Okay, I'm new to this whole android forum things and if stuff like this needs to be in a certain section, so just correct me if I'm wrong.
~o~o~o~o
After some research and testing on my Huawei G610 device, none fixed my boot-loop problem, so I created this method(I found a post which told the one with the problem to go to the download mode and not to the recovery mode, I'm sorry I forgot his or her name, but credits to him/her.) The method works for G610-U20 since I tested it, I don't know for the other device but I'm sure that it will work. Good luck and try not to make a mistake on any of the steps below.
Fix for the boot-loop on Huawei G610
Step One : Download the specific ROM for your device.(You can download other ROMs, it just have to be compatible with your device.)
Link for ROMs (Huawei G610) : ht tp: //ww w.needr om.co m/category/huawei/se rial-g/g610/ (Remove the spaces, I'm new so
I can't post outside links. Sorry.)
Step Two : Transfer the dload folder to your SD Card, you can connect your SD Card through another android device that is not stuck on
boot-loop or use one of those Multi-card reader stuff.
Step Three : Insert back your SD Card to your phone. Go into download mode (Press Power button+Up Volume+Down Volume).
Step Four : Wait for a few minutes, your phone should now bypass AND fix your boot-loop problem. If this didn't
help, I'll try to find some way to fix the boot-loop problem with another method.
Well thanks guys for reading my first post and I hoped that it helped someone that is really in a pinch and needs to get his or her Huawei G610 fixed right away.
Step Three : Insert back your SD Card to your phone. Go into download mode (Press Power button+Up Volume+Down Volume).
I can't go to download mode it's not working! any idead?
help
Faiil whyyyyyyyyyyyy -.-
it``s failed bro ,pls say another way to fix bootloop
DigitalCrystal said:
Okay, I'm new to this whole android forum things and if stuff like this needs to be in a certain section, so just correct me if I'm wrong.
~o~o~o~o
After some research and testing on my Huawei G610 device, none fixed my boot-loop problem, so I created this method(I found a post which told the one with the problem to go to the download mode and not to the recovery mode, I'm sorry I forgot his or her name, but credits to him/her.) The method works for G610-U20 since I tested it, I don't know for the other device but I'm sure that it will work. Good luck and try not to make a mistake on any of the steps below.
Fix for the boot-loop on Huawei G610
Step One : Download the specific ROM for your device.(You can download other ROMs, it just have to be compatible with your device.)
Link for ROMs (Huawei G610) : ht tp: //ww w.needr om.co m/category/huawei/se rial-g/g610/ (Remove the spaces, I'm new so
I can't post outside links. Sorry.)
Step Two : Transfer the dload folder to your SD Card, you can connect your SD Card through another android device that is not stuck on
boot-loop or use one of those Multi-card reader stuff.
Step Three : Insert back your SD Card to your phone. Go into download mode (Press Power button+Up Volume+Down Volume).
Step Four : Wait for a few minutes, your phone should now bypass AND fix your boot-loop problem. If this didn't
help, I'll try to find some way to fix the boot-loop problem with another method.
Well thanks guys for reading my first post and I hoped that it helped someone that is really in a pinch and needs to get his or her Huawei G610 fixed right away.
Click to expand...
Click to collapse
Going Fastboot mode instead of Download mode
tuncaytas said:
Click to expand...
Click to collapse
Unable to go to download mode. Its going to Fastboot mode after pressing power + Volume down buttons. Any Help?
Hi guys, can u please help me, im having an enormous issue with the g610-u15. The issue is that the phone every 30 seconds reboots continuounsly. I have tried with a lot of ways like rooting and then formatting with cwm or using sp flash but every way that is possible to fix gets always f*cked by errors or just because the phone didnt do anything as a result of the format
fail please help
help
My phone doesn't see update.app file when I select the dload folder
Related
Hi there. I have this Android Phone from china called Dapeng i9800. Its a 6inch MTK 6575 using ICS 4.03. I wonder where can I find the original rom for this and if there is any tweaks for this phone. Sometimes sluggish when using it as it only has 512 ram.
Thanks in advance
i also have the same model! have you rooted this phone? i can't seem to find instructions on how to go about doing this. can you please point me the right way?
thanks
zaraki kenpachi said:
i also have the same model! have you rooted this phone? i can't seem to find instructions on how to go about doing this. can you please point me the right way?
thanks
Click to expand...
