flash mode. When I plug in USB cable in the phone it turns on, like that I pressed POWER button. I don't press any button, but when I plug in usb cable 10-20 seconds and phone is on.
Yes, because your phone detects the usb-cable getting plugged in, even when it's off, it thinks you want to charge it, so (normally) it loads the kernel in order to start the charging-process, that is normal behaviour. I have been on a kernel that didn't support that feature, and it booted into the full rom before it started charging.
In short: the usb-port also functions as a power-button, sort off
Does the back-button work normally when you're on the firmware? (Like, open the app-drawer, pressing back-button should close it?)
SmG67 said:
Does the back-button work normally when you're on the firmware? (Like, open the app-drawer, pressing back-button should close it?)
Click to expand...
Click to collapse
Yes, the back button works perfect, closing apps (not close apps, but back to the phones "desktop"), back to previous pages in browser...
I am concerned because, before I installed CWM , when it was OFF and plugged in on USB, phone just showed black screen and when I clicked on some button I could see that battery is charging, that was all. Now, when I plug in USB it turns on like I pressed POWER button.
And off course never booted in flash mode because it turns on
SmG67 said:
Does the back-button work normally when you're on the firmware? (Like, open the app-drawer, pressing back-button should close it?)
Click to expand...
Click to collapse
What is app-drawer, I don't know what is that.
oh, that's the bit where you find all your installed apps, the grid you see when you press on the little triangle on the bottom of your desktop, or swipe up on the desktop.
I honestly don't know why your phone won't go into flash-mode though. Maybe try to take out your battery for about 10 minutes so your phone gets rid of all charge and static, and then try again.
SmG67 said:
I honestly don't know why your phone won't go into flash-mode though. Maybe try to take out your battery for about 10 minutes so your phone gets rid of all charge and static, and then try again.
Click to expand...
Click to collapse
I solved problem about POWER-ing on when I plug in USB. I installed new ROM "MiniCM7Pro_V21_Paul_XXX" via CWM because I didn't need to boot it in flash mode and now when I plug in USB I got that it charging battery and orange led diode.
But I can't boot it in flash mode even with new ROM, all the time orange led diode when I hold back button and plug in USB. I wiped out all date except something about "battery" from Advanced CWM options.
bokivaol said:
Hello comrades,
I have xperia x10 mini pro. I rooted phone with Flashtool and installed CWM. I tried to boot it in flash mode (turned off phone, back button held and plugged in USB into the phone), but what I get is that my phone turned on always, like that I pressed Power button.
Earlier I couldn't boot it into the flash mode and I got that I charging battery, but after I installed CWM, phone always turns on.
Due to, I can't re-flash it because it always turns on. I tried with flashtool, PC companion, SEUS but all software need that I turn off phone and then hold back button and plug in usb and what I get is turned on phone. Please help me how to fix this problem.
I would like to re-flash it to stock 2.1.1.A.0.6 (2.1-update1).
Click to expand...
Click to collapse
i dont have time to read if this was resolved but you need to leave your phone of for about 2 min the little bugger holds a charge for quit a bit you got one of the newer ones like mine i got this info from sony website at least 30sec power off before attempting to do the above steps also i do know how to get the phone out of this refer to the this thread http://forum.xda-developers.com/showthread.php?t=1635286&page=2 i only know this cause iam you !! lol as soon as i find a stock rom boom i am
http://minus.com/lbg0XZRW728Kwu ling for stock rom bro
follow step for step with the referance link above to reflash stock rom thanks that dude that told me
and it works cause i rebricked it lol i reflashed the same rom that did this to my phone and so far all above steps in referance link seem to be working"
http://forum.xda-developers.com/showthread.php?t=1636504 follow to the t you hav i.c.s 4.0 i guess works like a charm ! between both guides 25 min !!! yesterday i put 7hrs !! enjoy bro and thank thank the guys that root me they are the true credit iam just passing the info on too you that i got from both guides. look at my post and you will see i had this problem follow these steps and you will be fine remeber firs boot is the longest
best thing that ever happened to me was i bricked my my xperia mini pro u20 haha got ics out it lol
OK, my friend gave me this phone because he couldnt repair it. The problem is the phone wont start up, when I plug the charger it shows the sony ericsson logo and the battery level for 1 second (the battery percentage is 0%) and it stucks in a bootloop untill disconnect the device from the charger. I havent tried flashing it with PC Companion or Flashtool because the batterylevel is 0. Also I cant find the battery in this phone. Should I flash the phone and charge it ? Thanks in advance. Just tried to identify with Flashtool it doesnt give any info, even the windows wont detect the phone
DavidMKD said:
OK, my friend gave me this phone because he couldnt repair it. The problem is the phone wont start up, when I plug the charger it shows the sony ericsson logo and the battery level for 1 second (the battery percentage is 0%) and it stucks in a bootloop untill disconnect the device from the charger. I havent tried flashing it with PC Companion or Flashtool because the batterylevel is 0. Also I cant find the battery in this phone. Should I flash the phone and charge it ? Thanks in advance. Just tried to identify with Flashtool it doesnt give any info, even the windows wont detect the phone
Click to expand...
