Related
I'm trying to fix my boss's phone.
Phone won't get past LG logo. Tried connecting with adb and device is not being recognized, although when I reboot into "emergency mode" and connect via usb, I get a prompt on my Mac asking if I'd like to use the phone as a modem.
The phone is not rooted and used normally. It just happened out of the blue one day. No exposure to moisture or drops.
Is it possible to flash the stock rom/factory restore without root access?
Any help would be greatly appreciated.
Try to do a wipe
Press Home+Vol_down+Power in this order when you start the phone, and hold them during the LG logo
Wipe won't work, as the phone is on stock ROM (no custom recovery menu). But there is a way - read this. It's a lot to read and a few more links to follow, but it will pay off, because it works.
yep. it works 100%. I bricked my o1 3 times already and it worked for me every time.
You may be able to restore your phone to factory settings by pressing and holding the Home button and Vol down while pressing the power button. It will enter in recovery mode (stock roms have a sort of recovery where it restores you phone to factory state). It will reinstall your os and native apps, but you will no longer have your contacts, sms, pictures etc...
If not, just go with what masteryx told you.
Ok, so I rooted my LGOG E970. I figured I better unlock it as well, so I used FreeGee and unlocked it. I tried to download CWM but it said it couldnt download file. So I thought I would reboot my phone. Now, all I get is the google logo, with the unlocked key underneath, and it then goes to the LG logo and back to Google and shuts off. I tried to hold down power and volume down, nothing, and power volume up nothing.:crying:
any ideas? Thanks in advance! I love this phone!
CJ
You too, huh?
I did this the other night, and when the CWM failed to install I went to download it myself... That's when I saw that CWM for geeb is 6.0.3.8, not 6.0.4.5 like FreeGee shows. (Looks like FreeGee has moved on to targeting G2 or another... Oops.)
I hope you backed up your EFS, because mine was screwed up and I needed to manually restore it from the backup I'd taken. (I've had my phone rooted for 9+ months, finally got fed up with stock and was looking to get onto a 4.4 ROM)
So here's what I did:
Held power button until phone was properly off (failed boot seemed to be a still partially on state)
Held volumn up first, then started holding power.
When phone vibrated slightly, I let go of power and kept holding volume up... You should be in boot loader now.
When your phone is in the bootloader, connect to your PC (Make sure you have the proper drivers if you use Windows; I use Linux which doesn't have the same nonsense setup for drivers like Windows does)
Make sure "fastboot devices" shows your phone and then type: fastboot flash recovery _____recovery file name.img____
Press volume down twice to select "Recovery", and press power once to select it... You should be booted into the recovery that you just installed.
Once you're in a recovery, you can push a ROM zip via ADB, flash, wipe data/dalvik cache and reboot.
thanks, Just a little more help
aedren said:
You too, huh?
I did this the other night, and when the CWM failed to install I went to download it myself... That's when I saw that CWM for geeb is 6.0.3.8, not 6.0.4.5 like FreeGee shows. (Looks like FreeGee has moved on to targeting G2 or another... Oops.)
I hope you backed up your EFS, because mine was screwed up and I needed to manually restore it from the backup I'd taken. (I've had my phone rooted for 9+ months, finally got fed up with stock and was looking to get onto a 4.4 ROM)
So here's what I did:
Held power button until phone was properly off (failed boot seemed to be a still partially on state)
Held volumn up first, then started holding power.
When phone vibrated slightly, I let go of power and kept holding volume up... You should be in boot loader now.
When your phone is in the bootloader, connect to your PC (Make sure you have the proper drivers if you use Windows; I use Linux which doesn't have the same nonsense setup for drivers like Windows does)
Make sure "fastboot devices" shows your phone and then type: fastboot flash recovery _____recovery file name.img____
Press volume down twice to select "Recovery", and press power once to select it... You should be booted into the recovery that you just installed.
Once you're in a recovery, you can push a ROM zip via ADB, flash, wipe data/dalvik cache and reboot.
Click to expand...