Click to collapse
I got the root from here
xxx.slatedroid.com/topic/33144-haipad-i9220-mtk6575-android-40/
1.Please download root file on
xxx.t-kstore.com/4.0root.rar
2.Go to*setting-developer options-click USB debugging
3.Connect the phone with computer,turn on usb device.
4.Click the file you download from the link TPSparkyRoot.bat*
5.Your phone will restart first time,after the phone start finish(until you see the unlock),click enter in the window of TPSparkyRoot.bat.
6.The phone will restart second time,still the same as first time we did.Then start third time,same as we did in last two*times.Click enter,then phone was rooted.
7.You will see two more app was installed in your phone,that mean root phone successfully.
thanks! that was very helpful information! i had some trouble getting windows to connect to my device. kept getting the error: device not found. i suppose it is because i didn't have the proper drivers for the device.
but it is surprisingly easier when done in linux. i just needed to mess around a little with the udev rules.
for the benefit of newbies like me, the instructions provided from that link provided by worldbreaker, i didn't completely follow them. you can choose to install your own superuser and root explorer apk here. in my case, i already installed the Superuser app from the play store even before the rooting process. i also installed Root Explorer separately from the rooting process as well. so no chinese apps for me
now what?
worldbreaker said:
I got the root from here
xxx.slatedroid.com/topic/33144-haipad-i9220-mtk6575-android-40/
1.Please download root file on
xxx.t-kstore.com/4.0root.rar
2.Go to*setting-developer options-click USB debugging
3.Connect the phone with computer,turn on usb device.
4.Click the file you download from the link TPSparkyRoot.bat*
5.Your phone will restart first time,after the phone start finish(until you see the unlock),click enter in the window of TPSparkyRoot.bat.
6.The phone will restart second time,still the same as first time we did.Then start third time,same as we did in last two*times.Click enter,then phone was rooted.
7.You will see two more app was installed in your phone,that mean root phone successfully.
Click to expand...
Click to collapse
anyone know how i can flash clockworkmod recovery on this phone? i can't seem to find any information about this.
Please give me a fresh link to this suggested link
worldbreaker said:
I got the root from here
xxx.slatedroid.com/topic/33144-haipad-i9220-mtk6575-android-40/
1.Please download root file on
xxx.t-kstore.com/4.0root.rar
2.Go to*setting-developer options-click USB debugging
3.Connect the phone with computer,turn on usb device.
4.Click the file you download from the link TPSparkyRoot.bat*
5.Your phone will restart first time,after the phone start finish(until you see the unlock),click enter in the window of TPSparkyRoot.bat.
6.The phone will restart second time,still the same as first time we did.Then start third time,same as we did in last two*times.Click enter,then phone was rooted.
7.You will see two more app was installed in your phone,that mean root phone successfully.
Click to expand...
Click to collapse
Hi everyone,
I'm trying to root my phone and this file xxx.t-kstore.com/4.0root.rar is no longer available. I hope that someone can plase give me a copy of it or at least let me know where to find it.
Thank you.
Dapeng i9800 firmware found but links dead! Nead russian help!
Hi, I'm from West-Germany and got into trubble:
First of all, I used A Dapeng I9800 for more than 2 years without any problems!
Then, I got my Winter-Blues and cleaned cache from recovery mode!
After that the device didn't boot, because it wanted a passwort to use the cache, which wasn't set. No prob so far!
The solution I found was, that I have to set back to factory default.
But I took off the battery while it was formatting.
Yes, shame on me, I wasn't patient(!) thats my fault!
Now, I've got two new problems:
Is the EMMC bricked?
My russian isn't good enough to enter this forum: china-iphone.ru
to ask these two guys:
BBV1962 http://forum.china-iphone.ru/member12688.html
and:
designed http://forum.china-iphone.ru/member201062.html
via PM, for a working link they posted for my device in their posts on this sides:
http://forum.china-iphone.ru/n9880-6-0-480x854-1-2ghz-android-4-0-3-2x3000-mah-t21999-120.html
http://forum.china-iphone.ru/n9880-6-0-480x854-1-2ghz-android-4-0-3-2x3000-mah-t21999-140.html.
The MTK6575-77 6" original firmware ROM below the posted picture is what I mean.
I hope, someone can get a link for me AND it is not worthless, because the EMMC is broken, as my own backup dosn't work.