Click to collapse
When it shows the battery level you can push the power button to let it boot into the ROM. You could try that, but i think the battery is well en truly dead by the sound of it. It is possible to replace it and there is a tutorial in the Accessories section of this forum, but it isn't for the fainthearted.
It's the one design decision SE made with the x10mini that is a royal pain in the you know what... with the x10mini pro you can just pull it out like you would do with any other phone, but in the x10mini it's encapsulated completely which makes it difficult.
It hardly shows the battery level for one second, when I push the power button there it vibrates for a second and it goes as it was, stuck in bootloop.
DavidMKD said:
It hardly shows the battery level for one second, when I push the power button there it vibrates for a second and it goes as it was, stuck in bootloop.
Click to expand...
Click to collapse
No harm in flashing it with SEUS or PC Companion then It's not going to make it any worse... But i still think your major problem is the battery.
Nope, Flashtool, Omnius and PC Companion wont detect the phone. As I said the phone the windows itself is not detecting the device
DavidMKD said:
Nope, Flashtool, Omnius and PC Companion wont detect the phone. As I said the phone the windows itself is not detecting the device
Click to expand...
Click to collapse
You can repair it with PC Companion, it doesn't need to recognise the phone, it just needs flashmode which you can reach by pressing the back-button before inserting the usb-cable.
Ask PC Companion for an update without the phone connected and it will give you a repair option. Follow the instructions from there.
Nope, no sign of life.The phone wont enter flash mode.
DavidMKD said:
Nope, no sign of life.The phone wont enter flash mode.
Click to expand...
Click to collapse
When it asks for flashmode, plug in the usb-cable, press home (middle) and power buttons together to create a hard reboot.. as soon as the screen is completely black, press the back-button.
Still the same thing. I even tried to enter flash mode while I am charging the phone, the same result. The phone only has life while its on charger otherwise its dead. Cant power on, any program cant detect the phone. Will try to make video to explain visually
Here is the video:
http://www.youtube.com/watch?v=q_F45nQzekU&feature=youtu.be
DavidMKD said:
Here is the video:
http://www.youtube.com/watch?v=q_F45nQzekU&feature=youtu.be
Click to expand...
Click to collapse
I see... but flashmode occurs before the kernel is starting to load, so it should be available to you...
Well its not. I even tried on different PC. I have Flashtool, Omnius, SUS, PC Companion etc so I have all drivers I need
Dude! Just charge the battery to full level by using other mimmi or use universal battery charger...I also faced the same problem...and got out of it easily...just charge battery and then ur done....
HIT THANKS IF YOU FOUND ME HELPFUL!!
Sent from my U20i using XDA
Hello guys.This is my problem with Xperia P.I tried to update CWM from 6.0.1.2 to 6.0.3.0 in hope that I will get rid of that status error 7 when trying to install CM 11.Ok so what I did:i downloaded an update for CWM in zip format,i transferred the zip files to my xperia p internal storage then disconnected the phone from pc,then I booted the phone In CWM and from there I tried to update CWM by selectin install from zip sd card the zip archive.It said It was succesfull then asked for reboot and that was.After that the phone gone dead,no response from it even when I tried to power it on or to reset it by key combinations nothing worked.Even when I plugged it on charger nothing or in my pc usb.So when this happened my phone was rooted/unlocked bootloader and running latest JB build 6.1.2.A.100.So what I tried so far:i plugged it in wall charger for 6+ hours in hope I will get a life sign from it and nothing.Then I tried to disconnect its battery,i know its non removable but it has a cord attached that can be detached and I did it for about 5 mins.After that I reconnect the battery and plugged it in.Well I got a solid red led on it and I thought oh well it seems it worked but after exactly 15mins the red led goes out and nothing happens after it.At the moment I am writing this the phone already is dead by 24 hrs+.And yea I tried to connect it in flash mode for flashtool but not a sign at all.My pc doesn't detects it.So is there any hope left for my phone?If so please give more solutions.Oh and another thing it seems that after the red light goes off after 15 mins and I unplug it from charger and reconnect it the red led comes again and the process can be repeated.So should I try this way to charge it until it has enough power to do some responses?