Click to collapse
I try to go to recovery and it just goes blank. What program with my crazy windows would be best to get a stock file to the phone? Or any other ideas>
thanks again
ZombieGeek said:
I try to go to recovery and it just goes blank. What program with my crazy windows would be best to get a stock file to the phone? Or any other ideas>
thanks again
Click to expand...
Click to collapse
Yeah, the stock recovery won't boot if you try it either. I forgot to tell you that. If you drop in a custom recovery (TWRP or CWM), it will work fine and you can both create a backup of your data and flash a new ROM...
If you want to try to get back to stock, LGNPST is what you should try. But to be completely honest, I don't know if you can LGNPST from the state that it's in. I haven't tried, and I'm using a custom ROM now (the whole reason I unlocked the bootloader to begin with).
bummer
aedren said:
Yeah, the stock recovery won't boot if you try it either. I forgot to tell you that. If you drop in a custom recovery (TWRP or CWM), it will work fine and you can both create a backup of your data and flash a new ROM...
If you want to try to get back to stock, LGNPST is what you should try. But to be completely honest, I don't know if you can LGNPST from the state that it's in. I haven't tried, and I'm using a custom ROM now (the whole reason I unlocked the bootloader to begin with).
Click to expand...
Click to collapse
again, thanks so much! you are my hero, only problem is, I loaded the kit kat bu houstonn and now I have no cellular? I hate it when your phone isnt a phone lol
ZombieGeek said:
again, thanks so much! you are my hero, only problem is, I loaded the kit kat bu houstonn and now I have no cellular? I hate it when your phone isnt a phone lol
Click to expand...
Click to collapse
Yeah, I got that too. I don't know if I got it fixed due to changing ROM, using the suggested recovery from the ROM, or if it was due to me restoring my EFS backup.
I flashed the TeamWin recovery found in the PSX instructions. Then I flashed PSX + Latest kernel + Banks Gapps + Banks Google Camera + AT&T NFC fix + SuperSU. I manually restored EFS from an ADB shell while in recovery.
When I booted I had: LTE works, Wifi works, NFC works, Camera works, ART works... The only things failing for me are the following:
Cell provider shows up as "Maritime" (display bug; as mentioned, LTE works fine and I'm on AT&T)
Settings > Developer Tools > Geeky Process Stats (does nothing)
Settings > Lockscreen > Slider Shortcuts (crashes as soon as I tap the middle ring)
LogCat is spammed with "QCOM PowerLock: Failed to acquire lock" whenever my finger is on the screen.
/system/xbin/mount --bind doesn't work (neither does mount -o bind). It gets sorta half-way-there, because the target directory can't be removed, but isn't bound properly it seems.
Other than that, it's been fast and smooth.
I was doing a backup with TWRP and everything seemed to go just fine. Then after a reboot i unlocked the phone to notice that it was leaving the lock-screen icons on the bottom of the page. I still had access to my notification bar and could clear notifications. Figuring that there had just been a mistake in the boot process, I held the power button to restart the phone. Well it never brought up my power menu to restart. Also instead of making me wait ten seconds until it flashed its lights and restarted, it just restarted in like 3 seconds. Now my phone is stuck on the HTC ONE screen and will not respond to anything including hold the power button.
My phone is rooted an s-off. I know that I have not posted at all on here, but I have been rooting and know how at least the basics on adb shell. I just have never had a phone lock up to this point. If I can at least get to recovery, I should have 2 or 3 backups to run. I just don't want to have to wait for the phone battery to die just to hope I can get to recovery.
TugboatTony said:
I was doing a backup with TWRP and everything seemed to go just fine. Then after a reboot i unlocked the phone to notice that it was leaving the lock-screen icons on the bottom of the page. I still had access to my notification bar and could clear notifications. Figuring that there had just been a mistake in the boot process, I held the power button to restart the phone. Well it never brought up my power menu to restart. Also instead of making me wait ten seconds until it flashed its lights and restarted, it just restarted in like 3 seconds. Now my phone is stuck on the HTC ONE screen and will not respond to anything including hold the power button.
My phone is rooted an s-off. I know that I have not posted at all on here, but I have been rooting and know how at least the basics on adb shell. I just have never had a phone lock up to this point. If I can at least get to recovery, I should have 2 or 3 backups to run. I just don't want to have to wait for the phone battery to die just to hope I can get to recovery.