Maybee you can get the info hww to flash back exactly, because I get an 4010 format error with the spflash tool.
Thanks a lot
Today i try to root a Mediapad 10 ,, i use the files than are sticky in the this section on mediapad ... now to do the D.O.S exe called Root : The MediaPad stuck in the logo dont enter in recovery via buttons, Don't enter to the android robot recover zip update,,,, And no nothing with the set.
I use the file : Auto_recovery_installer_for_huawei_mediapad ,,, but don't recognize the device,,, Please someone can gimme a little bit of help?
Best Regards !!
Amartt said:
Today i try to root a Mediapad 10 ,, i use the files than are sticky in the this section on mediapad ... now to do the D.O.S exe called Root : The MediaPad stuck in the logo dont enter in recovery via buttons, Don't enter to the android robot recover zip update,,,, And no nothing with the set.
I use the file : Auto_recovery_installer_for_huawei_mediapad ,,, but don't recognize the device,,, Please someone can gimme a little bit of help?
Best Regards !!
Click to expand...
Click to collapse
Reading and reading for long hours ,it seen than the only files that could bring back to the normality to my tablet are the next file:
Huawei_S10-201u_V100R001C233B001_Root_Repair_Downgrade.7z
But the link than store this files are from Russia is called 4PDA and this files are corrupts .Cause when try to unzip always show a error when a try to unzip . :crying:
Please need badly the files ... somebody have this files ???
Problem fixed.. i used this files and then make a upgrade . Auto_recovery_installer_for_huawei_mediapad.zip .:highfive:
help needed
I also need help regarding mediapad link 10. Mic volumes in my link is so low person on tne other side can hardly hear me, usally i use skype.
It is runing 4.1.2 is this normal or should i go for warranty claim can rooting and installing a newer rom can solve this porblem?
Hallo everyone.
I have just tried to follow this guide to install Google Play and so on: http://forum.xda-developers.com/showthread.php?t=2256075
Guide:
I'm here for help you, and yes I bought K900
Here is the international .inb file to flash.
Part One: How flash international version:
1. create SDFUSE folder in the / of sdcard.
2. insert inb file there
3. go to fastboot mode (Vol+ + Power) and choose sdfuseupdate
4. done.
you'll get official international 47 rom (ROW region). It has google apps, it has play store.
INB file is here:
https://mega.co.nz/#F!xNdywAJA!AFbE_HikuoFODLpoc1j7Yg
But right after the message saying SDCARD UPDATE COMPLETED (as i remember it), the phone wont start again. The three buttons on the front flashes and nothing else happens.
Any clues to what might be the problem?
I hope you can help me!
Best regard
Jonas Kristiansen
Question
Hi Jonas,
Sorry to hear that.
Did you totally brick your phone? Can you still go into recovery or Hboot?
Is your phone recognized by adb and fastboot?
If you tell me more, maybe I can help.
Denis
Jonas Kristiansen said:
Hallo everyone.
I have just tried to follow this guide to install Google Play and so on: http://forum.xda-developers.com/showthread.php?t=2256075
Guide:
I'm here for help you, and yes I bought K900
Here is the international .inb file to flash.
Part One: How flash international version:
1. create SDFUSE folder in the / of sdcard.
2. insert inb file there
3. go to fastboot mode (Vol+ + Power) and choose sdfuseupdate
4. done.
you'll get official international 47 rom (ROW region). It has google apps, it has play store.
INB file is here:
https://mega.co.nz/#F!xNdywAJA!AFbE_HikuoFODLpoc1j7Yg
But right after the message saying SDCARD UPDATE COMPLETED (as i remember it), the phone wont start again. The three buttons on the front flashes and nothing else happens.
Any clues to what might be the problem?
I hope you can help me!
Best regard
Jonas Kristiansen
Click to expand...
Click to collapse
Same problem
Hello
I have same problem, i brick my K900. I try to start it, but phone is really little ignorant, absolutly not response to all. Flash using xFSTK is without chance.
Yep, Recovery and DroidBoot is unavilable. Phone only one flash touch buttons and nothing more... :crying:
Can you help me? I thing, hard-brick is too hard to solve.
Sorry for my english...
Maybe it will be usefull:
Volume down, hold it, then power button, Testing Menu appear, Droidboot, Recovery, Clear cache, Clear data (factory reset), reboot.
how unbrick ur k900 device
Jonas Kristiansen said:
Hallo everyone.