DeusEx211 said:
Hello guys.This is my problem with Xperia P.I tried to update CWM from 6.0.1.2 to 6.0.3.0 in hope that I will get rid of that status error 7 when trying to install CM 11.Ok so what I did:i downloaded an update for CWM in zip format,i transferred the zip files to my xperia p internal storage then disconnected the phone from pc,then I booted the phone In CWM and from there I tried to update CWM by selectin install from zip sd card the zip archive.It said It was succesfull then asked for reboot and that was.After that the phone gone dead,no response from it even when I tried to power it on or to reset it by key combinations nothing worked.Even when I plugged it on charger nothing or in my pc usb.So when this happened my phone was rooted/unlocked bootloader and running latest JB build 6.1.2.A.100.So what I tried so far:i plugged it in wall charger for 6+ hours in hope I will get a life sign from it and nothing.Then I tried to disconnect its battery,i know its non removable but it has a cord attached that can be detached and I did it for about 5 mins.After that I reconnect the battery and plugged it in.Well I got a solid red led on it and I thought oh well it seems it worked but after exactly 15mins the red led goes out and nothing happens after it.At the moment I am writing this the phone already is dead by 24 hrs+.And yea I tried to connect it in flash mode for flashtool but not a sign at all.My pc doesn't detects it.So is there any hope left for my phone?If so please give more solutions.Oh and another thing it seems that after the red light goes off after 15 mins and I unplug it from charger and reconnect it the red led comes again and the process can be repeated.So should I try this way to charge it until it has enough power to do some responses?
Click to expand...
Click to collapse
Following link is a complete guide on how to repair a bricked phone. I hope it offers a solution for your problem too.
Beverke said:
Following link is a complte guide on how to repair a bricked phone. I hope it offers asolution for your problem too.
Click to expand...
Click to collapse
Well I hope that I can recover my phone.
DeusEx211 said:
Well I hope that I can recover my phone.
Click to expand...
Click to collapse
if ur bootloader wasn't unlocked use SUS or sony pc suite to recover ur pc .... nd correct title , this isnt hard brick , i think u flashed a kernel from a different device ... if bootloader was unlocked then flash stock ftf using flashtool.. and flashtool works only in windows 7 and below ... making it work in windows 8 is tedious turn off ur phone and then hold volume down button then connect usb cable if green led lights ,that is flashmode
suyash691 said:
if ur bootloader wasn't unlocked use SUS or sony pc suite to recover ur pc .... nd correct title , this isnt hard brick , i think u flashed a kernel from a different device ... if bootloader was unlocked then flash stock ftf using flashtool.. and flashtool works only in windows 7 and below ... making it work in windows 8 is tedious turn off ur phone and then hold volume down button then connect usb cable if green led lights ,that is flashmode
Click to expand...
Click to collapse
I am running Windows 7 and the bootloader is unlocked.Also I cant use flashtool or any software from pc because the phone it doesn't get detected.But if I plugged it on pc USB it does give a red light for exactly 14 mins then the red led goes off.Also any key pressing or key combinations doesn't help as I don't get any response from phone.So I am really sure its hard brick.Only sign from it is the red led that goes off after 14 mins.
So anymore ideas?Does my phone was hard resetted after I detached the battery for 5 mins and then reattached it?Because before this I didn't got the red led.And also should I try to recharge my phone by pluggin in it in charger wait 14 mins till red led gets off then repeat this process?
DeusEx211 said:
I am running Windows 7 and the bootloader is unlocked.Also I cant use flashtool or any software from pc because the phone it doesn't get detected.But if I plugged it on pc USB it does give a red light for exactly 14 mins then the red led goes off.Also any key pressing or key combinations doesn't help as I don't get any response from phone.So I am really sure its hard brick.Only sign from it is the red led that goes off after 14 mins.