Click to expand...
Click to collapse
Are you saying volume up + power button does not restart your phone nor does any help? Check if your phone is detected in computer and if so you can issue and adb reboot command
also since there is no removable battery HTC added a reboot function press home vol down and power that should do the trick
The phone is not detected by a computer, nor will it charge. Vol down and power is not cutting it off. Right now I am waiting for the battery to die so I can hopefully boot into recovery and do a restore.
Vol up + Power was the key. I was thinking it was volume down. Thanks for all your help
TugboatTony said:
The phone is not detected by a computer, nor will it charge. Vol down and power is not cutting it off. Right now I am waiting for the battery to die so I can hopefully boot into recovery and do a restore.
Click to expand...
Click to collapse
Its volume up mate + power not volume down
pradeepvizz said:
Its volume up mate + power not volume down
Click to expand...
Click to collapse
Hi Do you have a HTC one max stock Rom I could use??
Thanks
mini88448 said:
Hi Do you have a HTC one max stock Rom I could use??
Thanks
Click to expand...
Click to collapse
There have been lots of request for this, ill upload a stock rooted ROM soon.
pradeepvizz said:
There have been lots of request for this, ill upload a stock rooted ROM soon.
Click to expand...
Click to collapse
OMG THANK YOU SO MUCH!!!
:victory::victory::victory:
Just wanted to point out I ran into this issue also (Stuck on white HTC boot screen) after wiping my ROM and Vol UP + Power did the trick for me also (and then Vol Down + Power to get back to the bootloader).
i need help, guys
so attempting to install a new rom, i must have dont something wrong because now restarting the phone will leave me on the htc logo loop and restart. i still have access to hboot and fastboot. but when attempting to load into twrp, it shows the team win logo for half a second and then restarts the phone. then i installed cwm and it does boot into it but whatever option i pick, install zip, wipe data, ANYTHING, restarts the phone.
i have no idea what to do. i tried installing a rom using adb sideload but it stops at around 80%, ive tried installing different versions of twrp and cwm and same thing. i think it is bricked. im using the verizon htc one max. the only option i see left is the ruu toolkit but ive only been able to find the sprint version and then it says that bootloader needs to be locked and i have not idea how to do that from hboot, fastboot, or cwm
attempting to install superuser also fails
if there's anyone here that can help, please, any suggestions will be appreciated. thanks =:laugh:
Sounds like you're flashing the wrong TWRP.
Sent from my Galaxy Nexus using Tapatalk
suieitori said:
so attempting to install a new rom, i must have dont something wrong because now restarting the phone will leave me on the htc logo loop and restart. i still have access to hboot and fastboot. but when attempting to load into twrp, it shows the team win logo for half a second and then restarts the phone. then i installed cwm and it does boot into it but whatever option i pick, install zip, wipe data, ANYTHING, restarts the phone.
i have no idea what to do. i tried installing a rom using adb sideload but it stops at around 80%, ive tried installing different versions of twrp and cwm and same thing. i think it is bricked. im using the verizon htc one max. the only option i see left is the ruu toolkit but ive only been able to find the sprint version and then it says that bootloader needs to be locked and i have not idea how to do that from hboot, fastboot, or cwm
attempting to install superuser also fails
if there's anyone here that can help, please, any suggestions will be appreciated. thanks =:laugh:
Click to expand...
Click to collapse
May I suggest following these instructions?
http://forum.xda-developers.com/showpost.php?p=51753483&postcount=129
If you're able to complete those instructions outlined in that post, this should set you up with the latest HBOOT, Radio and TWRP (Recovery) for the Verizon HTC One.
Make sure you read the post fully before you start, especially this part:
fastboot flash zip firmware.zip (Be sure it finishes saying 'successful', not 'please flush again immediately'. If it says the flush again, rerun the command)
If you succeed in getting that done, see if TWRP still causes the phone to reboot and get back to us.