I have just tried to follow this guide to install Google Play and so on: http://forum.xda-developers.com/showthread.php?t=2256075
Guide:
I'm here for help you, and yes I bought K900
Here is the international .inb file to flash.
Part One: How flash international version:
1. create SDFUSE folder in the / of sdcard.
2. insert inb file there
3. go to fastboot mode (Vol+ + Power) and choose sdfuseupdate
4. done.
you'll get official international 47 rom (ROW region). It has google apps, it has play store.
INB file is here:
https://mega.co.nz/#F!xNdywAJA!AFbE_HikuoFODLpoc1j7Yg
But right after the message saying SDCARD UPDATE COMPLETED (as i remember it), the phone wont start again. The three buttons on the front flashes and nothing else happens.
Any clues to what might be the problem?
I hope you can help me!
Best regard
Jonas Kristiansen
Click to expand...
Click to collapse
(my english is veryyyyyyyyyy bad)
dont worry . there is a simple method :
this method work for hardbrick and softbrick too.
first download a favorite Rom you want
u can choice ur Rom from this page : http://m.kaskus.co.id/post/5300581ffbca17d47b8b457c#post5300581ffbca17d47b8b457c
download and install manufacturing flash tool and intel android device usb driver
https://dl.dropboxusercontent.com/u/26833962/K900 Tools/ManufacturingFlashTool_Setup_6.0.2.exe
http://software.intel.com/en-us/android/articles/intel-usb-driver-for-android-devices
second Refer this : http://forum.xda-developers.com/show...postcount=3245
This method require computer with driver and software installed and USB cable for sure
( unzip ur rom and open xml file on ur rom with manufacturing flash tool softwre)
maybe this video can help you too :
https://www.youtube.com/watch?v=BhvA_T694kw
This method works on my hardbrick device succeesfully
tatu63 said:
(my english is veryyyyyyyyyy bad)
dont worry . there is a simple method :
this method work for hardbrick and softbrick too.
first download a favorite Rom you want
u can choice ur Rom from this page : http://m.kaskus.co.id/post/5300581ffbca17d47b8b457c#post5300581ffbca17d47b8b457c
download and install manufacturing flash tool and intel android device usb driver
https://dl.dropboxusercontent.com/u/26833962/K900 Tools/ManufacturingFlashTool_Setup_6.0.2.exe
http://software.intel.com/en-us/android/articles/intel-usb-driver-for-android-devices
second Refer this : http://forum.xda-developers.com/show...postcount=3245
This method require computer with driver and software installed and USB cable for sure
( unzip ur rom and open xml file on ur rom with manufacturing flash tool softwre)
maybe this video can help you too :
https://www.youtube.com/watch?v=BhvA_T694kw
This method works on my hardbrick device succeesfully
Click to expand...
Click to collapse
hi tatu63
Me too got my K900 bricked while updating Rom from MFT .
Its not starting anymore. Complete black screen no menu lights at all.
When i connect my phone to usb cable it shows this in MFT tool and hangs up
07/01/14 12:47:15.886 DEBUG : New Android device -> serial: MedfieldEC710F76 status: 0 port: 1
and
Unbrick Oppo R5
Since oppo forums support is minimal and a lot of Oppo R5/ R5s owners are facing difficulties flashing new rom and since Oppo is unbrickable here are a guide as posted to oppo forum members by the member Ricky.
I had clear instructions not to post this tool anywhere BUT THEY DON’T SUPPORT ANY DEVICE and I have to break my promise as they broke any kind of support.
This community (XDA) is to help all members
The tool works with windows 10 and not only with windows 7 as they mention in their instructions
Packages you have to download first
1- Firmware ColorOS https://www.partage-facile.com/LM6Y85FF7Z/r8106ex_11_a.16_150806.tar.bz2.html
File Name: R8106EX_11_A.16_150806.tar.bz2
Size: 1.4GB
MD5: F85ED63BA637B559976D9BFF0AED0187
2- Instructions:
https://drive.google.com/file/d/0B3AWkNVCRSNVZGNRUE1rQW5YOFk/view?sid=
3- Driver : http://en.oppo.com/downloads/firmware/driverForFind5.rar
Mirror for driver http://www109.zippyshare.com/v/MEMiPlOv/file.html
Attention
a-Unbrick tool will wipe all data on your device including photos and music etc, if do you want to reserve your data please make o back up on your PC
b- After unbrick the first time power up take around 5-15 minutes
c- The most important things are to install the driver. For windows 10 you must enable unsigned signature verification through windows advanced settings (google it) prior driver installation.
d- In order to shut phone completely hold the power button for 8 -10 secs
How to use the tool
I tried to use the tool and the files you provided to revive my Oppo R5, but the layout of the tool which you provided is different from the one in the picture (you gave in the links). It is also in foreign characters so difficult to choose with option to tick.