So anymore ideas?Does my phone was hard resetted after I detached the battery for 5 mins and then reattached it?Because before this I didn't got the red led.And also should I try to recharge my phone by pluggin in it in charger wait 14 mins till red led gets off then repeat this process?
Click to expand...
Click to collapse
see u turn off phone .... then hold volume down and then plug usb , green led should light up... thats flashmode ... if flashmode come then phone repairable using flashtool with proper drivers. u flashed wrong krnel it seems
suyash691 said:
see u turn off phone .... then hold volume down and then plug usb , green led should light up... thats flashmode ... if flashmode come then phone repairable using flashtool with proper drivers
Click to expand...
Click to collapse
And how I am supposed to turn phone off when I get no sign from it when I am pressing volume or power keys.The only sign I get is the red led that after 14 mins goes off.Yea I flashed/updated a wrong CWM for my phone.And how that could screw my phone that bad I don't have any idea.
Just remove the battery chord from the battery (not the charger chord). This means, your phone is in turn off mode. Then reconnect it. Then try those flashmode combinations.
And for any further status 7 issues refer to my guide. Link is in my signature
Sent from my Nexus 5 using xda app-developers app
when red led isnt lit up and ur phone isnt connected to either charger or pc then it means its off ..... then hold only volume down button (u won't get any response right now) then attach usb cable while holding volume down ... green led will definitely light up and then flash stock ftf
Siddharth121 said:
Just remove the battery chord from the battery (not the charger chord). This means, your phone is in turn off mode. Then reconnect it. Then try those flashmode combinations.
And for any further status 7 issues refer to my guide. Link is in my signature
Sent from my Nexus 5 using xda app-developers app
Click to expand...
Click to collapse
Well I removed the bat cord couple of times then reconnect it and tried flasmode comb but the pc still doesn't detects my phone.Only red led I get that goes off after 14 mins.
Bro, then this may be a hard brick. Try some hardbrick procedures. Or take your device to some local shops. They have a flashing device, which flashes stock firmware. Service centres will cost u very much.
Sent from my Nexus 5 using xda app-developers app
Siddharth121 said:
Bro, then this may be a hard brick. Try some hardbrick procedures. Or take your device to some local shops. They have a flashing device, which flashes stock firmware. Service centres will cost u very much.
Sent from my Nexus 5 using xda app-developers app
Click to expand...
Click to collapse
And what are the hardbrick procedures?
Siddharth121 said:
Bro, then this may be a hard brick. Try some hardbrick procedures. Or take your device to some local shops. They have a flashing device, which flashes stock firmware. Service centres will cost u very much.
Sent from my Nexus 5 using xda app-developers app
Click to expand...
Click to collapse
its not hard brick ... in hard brick you don't even get to see the red led ..... this is a basic soft brick because he flashed incompatible kernel which failed bootloader test and hence he is getting this red led .... hard brick = phone becomes paperweight with no led or anything working ....... even charging which does in his case ....... he is just unable to turn on flashmode , (typical case with new users), even i also flashed wrong kernel on my xgo (u cannot even remove battery in that) , i just waited for red led to shut down then holding volume down and then plugging in usb i was able to get flashmode
suyash691 said:
its not hard brick ... in hard brick you don't even get to see the red led ..... this is a basic soft brick because he flashed incompatible kernel which failed bootloader test and hence he is getting this red led .... hard brick = phone becomes paperweight with no led or anything working ....... even charging which does in his case ....... he is just unable to turn on flashmode , (typical case with new users), even i also flashed wrong kernel on my xgo (u cannot even remove battery in that) , i just waited for red led to shut down then holding volume down and then plugging in usb i was able to get flashmode
Click to expand...
Click to collapse
Please elaborate how I can get in flasmode if my pc doesn't detects the phone when I am pluggin in it USB with the down volume pressed.I have all fastboot/flashtool drivers installed latest versions.Anymore solutions?I did managed to get in flash mode before when I updated my phone from 6.2.A.0.400 to 6.2.A.1.100 through flashtool.
DeusEx211 said:
Please elaborate how I can get in flasmode if my pc doesn't detects the phone when I am pluggin in it USB with the down volume pressed.I have all fastboot/flashtool drivers installed latest versions.Anymore solutions?I did managed to get in flash mode before when I updated my phone from 6.2.A.0.400 to 6.2.A.1.100 through flashtool.
Click to expand...