How the problem occurred
So a year or two ago I bought a Jiayu G4A/T/Whatever they're calling it and safely got it here. I've used the stock ROM for a bit but I wanted to get rid of the bloatware that was still on it, so I eventually ended up with a properly rooted phone with a ROM from Jiayu.es (Everything worked, have ClockworkMod as recovery, accessible via Mobileuncle Tools), which was essentially a stock Kitkat rom made to work for the phone. Now I got sick of the ROM and recently saw the new EMUI version on Huawei's P8 Lite, so I figured I'd look around for a tailored ROM running that, and ended up at "jiayu-emui-3-0-stable" from Needrom.
What I did
1. I downloaded a ROM from Needrom with identifier "jiayu-emui-3-0-stable" (I can't post external links)
2. Backed up my important files following a guide from androidcentral titled "[Guide] How to Backup and Restore Apps and Data when installing new ROMs" that I can't link,and did a full backup using CWM
3. Placed the ZIP on my internal SD card, went into recovery, wiped data/cache (not dalvik, since it wasn't described in the instructions, I think this might be a probable cause) and installed the new ROM from ZIP
4. Rebooted the phone and now it's stuck in the boot loop I mentioned.
What the problem is
Bootloops aren't that much of a problem usually, except this one is... I can't get into recovery mode. From there on it'd be cake, since I made the right preparations, but I can't get into it. While connected to my PC it keeps powering on, showing a splash screen from Jiayu.es briefly (which shouldn't be present anymore) and powering off after 10 seconds, only to come back to the splash screen.
What I've tried
I've unplugged it, removed the battery, waited to get a full power cycle and tried to hold my buttons in these combinations: [power button + volume up], [power button + volume down] - but neither work. It just keeps going with the boot loop. I can succesfully power it down, and when I plug it in from there it shows the low battery image. At the moment of seeing that I thought I could connect to it using ADB / Fastboot, but no luck there either. It keeps saying no devices found, and with fastboot it keeps on <waiting for device>.
My questions
What exactly can I do if there is no way for me to get into recovery mode? Are there any alternatives? How can I get my device to be recognized by ADB? Is that even possible? Why is this bootloop any different from others?
Update from the massive Q&A thread:
ZipAddict said:
Is it booting up on its own too after being off? This happened to wifes phone and it turned out the power button was stuck. I took a pencil and hit the power button with the eraser a few times and it worked then. Her case mustve dislogded it. I will keep my fingers crossed for u. If not send me a private message and i will look for an answer tomorrow and get back with u
Click to expand...
Click to collapse
Thank you for the reply!
Yes, it does. I took the battery out and let it lay disassembled for a night, after which I cleaned it a little and re-inserted the battery. With the case back on, nothing happened, so the power button wasn't stuck for sure. When I powered it back on with the power button (no USB attached) it showed the emblem for ~8 seconds and powered off. It then buzzes to show it's powered on again and up comes the splash screen again. Could it be that the ROM was just a rebooting falsehood? Why would it disallow me getting into recovery mode? I really hope there is something that can still force the device into recovery mode / interact with it somehow while in this state.
Oh, I also tried to see if the volume down button was broken but all the contacts seem intact, plus, they worked an hour before I started switching roms.
alright guys, so here's the story. just yesterday i bought a brand new lg v10, got it home and the first thing i did was root the device and used ADB to load TWRP following the instructions here on SDA to a T for the ROOT/RECOVERY setup. and it worked. all was fine and dandy, the first time i booted into TWRP via ADB after root i got in, flashed a debloated ROM + xposed and again, everything went fine.. loaded into the OS of the new ROM, went through setup, turned on USB debugging, clicked always allow this computer, installed xposed app yadayadayada. I then, using ADB again, loaded into TWRP. i created a backup there just in case something went wrong with the changes i was about to make and once the backup was complete i loaded back in to the OS. at this point i thought i had done everything right and was confident that if i made system changes that didn't work out i could just flash the phone with TWRP from the backup i made. right? WRONG! ...apparently... so anyways, i made my first change, which was to use a NONROOT app called texdroider or whatever to change my DPI (as i have done with a couple phones previously without much issue) but i didn't take into account that stupid second screen... making the DPI changes system wide, as i'm sure those of you that know this phone are aware, causes the systemUI to crash with an error.. making the OS unusable.. so i tried to load into TWRP by holding the volume down and power button.. but instead it just booted me to the factory recovery.. not TWRP... the phone is unusable within the OS, i can't get the phone to connect to adb to boot into twrp as i had previously, i can't seem to get the phone into download mode, and i can't boot to TWRP and the OS is junk at this point.. but it DOES say on the "LG" screen that the bootloader is unlocked so i'm really hoping i'm not completely out of luck.. but i am not sure what to do at this point. does anyone here know of anything i can try to get into a custom recovery at this point? if i could get into TWRP my SD card in the phone has a backup, the original image, not to mention i could pull the SD card and add anything i need via my pc and then boot back to twrp etc etc and i would have no issue fixing the phone... i really don't understand what i did wrong or why i can't boot to my custom recovery but i'm at a loss.. i'm just looking for a way to force the phone into a custom recovery... or restore the original factory image.. if you have any advice at all i would really appreciate it.