In fact, the version that came with you package does not have as many option as the one in the picture. My confusion actually starts from when the program starts. There is a drop down menu to chose from a long list of 14005 to 15065. Which one do I choose for Oppo R5?
As for the qualcomm port, the device manager identified my phone on port 9006, whereas the picture shows 9008.
Please help me. I really need to get this phone to work. The phone would not do any thing is the buttons are pressed individually or in combination, other than being detected by the computer and enumerated in the device manager.
Many thanks in advance for your help.
amadoro said:
I tried to use the tool and the files you provided to revive my Oppo R5, but the layout of the tool which you provided is different from the one in the picture (you gave in the links). It is also in foreign characters so difficult to choose with option to tick.
In fact, the version that came with you package does not have as many option as the one in the picture. My confusion actually starts from when the program starts. There is a drop down menu to chose from a long list of 14005 to 15065. Which one do I choose for Oppo R5?
As for the qualcomm port, the device manager identified my phone on port 9006, whereas the picture shows 9008.
Please help me. I really need to get this phone to work. The phone would not do any thing is the buttons are pressed individually or in combination, other than being detected by the computer and enumerated in the device manager.
Many thanks in advance for your help.
Click to expand...
Click to collapse
For R5 use 14016.
mermigas said:
For R5 use 14016.
Click to expand...
Click to collapse
Thank you for your reply. I tried to use the tool again, but there is not option for 14016. The full list is here: 14005, 14006, 14023, 14037, 14039, 14040, 14041, 14042, 14043, 14045, 14046, 14047, 14050, 14051, 14052, 14061, 14062, 14065, 14068, 140083, 14085, 14097, 14098, 15005, 15005_4G, 15006, 1500_4G, 15007, 15007_4G, 15011, 15012, 15013, 15018, 15057, 15061, 15065.
The flash tool that I am using is V1.5. Is is possible that I am using a wrong version for what I need to do?
Many thanks for your attention.
amadoro said:
Thank you for your reply. I tried to use the tool again, but there is not option for 14016. The full list is here: 14005, 14006, 14023, 14037, 14039, 14040, 14041, 14042, 14043, 14045, 14046, 14047, 14050, 14051, 14052, 14061, 14062, 14065, 14068, 140083, 14085, 14097, 14098, 15005, 15005_4G, 15006, 1500_4G, 15007, 15007_4G, 15011, 15012, 15013, 15018, 15057, 15061, 15065.
The flash tool that I am using is V1.5. Is is possible that I am using a wrong version for what I need to do?
Many thanks for your attention.
Click to expand...
Click to collapse
Sorry mistyped
14061
Also there is an English Version for the flashing tool here
https://forum.xda-developers.com/r7-plus/help/oppo-r7plusm-msm-tool-t3313759.
Just download it and copy to the folder that there is the Chinese tool
For me the Chinese version works fine
Also there is a same guide here
http://community.oppo.com/en/forum.php?mod=viewthread&tid=51497&extra=
mermigas said:
Sorry mistyped
14061
Also there is an English Version for the flashing tool here
https://forum.xda-developers.com/r7-plus/help/oppo-r7plusm-msm-tool-t3313759.
Just download it and copy to the folder that there is the Chinese tool
For me the Chinese version works fine
Also there is a same guide here
http://community.oppo.com/en/forum.php?mod=viewthread&tid=51497&extra=
Click to expand...
Click to collapse
Thank you so much. it worked. Not my Oppo r5 is back alive.
Where is the download?
Is it normal that when I hit the download link there appear aliexpress??