Click to collapse
first remove battery cable for 3-5 mins then reconnect it ...... don't touch the power button ... hold the volume button down.. while holding it down insert usb cable .... (give it 2-6 seconds and DONT LEAVE THE VOLUME DOWN BUTTON )the led should now turn on and glow green (flashmode enabled , u shud know the rest i think) don't check if pc detecting or not just check LED green or not first
suyash691 said:
first remove battery cable for 3-5 mins then reconnect it ...... don't touch the power button ... hold the volume button down.. while holding it down insert usb cable .... (give it 2-6 seconds and DONT LEAVE THE VOLUME DOWN BUTTON )the led should now turn on and glow green (flashmode enabled , u shud know the rest i think) don't check if pc detecting or not just check LED green or not first
Click to expand...
Click to collapse
I followed your instructions to the letter even I tried it twice to be sure I did followed it them right.Only red led appears.It seems the phone wont accept any commands given.Ok next solution.
DeusEx211 said:
I followed your instructions to the letter even I tried it twice to be sure I did followed it them right.Only red led appears.It seems the phone wont accept any commands given.Ok next solution.
Click to expand...
Click to collapse
Go to sony center and say that you just turned on the phone after a while and it was like this (and keep ur fingers crossed ) .... Seriously this sometimes works
suyash691 said:
Go to sony center and say that you just turned on the phone after a while and it was like this (and keep ur fingers crossed ) .... Seriously this sometimes works
Click to expand...
Click to collapse
I don't have anymore warranty left.So I think they will charge me for this.Maybe if I will let the phone more time in charger or with the bat cord detached/unplugged from charger/pc and after that trying again?
DeusEx211 said:
I don't have anymore warranty left.So I think they will charge me for this.Maybe if I will let the phone more time in charger or with the bat cord detached/unplugged from charger/pc and after that trying again?
Click to expand...
Click to collapse
if you can try using those "butterfly chargers" , the ones which directly charge battery..... then try this approach cuz flashmode needs 30% battery minimum to run , 75% is recommended
suyash691 said:
if you can try using those "butterfly chargers" , the ones which directly charge battery..... then try this approach cuz flashmode needs 30% battery minimum to run , 75% is recommended
Click to expand...
Click to collapse
Can you elaborate what are that butterfly chargers?And were I can find something like this as the battery cord is different.
Hello to all!!!
I have a problem with my XPERIA P(not rooted or unlocked), it wont boot if the cable is on the phone(pc or wall charger) and doesent even charge. When tryong to boot it shows only the SONY logo, not even xperia(which comes right after sony).
Tried getting into flash mode or fastboot mode, but it is the same thing.
If i switch on my phone with no cable plugged it starts normally.
When this happened i had no battery at all. After searching the web i found a guide to open my phone and remove the battery connector. After removing it and plugging back again it started charging. Now it wont charge anymore that way.
EDIT: Mac wont recognize it anymore(mac bridge, flashtool, adb)
Does anyone have an idea?
Thanks!
A
Try flashing the phone with stock ftf file via flash tool , you can find plenty of how to videos for that on internet . Your phone will be fine I guess
Search "Your phone model " "version" "stock ftf" download and flash it
Hit thanks if helped
Kaushik124 said:
Try flashing the phone with stock ftf file via flash tool , you can find plenty of how to videos for that on internet . Your phone will be fine I guess
Search "Your phone model " "version" "stock ftf" download and flash it
Hit thanks if helped
Click to expand...
Click to collapse
The problem is my phone wont stay in flash mode. It shows up the green led just for a sec and then tries too boot up normaly(green led turns red and shows sony logo) then it shuts down again...
Same for fastboot mode (blue led for 1 sec then again red).
Any idea?
Thanx in advance
@aserreqi
The disconnection issue is driver related. Use windows 7/xp (friends computer) install flashtool and then install the driver pack located in it. Then flash stock ftf.
Before this charge your phone overnight.
Sent from my Xperia P using Tapatalk
@Hamza Murad
I tried with windows 7(sus, flashtool, pc companion) and osx (sony bridge for mac and flashtool) with no results.
I will try again with windows if can get to charge it any more, because now it is not giving any sign of life
Thanx
aserreqi said:
@Hamza Murad
I tried with windows 7(sus, flashtool, pc companion) and osx (sony bridge for mac and flashtool) with no results.
I will try again with windows if can get to charge it any more, because now it is not giving any sign of life
Thanx
Click to expand...