Thanks for reading
**UPDATE** this may or may not make things much easier... but I got download mode working!! so at least there's that, still no custom recovery and i'm currently looking for a KDZ or TOT file to flash via lg flash tool... hopefully that makes things easier..
When you say you got to the factory recovery, what was that, an Android on its side or something asking you to factory reset your device? If it was the factory reset screen, if you select yes and then yes, it will take you to TWRP if you have it installed. If you don't it will factory reset your device.
ngoblirsch said:
**UPDATE** this may or may not make things much easier... but I got download mode working!! so at least there's that, still no custom recovery and i'm currently looking for a KDZ or TOT file to flash via lg flash tool... hopefully that makes things easier..
Click to expand...
Click to collapse
To boot into recovery from power off, you hold volume down & power. When you see the LG logo release and press power while continuing to hold volume down. Then as said above, it come up as a factory reset, select yes each time, and it should boot into twrp, providing you installed it correctly.
Sent from my LG-H901 using Tapatalk
YrrchSebor said:
When you say you got to the factory recovery, what was that, an Android on its side or something asking you to factory reset your device? If it was the factory reset screen, if you select yes and then yes, it will take you to TWRP if you have it installed. If you don't it will factory reset your device.
Click to expand...
Click to collapse
it was a screen asking me to do a factory reset, i click yes, it asks to confirm, i click yes again and then it "successfully" factory resets my phone... it shows the android factory reset symbol that its resetting, then says that its "optimizing apps" and goes through that whole process.. but when it finally loads the "welcome" screen (so i know for a fact that some sort reset has taken place) i get the same "systemui has crashed" error and the OS is unusable and won't connect to my computer.. idk why i can't access TWRP.. i booted to it 3 times before this happened, though never by the hardware buttons on the phone.. everytime i booted to TWRP i had used ADB to boot to TWRP.. what makes me the most sad is that i have a nandroid backup on my SD card... but i can't flash it without recovery.. which i can't install on the phone without getting into the OS..
is there any way to install TWRP or even boot to a temporary TWRP so that i can do so? if i can flash my nandroid i'm saved.. if i can get into a custom recovery i'm saved.. if i can find a .kdz file to flash, i'm saved... if i can get my phone to be recognized by my computer/adb i'm saved.... there simply has to be a way to unbrick this phone...
ZDeuce2 said:
To boot into recovery from power off, you hold volume down & power. When you see the LG logo release and press power while continuing to hold volume down. Then as said above, it come up as a factory reset, select yes each time, and it should boot into twrp, providing you installed it correctly.
Sent from my LG-H901 using Tapatalk
Click to expand...
Click to collapse
well i seem to have somehow NOT installed TWRP correctly because it just proceeds to factory reset my phone.. which for some odd reason doesn't reset the DPI... leaving me stranded... is there any way to get ADB to see my device in its present state? my computer makes the device recognition noise when i enter download mode and i can see it in device manager but not my computer or ADB
I've had this phone just over 2 months but I'm not positive, is download mode the same as the bootloader on this device? If so, fastboot commands should work, and you can flash TWRP again, or do 'fastboot boot TWRP_filename' and it will boot TWRP temporarily.