I thought I had bricked my R5 but while trying to follow this guide it wasn't showing up in the "Ports" section of the Device Manager. I found that my phone still had fastboot, so I used it to install latest TWRP and then the repair rom. And now my phone is finally back to working condition! I hadn't modified in any way my phone and one day it got stuck at the logo. Anyway, thanks for the guide Mermigas!
anyone mirror pls
mega
[email protected] said:
anyone mirror pls
Click to expand...
Click to collapse
[dead link]
If it asks for a key leave it blank
Kushracer said:
https://mega.nz/#F!q8YFEJyB
If it asks for a key leave it blank
Click to expand...
Click to collapse
No asking for decryption key
mirror
Uploading here: R5S Unbrick Tools
Please help
After i have done all those instructions: my phone was completely dead(no more display and can't use any buttons).
Please what should i do for revive that.
Link Broken
cpuld you re-load the link of Color Os firmware please?
Its not valid now =(
Number for R5S?
Hi, I tried the 14061 for my OPPO R5S. Unfortunately it did not work. Now the phone is not starting.. help? Should I use another number?
Hi good people, this is my first post since I don't know where else to go.
My phone Vivo V7+ received an OTA update, so I downloaded and installed the updates, but after updating my phone now can't detect SIM card, I tried many different good SIM but still can't be detected.
I tried factory reset but failed, can't revert back to old firmware.
So I spent many hours of researching and watching YouTube tutorials and I tried to flash stockrom via QFIL. First I encountered problem going into EDL mode (which I spent hours of researching too) but solved it by shorting pinout at the back of the phone.
My laptops detect my phone qualcomm 9008 COM3, downloaded two V7+ stock rom and when I tried to flash via QFIL it will always give "Sahara Fail".
Some methods I tried;
1. Putting firmware at bin folder
2. Renaming folder into shorter name
3. Click download fast as soon as phone gets into EDL mode
4. Tried unlocking bootloader via adb but failed
5. Turn on airplane mode in laptops
Hopefully someone can help , thanks.
Anyone? Help? Now i lost my IMEI and i don't know what is the original number
While probably flashing wrong files you wiped baseband data .
To fix your imei you will need this QCN file which you can download from here:
https://mega.nz/#!YZx3hLgJ!RAj-f8X9de_vtQa1xlhRMN-oWw_YEuPwAs9UuwaT0CA
Decrypting key : !RAj-f8X9de_vtQa1xlhRMN-oWw_YEuPwAs9UuwaT0CA
Password: [email protected]
Credits: https://ufixers.com/u/hariichha
Download this tool and replace your Original imei : ( original imei you will find on your original box)
https://download2267.mediafire.com/bc4ykbffhlxg/euosvxp285tr473/QualcommIMEIRebuilder.rar
Example how to use:
https://www.youtube.com/watch?v=GFB0lrzFHtY
Good luck
Thanks @Teddy Lo for replying. All I did was followed the steps how to flash stock rom and I did downloaded the rom of the same model. But the steps that are floating around are not in great detail. And many YouTube tutorials are not in English almost 99% are in Hindi.
After my attempt of flashing I lost my IMEI and I don't have the box anymore (threw them away long time ago, lesson learned).
I guess I need to visit the nearest Vivo service centre for repair.
Thanks again for replying and providing necessary links.
Hi , why you give up so easy ?
1. Download this firmware :
https://www.mediafire.com/file/1f5r...xx.0_msm8953_split_Repairmymobile.in.rar/file
Once you downloaded extract to Desktop ...
2. Now , Run Qfil tool with Administrator and insert each files to right places .
See image bellow
https://ibb.co/09Fb9k5
Select just the way I marked it in the picture!
Let me know if you fixed or not ...
Wow thanks @Teddy Lo for replying.
Why am I giving up? Maybe because I scouted forums and YouTubes for hours and day, and when I tried it on my Laptop it keeps giving the same error over and over.
The big problem now is that I lost my original IMEI (whis is stupid of me not talking note of it before doing anything else), and I threw my box long time ago.
I'm gonna try the link you gave me and let you know how it goes. Thanks.
Hi @Teddy Lo, so I tried flashing again and I didn't get "Sahara fail" this time but instead I got "Firehose fail".
Oh well guess I'll be visiting Vivo .
Thanks again.
SOLVED.
I went to Vivo service center and told them to wipeout everything and downgrade firmware to the previous version and they did it in 20 minutes.
Now my phone is working normally and they got my IMEI back.
Admin please close thread.