Click to collapse
I had similar kind of issue , phones doesnt stay in flash mode when it should but I managed to get into fastboot mode , IT DID STAY THERE for me and I flashed some other kernel to make it work for few mins as I only wanted flashmode to work which it did . Try charging your phone for 2 hours and grab any kernel which is said to be fine with your phone , either ways you only need flashmode to work. If fastboot is also disconecting even after you have charged your phone umm DRIVERS DRIVERS !
Make sure you have all the drivers installed I always use flashtool, nothing else to flash
Kaushik124 said:
I had similar kind of issue , phones doesnt stay in flash mode when it should but I managed to get into fastboot mode , IT DID STAY THERE for me and I flashed some other kernel to make it work for few mins as I only wanted flashmode to work which it did . Try charging your phone for 2 hours and grab any kernel which is said to be fine with your phone , either ways you only need flashmode to work. If fastboot is also disconecting even after you have charged your phone umm DRIVERS DRIVERS !
Make sure you have all the drivers installed I always use flashtool, nothing else to flash
Click to expand...
Click to collapse
I have charged my phone now for 3 hours. The only way i get to charge now is discharging the battery to 0. I have to put it on charge(wall charger) pull off the connector of the battery and then put it again on.
If the phone is a little charged and i turn it on it wont charge any more. No charger or pc works.
I tried again the procedure of getting into fastboot or flash mode, but still nothing happens.
Green or blue led for a sec then tries to boot again.
I forgot to mention that the phone works like normal when not in charge, it boots normally and everything works fine...
P.S. the drivers are installed. I installed them again and again.
Thanx for your help anyway!!
aserreqi said:
I have charged my phone now for 3 hours. The only way i get to charge now is discharging the battery to 0. I have to put it on charge(wall charger) pull off the connector of the battery and then put it again on.
If the phone is a little charged and i turn it on it wont charge any more. No charger or pc works.
I tried again the procedure of getting into fastboot or flash mode, but still nothing happens.
Green or blue led for a sec then tries to boot again.
I forgot to mention that the phone works like normal when not in charge, it boots normally and everything works fine...
P.S. the drivers are installed. I installed them again and again.
Thanx for your help anyway!!
Click to expand...
Click to collapse
Oh my god , I feel bad for you . Try everything you could . Our last resort is to go to a sony service centre , TRUST ME THEY ARE DUMB AS HELL so you are better off knowing about roms and all , but still go to them if you cannot do ANYTHING . Good luck ,btw I dint understand PHONE WORKS NORMAL WHEN NOT IN CHARGE ? how is that possible
Kaushik124 said:
Oh my god , I feel bad for you . Try everything you could . Our last resort is to go to a sony service centre , TRUST ME THEY ARE DUMB AS HELL so you are better off knowing about roms and all , but still go to them if you cannot do ANYTHING . Good luck ,btw I dint understand PHONE WORKS NORMAL WHEN NOT IN CHARGE ? how is that possible
Click to expand...
Click to collapse
Yep it boots up normaly, no bootloop...
aserreqi said:
I have charged my phone now for 3 hours. The only way i get to charge now is discharging the battery to 0. I have to put it on charge(wall charger) pull off the connector of the battery and then put it again on.
If the phone is a little charged and i turn it on it wont charge any more. No charger or pc works.
I tried again the procedure of getting into fastboot or flash mode, but still nothing happens.
Green or blue led for a sec then tries to boot again.
I forgot to mention that the phone works like normal when not in charge, it boots normally and everything works fine...
P.S. the drivers are installed. I installed them again and again.
Thanx for your help anyway!!
Click to expand...
Click to collapse
I hope u didnt fry your phone charging ic like i did on mine. Using fake charger and short hv burst suddenly turn my phone exactly like yours. I somehow managed to recover from it temporarily by shorting usb wire while charging it and eventually the phone die. Haha lol.
Sent from my Xperia P using XDA Premium 4 mobile app
I have same problem
i flashed wrong kernel,now it doesn't boot or even go to fastboot! (it doesn't stay in fastboot)
the driver or pc is ok,because im flashed this wrong kernel with this pc!
any help? :crying:
behtashbt said:
I have same problem
i flashed wrong kernel,now it doesn't boot or even go to fastboot! (it doesn't stay in fastboot)
the driver or pc is ok,because im flashed this wrong kernel with this pc!
any help? :crying:
Click to expand...
Click to collapse
This is not the same problem.
First try volume up + power for about 15 seconds untill you feel (1+) 3 vibrations to turn it off.