Oh, and the factory reset just wipes your data, but otherwise doesn't restore your system to factory state. That's why your dpi change remained.
YrrchSebor said:
I've had this phone just over 2 months but I'm not positive, is download mode the same as the bootloader on this device? If so, fastboot commands should work, and you can flash TWRP again, or do 'fastboot boot TWRP_filename' and it will boot TWRP temporarily.
Oh, and the factory reset just wipes your data, but otherwise doesn't restore your system to factory state. That's why your dpi change remained.
Click to expand...
Click to collapse
dude.. then what good is a factory reset?!? like seriously... and yeah, i tried that but i can't get adb to connect in download mode.. the device doesn't show up when I type "adb devices" like it did when i first rooted it. ... and i thought i followed the instructions exactly as it was laid out from this link.
http://forum.xda-developers.com/tmobile-lg-v10/general/guide-how-to-root-lg-v10-easy-t3274699
i think somewhere in there i must have missed something and ended up only booting into twrp temporarily.. which is certainly possible since i never boot to twrp during that initial process from the hardware keys or soft keys.. always through adb.. the phone was already plugged in.. typing the command was a couple keys away..
is there anyway to get TWRP on to the phone now? or am i screwed :'(
Well, it is a factory restore for the average user, because the average person isn't modifying their system. But no, I'm sure you're not screwed. If you're in the bootloader you can't use adb, you're already past that step, so you can skip to the fastboot part. What happens when you type fastboot devices? If the phone shows up then you can either fastboot flash or boot TWRP..
YrrchSebor said:
Well, it is a factory restore for the average user, because the average person isn't modifying their system. But no, I'm sure you're not screwed. If you're in the bootloader you can't use adb, you're already past that step, so you can skip to the fastboot part. What happens when you type fastboot devices? If the phone shows up then you can either fastboot flash or boot TWRP..
Click to expand...
Click to collapse
from what screen should i be attempting this? hold volume up with phone off and plug in to computer to enter download mode? should i try it at the factory reset screen (volume down plus power)? those are the only two screens i seem to have access to.. in download mode my pc/adb just doesn't recognize the phone.. it doesn't show up as a proper device like it did before this whole thing and in that factory reset mode i get nothing.. the download mode seems like its built for LG and runs from different drivers because in device manager it shows up with an error code that it couldn't start the device (this was not the case when i was using adb to unlock the bootloader and then using the bootloader to boot to TWRP..) what am i missing?
and hey, thank you so very much for taking time out of your day to help me. I really do appreciate it.
ngoblirsch said:
from what screen should i be attempting this? hold volume up with phone off and plug in to computer to enter download mode? should i try it at the factory reset screen (volume down plus power)? those are the only two screens i seem to have access to.. in download mode my pc/adb just doesn't recognize the phone.. it doesn't show up as a proper device like it did before this whole thing and in that factory reset mode i get nothing.. the download mode seems like its built for LG and runs from different drivers because in device manager it shows up with an error code that it couldn't start the device (this was not the case when i was using adb to unlock the bootloader and then using the bootloader to boot to TWRP..) what am i missing?
and hey, thank you so very much for taking time out of your day to help me. I really do appreciate it.
Click to expand...
Click to collapse
No problem buddy, and sorry for the confusion. You want to be on the bootloader screen, so here is what you can do: turn the phone off(or remove the battery if you have to, and put it back in), plug the usb cable into the computer only(not phone), hold volume down on phone, plug the usb cable into the phone. That should get you into the bootloader, and then you should be able to fastboot flash or fastboot boot TWRP.
Waiting for a resolution to this thread!
I'm pulling for you from the cheering section. (otherwise known as afraid to do it myself section!)
I'm pretty sure others have come through this exact situation unharmed (I've pretty much read every thread here.) so it's only a matter of time before you get this figured out.
Here's hoping it's sooner than later.
Sorry I can't offer more besides encouragement!
Sent from my pretty nifty brand new LG V10
ngoblirsch said:
from what screen should i be attempting this? hold volume up with phone off and plug in to computer to enter download mode? should i try it at the factory reset screen (volume down plus power)? those are the only two screens i seem to have access to.. in download mode my pc/adb just doesn't recognize the phone.. it doesn't show up as a proper device like it did before this whole thing and in that factory reset mode i get nothing.. the download mode seems like its built for LG and runs from different drivers because in device manager it shows up with an error code that it couldn't start the device (this was not the case when i was using adb to unlock the bootloader and then using the bootloader to boot to TWRP..) what am i missing?
and hey, thank you so very much for taking time out of your day to help me. I really do appreciate it.
Click to expand...
Click to collapse
Hold volume down and plug the cable in, already have completed in terminal.....
Sent from my LG-H901 using Tapatalk
YrrchSebor said:
No problem buddy, and sorry for the confusion. You want to be on the bootloader screen, so here is what you can do: turn the phone off(or remove the battery if you have to, and put it back in), plug the usb cable into the computer only(not phone), hold volume down on phone, plug the usb cable into the phone. That should get you into the bootloader, and then you should be able to fastboot flash or fastboot boot TWRP.
Click to expand...
Click to collapse
planetbeen said:
Waiting for a resolution to this thread!
I'm pulling for you from the cheering section. (otherwise known as afraid to do it myself section!)
I'm pretty sure others have come through this exact situation unharmed (I've pretty much read every thread here.) so it's only a matter of time before you get this figured out.
Here's hoping it's sooner than later.
Sorry I can't offer more besides encouragement!
Sent from my pretty nifty brand new LG V10
Click to expand...
Click to collapse
ZDeuce2 said:
Hold volume down and plug the cable in, already have completed in terminal.....
Sent from my LG-H901 using Tapatalk
Click to expand...
Click to collapse
@ngoblirsch Along with the information provided in these suggestions and what you have said, you need to reinstall your LG/fastboot drivers on your PC while in fastboot mode
YrrchSebor said:
No problem buddy, and sorry for the confusion. You want to be on the bootloader screen, so here is what you can do: turn the phone off(or remove the battery if you have to, and put it back in), plug the usb cable into the computer only(not phone), hold volume down on phone, plug the usb cable into the phone. That should get you into the bootloader, and then you should be able to fastboot flash or fastboot boot TWRP.
Click to expand...
Click to collapse
OH DEAR GOD THANK YOU!!!!
I spent all damn day yesterday trying to figure out how to get to the bootloader on this phone.. everything i read online said to hold volume down PLUS power while plugging it in and it was NOT working lmao. dude, thank you so much. after i read that comment here it took me about 30 seconds to connect to adb and boot to TWRP. This thread can be listed as RESOLVED!
Thanks again!! can't wait to start tweaking this awesome phone!
planetbeen said:
Waiting for a resolution to this thread!
I'm pulling for you from the cheering section. (otherwise known as afraid to do it myself section!)
I'm pretty sure others have come through this exact situation unharmed (I've pretty much read every thread here.) so it's only a matter of time before you get this figured out.
Here's hoping it's sooner than later.
Sorry I can't offer more besides encouragement!
Sent from my pretty nifty brand new LG V10
Click to expand...
Click to collapse
Well I appreciate the encouragement, it sure seems to have helped! Issue has been resolved. ended up that i just didn't know the hardware key combination to get to the bootloader/fastboot mode without being already connected to adb. nothing that i could find online said to hold volume down while plugging it in to a computer. as soon as i was able to do so i connected to adb and it was a breeze from there; I am now back with an OS AND a customer recovery properly installed on the device!! I will be hanging around these forums for as long as i have this phone so i'm sure i'll bump into you guys! absolutely love the community here on XDA, you guys are freaking awesome!!
ngoblirsch said:
OH DEAR GOD THANK YOU!!!!
I spent all damn day yesterday trying to figure out how to get to the bootloader on this phone.. everything i read online said to hold volume down PLUS power while plugging it in and it was NOT working lmao. dude, thank you so much. after i read that comment here it took me about 30 seconds to connect to adb and boot to TWRP. This thread can be listed as RESOLVED!
Thanks again!! can't wait to start tweaking this awesome phone!
Click to expand...
Click to collapse
Glad you got it fixed, and welcome to the V10 device and forums!