Then try flashmode.
ChikeD said:
This is not the same problem.
First try volume up + power for about 15 seconds untill you feel (1+) 3 vibrations to turn it off.
Then try flashmode.
Click to expand...
Click to collapse
it works,thanks
hi..i have a problem with my z2..it wont turn on..when plug into charger..the display turn on for a couple second without showing anything and then only led turn on..showing red..orange or green depends on battery i guest..i wanna try to flash it using flashtool...when i try to flash it..i get stuck at hold volume down button...it wont detect my phone..i cant enter flashmode..but..at the script..it said..devices connected with usb debugging off..driver was succesfully installed..so this is some question from me..hope you guys could help me to solve this..
1)what actually happened to my phone??
2)if i need to turn usb debugging on to flash my phone..how do i turn it on??..bcoz my phone wont turn on..
3)do you have another solution..beside flashtool??
thanks...
Hi,
You could give PC Companion a try or Sony's Emma.
@soka said:
Hi,
You could give PC Companion a try or Sony's Emma.
Click to expand...
Click to collapse
pc companion and emma also dont detect my z2..i cant connect it in flashmode..anyway thank..any other suggestion?
Download this
http://forum.xda-developers.com/showthread.php?t=2635830
install the drivers and try flashmode again.
Do you perhaps know if your bootloader is unlocked?
If so try to get into fastboot mode ( volume up ) and flash a custom kernel like androplus that has recovery.
Then flash a stock pre-rooted zip.
@soka said:
Download this
http://forum.xda-developers.com/showthread.php?t=2635830
install the drivers and try flashmode again.
Do you perhaps know if your bootloader is unlocked?
If so try to get into fastboot mode ( volume up ) and flash a custom kernel like androplus that has recovery.
Then flash a stock pre-rooted zip.
Click to expand...
Click to collapse
still cannot enter into flashmode....i heard the sound from windows that my phone is connect..but not in flashmode..and also cant enter any storage...when i check at device and printer..it just show android..instead xperia z2..and cant do anything with it...i never unlocked the bootloader before...thanks..any other way buddy?
Hi dude.
Try to press and hold power and volume up buttons together for a 10 seconds until your phone vibrate 3 times,maybe help.
Ofcourse,your battery must me charged even 10 %.
Allek84 said:
Hi dude.
Try to press and hold power and volume up buttons together for a 10 seconds until your phone vibrate 3 times,maybe help.
Ofcourse,your battery must me charged even 10 %.
Click to expand...
Click to collapse
already tried...didnt vibrate..also tried red small button near sim card slot..nothing happens too...the only thing that happen is what i mention on the question when connecting to charger...actually..i tried almost everything that i get from internet..but..maybe someone know something..other way..to get my phone back to life..so i asked here..just maybe there are solution...thanx anyway
If your screen turn on even for a second when you connect to the charger there must be a solution.
The bad thing should be if screen not responding at all and that would mean that motherboard is dead.
Послато са D6503 уз помоћ Тапатока
looks like you phone freezed.
Try to use hard reset button, because "Device Connected with USB Debugging off" means your phone is turned on.
Press and hold hard reset button (near SIM Slot, small red button) for a moment to 3 buzzes. Then leave this button. Try to turn on. If it won't boot, do the same procedure and your phone will be turned off. Connect your phone in flashmode, FlashTool should recognize it.
Hope it helps, got similar problem, it has fixed it
Bruce666 said:
looks like you phone freezed.
Try to use hard reset button, because "Device Connected with USB Debugging off" means your phone is turned on.
Press and hold hard reset button (near SIM Slot, small red button) for a moment to 3 buzzes. Then leave this button. Try to turn on. If it won't boot, do the same procedure and your phone will be turned off. Connect your phone in flashmode, FlashTool should recognize it.
Hope it helps, got similar problem, it has fixed it
Click to expand...
Click to collapse
didnt work buddy..doesnt get a single buzzes...yeah..because of the screen turned on for a couple when connected to charger or pc..and wnidows make a sound when coneected..it really does give me a false hope..haha
khafiful said:
didnt work buddy..doesnt get a single buzzes...yeah..because of the screen turned on for a couple when connected to charger or pc..and wnidows make a sound when coneected..it really does give me a false hope..haha
Click to expand...
Click to collapse
oooops... looks like a strange brick :crying: No idea send it to repair I don't see any other options